UK based Alliance Member looking for local and remote opportunities

Austin Consultants is looking for contract and part
time opportunities in the whole of UK and Europe and remote work for companies all over the world. With the current
exchange rate situation, we have become really cost-effective for our clients in America, Canada, Australia and
Europe. If you are looking for expert advice on LabVIEW and other
National Instruments software development, please don't hesitate to
contact us at info at austinconsultants dot co dot uk. A brief
description of our company is provided below and a link to our website
is mentioned in my signature as well. My personal email is provided on my profile page.
Austin Consultants are the UKs highest certified LabVIEW
specialists and National Instruments Alliance Partner. We integrate
test, measurement and control systems across the industrial sector and
and are experts in LabVIEW,
TestStand, NI VISION, CVI, C, C#, .NET and Silverlight. We
have previous experience with the Tokomak Textor Fusion Reactor, and
have strong
Aerospace and Military background with Airbus, Goodrich and Horstman
Defence. We have worked with companies in the field of Green
Engineering, Research and Innovation, Optoelectronics, Automotive and
Medical device manufacturing.
Message Edited by Adnan Z on 05-14-2010 10:27 AM
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Dear Sir,
I would like to get an opportunity to participate in your upcoming or ongoing projects and work for you as a team member. I am a final year MSc Electrical and Communications Engineering student at University of Greenwich UK. Please give me some task to deliver as my MSc final year project or it could provide results for my project. From this experience I intend to move to enhanced certification level and have an experience of working with professionals in the industry.
My experience of LabVIEW programming and hardware integration is two years plus and I have successfully done my CLAD LabVIEW certification at NI Week last year in London. On my job I was responsible to interact with clients, gather their requirements, suggest suitable hardware modules and then program and integrate to provide deliverable solution.
Please find my CV attached and contact me at your most convenient. I can work in your South East office at Northolt if required.
Best Regards,
Harris Junaid
Cell: 07813 764372
email: [email protected]
Attachments:
Harris_Junaid(CV).docx ‏24 KB

Similar Messages

Terms of Payment for Local and Import Purchase Order

Hello Experts,
I am SAP FICO Consultant, I am given a task of maintaining payment terms for local and import purchase order, I would highly appreciate your help in this regard. I know I can maintain payment terms via OBB8 but I am not sure that how to cover the following scenarios.
1. 100% Advance
2. 50% Advance, Balance in 07 Days (usually balance immediate with delivery is accepted but it is paid in 07 days for the record)
3. 25% Advance, Balance in 07 Days
4. 10% Advance, Balance in 07 Days
5. 30 Days Credit
6. 15 Days Credit
7. 07 Days Credit
IMPORTS
1. 100% Irrevocable LC in advance
2. 100% TT in Advance
3. 50% TT in advance & 50% before shipment.
Looking forward to hear from you.
Regards
Muhammad Yousuf Ali

Hi
<b>All the Local as well as the R/3 data gets stored in the SRM tables ->
BBP_PAYTERM (Terms of Payment, Backend-Dependent)
BBP_PAYTERM_TEXT ( Texts for Terms of Payment, Backend-Dependent)
BBP_TQ02B ( QM System)
BBP_TQ02U (Description QM system)
Also refer to Transaction SLG1 for the log created in this case.</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Looking up Identical EJB both locally and remotely

prior to posting this request, i have read and
attempted multiple solutions to this problem
suggested in the forums to no avail.
if i have the same EAR, which contains both
an EJB Component and a WAR, deployed to multiple
servers, is it possible to look up an EJB both
locally and remotely?
for instance, on the server performing the lookup,
EJB A is deployed. i successfully look it up
via the following call:
InitialContext context = new InitialContext();
Object ref = context.lookup(name);
return javax.rmi.PortableRemoteObject.narrow("EJBA", EJBAClass.class);
subsequently, i try to lookup the same ejb
on a remote server by performing the following
calls:
Properties environment = new Properties();
environment.put("java.naming.factory.initial", "com.evermind.server.rmi.RMIInitialContextFactory");
environment.put("java.naming.provider.url",
"ormi://remoteserver:23791/application");
environment.put( "java.naming.security.principal", "user");
environment.put( "java.naming.security.credential", "password");
jndiContext = new InitialContext(environment);
Object ref = context.lookup(name);
return javax.rmi.PortableRemoteObject.narrow("EJBA", EJBAClass.class);
however, i either receive an authentican exception, saying "user"
doesnt have access to allication "application", or a null pointer
exception int the RMIInitialContext.
on my local application, i have defined my ejbs in the web.xml
as defined by the spec. the ejb component is marked as remote="false"
in my orion-application.xml as well.
the version of oc4j is 1.0.2.2.1.
any directinon on this would be greatly appreciated.
thanks,
ted rice

as a follow up to my own question, using a application
client, outisde of the web application i can
successfully look up my ejbs locally and remotely.
however, from within the web application, i constantly
receive a ClassCastException.
if no one can tell me how to resolve this, could someone
let me know if they have in fact looked up the
same EJB, both deployed locally and remotely, from the
same web application.
thanks,
ted

Houston based Oilfield company looking for part time help

i-Tec Well Solutions, a Houston Texas based company, is looking for someone to set up existing pressure transducers and load cells to work with existing Labview Signal Express software. This should be a short term contract job, which would include:
Wiring up all equipment for easy and frequent use.
Installing software on a dedicated shop computer.
Programing the software for collecting pressure data and force data.
Recommendations for purchasing additional equipment.
Recommendations for purchasing additional equipment to equip existing analog pressure pumps.
Design and build a stand-a-lone shop test cart for mounting/storing all essential equipment.
If interested, please contact Dennis @ [email protected]
i-TEC Well Solutions
5535 Brystone Drive
Houston, TX 77041
web: www.i-tec.no
email: [email protected]

Hello Joe:
Do you need someone on-site? I could offer you remote work with the best pool of designers and DPS experts? We have been using it since the initial publi release in 2011
Email me if you are interested => [email protected]

Vista looking for drivers and BSODs

I bought a 3TB MyCloud device a few months ago. I cannot get it to work properly with my Windows Vista desktop and support refused to help. They remoted in and accessed the device without using their software and claimed it was a Windows problem, not theirs. When I connect the device directly to my Ubee Wireless Router/Switch, Windows Vista immediately sees it as new hardware and tries to find drivers for it. Of course WD does not provide these. In Device Manager, it shows up under Other Devices with a warning indicator because there are no drivers installed. I was able to copy files to the device, but when I try to access them from the device, my Windows Vista desktop gets a BSOD (this happened after the call to support). I've now disconnected the device from my network as the constant BSODs damaged my computer. The device works with my Windows 8.1 computer, but has problems with my Sony Blu-Ray player connected wirelessly to the network. I've posted about this in a different thread. Is there a way to get this working properly with Windows Vista?

Bennor wrote:
The BSOD that other thread talks about appears to be related to using one of the WD apps, my guess is the WD My Cloud Desktop app on their Windows PC. There is a known issue for some who use the WD My Cloud Desktop app where once that app is opened, some users experience Windows Explorer crashing. There is one or two other threads covering this very specific Windows Explorer crashing issue related to that WD My Cloud Desktop app that affects a few users. Generally one does not need to install "drivers" to access the WD My Cloud. One should be able to access the WD My Cloud on their local network via Windows Explorer (NOT Internet Explorer). It will show up in the "Network Neighborhood" or under "Network". If it is not showing up under Network then check the network settings on both the Vista PC, ensuring it has the same Network Name/Network Workgroup (typically "workgroup") that the WD My Cloud uses under "Settings -> Network -> Network Workgroup". The other recommended suggestion is to configure the WD My Cloud for a static IP. Either within the WD My Cloud administration UI or within one's router/gateway. Both the Vista PC and the WD My Cloud should be in the same IP address subnet (for example both should have an IP address in the 192.168.1.x range). If you have not done so read through the WD My Cloud User Manual in particular "Using Windows XP/Vista/Windows 7" under "Getting to the Public Share" for the general procedure of accessing the WD My Cloud shared folders with Windows Explorer on Windows Vista.You and I are worlds apart on this issue. Your solution doesn't relate to my problem. I did not have a problem getting to or seeing the device in Vista. There were two problems and I believe I've cured both of them, though I don't know how. Problem 1: Vista keeps asking for drivers. When I connected the device to my network, Vista would see the device and try to locate drivers as if it had found a new printer. It couldn't find any so I had to close the driver request windows without finding drivers. The device then would show up in Device Manager under Other Devices with a yellow exclamation mark indicating the drivers were not loaded correctly. After several BSODs (for a different issue), I ran SFC and CHKDSK on my computer. Neither program found a problem. Then when I tried to connect the device again, Vista started looking for drivers and I walked away from the computer for the evening. When I had come back, it said the drivers were loaded. In Device Manager, Vista shows a new device category named "Western Digital NAS" with two devices installed: My Cloud Network Media Server and My Cloud Network Storage. The driver problem is now solved but I don't know how. Problem 2: Files I had loaded onto the shares to learn how to use the device can be seen in Windows Explorer. That was never a problem. However, as soon as I clicked on a file, the screen would scramble and then BSOD. This only occurred with files loaded onto the MyCloud device. After some blue screens, I started up into Safe Mode with Networking. I was able to click on the files without crashing, though Media Player wouldn't play them or even start in Safe Mode. I then did a clean boot and it tested okay. As I added items in MSCONFIG, the problem would not recur. There was one item that prevented me from even setting MSCONFIG to do a normal startup, and that was Kaspersky Internet Security 2015. Not only that, but I couldn't start the software at all. I did a complete removal of Kaspersky and then reinstalled it. I no longer have any BSODs. Both issues, as mysterious as they were, have mysteriously been resolved. I have a DLNA issue, but that's in another post. I also have a new issue with the WD My Cloud desktop app but I don't need to use that and if I do, I'll start a new discussion.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

The password is set on the WiFi router providing the service, by the owner of the network to prevent unwanted "guests" accessing the network. The only way to know it is to ask the owner permission to use the network. Otherwise, you have to find a free WiFi hotspot that doesn't require a password.

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?
thanks

System files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/

I had photos uploaded in "My Library" in photoshop express in 2011. I just signed in to look for them and I don't see them anywhere. Were they deleted?

Hi,
I had photos uploaded in "My Library" in photoshop express in 2011. I just signed in to look for them and I don't see them anywhere. Were they deleted?

You can ask in that forum. Photoshop Express for Windows
Gene

What's the deal w/ Pages and Merge Fields. I've spent an hour looking for it and poof it's gone. What the ****?

What's the deal w/ Pages and Merge Fields. I've spent an hour looking for it and poof it's gone. What the ****?

https://discussions.apple.com/message/25419393#25419393
Peter

Found a burned chip. Looking for name and type.

Hello again, AMB group. I looked for similar pictures/ posts, but I did not find something with the detail here. Anyway, I've got a problem where my hard drive won't even spin up (seems like no power to the drive) but everything else checks out fine on the logic board. Micromat TT and the Hardware Test disk give it OKs. So I went through the process of taking out the logic board looking for problems, and I've found a super duper one. Here is a link to the picture of the burned chip, located right below the processor.
http://fs6.depauw.edu:50080/~jonathanstack/burnedchip.jpg
I've ordered a couple bad logic boards, hoping one of them will have a salvageable chip. But I'm wondering if this is a programmed, proprietary chip, or if I can get one from Newark or something. I think I will take it to an electronics shop to have them solder the new chip on; I don't have a micro soldering iron.
Look forward to any thoughts on replacing the chip. Of course replacing the logic board is a possibility, but you can see this might be cheaper, because a bad logic board runs less than $15 usually.
Bye for now,
JG

Hi J,
Have you tried a different HD and/or tried this HD in an enclosure or another PB? Obviously that chip looks bad, but the motor mechanism or the electronics on the HD could be bad, having nothing to do with the chip.
Was everything working fine (all ports etc.) before this?
Regarding the chip itself: if the HD checks out ok, the chip should be an interesting proposition. I can't recall ever hearing of anyone replacing any soldered on part of a logic board. Even for certified repair shops, the "fix" is to replace the LB, and faulty boards are sent to specialized repair centers with the specialized equipment to tackle the job. I hope you are successful and will post back with results. Good luck.

My iphone 5 not sync over wifi, when i put a song or something is deconecting. Says looking for iphone and deconecting.

My iphone 5 not sync over wifi, when i put a song or something is deconecting. Says looking for iphone and deconecting. i have a old iphone 3gs and its work perfect.

Hi there mistre89,
You may find the troubleshooting steps in the article below helpful.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/ts4062
-Griff W.

Since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says "Wi-Fi: Looking for networks- and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution?

since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

When you expand to show local and remote sites, in DW CS6 how do I get the local to be on the left?

When you expand to show local and remote sites, in the previous verions of DW, the files type (local or remote) selected when not seeing both, automatically came up on the left. I liked local when I am editing and when I am ready to upload I expand to see both local in remote. Before, the one you had selected, in my case local, was always displayed on the left. Now in CS6 when I have local selected before I expand, the local is on the right and remote on the left. For me that is not correct. I find that having local on the left works best for me like reading, left to right, I want the local on the LEFT so I can put the updated from left to the remote on the right.
-->In DW CS6 how do I get the local to be on the left?

Thank you so much! That did it!

UK based Alliance Member looking for local and remote opportunities

Similar Messages

Maybe you are looking for