UK keyboard questions dv6-211sa (Backlit or Textured vs Molded)

Hi my down arrow key has broken and I am looking to replace my keyboard but its been quite hard to find the infomation I would like.
I can see my laptop has the two ports for a backlit keyboard (4 pin and the normal keyboard one) but I am unable to find a part number for this and I was wondering if anyone knew where I could find what is compatible ( long shot question)
If not I am unable to find a link for the differences between the textured and molded keyboards (currently using a textured PN 570228-031) but as I have to replace my keyboard I would like to explore angles
Many thanks for your time

Similar Messages

  • Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.

    Before I go into a lengthy explanation of the problem: Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.
    Thanks much.
    Emile

    Choose Force Quit from the Apple menu and close Mail from there.
    (103661)

  • Keyboard is no longer backlit.

    Keyboard is no longer backlit. Had a problem with click key not clicking, took it to the local Mac store 9/21/11 and they replaced the top (around the keyboard which includes the click key and the speaker grills) of my MacBook Pro (early 2008). Click key now works, but keyboard backlighting does not. However, I am not sure when backlighting ceased. Before repairs (but after installing Lion), immediately after repairs, or more recently. I seldom use the keyboard in dim light. I noticed this a couple of nights ago and have been looking for a solution since.
    Any suggestions on how I can get it working again?
    Thanks.
    P.S. Extended warranty expired 9/21/11.

    Quote from: runningman on 12-March-15, 12:57:22
    You are welcome
    I don't figure out what are the buttons you referred, but I guess you are talking the quick launch buttons or if you can provide the pictures?
    Anyway, to acitvate quick launch buttons you need to install correct SCM version from utility page, and Radio switch driver from driver page.  And it is normal that "Keyboard backlight", "Airplane mode" quick launch button doesn't always light, because they are designed to flash only once when you press it.
    They actually don't work at all, I know they only light up when they are being used before the recovery they worked. I downloaded Radio switch (I have SCM already) before I installed it, it informed me that my laptop has already best driver but I did install it anyway to test,  I restarted then I tried to hit the fan button and the airplane but nothing happen not work/no light.  I am happy that my keyboard has the backlight back again with your help, I no longer feel blind during the night time if there is solution to activate the quick launch buttons it would be great, if not, it's all good really

  • Backlit keyboard for dv6-3322el

    Hello,
    Can I replace my dv6-3322el standard keyboard with a backlit keyboard?
    I saw that on the logic board is the connector for a backlit keyboard. Which keyboard model could be compatible for my laptop?
    Thank you,
    Marco.

    Hi,
    I'm sure of what I'm saying.
    On my logic board there is the connector for the backlit keyboard.
    It 'also a connector for the fingerprint reader and one for a touch screen!
    I am attaching two photos where you can see the connectors I'm talking about.

  • Keyboard and Touchpad Questions - dv6-3155dx

    I recently bought an HP dv6-3155dx from bestbuy.
    Best Buy dv6-3155 link
    I liked almost everything about it except the keyboard layout and how the touchpad functions.
    It says it has an Island-style keyboard. I didn't know what that meant until I got it.
    The left-most keys are not the usual ctrl, shift, caps lock, tab, `~, esc.
    Instead I have a set of keys I will never use.
    Is there some kind of replacement keyboard where those keys are gone or swapped on the other side?
    If not, is there a way to change the functions of those keys?
    (Its really bugging me, since I'm used to pressing ctrl+shift+esc all the time. It's really throwing me off.)
    Next is the mouse.
    Every time I try to left/right-click I notice that the mouse move a bit, causing me to often miss what I'm trying to click.
    I was wondering if there was a way to make it to where if I effectively 'kill'(sorry for the terminology) that area of the touchpad for mouse movement.
    That or only work If I move the mouse from the area above the button lines.
    (There are lines showing where the button positions are.)
    That way the mouse only reacts when I actually want it to.
    Thank you in advance =)

    I had found an alternative keyboard for the DV6 online for about $30.  Don't remember where, I'll try  to find and repost a url.  The hp manuals available online show how to replace the keyboard, FYI.  Looks pretty easy actually.
    Haven't found an alternative touchpad or driver yet.  If you do find something post back.

  • Keyboard on DV6 6069eo

    Anyone that knows how to replace the keyboard on a HP DV6 6069eo, or knows where i can get a manual wich shows how to do it
    This question was solved.
    View Solution.

    read the manual. Be advised it has only the barest information and is written for technicians. Enjoy the ZIF connector. 
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • External keyboard questions

    I want to buy an external keyboard for use when I'm not traveling. I am considering the Apple Wireless Pro keyboard and would welcome any opinions about that one or any others (wireless OR wired) you like or dislike.
    Another question is about mice/trackballs. I was told that the wireless keyboards (at least the Apple) don't have USB, so if that's the case then essentially one is compelled to make two purchases, correct (keyboard and input device)?
    As regards the mouse or trackball, if their control software isn't Intel-native, any reason why it wouldn't work as well on MBP as on PPCs? I've used Kensington in the past but they are, in my view, non-committal about if they plan to spport the Intel Macs re their Mouseworks software. I wonder how important it is whether they do as regards the performance of Mouseworks, I'd love to hear about any wireless trackballs anyone likes.
    Thanks for all the help.
    Richard Huggins

    The Apple wireless keyboard works great for me. There are many others out there, I'd look at Logitech, Kensington, Belkin, Microsoft, roughly in that order. The most important thing is to try them out first to see which ones feel good to you.
    I agree about the battery issue with mice - I use rechargeable wireless mice for that reason. Cost a bit more, but well worth it to avoid the hassle of replacing batteries.
    This battery issue isn't really present with keyboards. The batteries on my wireless Apple keyboards last for a few months at least. The amount of throughput pumped out by a keyboard (and therefore the amount of battery energy needed) is much, much less than a mouse. Moving your mouse a few inches on the screen sends many, many (x,y) events to the computer. Probably a lot more information than it took for me to type this entire post.
    On the mouse software issue, I've never installed the software for mice on my Mac. I used to avoid it unless absolutely necessary on my Windows machines as well. They usually cause more trouble than they are worth, if they work at all. I use my Logitech mouse with the standard mouse driver on MacOS, no problems. The only reason you might want MacOS software support is if the mouse has tons of extra buttons that you really want to map to various actions. I can map many of the buttons on my Logitech mouse with the MacOS preferences panels (e.g., map buttons to trigger Expose and the Dashboard), but I only use 3 of them (left, right, and the scrollwheel button).
    Kensington makes the best trackballs in my opinion. I haven't used one in a long time, but I was always happy with them.

  • T500 keyboard question

    Hi.  I'm new to the ThinkPads -- I bought a T500 for work a month and a half ago, on the recommendation of a colleague, and have just now started to use it for my day to day work.
    After about a week of use, I've noticed that the arrow keys, particularly the right key, has an annoying 'clack' to it, almost as if it's bottoming out.  It's much louder than the rest of the keyboard, which is fairly quiet.
    I've 'googled' this issue and it appears that others complain about "keyboard flex" in the T500.  I'm no connoisseur, and I have a feeling much of what goes on in the discussion (such as http://lnv.lithium.com/t5/T400-T500-and-newer-T-series/T500-Keyboard-and-Flex-How-bad-is-it/m-p/6072...) is beyond my reach.  My simple question is this: is my clacking on the right key a result of "keyboard flex"?
    Also, regardless of the flex question, is there a way for me to resolve this key clacking without sending anything in for repair?  I've made the full switch to this laptop for work, so I really don't want to give it up if it's something I can fix on my own.

    I have not experienced this specific noise, but do not think it would be related to the keyboard flex complaint.  That stems from a gap under the keyboard, mostly on the left side, making it feel spongey and sloppy.
    You should look carefully at the keyboard there to see if that specific key is touching the case itself, something like that.  You might also remove the palm rest screws from the bottom, and carefully remove the palm rest and reset it and the keyboard to see that eliminates the noise.  With the palm reset removed, you should at least be able to see what is causing the noise.
    If the keyboard is bad somehow, they can send you a new one and it won't be out of service.  It's pretty quick and easy to change it out, if necessary.  But an inspection before you call will probably help.
    Don Mannino

  • Simple keyboard question

    In the midst of all the highly technical questions here's a real easy one. I know it exists because exactly what I want is on http://www.apple.com/keyboard/.
    I ordered an english international keyboard from the apple shop thinking that it would be a standard US layout. However the layout is the same as my old (transparant version) dutch layout. See http://gallery.inflatablemouse.com/wronglayout.jpg.
    I want the layout from the apple link above. Does anyone know what I need to order? I ordered an English layout before but cancelled that order because the confirmation said it was a UK keyboard. The only other option I had was the english international.
    Thx!

    There is a chance that the UK keyboard is the one you want, but you'll have to firstly ask specifically to UK owners, so you'd better start a new thread with a "UK keyboard" mention in the title.
    Why the UK keyboard would fit?
    Because it is supposed to be the exact same as the US, the only visible difference being the hash (replaced with a £).
    If I were you, I would ask the UK owners, whether their UK keyboard has the tilde on top-left position (with no key between the left shift key and the Z key),
    or whether their Return key looks comfortably horizontal above the right-shift key, or ridiculously thin and vertical like on your picture of an International model.
    Too bad this can't be checked directly on the Apple UK pages, as they use the same US pictures on every countries' Stores.
    All you have to know, is whether the UK keyboard is a US with a pound sign, or an International with a pound sign.
    If it's a US model with a pound sign, you can order one from Apple.

  • Samsung Stratosphere keyboard questions

    People,
    Is anyone familiar with the Samsung Stratosphere phone? This is my first Android smartphone and I've run into a few problems. Is there a "enter" key on the keyboard? one isn't marked and my phone came with the wrong users manual, plus Verizon doesn't have a users manual posted on any of their pages either. Also, is there a way to go forward, or undo the back button, from the keyboard? Will a stylus work on these Androids, fat fingers suck.
      Browser, how do you bookmark a page on one of these? list of favorites? will these phones accept .pdf's or .docx files in through the data port? I hope there is probably a word.docx reader app somewhere? I cant find it. am having trouble with the Sims card as well, is there some set-up step or is there some procedure to unlock it, unblock it, activate it or something
      To be able to use the Cloud player so many people offer, is that feature limited to the ability to use WiFi? I understand that the cloud service is an online storage for things like music and or movies, what else can be stored online? I can'f find allot of info about this Cloud service.
      I would appreciate even a partial answer to only one question, if anyone feels like responding, but I assume "chat" will be manned come monday and that should answer my questions? I think! thanks again

    Try going here,
    http://support.verizonwireless.com/clc/devices/index.html?p=5728&sayt=stratosphere manual*
    You'll see a pdf link on the left side that says "device manual".

  • RESETTING IPHONE 4 KEYBOARD Question

    What's up all my apple users...Im always tryping some dumb typo in my texts and the phones dictionary kept them so when I write sometimes it spells stupid stuff...and I was thinking about resetting my iPhones keyboard but I didn't want to reset it and then it'll go into the mode where I'll have to plug my phone into the CPU to start it up all over again...and I wanted to know will it disable the auto-correction option...any help and input will be useful and appreciated...thank you

    Great thanks a million...and by the way I had another question if you don't mind helping out...sometimes on the web I save pics to my photo album by holding it for a few seconds until it gives me the option to save the image...and sometimes when they're in my album and I touch them to select them they don't come up I'll have to select the pic before it and slide over to the next one since it doesn't come up when I touch to open it and other times itll be just a white backround with "JPG" in it...is this just because the pics online are posted a certain way or is this the phone?

  • Mac Mini w/ Apple USB keyboard - question about home and end keys

    I purchased a USB white Apple keyboard to go with my Mac mini.
    My question concerns the home and end keys. When I put the cusor focus in a text field or text area, I would expect that hitting the home key would take me to the beginning of the line and hitting the end key would take me to the end of the line.
    That's not the case?
    If a vertical scrollbar is used in the window, then the home key takes me to the top of the window and the end key takes me to the bottom of the window.
    Please forgive me, I've been on a PC for the last 10+ years, so I thought I should ask.
    What key or key combo moves you to the start and end of a text in a text field or text area?
    Thanks,

    923/3369
    Hi Todd,
    Use the arrow keys with the command key (⌘):
    command + left arrow -> beginning of the line
    command + right arrow -> end of the line
    command + arrow up -> beginning of the text
    command + arrow down -> end of the text
    Explore also the option key (⌥) possibilities, with the arrow keys:
    very handy too.
    Yes, the Home, End, Pageup and Pagedown keys are for controlling the whole document, not the text itself.
    HTH
    Axl

  • Another keyboard questions

    I know this question may have been ask a lot. But, I can't seem to get my garageband to recognize my yamaha YPG-225 keyboard. Any ideas?
    thanks

    I think the experts here will be asking you for more information, such as what interface you are using, etc.
    I had a similar problem with getting my Roland FP3 to speak to my iMAC using Cakewalk MIDI-interface. It turns out that the driver software that came with Cakewalk does not support Snow Leopard so had to go to Roland's website to download the appropriate software. Worked perfectly after that.

  • German keyboard question: @ symbol

    I know this is probably a stupid question, but how do i type the @ symbol on my german keyboard? it's on the same key as the letter L but in the lower right hand corner... I just got a new macbook air and can't set it up, because my password involves the @ sign, and I can't figure out how to type it--or don't know if i've typed it, because the password is hidden... help!!
    thanks!

    Press Option and L.
    (58043)

  • Keyboard question fce vs fcp

    Hello:
    Presently, I'm using FCE. I intend to update to FCP for my next project. My question: Are the keyboard functions the same for FCP as FCE? (my understanding is one can program FCP keyboard functions) Or should I invest in another K&B cover for both my IMac G5 and Macbook Pro?? Thanks in advance,
    Russ

    Check out the two links on this thread to see the FCP6 and FCE shortcuts:
    http://discussions.apple.com/thread.jspa?threadID=1973457&tstart=0
    Pretty much all of the FCE shortcuts are applicable to FCP, but there are other ones in FCP that don't appear in FCE.

Maybe you are looking for

  • AiO remote print via HP deskjet 1510

    hello friends! windows phone just launched an app for wireless printing "HP AiO remote" and i have a deskjet 1510, a pc and a router **bleep** modem. so please tell me that can i print with my phone. if yes! how i connect my printer to a network? i t

  • I am not able to burn a cd   from my   mac pro osx  . it tells me no supported software. what do i do

    I am not able to burn a  CD  from my Mac pro OSX 10.6.3.  how do i download the software . the message i get is no supported software

  • Relate image and data

    Hi there, I am still learning to program in LabView, and I need to create a program that will acquire data from 2 cameras and a spectrophotometer.  1. Using a simple GRAB VI i am not being able to save a new image, just overwrite existing ones. Why i

  • How can I restore a folder in SM35 - Very Urgent

    Hi All, How can I restore a folder in SM35 ?, because I created a folder in transaction AFAB and this transaction just process in background (under folder - SM35) and then I deleted this folder wrongly.... I tryed to execute again the transaction AFA

  • Animation Help

    Hiya, any of you guys wanting to offer your amazing skills please? So I wanted to make an animation whereby I have an abstract bird fly from off screen (right side top) to the centre of the page, then turn left slightly to tip a bucket of paint over,