Ultiboard parts placement problem
In Ultiboard and desiging a new board layout. When selecting a part from the database and press OK it takes you back to the board layout to place that part but it would select the last part you place to move and place on the board and not the part you just selected. I have upgrade to 12 and this is the first time I have seen this. Has anybody seen this problem?
Reggie
The problem was when I was placing DIP parts (dip8, dip16 parts). I just made a new project and use the board Wizard to design the board. I could place the first part fine but when I would select a 2nd part from the database and press "ok" which takes me back to the board to place the part it would select the first part I place to move. The 2nd part would be placed on the board. I tried to replicate the problem today but could not but there is a new problem now. When I select a part from the database and place it and do a "ctrl-rotate I do not get the "Enter Reference Designation for part" box to show up! Also the curser cross hairs will not show up over the board outline but when you move off the board you can see the cursers. The only ways I can get it out of this is by doubling-right clicking on the board which brings up the PCB properties and X out of that to be able to select another part or do a “ctrl-W” command. If I do not do a rotate then it works fine. Looks like I will have to call tech support about this or has anybody else came across this. I did have this problem yesterday with the first problem.
Reggie
Similar Messages
-
Ultiboard part wizard doesn't show any copper layers during part creation
Ultiboard part wizard doesn't show any copper layers during part creation. I have to check the box to activate Copper Top in the part editor, once the part is made in order to see what I've made. I suspect there is a connection between this issue and my prior issue with the inability of the Multisim database to link to parts that I have recently made in Ultiboard. This all just began happening this week (of 8-27-12) Design Suite version is 10.1 & OS is Windows 7.
Thanks.Hi Todc,
This is very strange. My suggestion is that you can try to delete the configuration file. To delete the configuration file, go to Options >> Global Preferences. Under the Paths tab, select the path to the configuration file all the way upto config\ as shown in screen shot. Close Ultiboard and navigate to this folder. Delete all the files and then try to open Ultiboard again. This should resolve the issue.
Please let me know what happens.
Regards,
Tayyab R,
National Instruments.
Attachments:
v10 Global Preferences.JPG 77 KB -
HTML Help window placement problem
Hi -
We just upgraded to R7 from X5. It seems that now, for our
newly generated Help, the HTML Help viewer will not right-align.
Even if I specify the maximum width in the Window Properties
dialog, when generated, the window only extends about 4/5 of the
available screen width and is LEFT aligned.
Our screens are 1024 x 768 and RoboHelp seems to understand
this because if I max out the window size in the Window Properties
dialog, the height shown = 767 and width = 1019.
Is anyone else experiencing this placement problem?
TIAHi, Jack,
> ... the HTML Help window properties dialog only accepts
hard coordinates (i.e. pixels).
> ...
> Unless someone knows differently, for HTML Help,
apparently you can't get the HTML
> Help viewer to appear right-aligned for all
screen/display configurations
Yes, this is correct on both counts. Because of limitations
in Microsoft's design of HTML Help, you cannot specify the
dimensions of the help window in anything other than pixels, and
you can only set the initial position of the window relative to the
left and top edges of the screen.
On the other hand, if you are calling the help file
programmatically from an application, there may be some scope for
controlling the position of the help window by using standard
Windows functions. This article provides a small amount of extra
information:
http://helpware.net/FAR/far_faq.htm#control
Pete -
I can't print from my 27" late 2013 iMac. I am using an epson stylus 3800 pro. I updated driver and added printer in system preferences. When i print the printer queue opens and shows the job as "stopped". Supply level shows "information is not available which maybe part of problem...thank you
The first thing you could try is a reset of the printing system. Please note that this action will remove all printers and scanners from the Printers & Scanners preference pane.
With the reset complete, unplug the Epson USB cable from the Mac for a minute and then reconnect it. This action should result in the printer being added again to the Mac automatically. If this does happen, then see if you can print again.
If the printer is not added again automatically, open Printers & Scanners and click the plus button to add the Epson. Once this is done, then see if you can print again. -
Hello,
maybe someone could help me (apple telephone support could not):
Faces problem:
I made a smart-album to sort out all the "unnamed faces". But 92 pictures have a strange behaviour. They are tagged as "unnamed" although there is no rectangle in the picture to tag. I've allready used the repair-function and deleted all cache files (telephone support advised me to do both).
Places problem:
another strange thing is places. I've got a few pictures which have more than one "place" tagged. I don't know how this could happen. If you take a look at the screenshot you can see that I made a smart-album with 4 different places (PLACE - IS - XY - AND - PLACE - IS .....) to demonstrate that kind of behaviourI've noticed that photos I had faces from iPhoto 09 are not syncing (I only had a few).
In the manual list, the faces are not an option to select them. Tried removing and resyncing library and no avail. -
Suggestion for Multisim parts placement upon transfer to Ultiboard
Next update for Multisim, please make the default non-polar capacitor option (film, ceramic, mica) one which matches the outlines in Ultiboard. The default option seems to be a radial electrolytic -- not helpful if you are writing in a a bypass or timing cap. Last time I used a radial electrolytic was in the 1990's.
Here's why you have to fix this -- when you transfer to UB you've got a bunch of devices where the pads/holes are named with a "+" and "-" rather than "1" or "2". You can't automatically "Replace Part" with a non-electrolytic as you immediately have a DRC error! AND you get a design error with the "+" sign repeated on the device. This makes for a time consuming mess with the netlist editor.
By the way,how are you doing replacing the greek letter "mu" upon transfer to UB?Jackinnj,
I've replicated the swap behavior and I'll advise R&D of the potential issues and the feature suggestion to allow a SMT default (actually the default in v12 is no shape in the first use).
Also if you select a certain SMT shape from the Master parts list for RLCs, any subsequent use of that RLC part type should default to the same SMT footprint shape.
Regards,
Pat Noonan -
List View Web Part Search problem
We have a problem with the search in the
List View Web Part (SearchBox).
If you enter anything in SearchBox
and the beginning of the search, nothing happens.
This problem only occurs in non-admins.
In this case, the browser generates an error:
"inplview" not defined.I have the same problem. I think the problem is related to the Publish feature.
Any ideas? -
Places: problem with the State field in Aperture 3.03
hi,
I live in Europe and I have some problems in handling the State field in Aperture 3.03, because this field isn't always relevant in non North-American Countries.
The Google suggestions in Places don't always include the 4 fields (Location/City/State/Country). I have a lot of pictures taken in the Azores islands (Portugal) which don't show up in my Aperture map because the marker somehow doesn't write Azores in the State field.
Question #1: is there a way to eliminate the State field from Aperture, or at least to render it optional?
Question #2: if I manually create a New Location, what is the proper syntax to separate Location/City/State/Country in a way that will be understood by the Aperture database? I tried putting commas as a separator, but it doesn't seem to be working.
Thanks for your help.Yes, same here. I cannot complete my registration process due to the same error. My state is correct, which is RS (two letters only). I don't know what else to do. Refer to the image below. Thanks!
-
Toshiba Places problem connecting to facebook
TV Model 46TL963B connected to sky router using network cable. Have registered with Toshiba places. Trying to connect my facebook account using the email authentication option and it keeps saying problems with server and wont let me connect.
Solution pleaseThat doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter -
Decimal place problem in smartforms..
Hi All,
I my smart forms i am displaying a quantity filed, but itz displaying with 3 decimal places. But i need to hide the decimal places. I try to use formating option &symbol(.N)& but itz giving error while calling the smart forms.
Plz help me...
Regards,
Pavan.MHi,
I've yet to find any SAP documentation or training material the recommends using the table's own header as the Smartforms work area. I have however found it causing unusual problems in the generated function module.
That said, I've tried reproducing your problem and have not been able to. You could try defining a work area and seeing if that helps.
Regards,
Nick -
Simple image placement problem
I just recnetly upgraded to Dreamweaver 8 and have a crazy
problem that I don't understand. I'm unable to add picutres
side-by-side. I don't quite understand what is happenening but when
I try and add two images side by side it forces the other down
below it. It doesn't matter how much space is availble or the size
of the images. Right now I'm having to create tables to place them
into but I think that is a terrible solution and I never had this
issue with MX.
Any help would be greatly appreciated.
Jason<title>template1_2_02 copy.jpg</title>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<style type="text/css">td img {display:
block;}</style>
Reckon that could be a factor in not being able to place them
horizontally
adjacent?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jaysyn" <[email protected]> wrote in
message
news:e79eej$s07$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> It's hard to say without seeing your page. Can you show
us the code?
>
>
> Here is a webpage I threw on the net real quick.
> I create webpages by creating the template in Photoshop,
slicing it in
> fireworks and then finishing it in Dreamweaver. Using
the CS2 and Studio 8
> software.
>
> I noticed that if I just create a blank page in DW I can
set them
> side-by-side
> but not after I bring in a page from fireworks. Like I
said this process
> has
> never givene me this problem with v7 so any help would
be appreciated.
>
>
http://design.archerworks.com/images.htm
<< it isn't clean right now kind
> of
> just thrown out there for this example.
>
> Thanks,
> Jason
>
>
> -
Paste & Paste in Place problem
Hi there,
Recently i have these problem in the following description:
1- Create a new documet.
2- Draw a recangle frame on a page.
3- Copy the frame, and when i go to the other page on the same document the paste command is grayed.
Another problem:
1- Copy empty rectangle frame
2- Go to other page, when i paste the frame is filled with a content (fake content)
Also when i copy an item and try to paste it in place command it's not paste in same place.
I tried troube shooting
http://forums.adobe.com/thread/526990
but there's no solution
I tried Creative Suite Cleaner and reinstall and install indesign but all of these it's not solve the problem.
Indesign CS6 8.0.1
Windows 64bitAhem; yes…
Sometimes I should read more carefully.
In the meantime I could have a look at Shlomit's InDesign document.
I think, what he is seeing is not related to the OP's problem, but an issue in itself I can already observe in InDesign CS3.
Something "bad" will happen to the positioning of objects copied from master spreads by "Paste In Place", if the overall width of all pages left from spine is not equal to the overall width of pages right from spine. The pasted (in place) objects will move by half of the value the overall page widths will differ.
Either in positive x-direction, if the violation of symmetry (the wider side) is on the left side of the spine, or in negative x-direction, if the violation of symmetry is on the right side of the spine. It's not important, if the binding is LTR or RTL.
Still I have to test a bit, to see if that hypothesis is sustainable…
What is working alright:
Overriding or detaching objects from the applied master pages.
That will work without seeing a shift.
Uwe -
CS, CS2 & CS3 place problem
Hi,
I was just wondering if someone could help me with the following problem:
All l'm doing is placing a text file into a text frame - sounds easy - test code below:
======
set boxContent to "HDPropane:textfile.txt"
tell application "Adobe InDesign CS2"
activate
set MyDocument to active document
try
set myframe to (text frame 1 of MyDocument whose label is "testbox")
«event K2 plac» (boxContent) with «class rtfo» without «class imot» given «class insh»:myframe
on error emg
display dialog emg
end try
end tell
========
This works OK and will overwrite the contents each time... the problem is when you link the text frame to another text frame.... it still works fine if you run the script without having any contents in your text frames but as soon as you have some contents you get an error 'import failed' I get the same problem in CS, CS2 & CS3
I've even tried after the 'set myframe' adding set myframe contents to "" - adding this line was a little hit and miss sometimes it worked sometimes l got the same import failed message.
Regards, Gary.Change this:
set myframe to (text frame 1 of MyDocument whose label is "testbox")
«event K2 plac» (boxContent) with «class rtfo» without «class imot» given «class insh»:myframe
to something like this:
set myframe to (text frame 1 of MyDocument whose label is "testbox")
set contents of parent story of myFrame to ""
place file boxContent on myframe without showing options
Shane Stanley <[email protected]>
AppleScript Pro Sessions <http://scriptingmatters.com/aspro> -
MMS with SMIL part Display problems
Hi, A freind of me has just bought a new Nokia 6700 Classic
The problem is when he recieve an MMS with the SMIL presentation File, he has "can't display the SMIL part" !!!
Do you have any idea about this problem ?
TxsJust an FYI / update to this unresolved issue. I tried re-scanning the pictures and the new scans behave normally. I think what happened was that I rotated the pictures to make them upright when examining the 'event' as a whole; then somehow the program lost the rotation information (though I don't remember a crash I did have a couple during the long process); so when I tried to go from thumbnail to full size to edit that information was gone and somehow defaulted to 'blank'. That's my best guess, anyway as the issue was resolved by re-scanning.
-
I have been using Acrobat 9 Standard & the signature placement for some time without problems.
Recently, when I select the area to place my signature. The signature has been applied, but not in the area i have selected. It is larger than the area selected & I am also unable to move/resize the signature once it is applied.
This is causing me a problem as i generally have a set area on the pdf to sign & with the resizing of the area it is always outside of the required signing box/space.
I have tried to make the area I place the signature smaller than required. However, the signature is generated at the same size again.
Thanks in advance for any help on this problem.
AlexOh yes you can
I'll be right back
OK?
Ok,I' back! just read this thread there are two ways todo it
http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=11025
If you need further assistance please ask! If not:
Please resolve the post using the green kudos’ box.. Simply check the post that had ,
your answer in it. Thanks!
Message Edited by Bifocals on 09-06-2008 12:46 PM
Message Edited by Bifocals on 09-06-2008 12:46 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Maybe you are looking for
-
Need Suggestions for Student Computer Lab - Multiple Users on IWeb
I need some suggestions on how to best show students in the computer lab to save their Domain file to their thumbdrive. It seems some students are saving previous users Domain Files to their thumbdrives. There has to be an easy solution. Students are
-
CS5.5 Web Premium Trial
Hi, I have just upgraded my computer and I am looking for a link to download CS5.5 Web Premium Trial version, I have a serial key, I am asking because I have misplaced my CS5.5 disc. Thanks
-
Syncing photos in iTunes with Apple TV and iPod Classic
Hi: I recently purchased an Apple TV and every since I got it when I sync my iPod Classic and the Apple TV with iTunes, iTunes optimizes all my photos again (3000+ photos). In other words, every time I sync, iTunes optimizes my photos, deletes them a
-
Problem creation of accounting document impossible
Dear Gurus, I created a new Material Type in reference to "DIEN" Material Type. I have created a Sales Order -> Delivery -> Invoice flow (yes the delivery isn't useful but needed for some flat file sending...). After the creation of the Invoice, the
-
F-32, clear customer - document number
Hi, My client is using F-32 to clear customer items, it selects document no. as selction crieteria. it enters document number wrongly and press enters, system stores document no. user get back by pressing F3 once and select choose open items whr he a