Ultrabeat in Logic Pro X is missing drum kits

Hi,
So recently, I got Logic Pro X because I've been meaning to try producing house music with it. I was introduced to Ultrabeat in some tutorials saying to click the dropdown menu (at the top) and select 01 drum kits and choose Trance Kit 02. However, when I click the dropdown menu, I seem to only have 8 samples in the drum kit and none of them sound good at all. Why do I have only 8? I've seen other discussions where people have up to 25+, is this something that I can download from the additonal content? And if so, what is it called?
Many Thanks!
MChen.

Try Drum Machine
....and also the Logic Studio 2 Compatibility Sounds and Instruments found under the Legacy entry.... along with the GB 11 Sounds and instruments.. and finally the Instruments found under Jam pack 1, Jam Pack Remix and Jam Pack Rhythm,
Also make sure the Essential Sounds and Instruments set has downloaded completely too...
Personally, if you have the space, I'd download all the content...  as there is so much on offer for free... that you may find useful in the future.

Similar Messages

  • New bug in Ultrabeat into Logic Pro 8.0.1

    Hey guys check this... a brand new bug (hope it would be only my mac, but with 8.0.0 there wasn't)
    so open ultrabeat, choose the preset called Drag & drop samples under Drum Kits.
    (just to use one free preset)
    load a file and record something, then press play in order to listen your drum and try to load an other sample to make comparison (example: load a kick, do a 4/4 drum, try to replace the kick with an other sample and check the Preview sample in ultrabeat to try comparison... )
    after this update no more Preview sample in ultrabeat voice (and than note will stop on playing when u try that function
    sorry for the english

    finally i find someone else with the same prob, o already post into apple.com too
    yes here the same, bug new in 8.0.1, cause on logic 8.0.0 all works fine (except some click noise when you pre-listen a file in autoloop)
    however here what i can say to you (it's 3 days i'm studyng this cause i make a massive use of ultrabeat)
    - no matter both power pc / intel soffer of this bug
    - i try to update to leopard from my 10.4.11 (same bug) tryin a new os installation (same bug), tryn without audio card and driver (same bug)
    so i really don't know how to solve it, cause there are only few people that have this problem
    big mistake and big mistery

  • Mainstage Ultrabeat into Logic Pro 8?

    Hi,
    Does anyone know how I could Export a Mainstage "Ultrabeat" (not just a loop but say a five minute improvision jam) into Logic Pro 8, so I could improvise over it in Logic Pro 8? Especially the rhythm combinations. Thanks!

    I think you can use something like Soundflower to route audio from one app into another.
    You can always just open the same UB channel strip setting in Logic and do everything in there that you would do in Mainstage.

  • Help with Logic Pro X and Addictive Drums

    Hello guys!
    Please be patient (and understanding) with my questions
    I'm trying to do just a basic task, and once I know how to do it, I will expand upon it.
    At this point, all I want to do is use Logic Pro X to record a Drum Track, a Bass Guitar Track, a Electric Guitar Track, and a Vocal Track.
    1) Would you start a New Project from Songwriter or Multi-Track (and why)?
    2) From what screen and how do you open Addictive Drums?
    3) Once Addictive Drums is open, I will pick one of the Preset Patterns and drag it to the Favorites Window on Addictive Drums.
    But once I do that, and here's the most important question (so far ), how specifically do I get/put that Drum Pattern into Logic Pro X?
    Thanks in advance!
    Jerry

    i've been looking into getting the 01X and been doing some reading. i have no experience with it but i'm interested in hearing more about how you get on. i did find that www.o1xray.com has a forum full of information about setting up logic and the 01X. ElmerJFud seems to be the main dude, his post has a lot of setup information: http://www.01xray.com/forums/showflat.php?Cat=7&Board=01X_Macintosh&Number=19978 0&page=0&view=collapsed&sb=5&o=&fpart=1

  • TS5426 Logic Pro X templates missing

    I've installed additional orchestral content and the Orchestral and Music for Picture templates are still unavailable. Am I missing something?
    Custom templates also do not appear when I save them.
    Logic Pro X 10.0.7
    Mac OS X 10.9.4
    Macbook Pro Late 2011

    Is it supposed to be for 7 string guitar? You'll have to read this:
    http://help.apple.com/logicpro/mac/10/#lgcp204e230e
    and especially the chapter Determine the string assignment. It sometimes does react strangely (like not showing E6) I must admit. Start a new project in score mode and try to enter a scale from the lowest string up to the highest string. Now change midi channels, in the event editor, observing how this provokes different possibilities of identical notes on the fretboard.
    Have a nice day!

  • Help with Ultrabeat in Logic Pro 8

    A couple of things I want to learn/be able to do in Ultrabeat
    Customizing drum kits - what I mean by this is, I want to be able to freely pick desired drum sounds from the multitude of logic libraries, mixing and matching them in the ultrabeat sampler. Like say taking a kick drum from one kit and a snap from another, and building up my own custom kit in the process.
    Assigning specific drum sounds in ultrabeat to desired midi controller pads - say assigning a kick drum to a pad on my midi controller and a snare to another, etc (this would actually be useful for just sounds in general).... I have a axiom 25.

    Discipline Wali wrote:
    A couple of things I want to learn/be able to do in Ultrabeat
    Customizing drum kits - what I mean by this is, I want to be able to freely pick desired drum sounds from the multitude of logic libraries, mixing and matching them in the ultrabeat sampler. Like say taking a kick drum from one kit and a snap from another, and building up my own custom kit in the process.
    Each voice in ultrabeat can hold a sample in OSC1. Drag a sample or audio file into the sample area.
    Or use the import button to choose a preset Kit. Then click the arrow next to import and click on a sound in the list to audition it. Then drag it onto the voice (on the left assignment area) you want.
    Assigning specific drum sounds in ultrabeat to desired midi controller pads - say assigning a kick drum to a pad on my midi controller and a snare to another, etc (this would actually be useful for just sounds in general).... I have a axiom 25.
    What BeeJay says!
    good tutorial on Ultrabeat over at -
    http://www.macprovideo.com/tutorial/logic9204
    current offer there is 20% off downloads or subscription -
    http://www.macprovideo.com/summerstartersale10
    they seem to be in summery mood!
    JG

  • Problems Opening Ultrabeat in Logic Pro X

    Hey guys, I know this might be a dumb question but I just can't seem to find an answer. I can't seem to find out how to open Ultrabeat in Logic X like I was able to in Logic 9. Can someone tell me how to open it because it is becoming frustrating searching for it.
    Thank you!!

    Hi Moff,
    It's in the same place as all the other Apple AU instruments.
    If you look at the track inspector section of your instrument track (via clicking the the big i at top left) you will see a slot for "instrument" between Audio and MIDI effects slots. Click the little arrows (or the word instrument) and a list will appear. It's in that list about 2/3 of the way down.
    That's it!
    best
    jake

  • Logic X Staff Styles for drum kit:  can't position?

    I'm new to Logic but l I believe I'm doing this right and have hit a bug.  By default, the snare drum is mapped to what would be a "b" in treble clef.  I'd like this to be mapped to a "c".  To change this, I open Staff Styles and edit the mapped style for drums.  The snare group is at position "-4" by default, which I believe means it is four steps down from the the top staff line.  I want to change this to -3 to move it up to a "c".  I can change the value by clicking and dragging the -4, but when I do this, instead of the note moving up, it snaps to the top (position 0) and stays there.  If I close this window and re-open it, sure enough, logic has assigned a zero to the position.  No change seems to affect it, and if I save a project like this the snare group is forever at position zero, basically ruining the project.
    Has anyone experienced this?  Am I doing something wrong or is this just a bug? If it's a bug, does anyone know a work-around?
    Thanks for any insight,
    Brian.

    Hi
    Brian Pepin wrote:
    Has anyone experienced this?  Am I doing something wrong or is this just a bug? If it's a bug, does anyone know a work-around?
    Confirmed bug in LPX 10.0.7 ( works as expected in 10.0.6)
    There is a *very* clunky workaround:
    Create a new Mapped Instrument object in the MIDI Environment and cable it up to the required software Instrument channel object.
    Drag the Mapped interment object from the Environment and drop it on the required track in the Track area track list ( to route the track via the new mapped instrument object)
    Edit the snare entries in the mapped instrument object: up 0.5 transposition)
    This change is not immediately updated in the Score; you have to change the staff style to any other one then re-apply the #drums style.
    CCT

  • How do you export a drum track to Music XML from Logic Pro

    I have a song in Logic Pro with a compound drum track that consists of a Drummer subtract as well as a manually written drum track using the same kit (for specific fills and kicks) as well as a drum line with auxilliary percussion. I kinda figured there was no way to combine the subtracts, so I am OK exporting each to Music XML separately (although if someone knows how to combine, I am all ears). I created a new software instrument using the same drum kit as the Drummer track and options-dragged the Drummer track to the new software instrument to convert it. However, when I view the Score Editor window for ANY of the three drum tracks, it does not come up in drum notation, but in bass cleff. The Style is blank and I don't know how to change it to drums.
    I want to export to MusicXML to give my drummer music, so I am exporting this to Musescore.
    Does anybody know how to export drum tracks properly? I am using Logic Pro 10.0.7
    Thanks in advance!

    Thanks for the quick response!
    I got the Join part, but when I look at the Score view for the song below I don't get the characteristics editor your screenshot shows (see attachment one). However, I can pull this up if I select on the regions in the track I want and select Window -> Score Editor. However, under Style, I can select the pulldown with a bunch of pre-defined options, non-of which are "#Drums". How does one put #Drums into the Style field (see second attachment)?

  • Where do i find the classic hip hop remix ultrabeat setting in logic pro x, i have downloaded all drum kit additional content and have yet to see it. please help!

    i have been looking all over for this setting, really wanna make hip hop beats with this ultrabeat setting but i cant find it, it says i have intalled all the drum kits but i didnt install a few other packages i thnk have nothing to do with ultrabeat, just wondering how you get this and more drum kits for ultrabeat, i have about 15 but have seen people with close to 30 so please help me out on where to get additional kits! i have downloaded all additional and still cant find it!

    Try Drum Machine
    ....and also the Logic Studio 2 Compatibility Sounds and Instruments found under the Legacy entry.... along with the GB 11 Sounds and instruments.. and finally the Instruments found under Jam pack 1, Jam Pack Remix and Jam Pack Rhythm,
    Also make sure the Essential Sounds and Instruments set has downloaded completely too...
    Personally, if you have the space, I'd download all the content...  as there is so much on offer for free... that you may find useful in the future.

  • Where is the button to transfer sequences to the arrange window in Logic Pro 7's Ultrabeat?

    Hi guys/gals,
    I have a pretty old version of Logic, it's Pro 7. Anyway, I mess around with it from time to time and I am currently trying to program some drums using Ultrabeat, which, to be honest, I have totally ignored in the past.
    I have created a sequence and I now want to place it into the arrange window, but cannot find the button which, from everywhere I have searched, should be in the bottom left of the plug in, near the pattern selector drop down. I have taken a screenshot of how my Ultrabeat looks. If you can find this mysterious button then please let me know, as it is driving me nuts! I simply cannot find it anywhere.
    Thanks for your time.
    Archimbaldi.

    Hi
    This function was added in Logic Pro 7.2
    http://manuals.info.apple.com/en_US/New_Features_in_Logic_Pro_7.2.pdf
    page 98
    CCT

  • Logic Pro X - Only drum machines do not respond on MIDI controller

    98% of the time, when I load a drum machine, only a few of the keys on my MIDI controller will respond with sounds. If I switch to any other instrument patch, all keys work perfectly, but when I switch back, it's still spotty. I've disconnected and reconnected, restarted Logic, restarted the computer, and opened new sessions. Anyone have any advice?

    Ahh.. ok, it was hard to tell from your original post.
    When loaded are you seeing any notifications that samples are missing?
    Could possibly by Logic/controller related. (Is this Logic-X?)
    Try deleting Logic's preferences:
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the  com.apple.logic10.plist  file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
    If you are having trouble with a control surface in Logic Pro.
    then delete the com.apple.logic.pro.cs file from the preferences folder.
    be sure to delete both files.

  • How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

    how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

    I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
    The way I do it, is I assign all my drum tracks to a buss, say buss 1.
    Then, on buss 2, I assign it's INPUT to buss 1.
    So buss 1 (all the drums) are feeding into buss 2 simultaneously.
    Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
    You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
    I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Drum loops on Logic Pro 9.?

    I have just installed Logic Pro 9 and I am trying to follow the first tutorial  which is an exercise with Apple Loops.  I had a message to say that  there weren't any Apple Loops on my system "Please reinstall Apple Loop Package."  .  I installed iLife which had been missed off my iMac on a recent upgrade at the Apple Store and when I  went back to the Logic exercise, I find that the piano, guiatrs and many other instruments are greyed out.    What should I do?

    If you haven't done so already you may want to try and download Additional Content.

Maybe you are looking for