Ultra 24 that will not perform POST

I have an Ultra 24 that will not perform POST. I think the BIOS is corrupted or the motherboard went bad. All I get is the white Sun logo splash screen at poweron. The fan is running full speed too.
Any ideas?

So I took the iMac to the Apple store for service. They confirmed my greatest fear... Bad logic board. The cost to replace this component was in the ball park of $700. The techs at the Apple store provided daily communication as to the progress of their diagnosis. In the end, I asked them to not do the repair and just button up the machine. To my amazement, when I went to pick up the iMac they did not charge me a dime. I then went and ordered a new 27" iMac online.

Similar Messages

I have songs in my iTunes App that will not play. It keeps saying that this computer is not authorized to play would you like to authorize it. I would but its asking me to authorize an account that was changed. What do I do????

I have songs in my iTunes Application that will not play. I keeps saying that this computer is not authourized to play name of song would you like to authourize it. The problem is its the old account I had and that has been changed. How am I going to authorize these songs when this account no longer exists.

I posted about this yesterday -- it happened to me, and the solution was incredibly simple. An Apple tech guy had me delete my SC Info Folder, located on my XP in Application Data.
Here is my post:
https://discussions.apple.com/message/15134112#15134112
Here is the link about the SC Info Folder (4th down):
http://support.apple.com/kb/TS1389?viewlocale=en_US
It wasn't every song, just a few of them. A nightmare to figure out what to do, but it was solved upon reboot.

HT2404 how do you get your money back for software that does not perform as advertised?

how do you get your money back for software that does not perform as advertised? I purchased the batch coverter to watch .swf video which it states it supports, but it will not open the files and I want my money back!!!!!

tell Apple. http://www.apple.com/feedback/
iTunes Store Terms and Conditions specifically states: All sales and rentals of products are final.

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

How to fix a Domain file that will not open

We have a Domain file on our Mac Mini that will not open - iWeb keeps saying that it cannot be found, even though it is in the Library/Application Support/iWeb folder. I transferred the Domain file to my GS, and I get the same response - if I switch back to the original Domain file (on the G5), all is well. Obviously, the Domain file from the Mac Mini has gotten corrupted, but cannot determine the exact problem (though I think it may be the index.xml.gz file). I've reinstalled iWeb, checked permissions, deleted (and re-created) the associated plist files - nothing. Unfortunately, our company's web pages are in that Domain file, and cannot perform some much-needed updates. Any help that can be offered would be most appreciated!!

Have you tried double-clicking on the Domain file?

Toshiba L755 is the only one that will not PXE BOOT

I have a few host on my network which it has VMWare 10 installed, successively performed deployment into those machines(Hosts and created VM"s). Now, I do have also a Toshiba L755-S5258 that will not complete the process, it does not give any
errors. The following is the messages it gives.
Client MAC ADDR: xx xx xx xx xx xx GUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXX
Client IP:XXX.XXX.X.XX MASK: XXX.XXX.XXX.x DHCP IP: XXX.XXX.X.X
Gateway IP: XXX.XXX.X.X
Downloaded WDSNBP...
Press F12 for network service boot
Windows Deployment services: PXE boot Aborted.
PXE-MOF: Exiting Intel PXE ROM
This si the only unit that does not follow through with the deployment
Note that I've deleted other machines that I successively deployed to from the Known Computers on Active Directory User and Computers, with not good results
Please any one help me decipher this headache

Hi,
Are your using the WDS for the Windows deploy? A network boot program (NBP) is the first file that is downloaded and executed as part of the network boot process and it controls
the beginning of the boot experience (for example, whether or not the user must press F12 to initiate a network boot). NBPs are specific to both the architecture and firmware of the client. You must accounting the screen press F12 to allow the system boot
from the WDS. The VMware® workstation PXE booting issue please ask your software vendor.
The related KB:
Managing Network Boot Programs
http://technet.microsoft.com/en-us/library/cc732351(WS.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Order types entered in a Ztable, system will not perform material listing.

Hi Guys,
I have a requirement where user will enter the list of order types to be excluded from material listing through a custom table.
For all those order types entered in the custom table the system will not perform any material listing check, regardless if the material is existing in the material listing.
Can you please tell me how to do this through coding???Any particular exit or where can i code this.???
Many Thanks in Advance,
Rajendra
Moderator message : Requirements dumping not allowed, show the work you have already done. Thread locked.
Edited by: Vinod Kumar on Jan 13, 2012 4:08 PM

Swagat,
Thank you for your response, what I am still not getting is - even in manual transfers via LT10 shouldn't the system restrict the movements to certain storage types? If you think from the shopfloor perspective the WM material movements are done at WM level only - meaning moving materials from one storage type to another and LT10 is widely used as it is one step tcode.
I know we can restrict movements when storage class is assigned in search strategy, but this applies only to hazardous materials. The material in question is not hazardous so I am still thinking if there is any way to restrict material movements.
Do you have any documentation link which mentions search strategies are not taken into consideration during manual transfer? If yes please send that would be helpful.
Once again thanks for your time.

I often get emails with attachments that will not open with my mac. Is there any free software to help this

I often get emails with attachments that will not open with my mac often a small ? will show. How do I open these

What kind of attachment? Post an example file name.

I have one iPad that will connect to our wifi but I have another one that will not, why is that

I have an iPad that will not connect to the wifi at our house. My sister also has an iPad and it connects automatically. Mine is the only one that will not. I can't figure how to get it to work. I have taken my iPad other places with wifi and it connects right away. I know that some wifi systems have a limit on how many things can connect to them but I have even gone so far as turn off the wifi on every device that we have that connects to the wifi and it still doesn't work. I don't know what to do or how to get it to work?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS2776 I used my Ipod while at the gym one day and now it's acting wacky. I have tunes that will not download due to an "unexpected error (-50). Anyone know what this is and how to fix it?

I used my Ipod while at the gym one day and now it's acting wacky. I have tunes that will not download due to an "unexpected error (-50). Anyone know what this is and how to fix it?

looks like the gtk theme is not the problem. didnt really think it was, but the documentation was worth posting. the guys over at ubuntu look as though they have dealt with this in great detail, and have produced a few solutions, which may or may not work. i have decided to post these for anyone else who may have these problems.
Solution 1 - new user creation:
https://bugs.launchpad.net/ubuntu/+bug/104521
Solution 2 - config file delete:
http://ge.ubuntuforums.com/showthread.php?t=724439
post number 6 here features the config file delete solution, as well as a link to another post which may be useful.
judging by a google search on this problem and the number of responses that came up, the bonobo/daemon error is quite a common curse for the users of gnome, although much more common in distros such as ubuntu or fedora.
i hope that this proves useful and if anyone has anything to add, please feel free. the more documentation the better.
EDIT:
another solution would be to remove gnome and reinstall it from scratch. (some please tell me if i am doing this correctly. thanks )
1. clean your catch:
pacman -Scc
2. remove gnome, gnome extras, and whatever other gnome files you might have installed
pacman -Rscn gnome gnome-extra etc...
3. reinstall gnome and gnome extras
pacman -Sy gnome gnome-extra
4. reconfigure your desktop the way you want.
Last edited by czechman86 (2008-05-28 23:42:43)

I have pending app updates that will not update, any suggestions great fully received

I have pending app updates that will not update, any suggestions great fully received

Try This...
Close All Open Apps... Sign Out of the Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

MacBook that will not reboot- stuck on apple logo and spinning gear

Hello I have a MacBook that will not reboot. It gets to the gray screen with the apple logo and the spinning gear and that's it. I have tried restarting the PRAM, performing safe boot, and verbose method. What can I do to get my Mac back? please help

Try holding the power button for about 10 seconds and try powering it on again. If all else fails, bring it in for servicing.
- Dominic

My Time Machine will not perform a back up!!! Can someone help?

I have recently bought a ne IMAc 27inch have been able to transfer all my data from the old iMac24", which is a lot and now my new Time Capsule with 2T of HD will not perform backup. Every time i try to set up TM I get the following message:
I have reserched on Apple forums and have found soluions such as restart the TC, turn it on and off several times, erasing the TC though AirPort Utility (which, by the way has taken over 8 hours), so I am desperate now!
Can someone help?
My new computer has two HD one SSD and one Analog, it's a brand new iMac.

My new computer has two HD one SSD and one Analog, it's a brand new iMac.
The "Analog" disk; it is mechanical with platters which are entirely digital.
Did you name both disks the same?
If so rename a disk.. that is what the error message says.. you cannot have two identically named disks.

I have a iPhone 4 that will not stop resetting itself on its own this is my fourth phone and the second to have this problem

I have a iPhone 4 that will not stop resetting itself on its own this is my fourth phone and the second to have this problem. I have AT&T so I need to post here instead of actually being held to get help on a Sunday night. this is a extremely frustrating situation as I count on this phone for business.

Are you restoring your phone from a previous back up? If so there could be a problem within the back up. Try restoring your phone as a new device and then manualy reinstall all apps.

Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

You can try the script mentioned in #1 here: Re: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.
Here's how to install a script: http://indesignsecrets.com/how-to-install-a-script-in-indesign-that-you-found-in-a-forum-o r-blog-post.php

Ultra 24 that will not perform POST

Similar Messages

Maybe you are looking for