Ultra 2 boot up error

Hi
We are having a Sun Ultra 2 workstation loaded with Sun os 10 06/06.
We keep getting this error message :
the file just loaded does not seem to be executable.
Previously, we reload the os to resolve this error,
but it is time comsuming.
Does anyone know of a better and faster to resolve this error.
Thanks and regards
Jimmy

try stop + A at the opening screen and then reset-all... the previous install may have had some network attachments (?) looking for another source for the boot files...
that is my only guess....
haroldkarl

Similar Messages

R61 R&R won't start after "unmountable boot volume" error

Hello all,
New user, first post - after problem, of course.
I have an R61 Thinkpad with Windows XP on it. (SP2 or SP3, not sure). Has worked flawlessly for years, then the other day I got the dreaded "unmountable boot volume" error and it would not start.
No problem - I re-start, hit the ThinkVantage button, then hit F11 to use the R&R hidden on a separate partition of the hard drive........I get the black screen with the big progress bar, ok, then a blue screen......then nothing. Hangs up and sits there. I have repeated this about 5 times now.
No problem! - I was smart enough to make an R&R CD set a while ago! Put the primary R&R disk in the CD drive, start the machine, ThinkPad button, F12 this time to choose boot from CD.....much CD activity ensues and I once again get the black screen with the big progress bar. It takes much longer, and I get teh blue screen - BUT - then it goes one extra step to display the "ThinkVantage Rescue & Recovery 4" screen with the life preserver image.
Excellent, I thing - except it then hangs there. Just sits there. No disk activity. No keys will do anything.
I can find no threads here or on any other forum with this particular issue.
Am I fubar? Or is there something else I can do?
Thanks a bunch.
Solved!
Go to Solution.

Hi jim, welcome to the forums,
Is the hard drive recognised in BIOS, was there an entry in the boot list against HDD0?
Regardless of it being shown in BIOS / boot list or not, the first thing I would do is to reseat the hard drive and see if that helps, maybe over time it's lost contact to the mainboard socket. If you don't know how to do this you can find out at the R61 movies site.
The next thing I would do is run a hard drive diagnosis check from a bootable cd, these can be downloaded from all HDD manufacturer's websites e.g. Hitachi's Drive Fitness Test. It may be that the drive has simply gone bad after all those years of work.
Let us know how you get on
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Unmountable Boot Volume error in Z61T

Hi Members,
I just encountered the the Error Unmountable Boot volume error(Blue Screen) in my Z61T Think pad laptop.
I'm not sure what caused this error. Is it possible to fix the error?
I tried to go in to Recovery Console using XP CD and then repair the OS, but unfortunately when i go to repair mode i get another error which says unable to recognize the hard drive. Im really confused as of what is the exact problem with my laptop and also im worried about that data.
appreciate if anyone can throw some light in to the issue and help me out in fixing the same.
Thanks
Rajesh

If you believe that your hard disk/file system may be corrupted, try using any bootable diagnostic cd.They are operating system independent and will let you know if your HDD is getting corrupted.
Try the data life guard diagnostics(bootable).
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Hp mini 110 boot disk error after installing new hard drive and system recovery

Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy...

No Bootable Device - Insert Boot Disk Error...

Ok so today I installed Windows 7 Ultimate 64-Bit on my 750GB Toshiba HDD in my Optibay and was installed successfully, installed all the Drivers from Windows Support flash drive and when I try to reboot into Windows 7 I get the "No Bootable Device - Insert Boot Disk Error" everytime!! lol What the heck is going on here??
Specs:

lennarts wrote:
So, I encountered the same problem...
When I click the icon in bootcamp to install windows, after a bit of activity the Windows installation disc was spit put, the screen goes black and the error "No Bootable Device Insert Book Disk Press Any Key to Continue" appears on the screen. And nothing else but using the OSX installation disc helps.
I realised that the windows installation disc did not even spin up.
So what I did... I went back to OSX, reinserted windows installation disc, went to system preferences, selected the windows cd as a start up disc and locked it against the changes.
After that I went back to bootcamp and clicked gain to install windows. Everything worked fine now.
I just tried this and it didn't work for me. I keep getting a black screen with a cursor flashing in the upper left hand corner.

Boot camp error loading operating system

when i hit restart and held down option, i clicked on windows but it loaded a black screen saying error loading operating system. I am running Os X 10.9.4. Does anyone know why boot camps is not working?

Loner T, not sure if you saw this, but I created a new post with the information you were looking for. Any help you could provide would be great...thanks.
Re: Boot camp - error loading operating system

All Windows I Install return boot\bcd error

Have a l645d-s4040.
Im Lost now.. I've read many threads similar to my problem, or exactly like my problem. Ive tried it all, and done at least 12 Different installs. heres the info:
Bought it brand new, was unaware of making the restoration disks until it was too late.
I had a virus, so I did "clean all" in diskpart, at the cmd prompt. So i can start fresh. I have a retail version of Windows 7 Home Premium 64 bit, which was the original OS. went through the installation process fine, until the reboot where its supposed to go through the second step of the installation. on reboot i get a "bcd\boot" error. Ive tried repairing the MBR, the Boot record, ive tried using align=1024, ive tried using paragon, and acronis to fix the boot record. Ive tried using boot managers. Ive tried installing windows vista, ive tried windows 7 ultimate 64 and 32 bit versions.. the only OS i can get to install is XP.. Im at a loss
of course of done : Startup Repair (http://www.sevenforums.com/tutorials/681-startup-repair.html)
So after the first step of of installation, which goes fine then reboots to continue the installation i get:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click “Next.”
3. Click “Repair your computer.”
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configurations data.
Enter= Continue ESC=Exit
so i reboot with the install cd. which i downloaded from www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct- download-links-ultimate-professional-and-home-premium/.
And ran the startup repair, first time no OS found and failed to save startup options. rebooted and this time the repair worked and it booted fine running the 2nd step of the installation process.. on the reboot i got same boot\bcd error.. so i repeated the repair steps above.. it finally booted and finalized the installation.. i got to the desktop fine and installed all my drivers. when i rebooted i got the same error.
WHATS UP WITH THIS???

Satellite L645D-S4040
I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media, which you can obtain from Toshiba.
Order Toshiba Recovery Media
-Jerry

Pavillion Boot Disk Error

My son's Pavilion g6 has two users, his and mine. When I log in as mine, the computer seems to work fine, in and out of Safe Mode. When I log in as his user, I get the blue screen data dump, then a boot disk error. Here is what I have tried:
Restore on my user
Windows security scan (which didn't finish before shutting down)
Booting with Safe Mode on his user (didn't work)
Took out the hard disk, sprayed with compressed air and reinserted the hard drive
What options do I have? Can I delete his user? Could it be a virus? I am stumped.
I can get to all of his files but I can't stay logged on with his user.
Thanks.

Yes you can delete his user account and create a new one. Just be sure to copy his files if he has stuff he doesn't want to lose. Restart the machine before trying o create a new user account for him.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

KT4 ULTRA + FSB133 = CRC ERROR !!!!!

KT4 ULTRA + FSB133 = CRC ERROR !!!!!
WHY ???
KT4 ULTRA, Athlon 1800XP,256Mb333 Kingstone, GF2,WD 80Gb, IBM 40GB, CDRW, DVD, Live,
PSU: 300W Codegen
+3.3V - 20 A
+5V - 30 A
MAX 165 W
+12V - 13 A
-5V - 0.5 A
-12V - 0.8 A
Max 9.6W

put codegen in search engine herelink
all problems related to not enough juice
also read this onelink

Ultra DMA CRC Error Count

I have a SATA 6 drive which is being downgraded from Ultra DMA by Windows 7. It used to handle about 130MB/s, now it's being limited to 25MB/s. This is apparently due to the Ultra DMA CRC Error Count going to 9 from a bad connection. I've
replaced the connection, but cannot find any way to make Windows 7 retry the drive at the higher data rate.
With Windows XP there was a registry key (ResetErrorCountersOnSuccess) that you could add to make it re-detect, but this doesn't appear to work with Windows 7. In fact all the solutions I can find online only seem to work with XP. Is there some
way to fix this without re-initializing the drive? I really don't relish the idea of transferring 4TB of data at 25MB/s (40+ hours!) just to reset the drive.

Hi,
Have you tried to manually turn DMA on through device manager?
Please take a try with the follwoing steps:
Open Device Manager by clicking the Start button , clicking
Control Panel, clicking System and Security, and then, under
System, clicking Device Manager.‌ If you're prompted for
an administrator password or confirmation, type the password or provide confirmation.
Double-click IDE ATA/ATAPI controllers.
Under IDE ATA/ATAPI controllers, for each item that has the word
Channel as part of its label, right-click the item, and then click
Properties.
Click the Advanced Settings tab. Under Device Properties, select or clear the
Enable DMA check box, and then click OK.
More information, please see:
Turn Direct Memory Access (DMA) on or off
Best regards
Michael Shao
TechNet Community Support

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

MSI 745 Ultra boot probs.

I am having problems with my new MSI 745 Ultra. It finishes post, but fails to load Win XP. It gives me 5 options: boot into safe mode, safe mode with network connections, safe mode with command prompt, last know good config, continue loading windows. Whichever option i choose, it restarts before it has finished loading windows. With the last 2options, it restarts just as it starts to display the XP scan disk screen.
I have even updated the bios, but it still has the same outcome. I am at a loss here, could somebody please help, otherwise it looks like this board is goin back and i'm guna have to look for another.
A bit about my hardware:
AMD Athlon Tbird 1Ghz
MSI 745 Ultra
256Mb Pc2700 Ram by Crucial
Geforce 2MX 32Mb AGP 4x
Samsung 30Gb Hdisk
LG CD-Rw & DVD Drives
Somebody please help.
Edit: Sorry for the multi-posts, my comp didnt display the post page, and i had to refresh the page.

Hi, me again.
I reinstalled XP, then booted with the new mb in, and it gave me an error screen saying that Quote
A problem had been detected and Windows had been shut down to prevent damage.
It then said i should:
Check for viruses
Remove any new hard-disks and hard-disk controllers
Run CHKDSK /F to check for hdisk corruption.
Under technical information, it displayed the following codes:
Quote
***Stop: 0x0000007B (0xF9E4D640, 0x00000034, 0x00000000, 0x00000000)
I have ran Scan disk, and had no success, and i am in the process of running a Virus scan.
Does anybody have any ideas as what to do here?

Neo4 Platinum Boot CD ERROR HELP

First post!
I have had my MSI (7125) for over a year and I can't get most boot CD's to work properly. I can get them to boot but not load whatever it is I choose in there given options. Example: I can't get anything to load in Hiren's BootCD ver. 7/8. Say if I choose the Mini Win98, it just sends back errors, invalid drive letter.
I think i know the problem but can't figure out a solution. The mobo can't create a RAM drive and read from it. Maybe some kind of lock on it? I have looked around on many forums, and in some of the sticky's on here.
The weird thing is that I bought another one of these boards, a few days ago and it does the same exact thing.
I can load default BIOS settings, I tried the Boot OS/2 option in the BIOS. Some Linux distros do work. I need old school boot disks. The CD works perfect on my HP ZD8215US Laptop (Intel P4 2.8)
Specs:
MSI (7125) Neo4 Platinum
BIOS: 1B0 (on both mobos) came stock on the new one
AMD64 3200+ Venice
2 Gigs of RAM (4x 512MB's) 2 different sets
420 or 480 PSU can't remember which
Maxtor DiamondMax 10 300 Gig S-ATA
Creative X-FI Platinum
Logitech LX700 Cordless keyboard only USB plugged in (for both keyboard/mouse)
NO USB devices plugged in besides keyboard/mouse
...I have a LOT more hardware but its just the HD, floppy & two DVD burners that I have connected for the new mobo so far.
I haven't tried Murdok's 1C7 BIOS yet. I even tried disabling all of my IDE/SATA controllers and still no go.
I mean...I have stripped it down with less components connected. Could only be the mobo/ram/dvd

Thanks for the reply.
I disabled almost every setting in the BIOS, especially everything in the Integrated screen except only for the ATA controller I was using. I tried a different ATA cable (both round). I took out the other 3 sticks of memory so just 1x 512 MB DDR. I took the DVD burner out and stuck it in my g/f's computer, Gigabyte nForce 2 AlthonXP 3200+ and it works perfect booting into the BootCD with the same options selected.
But looking at the errors, it just looks like it can't read the ram drive.
I'm getting an adapter for my IDE HDD's that converts them into S-ATA tomorrow, so i'll took one of the adapters up to the DVD burners and see if that sheds any light on this problem.
With this board I only have 2 ATA connectors, tried both.
Maybe its an 64-bit issue. I tried the UBCD 3.4 and that one worked on a few things.
Maybe I can play around with the ramdisk creator program and see if there isn't some settings then figure out the problem with the Hiren guy. I haven't heard either way if this BootCD will work with Nforce 4 Ultra and the MSI 7125 Neo4 Platinum.

Unmountable Boot Volume error message appears

Hi.
On monday I bought Norton Internet Security 2007 and tried to install it. I was reading a word document while I was installing it. I received an error message and was asked to restart Windows XP.
When I tried to restart Windows XP. I received a message telling me there was an error that caused Windows to shut down. The message ask me to choose between:
1.safe mode
2.safe mode with command prompt
3.last know good configuration
4.start windows normally.
I choose "start windows normally"
MS Windows XP started normally for a few seconds then instead of my normally log on page I received a blue screen with this message:
"A problem has been detected and windows has been shut down to prevent damage to your computer.
UNMOUNTABLE_BOOT_VOLUME
if this is the first time you have seen this error screen, restart your computer. If this screen appears again follow these steps.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching and shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select start up options, and then select safe mode.
Technical information:
STOP: 0x00000ED (0x80E(1E30, 0xC000031, 0X000000000) "
And the then my computer shut down and then restart in the same sequence.
IT keep repeating the sequence: error message safe mode ect ect then blue screen, shut down and restart. Again and mo matter which mode I choose. I went on online(from a borrowed computer) to research what is going on with my notebook and I still have the problem. They told me I must uninstall the software that caused the problem. My question is have can I uninstall the software when I can't reach Window's log on and hence the control panel?
I'm at my wits end. Please help.

Hi
I dont know why but it seems that your master boot sector is damage
You could try to access the repair console (boot from original windows CD and then press R)
Then try to use this command: chkdsk /p
This command should repair some sectors on the HDD. Maybe it helps.
If not then you should format the whole HDD and reinstall the OS again!

P55gd80 no longer boots FF error

Hey guys I just built my first computer. However, I had a bad stick of RAM which caused lots of BSOD errors so I RMAed them. It ran fine with one stick of RAM however, I had to RMA both sticks cuz OCZ wanted both sticks back. Now a month later, I reinserted the new set of RAM and the motherboard refuses to post. Giving me FF on the lcd and 8 on the CPU.
Steps tried:
1. Reset the CMOS with power cord out.
2. Reset the CPU
3. Tried booting with one stick of ram in the first black slot.
4. Tried booting on non conductive surface.
I don't know whats wrong. You guys think the motherboard just died in the weeks in between? The sticks of ram are good it boots up in a friends computer with no errors.
AZZA CSAZ-910R ATX Helios 910R SECC Mid Tower Case Black Retail
AZZA PSAZ-850B14 Dynamo 850 850W SLI/CrossFire Power Supply Retail
HITACHI Deskstar P7K500 0A35415 500GB SATA 3.0Gb/s 7200 RPM 16MB Buffer Hard Drive Bulk
INTEL BX80605I5750 I5 2.66 GHz Socket 1156 1MB Desktop Processor Retail
MSI P55-GD80 Intel P55 Core i5/i7 Socket 1156 PC3-17000 (DDR3-2133) ATX Motherboard Retail
OCZ OCZ3G1333LV4GK 4GB (2 x 2GB) PC3-10666 (DDR3-1333) CL9 Dual Channel Memory Retail
SAMSUNG SH-S223B 22X SATA DVD Burner Black Drive Bulk

Quote
2. Reset the CPU
You may want to pull the CPU one more time & check with a magnifier for any possible slightly bent socket pins/wires.

Ultra 2 boot up error

Similar Messages

Maybe you are looking for