UK: activate iphone now and port number later

i'm going to go and get an iphone tomorrow but i don't have my PAC number yet from vodafone.
does anyone know if i can activate it now and get a temporary number from O2 and then port my number across in a few days time?

Yes. You will get issued a number to use, then once you have your pac this will take a few days to update your phone to your old number.
I intend to use the initial number to verify how good the O2 signal is in my area before porting, because if the signal is poor then you have 14 days to return the phone for a full refund.

Similar Messages

ICloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

iCloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

Your signature says you have 10.6.8 - is this correct? (It it isn't please amend it to prevent confusion).
Assuming Snow Leopard, iCloud has not been deleted - it was never there. The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
You can set Snow Leopard up to access the email on an existing iCloud account which has been set up on a compliant device, and you may be able to sync iCal using an unsupported (and possibly unreliable) hack, but no other facilities will work. You cannot open an iCloud account on Snow Leopard.
This page outlines the limited use you can make of an existing iCloud account with Snow Leopard:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Preorder and port number over from AT&T?

My contract is up with AT&T. I want to pre-order an iPhone 6 and port my number to Verizon. Can I do this ordering through Apple,com? I'm not sure how this process works...

Personally I would not port right now.
Many people will be pr-ordering and quite frankly there is no phone in the world that I am going to jump through hoops to get.
They will have them in the stores. If you are going to port out from AT&T I would say first wait until Apple has them in the stores (apple stores) and then go in and get one for the carrier of your choice.
I would even go to a Verizon Corporate Store and do the port at the same time you buy the device. This would be the easy way. Are you looking at paying full price? Contract price? Edge Agreement? they are all to be considered.
Good Luck

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

Warp Stabilising is a two part process.
Analysis and Stabilising.
Both have a banner across the Program Monitor during the process ( unless you have turned that off.
Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
You may need to hit "Analyse" Button again.
You should see the number of frames and the estimated duration during this process.

HI there, I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep gettin this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.

I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep getting this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.
Any help will be highly appreciated.
Thanks a lot in advance.
Sincerely,
Uvaldocj@@
Here is a list of the products I am troubled with:
Adobe After Effects CS5 10.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.

I'm having the same issue. And Dreamweaver now crashes after just a few seconds.

Application server name and port number

Hi
Is it possible to get the application server name(ip) and port number at runtime. Becuase i want to open an html file which is in the application server, when a button is pressed by using web.show_document ();
Can anyone guide me please.
Thanks in advance
geethu

application server name and port number

Replacing Host Name and Port number throughout Environments

So I am currently working on a project that have several classes using simple JDBC code. I'm switching all of it to use JNDI instead of what is currently being used. I'm using Weblogic and the plan is to have the code run in a cluster.
Here is a code Snippet of some of the code.
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://hostname:port");
My problem lies in the the "t3://hostname:port" String. I don't want to hardcode that since I know its bad code practice but my question is what is the best way to replace that with the Host Name and Port number as I move environments. Should I have a Class with a Static Variable and just reference that through the other classes or should I put it in some Property file and read the value from there? Any insight into this would be greatly appreciated.
Thank you.

would it be something like this?
Properties properties = new Properties();
          try {
     properties.load(new FileInputStream("src/jndi.properties"));
     String url = properties.getProperty("url");
     System.out.println(url );
     } catch (IOException e) {
     }

Getting host name and port number from application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Getting host name and port number from an application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Getting WLS host url and port number

Hello Experts,
I need to forward an authenticated request to JAAS LoginModule. How can I get wls host name and port numbe in the LoginModule?
Thank you in advance,
Thanks for reading my post

Hi friends.
I have used the last post, but it is not working.
Mat be the API had changed.
What class or interface could give me this data in web dynpro component?
Too, I'm using the SAP NetWeaver Developer Studio
Version: 2.0.16
Build id: 200602130353
Thank you.
Manuel Loayza
Living La Vida JAVA
Edited by: Manuel Loayza Gahona on Jul 23, 2008 6:54 PM

Given raw IP and port number,create a scoket.

Dear All,
Given a raw IP number 126.124.35.41 and port number 1950,how to create a socket? I am going to use
Socket s = new Socket(InetAddress address, int port)
I know the key is to use raw IP to create a InetAddress. But how?
Thanks a lot.
Kevin

By the way, if you like to get InetAddress, you can do it by
InetAddress address= InetAddress.getByName("126.124.35.41");

Iphone Now and then later in other Countries?

If I were to buy an iPhone now from the States and then a year or two later leave the country, I am wondering if I can use the iPhone on a carrier that carries the iPhone? Are iphones registered to a particular country or something?
How about business trips out of the country? I am probably not gonna make any direct calls from my US line.
Keep in mind that I'll use a carrier that's carrying the iPhone in other countries.

The iphone is locked to AT&T and cannot be used with a SIM card from any other provider.
You would have to pay for an international roaming plan from AT&T.

Visual Voicemail gone after upgrade to 2.0 (and porting number)

Anyone else experience this? I upgraded to 2.0 and at the same time I ported the old iPhone to another cell phone number on my account with ATT. The upgrade to 2.0 and porting appeared to go OK as everything else is working EXCEPT when on the phone application, I can not get the visual voicemail button to do anything. I press it and it acts like it is taking some time to open but it never brings up the visual voicemail screen. The phone part works as usual in all other ways.

I upgraded to the pre-release version of 2.0 and it worked fine. Then this morning i tried to update to the official 2.0 and it could not connect to iTunes, and that pinwheel kept spinning. So I pressed home button and power button until it (iPhone) rebooted. Then i connected it to iTunes and it asked me to restore.... So i pressed the option key (in mac, idk what it is in windows) and selected the prerelease version to downgrade to and now its fine. So...... good luck all

How to get the Host name and port number

Hi all,
I am working in xRPM. I need to get the server name, host name & port number for the portal and i need to diaplay as a link in the Workflow step. I cant give the portal link as static, as it will vary depends on the DEV, QUAL, PROD. Is there any FM or class is available, so i can get the server name, port no. for my purpose?.
Regards,
Vinoth

Hi Kanagaraja,
My client has configured the portal and backend in different stack. So when i execute the FM you provided and with class: CL_HTTP_SERVER, CL_WD_UTILITIES, i am getting only the backend host name and port no. not the portal's info. So please help is there any way we can get the portal's info.
Thanks for your reply.
-Vinoth

About localhost and port number

following jdbc:microsoftLsqlserver:// , why is the host name localhost and the port number is 1433? how to change the port number into others? please help
thanks

"localhost" is usually but not always set up as a hostname for current host, and resolves to the IP address 127.0.0.1
You can connect to any host or port you want (that has a database running on that port), just change the values in the connection URL.
If your question is "how can I get SQL Server to run using a different port", you'll need to consult Microsoft's documentation for that.

UK: activate iphone now and port number later

Similar Messages

Maybe you are looking for