Uifont.ali - report server problem

Dear All
I have customized system on oracle 10g ( English interface and reports ) , the company want to make the system in both (Arabic and English) , i make every thing is okay , but the problem when i change the PDF subset in the file uifont.ali to include Arabic fonts , the report server every 2 hours stopped and give me the message ( server is in progress ) , how i can solve this problem ????

Hello,
Have you applied the latest patch for Reports 10.1.2 ?
Patchset 5983622
Description PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE
Product Oracle Development Tools
Release 10.1.2.3
+ Oracle Reports "bundle patch" : Patch 9774440
There are some known issues in Oracle Reports when using DESFORMAT=DPF and Font Subsetting ...
Regards

Similar Messages

RWServlet & Reports Server PROBLEM

I have Ora8i, 9ias & reports6i.
Forms Servlet Listener is up and running fine. However I keep getting the "Unable to communicate with the Reports Server" error. I have been through just about every post, note, bug and document I can find and nothing I have tried works. I've seen numerous mentions of inserting TNS_ADMIN into various config files, none of which made a blind bit of difference. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

hello,
check, that you have the alias for your reports-server added to your TNSNAMES.ORA files.
TNS_ADMIN is an environment var. that allows you to point from different oracle_homes to a single TNS CONFIGURATION.
in case you still have problems, i would contact oracle support services.
regards,
the oracle reports team --pw

Bind to report server problem

hello all
please i want your help of my case that iam trying to run areport from aform both are (10g).
the problem is when calling the report from a button in aform with this code in the ''when_button_pressed'' trigger
web.show_document('http://localhost:8889/reports/rwservlet?&report=c:\MODULE2.jsp&destype=cache&desformat=PDF&userid=scott/tiger@ahmad');
it generates for me aweb page with an error (REP-51002: BIND TO REPORT SERVER FAILD).
The advise presented from reports builder help is to make sure that the Reports Server is running and that the Reports Server name is correct.
so i make from run the following test ''rwserver'' it gives me aprompt with a message (please consult the installation guides for how to setup and run this program).
so please please help find the solution.
note: when i try to run the report from the report builder it works good and generates the report properly both paper layout or web layout.

Thank u so much rajesh for your advises and help.
i have tried your steps you have written in the last theared on my pc and on another pc has the same (10 g release) and project and i got the following results:
1.For the scond pc evry thing was good and works properly. when performeing the command (rwserver server= rep_server) it intializes the report server and starting it very well and calling a report from aform goes well. and when running your form REPORT_SERVER_LIST.fmx it gives me the results for list of rep servers started.
But on my pc which has the problem when running the command (rwserver server= rep_server) it starting the rep server for a 1 or 2 seconds then quickly shutdown the report server alone.
when trying again and again when starting the rep server it gives a windos error msg says (connot delete file ''rep_repservername'') and shut down the rep server.
can u please rajesh explain for me wy it is happening?
i have tried to solve the problem so i vave opened the (Devhome\reports\server\) and and i found the reports servers files thier. i have recognised that that those files is (.dat) files and was considered the (Windos media player 10) as the recomended program to open . Do you think Rajesh that the (Windos media player 10) desabling the report servers and shutdown it??? becuase i have so that no recomended progrom to open in the good pc.
please rajesh help>>>.
ahmad salem

Oracle 10g Reports Server - problem authenticating against DB

I have a problem with Oracle 10g Reports server authenticating against an Oracle RDBMS.
When I try to run reports, an authentication form screen is presented, with the password field empty (the URL in explorer that loads this page contains the username and DB instance, but is missing the password) and the following error message:
REP-51018: Need database user authentication
When the password is entered into the empty field in the form and submitted, another 2 authentication errors are given.
REP-51018: Need database user authentication
REP-12545: java.sql.SQLException: ORA-12545: Connect failed because target host or object does not exist
When the URL in the browser location field is manually altered to include the DB password, the reports are authenticated fine.
Any ideas which config file I should be looking in?
Any pointers would, of course, be much appreciated.
thanks,
Brian

Hello, i finally have discovered what was happening, it has to be with the way FreeBSD passes the password field. By default FreeBSD passes the password field with a '*' while Oracle Linux (and Red Hat clones) expect an 'x' to look into shadow maps (Linux uses the '*' character in the password file to not allow login to that user).
To solve it the password field served by the NIS server must be substituted, which is accomplished with nsswitch.conf and adding a line to the /etc/password file on the NIS Client, so the final files will look this way:
# nsswitch.conf (compat directive allows us to use the '+' sintaxis in /etc/passwd file)
passwd files compat
# /etc/passwd (just add at the end of file)
+:x:::::

Very weird report server problem

Hello gurus,
I'm currently facing werid problem.My report server status is UP and running.But I try to access the showjobs url, the page shows *500 internal server error* or cannot bind to report server errors.
I have enabled traces and actually found out that report sever engines are actually running,picking up reports,creating DB connections,formatting pages and dumping into cache folder,like everything normal.All traces show no error or abnormality.
rwdiag command also shows my report sever exists.
I can't understand how is this possible.Please guide me..
I think the problem is with the rwservlet?I'm sure rwclient and rwrun would run successfully as well..
anyone..
Edited by: anandk on Jan 9, 2011 1:00 PM
Edited by: anandk on Jan 10, 2011 10:55 AM

Hi there
Just would like to know if you have change some file configuration like httpd.conf,rwservlet.conf or ias.porperties?
Actually you report server is running file but this is host naming issues.
Provide me what you did so i can help.
Thanks

Report Server Problem

I used rwserver -install repsrv, to install Reports Server and i use rp2rro.rp2rro_run_product(REPORTS,l_v4, SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL) to call a report.
the path of the report is defined with a parameter i define in default.env file.
When the report is in my computer the report runs. if the report is in a mapped network drive i get the message 41214-Unable to Run Report and then 41217-Unable to get Report job Status.
I can't find whats going on. Any suggestions?
Thanks in advance.

The current version of iAS cannot work with network drives. The files must be on a local disk.
I hope Oracle will fix this problem in 9.0.4, since it is highly irritating when you must install your files on all machines if you have load-balanced your applications over several machines.

Oracle report server problem

Hi all
I install oracle application server 10gR2 on THREE servers (windows server 2003)
all the servers on the same doman.
so that means I have three oracle report server on the network.
but when I run the following command (rwdiag -findAll)on one of the servers, it gives me just two oracle report server exist on the network the third on is missing despite that it is up.
And when I execute the same command (rwdiag -findAll) on the same server which contains the report server which I have problem with, it gives me that it is on the network.
by.
Edited by: user1089169 on Apr 15, 2013 11:47 AM

Reports
this is the report-forum. there are the report gurus, which can help you

Cgicmd.dat & Reports server problem

I have problem using key map file to access Reports from the Web.
I have Reports Server configure and used with
rwcgi60 placed at ..Apache\cgi-bin\
It works fine with full url path (eg ..cgi-bin\rwcgi6?server=repserver+report=my.rdf+destype=cache+desformat=html+usedid=me/me@mydb) bu
DOESN'T WORK when using keymap.
I have cgicmd.dat place at ORACLE_HOME\REPORT\cgicmd.dat
Apache is on another HOME.
Does anyone can help ?
null

hello,
did you check the server configuration file ? you have to specify where the server would find the cgicmd.dat file.
regards,
the oracle reports team

Installing report server problem

I am trying to install report server but is not working correctly
It seems that installed fine but zcm still saying its not install, Its running of windows 2008 64 with mssql. So I have run report server diagnostic tool at the is the results
<?xml version="1.0" encoding="UTF-8" ?>
<log>
<cms>ZENSRVR.wgvc.sa.edu.au:6400</cms>
<configfile>./TestClasses.xml</configfile>
<logstarted>Sat Nov 12 17:58:03 CST 2011</logstarted>
<TestClass>TestLogonLogoff
<ItemIndex>0</ItemIndex>
<TestName>Log On/Off</TestName>
<TestDescription>Tests the ability to log on and off with an existing token</TestDescription>
<TestResult>pass</TestResult>
<TestException></TestException>
</TestClass>
<TestClass>InfoView
<ItemIndex>1</ItemIndex>
<TestName>InfoView Test</TestName>
<TestDescription>Tests InfoView</TestDescription>
<TestResult>fail</TestResult>
<TestException>
- Could not retrieve InfoView logon page from localhost:8080</TestException>
</TestClass>
<TestClass>WebIntelligenceTier
<ItemIndex>2</ItemIndex>
<TestName>Web Intelligence Tier</TestName>
<TestDescription>Tests Web Intelligence Functionality</TestDescription>
<TestResult>pass</TestResult>
<TestException> Scheduling of Web Intelligence Report has successfully Completed</TestException>
</TestClass>
<TestClass>CrystalReportsTier
<ItemIndex>7</ItemIndex>
<TestName>Crystal Reports Tier</TestName>
<TestDescription>Tests Crystal Reports Functionality</TestDescription>
<TestResult>fail</TestResult>
<TestException>
- Scheduling Crystal Report failed. --Document: " Diagnostic Crystal Report Document Test" not found. </TestException>
</TestClass>
<TestClass>TestStartStop
<ItemIndex>11</ItemIndex>
<TestName>Stop/Start Servers</TestName>
<TestDescription>Tests starting and stopping all servers except the CMS</TestDescription>
<TestResult>pass</TestResult>
<TestException></TestException>
</TestClass>
<logended>Sat Nov 12 18:09:01 CST 2011</logended>
</log>
has everyone got any idea how to fix it thanks Matthew

theking2a,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

ZCM 11 Sp1 Reporting server Problem

Hi after migrating the embedded database to MS SQL 2008 I am facing a problem while generating any report.
The error message is as followed
A database error occured. The database error text is: The server version is not supported. The target server must be SQL server 2000 or later.. (WIS 10901).
I have re-installed the reporting server as suggested by NTS but the issue still remains.
Regards
Abhilash

Hi Craig Wilson,
Thanks for your reply, I guess we specify the DB server address and port detail in /opt/novell/zenworks/share/boe/bobje/odbc.ini file, but in my configuration file there is nothing related to that. Will that be the reason for this problem?
Regards
Abhilash Chandran
Originally Posted by craig_wilson
My Guess is that BOE is having a hard time talking to the SQL server.
Are Dynamic Ports Disabled on your SQL Server for the DB?
Taking a Trace from the Reporting Server, Do you see SQL requests being
sent to your DB Server? (Maybe its using an incorrect address for some
reason.)
On 8/17/2012 6:36 AM, abhilashchandran wrote:
>
> Hi after migrating the embedded database to MS SQL 2008 I am facing a
> problem while generating any report.
> The error message is as followed
> A DATABASE ERROR OCCURED. THE DATABASE ERROR TEXT IS: THE SERVER
> VERSION IS NOT SUPPORTED. THE TARGET SERVER MUST BE SQL SERVER 2000 OR
> LATER.. (WIS 10901).
> I have re-installed the reporting server as suggested by NTS but the
> issue still remains.
>
> Regards
> Abhilash
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Report server problem - REP-110

Hi,
I am running a report server 10g on AIX 5.3.
While executing the URL,
http://192.168.107.205:7786/reports/rwservlet/showjobs
I am getting an error like,
Error
Terminated with error: <br>REP-110: Unable to open file 'rep1'. REP-1070: Error while opening or saving a document. REP-0110: Unable to open file 'rep1'.
What will be the problem. Please help me to solve this.
Regards,
Mathew

Not sure if this helps but have you checked if there is a file called "rep 1" and what rights are set for that file?

Weird report server problem

Hi all,
suddenly my report server started giving me goosebumps...it started just this morning.My report server restarts automatically.But all the reports are working and have even checked via rwrun and rwclient.EM shows report server restarting every second.
It is giving me an error that the report server already exists in the network.*
Exception 56040 (): Server rep_bsliahucom03_bi_dev_install already exists in the network
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java(Compiled Code))
at oracle.reports.server.RWServer.startServer(RWServer.java(Compiled Code))
at oracle.reports.server.RWServer.run(RWServer.java:287)
at java.lang.Thread.run(Thread.java:568)1.no other report server exists with the same name in the n/w.
2.DISPLAY is set correctly
3.checked all files
I have check everything possible and i just cant understand whats causing the issue.
earlier logs said opmn failied in pinging rep server so I even removed that dependency in opmn.xml....this is weird
and rwdiag command shows correct result.
I noticed something weird in traces report trace shows something weird for evironmental variable LDR_CNTRL=MAXDATA=0XA0000000@DSA
but it is set LDR_CNTRL=MAXDATA=0x80000000 in our OAS 10g R2 right?
Guys need help :)
Edited by: anandk on Dec 10, 2009 4:47 PM
Edited by: anandk on Dec 10, 2009 6:06 PM

hi there,
Thanx for replying :)
rwdiag.sh shows correct results.No repeated report server names.
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
(1) Name = rep_bsliahucom03_bi_dev_install : Type = server : Host = bsliahucom03.bsli.com
(2) Name = rep_bsliahucom01_biforms_install : Type = server : Host = bsliahucom01.bsli.com
above shows tow different OAS servers.

Crystal Reports Server problem

Hi,
i'm an administrator but i cann't create new objects in Crystal Reports Server. What's happening?
pls. help

Hi Henk,
What error message are you getting for not being able to create an object, and what exact step were you taking at the time of error?
Hitomi

Oracle 11i Reports Server Problem

When i tried to exploer the Service
Financials Intelligence - Vision Operations (USA)
in Oracle Applications 11i Server. It gives out the following error
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
Can anyone tell me what may be the cause for this error.
Earliest responses appreciated.
Thnks,
Sundar.

I have checked the reports server . It was not running. When i tried to restart the reports server service. It gives the following error message
Windows could not start the Oracle Report Server [Rep_60_vis] on Local Computer. For more information, review the system event log. If this is a non-Microsoft service, Contact the service vendor , and refer to service-specific error code 186.
BTW, Can you please let me know the file name of the Reports Server script so that i can have a look at it.

Reports Server Problem

Past Jobs :
10 OCL_RXCRCLRC_56 Terminated with Error :
BACKGROUND is deprecated. See help for more information. REP-0110: Unable to open file 'OCL_MASTER_REPORT'. REP-1070: Error while opening or saving a document. REP-0110: Unable to open file 'OCL_MASTER_REPORT'.
9 test.rdf Finished opareps Cache rep90blc-oc-web-repo 07/28/06, 12:29:06 07/28/06, 12:29:08 07/28/06, 12:29:10

Cause:     Report Builder tried to open the file shown and couldn't. The possible causes of this error include the following:
Case 1:     The file was not found under the specified name in the specified location.
Case 2:     You lacked the necessary privileges to open the file.
Case 3:     A system error made it impossible to open the file.
Action:     You can take the following actions to correct this error:
If Case 1:     Make sure the file is stored in the specified directory under the specified name. If it is not, change the directory and/or filename as appropriate.
If Case 2:     Make sure that you have the privileges necessary to open the file. If you don't, change your privileges accordingly.
If Case 3:     Consult your operating system documentation or contact your system administrator.

Uifont.ali - report server problem

Similar Messages

Maybe you are looking for