Ultra 10 down for the count

I mistakenly switched off my Ultra 10 as it was starting the boot process. Now it won't boot, even respond to Stop-A, or anything else. Just a blank screen after the keyboard is acknowledged. No OpenBoot, anything.
Any ideas?
U10 w/ Solaris 10
Peter
It is now running after being without power most of the day.
Thanks.

Hello Peter,
<b>ultra 10 remote access</b>
did you obtain the USB-Serial adapter for your notebook or have another system with a serial port available?
I would suggest that you attach to the serial port of the Ultra 10 and review the output.
<i>Just a blank screen after the keyboard is acknowledged</i>
Maybe the system is running full-diagnostics. Check if the keyboard is properly attached.
If a serial console ist still not available, use the <b>Power-On Self Test (POST) / Keyboard LEDs</b> from the following document.
http://docs.sun.com/app/docs/doc/800-6358-11/6hne6kjq2?l=en& amp;a=view#z40001bb1511
Michael

Similar Messages

  • If my computer is not fully charged but i'm shutting it down for the night, is it better to leave it plugged in or to unplug it?

    If my computer is not fully charged but i'm shutting it down for the night, is it better to leave it plugged in or to unplug it?

    Your computer will not overcharge, even when off. If the battery is sufficiently low, it will top off the battery and stop charging. By morning, the light will be green because it is done charging.
    There is no need to disconnect the power when you shut it off. The SMC microcontroller will continue to supervise charging the battery, even when the main processor is shut down.
    https://www.apple.com/batteries/notebooks.html

  • Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the las

    Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
    I don't know if the bug exists in the program or the "Creative Cloud.
    Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?

    Entering the serial number is probably part of the registration process.
    Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted?

  • When trying to download an APP, it's requesting answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?

    When trying to download an APP, it's requesting setup for answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?

    Had to do a hard reboot on the iPad and we were able to get the questions to pop up. Now it's just slow downloading the apps.

  • Need to make automatic startup  and shut down for the instance

    hi to all
    i have os : Red Hat lunix as 3 , woth oracle DB 10g 10.0.1
    need to make an automatic startup and shut down for the instance when i start and shutdown the OS
    i tried Use dbstart and dbshut scripts then created file dbora at dbora as a script
    then i did
    # ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
    nothing worked
    if you will attach me any files
    my mail is :
    [email protected]
    thanks much
    Ahmed

    Hi,
    The /etc/oratab should have an entry for this database with 'Y' in the last field as:
    Oracle_sid: Oracle_Home:Y, so when dbstart command issued it will check the oratab and starts the database.
    I advise you to keep the dbstart and dbshut in different scripts and save them directly in the runlevel directories, instead of creating links.
    thanks
    srinivas.

  • How can I enable the automated drop down for the subject line on the email page

    How can I enable the automated drop down for the subject line on the email page as I send more than 300 emails everyday with the same subject line. Before it use to happen in my gmail account but now its not. Please help me as its increasing my work time because I have to type the subject line again and again on each email I send. Please help me guys.

    This is usually caused by one or more bookmarks having a long title.
    You can check that folder in the Library and shorten long names.
    * Bookmarks > Show Al Bookmarks
    *Bug 626066 - History, Bookmarks menus too wide because of pages with long titles on 64bits
    <i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

  • Internal clock for the counter

    Hello everyone,
    I am new to NIDAQmx and I am doing angular position measurement. I found provided sample for the counter, 
    it says that I need to use external sample clock. Could someone provide me sample, that uses external clock that was generated by one task
    and another task which uses that generated clock and reads encoder input! I am doing it in C++.
    Thank you!!!

    Hello Khassan,
    Here is a link to a Developer Zone article that describes how to implement two tasks that share a clock, The example covers how to implement this with Analog input and output. You can work with it to fit it to your application: http://zone.ni.com/devzone/cda/epd/p/id/2352
    Reagards,
    -Travis E
    National Instruments
    Applications Engineer

  • Whats the sweet spot for the count of Photos per Library?

    1) How many photos should be there in a Library at max. to have iPhoto perform efficiently?
    2) Does the iPhoto Library database performance depend on the size of the photo or the count of photo?
    I have a collection of some 7000+ photos of 2.5MB on average.
    Should i put all of them in a library or different library?
    Also if i have to set up different library i want to have backup of them in a DVD for each library. So, technically my library should not exceed 4.5GB
    Now my confusion is:
    If i have say 3GB of original photos in the library then technically i'll have around 3-6GB of photos in both Original and Modified folders.
    Going through the forum I have found that there are 2 ways of backing up photos:
    1) Through "Export" to a Folder and writing the folder the a media.
    2) By Copying the Library Folder completely to backup media.
    If my assumption is right then,
    1) in case of "Export" method, i'll be having a collection of the total number of photos i have. i.e. if i have 3000 photos then the exported folder will contain 3000 photos.
    2) in case of "Copying" then i'll be copying the OriginalModified+Datadatabase, and i could restore them as a library when needed.
    Please let me know if my assumption is right or wrong.
    Thanks,
    Sapam
    Message was edited by: sapam

    sapam
    1) How many photos should be there in a Library at max. to have iPhoto perform efficiently?
    iPhoto is rated to 250,000 pics. After that there is no right answer based on iPhoto. What you need to take into account after that is Hardware. The max for an efficiently perfoming iPhoto will be very different for a Mini with 512MB of RAM and a MacPro with 8 Gigs of RAM. Other factors include the size of the disk and the amount of free space on it.
    2) Does the iPhoto Library database performance depend on the size of the photo or the count of photo?
    The count of the photos - and then some. The files are stored in the Finder. So a 1 MB file takes the same amount of space in the iPhoto database as a 10MB file. However, what does impact on the size of the library file are things like the number of albums, books, slideshows etc., Smart albums, in particular, can slow down the app launching. So, it's not just the number of photos but the organisation as well.
    So, what's your Hardware and what do you mean by efficiently? I have a 15k image library that's some 40gigs in size on my iMac with 2 gigs of RAM. I'm very happy with it's performance.
    Going through the forum I have found that there are 2 ways of backing up photos:
    1) Through "Export" to a Folder and writing the folder the a media.
    2) By Copying the Library Folder completely to backup media.
    Close.
    Think of it this way:
    Want to save the current versions of your pics only? Select the pics in the iPhoto Window and go File -> Export. Export them to a folder on the desktop. Burn that with the finder. Now you have the up-to-date versions of your pics. pop that disk in any computer and there they are.
    Want to save your Library - that is Originals, Modifieds, database files etc?
    1. Copy the iPhoto Library Folder to an external HD or burn it to DVD
    or
    2. Use the Share -> Burn command. This will burn a disc that will mount into another iPhoto, and pics can be dragged to the new iPhoto from it. You can burn your entire library, or break it into albums and burn in groups of albums if your DVD isn't big enough.
    Regards
    TD
    Message was edited by: Terence Devlin

  • Can DAQmxRegisterEveryNSamplesEvent function be used for the Counter Input Channels

    Hi, All,
    I have an application to count the digitial pulse number. I want to know the time of the coming pulses which start from 1 and increased 4 later, like 1, 5, 9, 13..... The time interval between each pulse is not a fixed value. So I tried to use  DAQmxRegisterEveryNSamplesEvent and DAQmxCreateCICountEdgesChan functions. But afterI called the DAQmxStartTask function, it always failed.  The board I used is the NI-PCIe-6320. Here is part of my code.
    DAQmxErrChk (DAQmxCreateTask("",&m_taskhandle));
    DAQmxErrChk (DAQmxCreateCICountEdgesChan(m_taskhandle,"Dev1/ctr0","",DAQmx_Val_Rising, 0, DAQmx_Val_CountUp));
    DAQmxErrChk(DAQmxRegisterEveryNSamplesEvent(m_taskhandle, DAQmx_Val_Acquired_Into_Buffer, 4, 0, EveryNSamplesCallback, this) );
    DAQmxErrChk (DAQmxStartTask(m_taskhandle));
    I don't know the reason. Can Anyone give me some help. Thanks.
    Yang
    Solved!
    Go to Solution.

    Hi, John,
    What's I what to do is that I have an external digital signal, when the signal goes from low to high, I need do some operations. So I just want to know the time when the digital signal goes from low to high.  The frequency of the digital signal is from 0 - 20000Hz. My first plan is to use a counter to count the pulse rising edges. When the number of edge increases one, I do the designed operations. In this method, I can't guarantee I can catch each pulse rising point. Because sometimes the counter will increase more than one in the on-demand mode. For example, the previous content of the counter is xxxx4, but the next reading the content may become xxxx6.
    After I learned some ANSI C  codes, I found that the ChangeDetectionEvent can help me found time when the signal goes from low to high. So I wrote the following code: (I set the digital signal to P0.0)
    DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
    DAQmxErrChk (DAQmxCreateDIChan(taskHandle,"Dev1/port0/line0","",DAQmx_Val_ChanPerLine));
    DAQmxErrChk (DAQmxCfgChangeDetectionTiming(taskHandle,"Dev1/port0/line0","",DAQmx_Val_ContSamps, 1));
    DAQmxErrChk (DAQmxRegisterSignalEvent (taskHandle, DAQmx_Val_ChangeDetectionEvent, 0, Callback , dialog));
    DAQmxErrChk (DAQmxStartTask(taskHandle));
    int32 CVICALLBACK Callback (TaskHandle taskHandle, int32 signalID, void *callbackData){
    CNIPCIE6320Dlg* dialog = static_cast<CNIPCIE6320Dlg*>(callbackData);
    dialog->m_event_num++;  // Here is to calculate how many events has been triggered
    return 0;
    Yesterday I used this method to get the pulse rising time. I found the m_event_num is close to the ground truth (In the simulation, I know how may rising pulse I generated).  In one two hours test, the offset is almost 400 pulses. But today I did the same tests again. I found the m_event_num got a big difference from the ground truth. The voltage of the whole system today maybe smaller than yesterday, because today the power is from an invertor while yesterday the power is from the electricity supply. So will the lower voltage supply will causing some event missing. Or if PC system became busy will ignore some callings of the event callback function? That's two possible reason will affact the final result. I am not sure. Do you have any experience about this problem.  Or do you have some better suggestion to get the pulse rising time. Thanks again.
    Regards,
    Yang 

  • Power down for the day

    Hi, when I'm done with my laptop for the day, should I just close it or should I be shutting it down with the power button?

    Hi A,
    Either way is fine. There is no "correct" way. I used to just let mine sleep all the time, for years. Now I shut it down for security reasons.

  • Metalink3!!! has been been down for the last 2 days

    is it just me or are others also facing issues while accessing Metalink3...
    I haven't been able to view the login screen for the last 2 days....

    Not only you...
    Is MetaLink3 down?
    Nicolas.

  • Drop down/drill down for the report

    HI I have a requirement to have a kind of drop down menu on the heading level. So that if the data is say sales by model, on the invoice_date column, the user would have the option to look at this weeks' invoices, this months, etc.
    I know there are Parameters up front to do this but they want this kind of drill down style.
    Is there a way to do this in CR or via one of the add on products?

    Hi
    Apply record selection formula.
    Create a formula field to display specific name for month, week etc.
    Apply a group on this formula field.
    Regards
    Sourashree

  • ITunes Store is DOWN for the last four hours

    WTH is going on? It is down. Completely. I googled this and I see it's happening in numerous parts of the USA.
    It's been down since this morning (Thursday the 8th). Nothing is wrong with my internet. Anything else I need or want to do is fine. ONLY the iTunes Store is not respondong.

    Hi Matt!
    It sounds like you may be having an issue with your connection to the iTunes Store. We have an article that can help you troubleshoot this issue, and it can be found here:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    You can also check the status of numerous Apple services through this website to determine if there is a known outage or not:
    Apple - Support - System Status
    http://www.apple.com/support/systemstatus/
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Help! I will break down for the question...

    Hi:
    When I start the OAS Manager and the websit40,the error message occurs as follows:
    Please wait while the command is being processed on host XYZ ...
    Starting ORB processes...
    Returning filename e:\AppSrv\orb\admin\.event
    waiting for ORB to be ready...
    ORB is not responding. Please restart manually...
    OWS-20214: The OAS processes can not be started, because the CORBA orb processes can not be started.
    What's more the OracleOASStart40, admin and www listener can not start!!!
    What is the problem and what shall I do? Please help me. The configure is as follows:
    Winnt4.0 + Service Pack
    Oracle8.1.5.0
    Express Server6.2
    Oracle Application Server 4.0
    I will break down nearly. Please give me some advance.
    Waiting for your reply and thanks in advance!
    null

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • I think video/audio chat is down for the whole world right now

    Thurs April 17th
    I video chat with people across america and even across the globe ALL THE TIME.
    today, though I can text chat with iChat, iChat will not allow a single video or audio chat with anyone.
    I have tried from different computers and different internet locations.
    I wonder if the AIM network is just having a big problem today....does that sound right to anyone?
    maybe better luck tomorrow, because this usually works ALL THE TIME and not a single setting has changed for me
    thank you

    Ralph,
    I concur that the AV/screen sharing side of iChat AV is essentially broken (21:06 GMT). I have two different people I talk to regularly and neither are working today. The two parties also cannot talk to each other, which worked regularly before.
    Using the "errorLogLevel 7" CLI switch, I see this which I believe is unusual (but I can't be positive it's the problem):
    154810.494894 BWD_GetBandwidth: SendRequest (from :16397)
    154810.745610 BWD_GetBandwidth: SendRequest (from :16397)
    154810.995934 BWD_GetBandwidth: SendRequest (from :16397)
    154811.246246 BWD_GetBandwidth: SendRequest (from :16397)
    154811.496856 BWD_GetBandwidth: SendRequest (from :16397)
    154811.747104 BWD_GetBandwidth: SendRequest (from :16397)
    154811.997659 BWD_GetBandwidth: SendRequest (from :16397)
    154812.247966 BWD_GetBandwidth: GotResponse
    154812.248029 BWD_Get: signal failed
    154812.248098 BWD GetBW failed.
    154812.248116 Using old cached values.
    154812.248294 GotBandwidth: 496971/6572982 (up/down) @@C??
    This log is repeatable for two different Macs on two different cable ISPs separated by thousands of miles.
    FWIW, the test accounts (appleu3test0x) do work, but my perception is that the test accounts are computers with full public IP addresses and minimal (or possibly no) firewalls. A perfect test setup like that probably sidesteps the issues that are occurring.
    - Patrick
    Message was edited by: Patrick Fergus

Maybe you are looking for