UIloader can't find images

Ok this is my first time useing a forum but I have run into a problem and really need some help dont know if this is where I'm suppose to post it.Here it is building a web site with Flash cs4 and useing a UIloader to bring in my photos and it keeps giving me an error saying ///C |/users/J%/Documents/web%5Fsite/assets/images/portfolio1.jpg URL file not found. The FLA file sits in the same folder I have never had a problem til today. I have checked the UI inspector and made sure the source was right and it was, here is the catch if I rename a photo to a name without numbers  then it see's it but only a few of them???? I need to load 20 of them i'm at my wits end cause this doesn't make any sense to me at all I'm not a Flash master or anything but I know my way around the program to get what I want done,til now. So if someone could please tell me what is wrong that be great

What code are you using for the loading?  What do you use to identify the images that are to be loaded?  What are the names of the images you are loading?  For what you say happens when you remove the number (not sure from where) indicates to me that there is a disconnect in the naming of things.
As added info only: If this is eventiually going to be online, if the html file that will display the Flash is not in the same folder as the Flash file and images, you will need to adjust the targeting in the Flash file to be relative to where the html file lives.  So if the html file is in the main site folder, and the Flash and images are in an images folder, the images need to be specified using that folder name.

Similar Messages

  • Firefox can't find images that are there. ALL other browsers can!! Durrr - it just started happening on live an test websites to which there have been no changes

    Try www.avivastringquartet.co.uk
    You will not see pictures on the index.html page.
    Try it in Chrome,Opera, IE and all is fine
    Look at source and look for image by clicking on <img src="..."- says it can't find image.
    Also Firefox does not follow the CSS standard as the others do.
    Current OS is windows XP

    The pictures appear OK for me.
    With the site on display, click on the site identity button (for details on what that is see the [[site identity button]] article) and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
    This should hopefully resolve your issue, but also see [[Images or animations do not show]].
    Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.
    The encoding for the site is set to "UTF- 8" rather than "UTF-8"

  • Hello.can anyone help me plz i have problem with my macbook air i can't find image capture.

    hello.can anyone help me plz i have problem with my macbook air i can't find image capture. there is nothing in progrem can i reinstall that progrem and how?thanks

    If you can't find it in your applications folder you will need to reinstall your Mac OS X. Take a look at this link, https://discussions.apple.com/message/16478873#16478873

  • Where can I find images like clip art?

    Where can I find images to use like clip art on my mac in mavericks?

    Wow! Really, you just can't? How about all the button art from the previous versions? Can those be found somewhere and imported. The iDVD button art from the latest version (came on the iLife 11 disc) is really sparse! Can you "make" your own button art? Thanks for your help.
    ~Bond

  • Lightroom 3.4.1 can't find images.

    Hi,
    I have genuine Adobe Lightroom 3.4.1 installed on my Windows 7 laptop. Suddenly, it won't recognize any stored images while it displays: "Can't find file". All the images are stored on my computer, and nothing has been removed or put in an other file. The newest imported photos are supported though and Lightroom seems to recognize them. I can edit them as well.
    Does anyone know what's going on?
    Thanks in advance,
    Maarten

    Please post the screen-shot as full-resolution, not reduced size.  Just upload it to the forum using the camera icon near the message edit text-box.  Also, collapse the Navigator image area at the upper left so more of the folder structure is visible.
    In Library, you are seeing a preview computed, earlier.  In Develop LR needs to recompute the preview based on the current settings and cannot because it can’t see the CR2 file.

  • Can't find images in album imported

    I have been using iPhoto for over 10 years now but I
    just bought Aperture3.4 a week ago and i'm still trying to learn how to navigate around.
    I created an album from a memory card but can't find the images inside the album and can't find the flag icon as well.
    What did I do wrong?
    Thanks  guys.

    , I downloaded my images from my memory card and it soon appeared in my Aperture library,
    It is still not quite clear, how you are importing:
    Did you connect a card reader to an USB port, and use Aperture's Import panel?
    When the Import panel showed you the files, that can be imported, did you press the button "Import Selected" in the loer right corner to import the image files to your library, or did you select your photos straight away and created an album from them?
    If you did not press the  "Import Selected" button, you did not actually download any images and the album you created will be empty. Insert your card again and make sure that the files are imported. Then they should appear in a "Recent project".
    Regards
    Léonie

  • Iphoto message can't find image

    I imported 80 photos into iPhoto 11. Ejected SD card properly. Created an album. Now I go to download or copy-off one of the images and it says, "Can't find [IMG1234] reconnected the disk..."
    Why?

    Sounds like you're running a Referenced Library:
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management. 

  • Switching from Windows to Mac - Can't find image files

    I'm helping a friend switch to Mac. Her old PC (Dell) has power issues but the HD is fine. I'm a life long Mac user so don't know where to locate her picture files, the only thing she's worried about saving. I have her hard drive hooked up to my iMac now but can't find the file.
    I've looked in the "My Shared Folder" but that just has some random music files. No photos.
    Can anyone help?

    If I understand the question correctly, you need to look in the pc directory that has your friend listed as the user (not the shared folder). Once in that user's directory look for the folder My Pictures. Odds are, they're in there. Good luck.

  • Acer aspire zs600 recovery error; "restore failed - can not find image path"

    Recently the hard drive in my Acer Aspire ZS600 failed. I purchased a new hard drive and the recovery media disks from Acer's website. However after installing the new drive and running the recovery disks, the third and final disk ejects with the error message "Restore Failed - Can not fine image path: M:\RecoveryImage\install.wim" I have searched these forums as well as the farthest reaches my googling skills will allow and I have not found a solution that works. I am fairly certain it is not an issue with my hard drive, optical disk drive or the recovery media itself. Any insight on this issue will be greatly appreciated.

    i presume that your new HDD was completly clean, you didn't format or create partition prior to use the Acer erecovery medias. in a past thread there was a similar issue and Acer-Justin found the solution, i sent him a PM.

  • Where can i find image for Photoshop CS5- CS6 upgrade?

    I'd like to buy an upgrade of Photoshop cs5 to cs6 version. I didn't find anywhere a download link for installation image.
    Can you give me an advice? Is such an image avaliable?
    Thank's
    Steve

    Purchase CS6 products:
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  • Can't find image for the albumart on my phone??

    Hello everybody!
    I have downloaded an album with mp3-songs through SymTorrent to my N95-1. The thing is that if I browse the folder with the album I cannot find any albumcover. BUT when I start the musicplayer the cover is there automaticlly. Can someone explain how this is possible? I really would like to know because if I put the albumart in any other albumfolder it syncs away when I sync my images.
    /Niklas, Sweden
    Solved!
    Go to Solution.

    I downloaded the album directly on the phone with from a torrent-file. In the torrent-file the albumart is NOT included. If I browse the memorycard with X-plore on my phone with "Display hidden files" to ON i can only see mp3-files. If I browse it on my computer through "Mass storage" I can only see mp3-files.
    In my gallery on the phone I cannot see the albumart either. Since I don't know the filename of it I can't search for it either. I have tried with guessing some words but no success.
    Can the album be stored INSIDE mp3-files? Or is Nokias musicplayer smart and download it for me?
    Thanks
    /Curious Niklas

  • Can't find image display in the IMAQ Vision control palette

    Hi
    I am trying to display an image on the front panel. But i cannot find the image display vi .. according to the manual, it is available from the IMAQ Vision control palette. I have the academic version of LabVIEW 7 express. Does my version have the vi? Thank you
    rsa..

    Hello,
    The IMAQ Display control is a part of the NI-IMAQ driver. This driver is free of charge and can be downloaded from our website by going to www.ni.com/download. Here is a URL directly to the current version of IMAQ: "http://digital.ni.com/softlib.nsf/websearch/CD7EAFE90E9E47398625703000754A12?opendocument&node=132060_US". If you plan on using that control, I would recommend just installing the driver for it on whatever computer you want to use it on.
    Regards,
    Aaron B.
    National Instruments

  • Can't find images in Iweb SEO Tools to add alt-tags!

    Hi everyone. I'm trying to add alt-tags to some images on an iweb site with iweb SEO tools but I can't get it to open the containing folder. I have a gallery set up with 6 categories and, in each of these categories, there are a few images. I navigate to the folder that contains each image (it actually contains 4 - the full sized image and three thumnails for use elsewhere - all of them jpgs) but iweb SEO Tools is just not recognising that the folder contains any images at all! I navigate my way through my file structure and, when I finally get to the containing folder, it hits a dead end and will not find the contents of it. Any ideas!?
    An example of my file structure is as follows:
    RRF
    - Gallery
    - Pages
    - Landscapes_files
    - Media
    - dintonpastures [containing folder for images]
    - dintonpastures.jpg [that SEO refuses to see!]
    Any help would be really appreciated!!

    Photo templates are written in Javascript and cannot be accessed by iWeb SEO. Only images you create on a blank page or without using the photo template (HTML generated). They don't tell you that on Rage's website, in fact I find their advertising misleading in that they claim that you can alt tag "all" images in iWeb. But, it's free software, so you get what you pay for.

  • Lightroom 2 can't find images on my Drobo

    What can I do so Lightroom 2 can find my images in or on my Drobo?
    I get a ? mark beside my folders.
    When I click on a date the images pop up but @ the top of the images the words "offline or missing" appears.
    (I had a virus and had to download LR 2. Now my images can't be found.)
    Thanks

    http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  • FileDataSource can�t find image

    Hello ,
    I got a problem trying to send a email with a image , if i remove the lines wish load the image , i can send the email perfect , but i can�t send with image because the FileDataSource() don�t find the image , i have solved some problems using
       getClass().getResourceAsStream("/" + "Template.txt");But it return a InputStream , and to send a email i need
        DataSource source = new FileDataSource( "simb.gif"  );There is a way to discovery where is my image dinamic ?
    Thank you for your help
    Jean

    getClass().getResource() returns a URL. You should be able to extract a file name from that. But if that image is not in a file (e.g. it's an entry in a jar file) then you will not be able to use a FileDataSource.

Maybe you are looking for

  • How can i find out the last 5 numbers dialed without having the phone

    how can i find out the last 5 numbers dialed without having the phone

  • Difference in idoc adapter header mapping between SP14 and SP19

    Hi All, i have a very strange problem.......i have 2 XI systems : XI-sandbox and XI-dev..... XI-sandbox is on XI3.0 SP19 whereas XI-dev is on XI3.0 SP14........... I have a file->XI->idoc scenario which is same on both XI-sandbox and XI-dev.... in re

  • Storage space running out problem

    I deleted most of my photos, downloads etc. But it still keeps saying that. I can't download anything on google play anymore. Solved! Go to Solution.

  • Question for lmd0 trace file

    Hi All, Our db is 2 nodes RAC db on window 2003 server. The database version is 10.2.0.3 Enterprise Edition. My question is: we have the following messages in our db alert log but when I tried to look into the trace file I can't find the trace file i

  • Failure of BT to activate my Infinity

    Hello all, In October BT phoned and offered me an upgrade to Infinity and Home Hub 5.  I knew that Infinity was available because BT had previously sent me an email and because my neighbours have it, so I accepted the offer.  In early Nov the HH arrr