UK T-mobile E51: Possible to WLAN from laptop to i...

Hi, I have an E51 with tmobile Uk and don't want to install pc suite. Is it possible to connect my laptop to the internet (web and walk) via the bluetooth connection on the E51 manually?
I did a search and cant see reference to this.
thanks for any help

Hi,
yes it should be possible. You'll need to pair the two and use dial-up connection service of the phone. Also, depending on operator, you might have to define the access point in the modem's extra initialisation string (at+cgdcont=...something ).
Alternatively, if you had WLAN in your laptop you could try this out: www.joikuspot.com
2110i | 3110 | 6110 | 6210i | 9210i | N95

Similar Messages

  • I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

    I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

    No, you can stop using the account, but you cannot delete it.

  • Is this possible: SNC connection from SAP GUI to SAP Router, and ...

    Hi,
    I have (stupid perhaps) question.
    Is this scenario possible:
    SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
    I know how to set up scenario like this:
    SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
    Best regards,
    Marek Majchrowski

    Wolfgang,
    To be sure myself and Marek understand, can you confirm the different scenarios supported:
    Scenario 1:
    SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
    With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
    Scenario 2:
    SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
    With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
    Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
    SAP GUI -- (SNC conn) -- SAP System
    Scenario 3:
    This is the scenario mentioned by Marek in his initial question:
    SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
    With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
    Thanks,
    Tim
    Edited by: Tim Alsop on Feb 25, 2008 5:24 PM

  • Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

    Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
    a) HP printer with USB port only (no ethernet port) connected to Airport Express
    b) No issue printing from Macs
    Tests
    1) Installed Bonjour 2 - does not find printer (now uninstalled)
    2) Bonjour 3 is listed in programs but no way to access
    3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
    Regards
    Richard
    p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

    This is possible, but not with Bonjour or any other fixes.  It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
    I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

  • Is it possible to switch from the preinstalled iTunesU to the original iTunes on an iPad. If it is can someone explain how to do it?

    Is it possible to switch from the preinstalled iTunesU on my iPad to the original iTunes. If it is can someone tell me how, and is this something that commonly happens?

    I'm not sure what you are asking.  There is no "preinstalled iTunesU" on an iPad.  The iTunes app is a portal to the iTunes Store. Use the icons at the bottom of the page to switch to different sections of the store.  Use the Music app or the Videos app to access iTunes media you have synced to the iPad.
    To learn more, refer to the iPad iOS5 User Guide

  • Is it possible to livestream from a web site?  What pod to I use?

    Is it possible to livestream from a web site?  What pod to I use?  I tried a Web Link and a Share pod but this doesn't appear to work.  I'd like to livestream a time clock.
    Thanks

    Cannon has an App which supports scanning into an iPad from various Pixma printers.
    See here to see details: https://itunes.apple.com/us/app/canon-easy-photoprint/id331269951?mt=8

  • Is it possible to scan from a Canon Pixma MX432 to my iPad?

    Is it possible to scan from a Canon Pixma MX432 to my iPad? I want to be able to scan on the Canon with a .pdf of the scanned document appearing on my iPad (wifi version(  I AM ABLE  to print from my iPad to the Canon using AirPrint.
    I have been unable to find the applicable information on the Canon website, user's manualm etc. Would someone on the Apple support group be able to kindly help me.  Thank you, Dale

    Cannon has an App which supports scanning into an iPad from various Pixma printers.
    See here to see details: https://itunes.apple.com/us/app/canon-easy-photoprint/id331269951?mt=8

  • Is it possible to restore from a backup after initial setup on my iPad air?

    is it possible to restore from a backup after initial setup on my iPad air?

    You don't even have to do to an erase all content and settings.
    Just connect the iPad to iTunes. Once it appears on the left, right click on it and select restore from backup. It's that easy.

  • Is it possible to boot from a shared dvd or disk image remotely

    Is it possible to boot from a shared dvd or disk image remotely without using netboot for install or utility?

    All Apple Remote Desktop can do is point a system to a startup disk; it has no facility for providing a boot image. So you may want to ask this question in the Mac OS X or Mac OS X Server forums. You'll be more likely to get suggestions there, though other than NetBoot I know of no way to boot a group of computers from a single disk image or DVD.
    Regards.

  • Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24?Also, if I use a backup created AFTER updating to ios 6 when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the backup?

    Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24? Also, if I use a backup created AFTER updating to ios 6, when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the version of ios 6 that I created the backup on?

    There has never been a legit way to downgrade.
    It will always restore to the latest available software.

  • Hi....is it possible to print from iPad to a HP Officejet Pro 8500 A909 printer?  Thanks for any help!

       Hi....is it possible to print from iPad to a HP Officejet Pro 8500 A909 printer?  Thanks for any help!

    The HP Officejet Pro 8500 A909 is not an AirPrint printer, if that is what you're asking. HP has proprietary apps that may be suitable for your needs.
    To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options may exist but you're on your own finding them.
    You can also buy this standalone print server:
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html
    These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
    Otherwise you will need to buy an AirPrint printer or multifunction device.

  • Is it possible to print from iPhone 4 on a non wireless printer via use of the USB data / charging cable

    Is it possible to print from iPhone 4 on a non wireless printer via use of the USB data / charging cable.

    No

  • Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey

    Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

    A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
    Regards.

  • SSO-Logon from mobile device - create logon ticket from WebDynpro for Java

    Hi Experts,
    I'm developing WebDynpro-JAVA application for some warehouse stuff  (runs on a portal system, clients are mobile barcode-scanners with Windows mobile 5.0). JCOs from the portal system to the R/3-backend are confirgured for SSO with Logon-tickets and portal uses LDAP for authentication against a Windows-ADS.
    This works so far ... but my problem is the standard Logon-screen, which is nearly unusable on the mobile device (screen size, layout, etc.). Is there any solution to create logon-tickets directly from the WebDynpro application (using something from com.sap.engine.interfaces.security.auth or similar ?) or any chance to have a special logon screen for mobile devices (parameter sap-wd-client=Pie03Client is ignored for the logon screen).
    Thanks in advance.
    regards,
    Hendrik

    Hi Henrik,
    Did you find the solution to your problem ?
    I'm facing the same issue, so I'd be pleased to know the solution!
    Regards
    Stekam

  • WEB reports can it possible to access from out side domein

    Hi, i want  information whether WEB reports can be access from

    Hi all,
    WEB reports can it possible to access from out side domein. If yes please tell me how..

Maybe you are looking for

  • ScrollPane zoom in/out

    Hello, this is my first post. I'd like to add zoom in/out function to my ScrollPane, and make shortcut (CTRL+MOUSE SCROLL UP/DOWN) for it. ( like Inkscape ) I made the following code ( Canvas ) to achieve this, but have some problems. *1. How can I p

  • Alternative UoM issue

    Hi Gurus material A - Base UoM = LB component B - Base UoM = LB, Alt UoM = PC (conversion 1PC = 10 LB) I am trying to create a BOM (CS01) for material A: with components B. And I'm receiving this error: Unit of measure PC not supported for material B

  • Extract a picture from Pages 5.1

    How do I extract a picture from a Pages 5.1 document ?

  • Can't change pemissions.

    Hi, I created a role containing a KM Navigation iView to a key user to let him change the permissions of his repository by himself. He has full control access to his repository but when he clicks on the permissions button the screen that comes up sho

  • Escape key stopped working in Lion (wired keyboard)

    I upgraded my 27" iMac to Lion a few weeks ago, and over the last week or so I've noticed that the Escape key does not work. At all.  I am using a wired apple  aluminum keyboard with number pad. My problem appears to be system-wide, as none of the us