Ultrabeat Patches/Presets Question

I'm sure this will have been asked & probably answered before but i have done a search & found nothing on it.
So I'll apologize now.
Ok Ultrabeat patches or Ultrabeat presets.
I know that Logic 8 already has an extensive library of presets for Ultrabeat but i have pretty much been through them & used them to death.
My question is this , Is there any way i could get hold of more Ultrabeat presets or even more patches for the step sequencer.
Thank You

Hi Sampeconstruct
Ive started down the programming them myself route to be honest i was being lazy
Not much response so i assumed the answer to my question was no
It was more the patterns to use in the sequencer i was after really
Ive been getting some interesting grooves using the transform window in the piano roll aswell after creating a sequence in UB

Similar Messages

Patch fundamantal questions

Yesterday I have installed a latest CPU completely different way. During my six month career in oracle I always install a patch by simply double click on setup and afterward run upgrade assistant which update oracle version. But yesterday I have install patch completely different way. I have download patch the first thing to note there is no OUI setup. Patch readme file used Opatch utility to install patch. I have stated working according to readme file instruction but soon I came to know that Opatch utility not install on my machine than I installed Opatch and than patch but all these working raised my question in my mind plz help me to clarify the concept
What are the different type of patch exist
What is the difference b/w patch that change version or also have OUI setup and patch which install through Opatch utility.
Can we use GUL interface instead of Opatch utility
Why did not run upgrade assistant after Installtion of patch
Why this CPU did not change version of database
How we check either patch install successfully or not (Most important question)

What are the different type of patch exist
Documented on Metalink
What is the difference b/w patch that change version or also have OUI setup and patch which install through Opatch utility.
Documented on Metalink
Can we use GUL interface instead of Opatch utility
Documented on Metalink
Why did not run upgrade assistant after Installtion of patch
See Question 1
Why this CPU did not change version of database
See Question 1
How we check either patch install successfully or not (Most important question)
Documented in the Readme.
Basically it boils down to the problem you still want everything delivered on a golden plate on your doorstep and still can't be bothered to read readily available documentation and go on abusing this Forum to abstract documentatiion you refuse to read.
Sybrand Bakker
Senior Oracle DBA

PhotoShop CS2 and PDF Presets question.

Hello,
I have installed the recent free release of Adobe Photoshop CS2 on my Win 8.1 PC.
I am creating the artwork for a CD Cover, by using a CYMK template from CD-Baby.
They require that the finished artwork be submitted to them in PDF format, using the [PDF/X-4:2008] preset.
I found that Photoshop CS2 didn't come with this preset, but after searching the web, I came across this forum whereby a user posted a link to a "JobOptions" archive file at...
http://dl.dropbox.com/u/16243351/joboptions.rar
... I downloaded this RAR file and found that there was a file inside called "x4;2008.joboptions"
I installed this preset by the 'EDIT/Adobe PDF Presets/' route, and it seemed to successfully install the preset.
(No errors at least).
Now when I go to save my finished project as PDF, I am given the choice of...
* [PDF/X-1a:2001]
* [PDF/X-3:2002]
* x4;2008
(this is the exact description of each preset).
My only question is, do you think the desired [PDF/X-4:2008] was correctly installed?,
I'm not sure since the naming format is not exactly the same as the first 2 presets descriptions.
Thank you.

thanks for your reply Mylenium.
is it possible that this user preset might not exactly conform to the desired preset I'm after?
is there any way I can get a genuine copy of the factory preset [PDF/X-4:2008]?
thanks.

OWB 10.2.0.2 patch - two questions

Hi, two quick questions that I haven't been able to get answers to:
1. Does anyone know how far away the Solaris version of this patch is?
2. I'm trying to figure out if I can use the 10.2.0.2 new client against a 10.2.0.1 repository. Don't see anything in the installation notes - does anyone know if this is possible?
Thanks!
Scott

Hello :)
Don't know the answer tot he first one.
As for the secong one - this is the extract from the documentation available as 'read me' for the patch:
To upgrade from a 9.2.x or 10.1.0.x version, first download and install Warehouse builder 10.2.0.1 into a new ORACLE_HOME.
Apply the 10.2.0.2 patch over the 10.2.0.1 ORACLE_HOME as described in the next section.
After applying the 10.2.0.2 patch, migrate the design data, using MDL export, and migrate the runtime data. For instructions on migrating data, refer to an installation guide for Oracle Warehouse Builder 10g Release 2. You can follow the instructions either in the original Warehouse Builder 10.2 guide, which is part number B28224-02. Or you can follow the Warehouse Builder 10.2.0.2 guide, which is part number B28224-03.
Upgrading from Warehouse Builder 10.2.0.1
sorry i couldn't paste the entire document but if you go to the page where the patch is and then go to READ ME (which also lists what was fixed in this patch):
Looks like you need to upgrade to R2 first.
Hope this helps
Kind Regards
Vix

DVDSP preset question with batch processing.

I hope someone can help.
When I drag my files that I want to batch process, where I can
choose the output, for example DVD HD, etc.
These presets have different times with them for video, like 120, 190, or even 30.
My question is, what is the difference between them? Does any of them produce better quality of the video?
My video files are .avi files and run about 30 minutes.
Also, does it matter which I choose as far as HD DVD, DVD best quality, etc., if these are already .avi files or just choose DVD HD and have the best quality possible?
Thank you for any help that is given.

About the numbers, the 30, 120, 190, etc. What do
those numbers mean?
Are they minutes? And if they are minutes, does that
mean it goes by how a regular dvd has minutes on it
or does it go by how long each file is, or total size
of project?
What those numbers mean are the amount of material that will fit on a DVD-5 based on the encoding settings, so in other words if you choose 120 it means that about 2 Hrs of running time of video will fit on the DVD encoded at that rate. Normal and high quality are whether it is a one pass or two pass
I am still a little confused.
I have 10 .avi files. Each one is about 30 minutes
long and is about 300mb.
I am unsure on what video setting or settings to use
that will allow me to have at least the same quality
as the files already are.
Encoding will reduce the quality, sometimes you may notice, other times not, but you have about 6 hours worth of material there. Depedning on what it is you can make a DVD-9, but unless it is very low motion probably not a DVD-5 (Also 300 Megs for 30 minutes of material (and I have not looked at new avi codecs recently) sounds like the material is already compressed heavily
To give you a rough idea, DV which is what comes from many consumer cameras with firewire, is compressed at a rate of about 5:1 already, and 9 minutes 20 seconds is just shy of 2 Gigs, so 30 minutes would be in the area of 6 Gigs of DV (or about 18 times the size of your files)
i have already done the audio portion of each file so
the video portions are all I need to do now.
Best thing to do is play with the settings, test small sections where there is less motion and more motion. In general 2-Pass is going to provide you with better results than one pass

10.2.0.4 Patching failure question.

OS :- AIX 5L
DB :- 10.2.0.2
I was doing Patching from 10.2.0.2 to 10.2.0.4.
Before doing any patching i always take tar backup of binaries.
While doing Patching at some 30% i got error as below
/oracle/SID/102_64/rdbms/demo/aqxml.sbs (invalid file system control data detected)
I tried searching all over but couldnt find much.
After this thinking that its part of demo folder i ignored it and went ahead but
it started giving same error to all files which it was trying to copy. and OUI gave only option to stop installation.
cause was that there was OS corruption introduced on /oracle/SID Filesystem.
SA tried to unmount the filesystem which was not happening because there was corruption and it was not allowing to write anything on /oracle/SID. We rebooted the system. ran fsck and mounted back the /oracle/SID.
After this i moved the original binaries folder and untar the binaries backup in /oracle/SID.
DB came up properly using untarred binaries no issues.
But question is now i see there is some 300mb difference between size of moved old binaries folder and new untarred folder.
Old one which was 30% patched is 300mb more than untarred folder.
If i had not taken tar backup of binaries would i be still able to use same old binaries??
I mean is OUI that much intelligent to not to touch original binaries until copying is done or
Does it restores old binaries if new Patching fails?
Hope i have put it in proper words!!!!!!

Hi,
Welcome 2 Oracle Forums :)
I mean is OUI that much intelligent to not to touch original binaries until copying is done or Does it restores old binaries if new Patching fails?
No i don't think so. It will copy all the files in the $ORACLE_HOME, better check the Installation logfile of patchset.
It is highly recommended to take full backup of Database and $ORACLE_HOME before performing any upgrade.
Regards,
X A H E E R.

Patch-upgrade questions

I have been asked to get our phone servers all up to date with the latest OS patches (service releases) and have a question that i cannot seem to find an answer to. Our phone system consists of 4 servers (Cisco 78XX MCS) 2 of which are our Call Manager publisher and subscriber and the other 2 are our CRS servers (IPCC Express). The difference is that 2 of them are 7825's and 2 of them are 7845's but they are both running the same OS (OS image, OS Service release, OS upgrade). I was looking at the available service releases on Cisco's site 'http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-41' but it looks like those are specific to CCM so I just need to know if I can download those patches and apply them to both the CCM and CRS servers or is here another link that shows the downloads for the CRS servers operating system? I would think that it would be the same but I just wanted to check with the folks around here as I don't think that would merit a TAC case. If anybody knows if I can use the same patches and what not on both the CCM and CRS servers I wouls appreciate it.

Hi Matt,
Great question! The page you were looking at is for SR's and patches for the Callmanager 4.1 Train specifically and would not be loaded on the IPCC servers.
For OS Versions, they generally are the same on both. Here is a clip from the ReadMe for 2000.4.5a. These are always highly recommended reading to verify the required pre-load etc;
Operating System Upgrade 2000.4.5a (win-OS-Upgrade-K9.2000-4-5a.exe)
Release date: 31-JULY-2007
Readme last updated: 30-JULY-2007
Information about This Service Release
The upgrade supports the following Cisco IP Telephony Applications that run on Windows 2000 Server or Advanced Server:
***Cisco CallManager and all compatible versions of Cisco IP Interactive Voice Response (IP IVR), Cisco IP Call Center Express (IPCC Express), Cisco IP Queue Manager (IP QM), Cisco Personal Assistant (PA), Cisco Emergency Responder (CER), Cisco Conference Connection (CCC), Cisco MeetingPlace, and Cisco Customer Voice Portal (CVP).
Minimum OS Requirements: (Fresh Install or Upgrade Versions of) - 2000.2.7, 2000.2.7a, 2000.4.1, 2000.4.1b, 2000.4.1c, 2000.4.2, 2000.4.3, 2000.4.3a, 2000.4.4, 2000.4.4a
http://download-sj.cisco.com/cisco/crypto/3DES/voice/cmva/win-OS-Upgrade-K9.2000-4-5a-Readme.htm
These are available (with CCO Login) via;
Unified Communications Manager & Voice Apps Crypto Software
http://www.cisco.com/cgi-bin/apps/tblbld/tablebuild.pl/cmva-3des?sort=release
For IPCC the patches are under> Customer Contact > Cisco Unified Contact Center Express > further down the Software Download page from CCM 4.1 etc
http://tools.cisco.com/support/downloads/go/Model.x?mdfid=270569179&mdfLevel=Software%20Family&treeName=Customer%20Contact&modelName=Cisco%20Unified%20Contact%20Center%20Express&treeMdfId=268439682
Hope this helps and makes some sense!
Rob

Bursting patch - ebs - questions

Hello all,
We will be implementing the bursting patch - 5968876 - this week on our environment.
xmlp - 5.6.3
ebs 11.5.10 cu2
I have a few questions that hopefully someone could answer.
1) Is there any good documentation on this process , with the new patch in place,
other than the readme in the patch files ?
2) Now that we upload a control file, will that automatically set off the bursting process,
or do we have to make a specific call for the XDOBURSTREP program to run ?
3) is CUPS a mandatory install on our server ( HP-UX 11.11) for this process ?
4) I have seen that people mention they call bursting process from an after report trigger
in a report. What if we are not using a report ? how would / could this call be made
then?
thanks much in advance
cheers...
James

I didn't get a response but I have seen a bursting control file example that uses cc so am guessing that bcc can be used.
As for the exception, I implemented a summary report that is burst to file. This always gets generated so I don't get the exception. I believe that Is what the other thread, I was looking for, did but was not able to confirm that.
Cheers,
Dave

CPU Patch related question

Hi all,
We are using Oracle 9.2.0.6 on RHEL4 64 bit
What is the use of CPU patch.Ealier we are using Sun Solaris server but after migrating to rhel, we are getting problem in one of the applicaion module.
but i don't know whether we are haing any cpu patch applied on the sun server.
and which patch should i applied for oracle 9.2.0.6 and how to apply it.
Does the steps to apply the CPU patch is same as it is applying the patchset of 9.2.0.6.
Please suggest me.

As CPU's are security patches (which you can get from Metalink), did you even consider visiting Metalink?
You would have found
https://metalink2.oracle.com/metalink/plsql/f?p=130:10:5691407109246679955::::ALLTEXT,ANYTEXT,EXCTEXT,NONTEXT,KNOWLEDGE,PRODUCT_ID,PLATFORM_ID,SS,ST,NUMHITS,FILTCRIT,FILTCRITVAL:CPU,,,,TRUE,,,0,DR,100,2,Support.CriticalPatchUpdates
Metalink answers all questions on CPU.
You should use available resources, as per the Forums Etiquette post, PRIOR to asking them here, forcing volunteers to summarize or abstract information which IS already on your doorstep.
And you would have noticed you need 9.2.0.8 to apply CPU's.
I also suggest you only ask questions after you have done some research. You shouldn't ask questions like this, and they don't deserve an answer. You can find the answer yourself with little effort.
You seem to think the only thing you need to know to work as a DBA is how to use this forum to ask all of your doc questions. You won't get far this way.
Sybrand Bakker
Senior Oracle DBA

Spot&Patch presets

I am trying to use Spot&Patch tool. After each fixed blemish the settings (softness,opacity, etc) return to default.
How to keep the same preset for at least one image ( this adjustment does not have Preset Action pop-up menu)?
Thanks.

The only thing I can think of is they assume that instead of using presents for that, you would be lifting and stamping Spot applications from other images.
However, I would like to see presets there as well in order to define some common edge softening and other parameters...

Many Patch/Upgrade Questions/Processes for SAP Systems

Hello, I am trying to wrap my head around the patching/update process in SAP. I am familiar with how to use SPAM and SAINT, but my questions are more about the process as a whole. Here are some of my concerns:
- Do you update the OS or SAP first?
- Do you just apply only OS Service Packs or do you do all security patches as well?
- Should kernel updates be done before or after database patches?
- How do I update the kernel on a cluster?
- Should you go to the latest database patches available or go to a certain level?
- Are some areas more important to update then others?
- How are all of our customizations (1000+ in ERP) handled by the patches?
- What if we implemented an OSS Note that is fixed in a support patch?
- How do we test to ensure we are not doing damage?
- Can you uninstall security patches?
- Is there a way to know what t-codes are affected by the updates?
Just for reference, we are running an ECC 6.0 system on Windows 2003 x64 servers, with a MS SQL 2005 db. Our Prod environment is running in high-availability via MS clustering services. Your input on these questions is appreciated.

Hello Techies,
I am new to SAP and have done course in SAP-BASIS MODULE.
I would like to know the major tasks to be done by basis admin daily,weekly,monthly and how and when to do those tasks???
Please help me out...i am in a desperate need of it..
please mail me on
my email id <removed by moderator>
Thanks & Regards,
Ayaz

Ultrabeat init preset

Hey All,
Does anybody have a good init preset instrument for Ultrabeat (i.e a blank default) that you'd be willing to share.
Or...how can I set one of the 24 channels the way I like and copy that to the other 23? I can only find a copy/paste for the whole instrument itself....

In Ultrabeat, I've created a blank preset for samples only. Once you create the voice setup that you want, right click on the voice name and select "Copy (Voice & Seq)". Right click on the rest of the voice names and select "Paste Voice".

Patch update question (didn't think it is this complicated)

Hi,
I just started looking into weblogic server maintenance. New critical patch just went out.
We currently have adf 11.1.1.4 on weblogic 10.3.4 (yes i know we are due for an upgrade) with jrockit-jre1.6.0_26-R28.1.4 on production server.
New new patch came out for Jrockit R28.2.4 and earlier version.
Can anybody suggest me a path to apply the patch? Meaning, on staging server they just install this new Jrockit version (on top of the current installation) and see how current application behaves and if everything looks good, they install on production?
Also, the patch note doesn't say anything about if it is supported for welogic 10.3.4 or not. I believe, certification requirement are not updated as of now for this new patch. Any suggestion you guys have for me look into before going ahead and test this patch on staging server?
pls let me know if you need any further information.
Thank you
-R

As you have a support contract this is a perfect question for support. I doubt that we can help you out here.
Timo

Capturing Hi8 A/V through Digital8 Camcorder - FCP preset question

After putting this off for years (so long that I forgot what to do) I am finally getting around to loading the old family library of Hi8 video footage shot in the 80's and 90's with a Canon A1 through a Sony DCR-TRV320 to do the analog to video conversion enroute to the Mac through FCP 6. After trial and error I have fumbled my way through the appropriate camcorder settings (Analog Video Out conversion to Digital Video Out, Audio bit rate changed from 12 bit to 16 bit) to eliminate the audio sampling rate mismatch error I was getting in FCP after Capture Now imports.
My latest test loaded OK with no errors. I am still left wondering if I should change the audio frequency preset in FCP. I can't find authoritative info on what audio frequency the original Hi8 material was recorded in. Changing the bit rate from 12 to 16 on the Sony camcorder fixed the FCP mismatch error I was getting, but I wonder if I am screwing with the sound by leaving the FCP preset at 48 kHz. If the Hi8 material was recorded at a lower frequency, will the audio be OK if FCP is importing it at 48 kHz? It sounds OK but I haven't done a headphone test. Just wondering if I have to create a special preset at a lower frequency or just leave it alone, now that I solved the bit rate problem.
Thanks!

Thank you all for the expert advice. I just found the manual for the Sony camcorder used for the analog to digital conversion and it lists two modes for its PCM system 1) 12 bits/32 kHz, 2) 16 bits/48 kHz. If I understand you correctly, it doesn't matter how the audio was laid down by the Canon A1 analog, since the Sony is converting it to 16/48 (or 12/32 which was my problem earlier, before toggling the Sony menu setting). Is that right?

Printing presets question

I am trying to figure if what I am about to discuss is normal or a bug. So I go to print a picture, I configure the settings the way I want for an 8x10 (as an example). Among the settings I select the printer (my color printer) and the paper size (8x10). Before actually clicking on the print button I save the preset and call it "8x10". After saving it, I continue with the printing process without issues.
Let's say at some point in the future I want to print another 8x10. So off I go to print. I open the print screen and select the "8x10" preset saved from the previous session. Well, the printer displayed is the one defined as the default printer in "System Preferences" (in my case a black and white laserjet) and the paper size is the default 8 1/2 x 11. Is this the way it is suppose to be? I mean, if as part of a print process I define a printer and the paper should it not be stored as part of the preset?
So is what I am experiencing a bug or is this the way Aperture is configured to work? I find it annoying having to change the printer and the paper size every time (it is a mistake waiting to happen). I could set my color printer as the default in System Preferences but then every time I print out of any other program I will have to change the printer setting in that program.
Thanks in advance.
P.S. Using Aperture 3.0.1
Message was edited by: Coqui-

Thanks for your reply. When using 3.0 non of the settings I saved when creating a preset would be there if I tried to use the preset again (there were times when the saved preset would just disappear).
With 3.0.1 some of the settings are saved, like image size, crop to fill, and watermark. But the printer and paper size always bounce back to my laserjet and letter size.

Ultrabeat Patches/Presets Question

Similar Messages

Maybe you are looking for