UI5 Employee Profile Issue

I am trying to activate SAP UI5 services from Ehp 7 on a sandbox but when I execute employee profile application from SE80 I am just getting a blank page. So far only leave request application worked file. All other ESS and HRPAO applications are not working properly. Either they are coming up blank or incomplete. We are on SAP Ehp7 SP 21.
I am not sure where the issue is. I did debug for many hours but still not able to get past this. Help is much appreciated. I have completed the following setup.
1. All the required odata services and SICF nodes have been activated.
2. SAP NW Gateway is on the same instance as the ECC. SAP system alias in table /IWFND/V_DFSYAL looks like below. "ABC" RFC dest is setup correctly as type 3.
SAP System Alias Local GW For Local App RFC Dest Software Version
ABC ABC /IWSPI/BSFND_731
3. Under SPRO-->SAP Netweaver-->Activate and Mantain Services - all the services have been activated and system alias shows up as ABC.
After completing these steps only the leave request app is working correctly. All other UI5 applications are not working.
Thank you!

thanks Siddharth...I have IE 9 but as you mentioned I tried in google chrome and got the same result. I have gone through the thread you gave before. I do have all the relevant config_id and parameters are set.
However my user does not have any of the UI5 delivered roles for Emp, Manager and HR prof. I am executing these applications at this moment from SE80. Do I still need to assign all the relevant UI5 roles? I didnt do this since leave request was working okay for me. Eventhough its sandbox there is too much hassel for getting the roles change but I do have a meeting with our security team member to grant me some additional access. I will repost when I have those assigned.
I checked the error log using /IWFND/ERROR_LOG and see the below error.
"Data Provider implementation 'ZLAUNCHPAD_0001_BE' '01' '/IWSPI/BSFND_731' does not exist"
but I do see the relevant service under netweaver gateway...maintain/activate services.

Similar Messages

Employee profile issue

Hi
Please help me on the Following Issue:
Issue:
=======
Employee Maria Hernandez (employee id 46037) is coming through to PeopleSoft expenses from HCM without a status or a department. When I attempt to correct it blanks back out. The code from HCM is correct. Please see if there is something in her record that does not allow her to be updated.
Thanks and Regards
Senthil

What are you talking about ? DEMO database ? Which version are you using ? What mechanism is using to move data from expense to HR ?
Nicolas.

Show activities at employee profile

Hello,
I am starting this discussion because of an SAP incident which I created earlier.
The issue of that incident was that I can not see my activities at the employee profile in SAP Cloud for Customer (C4C; Cloud for Sales).
SAP answered that this is not possible at the moment and also not planned in the next releases.
However I think it would be good to see all those activities at the employee Profile.
For better understand please see also attached screenshot.
BR, Roman

Hi Srikanth,
I think you need to do some changes in your Infoset Query through the IMG path as below,
Employee Self-Service -> Service-Specific Settings -> Address Book -> Who's Who -> Who's Who (ESS) Selection and Output.
go through below link for this settings.
http://help.sap.com/saphelp_46c/helpdata/en/5e/c800c84813d311ba490800060d888b/content.htm?frameset=/en/bd/53c8ecaa83d311ae690060b03c9bbe/frameset.htm
Regards,
Mohsin.

MSS: Eventing with Employee Profile/Search

Hi All,
I've followed this blog to event with employee profile iview. In the end, the application does pick the employee selected from Employee Search table, but the issue is, on selecting another employee, the application doesnt pickup the right pernr. The app reacts to the event only the first time when the application starts.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how-toaddacustomWebDynproiViewtotheMSSEmployeeProfile%28ECC+6.0%29&
Has anyone tried this? If so, is there anyother step missing?
Any help is greatly appreciated.
Cheers,
Rajit

Hi Rajit Srinivas,
I have the same requirement where in which I have a custom WD Application.
What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
and how to adopt the team viewer view to your custom WD application....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
I have followed your document also but I couldn't find any information about to plug the teamviewer application into Custom WD development.
Please give me a clear view on how to integrate the team viewer application with custom development WD application.
If code is required pls provide that also.............
I would appreciate the useful inputs with higher points.
Thanks in Advance,
Dharani

My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has initializing problems due to an icc profile issue.

my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

Colour Profile issues between North America and Europe

I have a corporate colour, C80M80Y0K0 which creates a very attractive shade of purple. Within North America all printouts demonstrate very similar variations of that purple colour. We have an office in UK that uses the same collateral pieces. While they preview correctly on screen, they are unable to reproduce that purple in their office or with their professional suppliers (all digital processes). The resultant colour is blue (approx C92M68Y18K0).
The files are created in Indesign, using a process colour within Indesign, and then exported to a PDF and shared with the UK office.
My guess is that it is a colour profile issue - has anyone else had this same issue, and if it is indeed a colour profile issue, what profile would you recommend using? I've tried using some of the other default profiles within Indesign but with no luck.
Any assistance would be really appreciated.

The resultant colour is blue (approx C92M68Y18K0).
What preset are you using for the Export, or what are the Output settings? Have you tried PDF/X?
PDF/X-4 will leave color unchanged and profile everything, so a color change like you are describing most likely means the wrong output profile is being used in the UK.
PDF/X-1a forces everything into your doc's CMYK space and makes conversions at output less likely—with X-1a your 80|80|0|0 mix will probably be output unchanged.

How-to add a custom Web Dynpro iView to the MSS Employee Profile

Hello everybody,
i have created a small How-to guide of how to add a custom iView/Web Dynpro application to the standard MSS Employee Profile for ECC 6.0.
The How-to guide can be found <a href="https://wiki.sdn.sap.com/wiki/display/profile/2007/04/15/How-toaddacustomWebDynproiViewtotheMSSEmployee+Profile">here</a>
I hope its of any value.
cheers,
Markus

Hello Luca,
unfortunatelly it wont work. A WDA Application does not have access to the Floorplan Manager for XSS Applications. So until SAP develop an interface, you have to stick for such a task to WDJ.
regards,
Markus

MSS "Employee Profile Information" Personalization

Hi all.
I´m trying to make some personalization in the "General Data" iView at the "Employee Profile Information" page of the MSS with the "ctrl + right click" method... But no modification remains. I make it, save it, but... When I preview the page again... Everything is as in the beginning.
Does anybody know why this happends and what can I do??
Thanks a lot in advance... Points, after the stuff

Module: MSS
Page: General Information
iViews: Employee Search
Personal Data
General Data
Monitoring of Days
Absence Days
Photo
(If you want PCDs or any other info... Ask me again)
Thanks a lot for your time.

General Data iView under Employee Profile

Hi All,
I need to change the General Data file under Employee Profile in MSS.
The file name is: com.sap.pct.hcm.eeprofilegeneraldata.par
Right now the display under GEneral data in portal shows positon name but i need to show the position Number also..the concerned JSP file inside the above said PAr file uses Java class method like data.getPosition() to fetch the position name.
NOw i am not sure how and by which method i can fetch position number too and display it.
COuld anyone help/advice..
thanks

Hi Mate,
quite new to these things..but i extracted my par file via WINRAR and i have to change my JSP page..i am able to change it but thing is i don know which method i have to use to fetch the posiiton number.
The JSP code is like this -
<%@ page import="java.util.ResourceBundle"%>
<%@ taglib uri="htmlb" prefix="hbj" %>
<jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean" />
<jsp:useBean id="cKey" scope="request" class="com.sap.pct.hcm.orgmanagementeventing.CKey" />
<hbj:content id="myContext" >
<hbj:page>
    <%= cKey.getJavaScriptForURLCaller() %>
    <% ResourceBundle rb = componentRequest.getResourceBundle(); %>
    <%
        String payType;
        String payArea;
        String payGroup;
        String payLevel;
        if(data.getCompensationType()==data.TYPE_PAY_SCALE){
            payType = rb.getString("pay_type");
            payArea = rb.getString("pay_area");
            payGroup = rb.getString("pay_group");
            payLevel = rb.getString("pay_level");
        } else {
            payType = rb.getString("sal_type");
            payArea = rb.getString("sal_area");
            payGroup = rb.getString("sal_group");
            payLevel = rb.getString("sal_level");
    %>
    <hbj:form>
          <%= cKey.getHiddenFormField() %>
          <%= cKey.getJavaScriptForEventReceiver(componentRequest, myContext.getCurrentFormId()) %>
          <table border="0"><tr><td colspan="7">
              <hbj:textView text="<%=data.getName()%>" design="HEADER2"/>  <hbj:textView text="<%=\"(\" + data.getPERNR() + \")\"%>" design="HEADER3"/>
          </td></tr>
          <tr><td colspan="7" height="5px"></td>
          <tr>
            <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_contract_data\")%>" design="HEADER3"/></td>
            <td>   </td>
            <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_communication\")%>" design="HEADER3"/></td>
          </tr>
          <tr>
            <td><hbj:label id="la" labelFor="a" text="<%=rb.getString(\"work_contract\")%>"/></td><td> </td><td><hbj:textView id="a" text="<%=data.getWorkContract()%>"/></td>
            <td></td>
            <td><hbj:label id="lb" labelFor="b" text="<%=rb.getString(\"email\")%>"/></td><td> </td><td><hbj:link id="b" reference="<%=\"mailto:\"+data.getEmail()%>" text="<%=data.getEmail()%>"/></a></td>
          </tr>
          <tr>
            <td><hbj:label id="lc" labelFor="c" text="<%=rb.getString(\"hire_date\")%>"/></td><td></td><td><hbj:textView id="c" text="<%=data.getEntryDate()%>"/></td>
            <td></td>
            <td><hbj:label id="ld" labelFor="d" text="<%=rb.getString(\"office\")%>"/></td><td></td><td><hbj:textView id="d" text="<%=data.getOffice()%>"/></td>
          </tr>
etc etc----
if you see here they are using method like getEmail() etc for displaying data on front end screen.
at the top of this file there is a bean file included -
<jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean"
this must be having all methods..bt i don know where this bean file can be acceessed? i cant see it anywhere in my extracted PAr file.
The only requrement of mine is to display postion number next to the text(text is already getting displayed)..

MSS Employee Profile

Hello,
We are implementing MSS on Portal. When a Manager views the Employee Profile for a particular employee and goes to Miscellaneous Tab -> Organizational Assignments -> History it shows the Manager's Communication information like Phone Number and Email Address.
It should display employee's communication data instead.
Any help would be highly Appreciated.

It should be the employees, Please can you check if you are using standard launcpad entries for MSS users 1972195 Manager is not able to view Employee#s Profile in M 1972102 Adding Exceptions to the method signature

Customer wise employee profile

Hi,
The requirement is slightly peculiar and i don't have any clue if this is achievable.
We have 3 profiles in our organization lets say:
Profile1
Profile2
Profile3
All the employees in the organization have any one of these profiles (defined in HRMS). These profile needs to be associated with a customer for bill rate definition. For example for
Customer A - profile1 will be 30$, profile2 will be 40$ and profile3 will be 50$
Customer B - profile1 will be 20$, ,profile2 will be 25$ and profile3 will be 45$
Customer C - profile1 will be 15$, ,profile2 will be 25$ and profile3 will be 35$
When I create a project for Customer A, and allocate resource, the bill rate should be automatically picked up for each employee-profile as defined against Customer A. Similarly it should happen the way we create project and allocate resource for other customers too.
How is this achievable?
Thanks.
Anand

Hi
You may use the Labor billing extension.
This extension is called by the process GDR when the billing method is WORK. This extension will return the bill rate based on a custom logic you may code.
We are using a similar method.
You may set up bill rate schedules names for the various customers.
You may also setup jobs, even though they are not assigned to employees.
Populate the bill rates values on the bill rate schedule, per job (equivalent to profile).
Alternatively, we created a custom table with rate schedule name and bill rate per employee profile.
On the project billing options you can assign the bill rate schedule.
Then go and develop the extension logic, so for the employee on the expenditure item it will select the profile in HR, and for the project will gather the bill rate schedule name. Then find the bill rate of the employee's profile on that schedule. This bill rate is the output returned by the extension to the GDR process to multiply by the EI quantity of labor hours.
Dina

Remove fields from OrgChart extended employee profile

Hello experts,
I would like to remove two fields from the Extended Employee Profile from all Herarchies: "Address" and "Place of birth".
I reviewed the Details Designer from the AdminConsole but I see they are part of a data sheet so I guess it is not as easy as untick them to be removed. Any guidelines where I can deleted them from the details panel?
OrgChart 3.0 SP2
Build 0702019400
Any assistance would be helpful.
Regards,
Ana

Hi Ana,
Try ..\AppResources\detaildataconfiguration\SAPPositionIncumbentsInfoDetailsConfig_Data.xml - there is a fieldset called EmployeeDetailData that contains the fields.
Best regards,
Luke

How to hide standard Iviews in MSS employee profile service

Hi ,
I am on MSS Add on 1.0 .
when I click on Team then employee infomration then employee profile.
I can see details of employee. How to hide additional information like salary data , compensation information, apprisal which is part of standard delivery.
Please see attachment.
Regards,
Vijay

Package PAOC_MSS_PROFILES_WDA Config ID HRMSS_EMP_OVER_PROFILE Application name is HRMSS_EMP_OVERVIEW_PROFILE and there you can delete as shown in below blog for similar case. http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2012/04/25/mss-homepage-customisation http://scn.sap.com/thread/3486553 http://scn.sap.com/thread/3554348

Hide Overview & Miscellaneous from Employee Profile in Team View

Hi all,
I want to hide everything other than Short profile in Employee Profile in Team View(MSS)
How can I do it.?
Thanks,
Namsheed

Hi Jwala,
Thanks for giving the path where it lies. Now if I want to delete or hide the overview & miscellaneous from short profile. what I need to do.
In configuration of short profile, I have got the following :
If I delete compensation field from here, will it get deleted from ESS Employee short Profile as well.??
In Configure display of short profile,
I have got the following screen :
Here the pixel value is given. If I reduce the pixel, will my requirement will get satisfied.
Pls advice what I need to do.
Thanks,
Namsheed.

ECM Planning-error in Employee profile view

Hi,
When i try to view an employee profile from Compensation view of MSS, i am getting the following error.
Salary Development: An error occurred while the data was read
I could see some data under other tabs like-Comp Guidelines,LTI,comp eligibility. But under SALARY DEVELOPMENT and SALARY SURVEY DATA, its showing as "no data available"
We did not configure any job pricing data.Is this related to that config???
Thanks
Anjani

Hi experts,
Can anyone suggest me any solution for this(apart from hiding the respective field).
Thanks
Anjani

UI5 Employee Profile Issue

Similar Messages

Maybe you are looking for