Ultrabook Envy 6 1112TX unable to install sata disk with HDD mounting part 686594-001

Hi,
I bought my Envy 6 1112TX,  it only has a small 128 msata SSD disk.   So I decided to install a new SSD to increase the storage.
After checking the user guide,  I purchased the disk mounting part  686594-001,  then I found that the cable is no where to connect to the laptop motherboard.  The interface doesn't match, so I cannot find any suitable socket to plug the cable from the disk mounting bracket.   
There is a socket labelled as JHDD2 on motherboard, but it just cannot fit the cable,  and where JHDD1 is labelled, there is just no socket at all.
So please advise if the part number is wrong which indicated in the user guide,  or there is another socket which I missed, thanks a lot.
Regards,
Z.

robotech wrote:
Hi,
I bought my Envy 6 1112TX,  it only has a small 128 msata SSD disk.   So I decided to install a new SSD to increase the storage.
After checking the user guide,  I purchased the disk mounting part  686594-001,  then I found that the cable is no where to connect to the laptop motherboard.  The interface doesn't match, so I cannot find any suitable socket to plug the cable from the disk mounting bracket.   
There is a socket labelled as JHDD2 on motherboard, but it just cannot fit the cable,  and where JHDD1 is labelled, there is just no socket at all.
So please advise if the part number is wrong which indicated in the user guide,  or there is another socket which I missed, thanks a lot.
Regards,
Z.
Hi,
I think you need something like this. 
http://www.ebay.co.uk/itm/HP-Envy-SleekBook-6-1000-6-1006sa-HDD-SATA-Hard-Disk-Cable-DC02001-/171162...
The connector looks like an common white ZIF one. My Envy M6 has it. Is there a mSATA boot option in the BIOS? If not and you fit the hdd in it won't boot to the mSATA SSD.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Similar Messages

  • HP Envy 5532 Printer - unable to install a driver with full functionality

    Hi we have purchased a HP Envy 5532 all-in-one and were advised (and as stated on the packaging) that it will print 2 sided automatically.
    So far we have followed the instructions on various sites but we do not appear to have the option in the printer's Preferences  to be able to select 2 sided printing from the drop down list on the layout screen as there is no drop down list in there to select from as illustrated in the screen grab below:
    The options to the left of the screen grab allow me to select a manual 2 sided option where it will prompt us to reload the paper manually but no automatic options?
    Our operating system is: Windows 8.1 Pro 64-bit and we have been on www.hp.com and downloaded the appropriate driverfor this environment.
    The driver currently installed is: HP Envy 5530 Series Class Driver - the driver would not install off the disk which came with the printer so this was the recommended official download via the HP website
    We have run the HP Print and Scan Doctor supplied on HP Connected it found issues with the driver "the Driver does not have full functions installed" and attempted to download a fully featured driver - this has failed again and again.... to load
    We then downloaded and ran the "HP Installation failure unknown device" application and followed this to the letter 5 times!!! all this did was to stop the printer working at all. It ran until the install stage and then it keeps coming up unable to install on network - the printer is there on our network with an IP address???
    We disabled all Firewalls and ran the install without any start up items running via misconfig options as directed but still it fails at the same point on installation.
    We had to uninstall all HP drivers and let the PC "add a printer" via the Control Panel options which it has and we are able to print again but we do not have full functionality as we still can not print automatic 2 sided copies and when we run HP Print and Scan Doctor it still recognises that we do not have full functionality!!!
    Any help would be appreciated
    Thanks  Steve

    @Steve_Reeder, welcome to the Community
    I read through your post about how you do not have access to the full software and options for your Envy 5532, as the Full Feature driver is not installing successfully on your Windows 8.1 system. I saw that you have tried various troubleshooting steps, such as a Clean Boot (msconfig), the Print and Scan Doctor, etc.
    I will do my best to make some helpful suggestions to you to try out.
    It seems as though you are trying to install on your network, could you possibly try installing the printer as a USB connection, and afterwards converting the USB connection to wireless through the HP software (applies to wireless connection and not ethernet)? If you're installing ethernet, skip this suggestion.
    You could also try installing the printer under a Clean Boot (msconfig) and turn off your firewall, under a new user account with Admin Privileges, to see if that will work.
    Another idea would be to run the System File Checker to see if this scan will pick up any issues:
    Using System File Checker to Restore System Files
    Please let me know your findings thus far, and if you notice any error messages or codes, let me know all of the details.
    I hope to hear from you, enjoy your Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • [VIA] KT6 Delta hangs when I install SATA disk

    I've had a lot of problems with my PC - maybe related to the mobo, maybe not. I have a KT6 Delta LSR - and was running XP SP2 with a SATA disk on it. Not RAID - just standalone. It ran OK for about 4 months, then it crashed hard. For the last two weeks I'm trying to get my system back, but its not looking good. I think the CPU or mobo overheated - it was running about 62C - then I installed a new CPU fan and tried to render a DVD when it locked up and apparently wrecked my disk. I bought a brand new SATA disk and a new IDE disk. I installed XP fresh on the IDE disk. That runs OK. I removed the "old" disk (4 months old) from the system and installed a brand new SATA disk. But when I install the VIA SATA drivers, XP falls apart. By that I mean it can take up to 45 minutes to boot up (with an Athlon 3000+, 1Gb memory) and it acts VERY sluggish when I do finally get in.
    I don't know what to do. I'd like to try to recover data from my "old" disk to the new SATA disk, but the SATA drivers make working in XP impossible. I have bought a new motherboard - an ABIT board that supports SATA, but I hate to go to the trouble of replacing the mobo, if the problem is with SATA. Maybe SATA is not ready for general use yet? Is it still being developed and maybe it is generally unstable? As long as I'm, with IDE, everything seems stable. What should I do to get data off my SATA drive? I'm sorry I ever went SATA, that's for sure. Never again.
    Should I install XP on the new SATA drive like I did back in May and see if I can get data off the "old" drive - then maybe copy it to a network location somewhere? I have two fairly new 250 Gb. SATA drives that are basically useless. Unbelievable.

    I did not change the CPU. Just the CPU's fan. I did not reset the CMOS after doing that. I have a Thermaltake power supply and 1GB of  Corsair DDR 4000 - 2x512mb.
    In another post, I found a link to a post at Western Digital where WDC claims that the disk I have is the next generation of SATA and may not be compatible with the chipset in the MSI motherboard. They recommend to jumper two pins on the disk to help out. The only thing is that my WDC disk has been running OK since May and is the one that recently crashed. I bought a Seagate SATA disk to try to restore my system to, but whenever I hook up the Seagate, the system takes over an hour to boot up. Without the Seagate it takes a few minutes. I think that maybe the Seagate is also too new for this motherboard.
    I don't know how the consumer is supposed to know if a disk is compatible with a motherboard. I bought a SATA disk to use in a SATA equipped motherboard. Apparently newer versions of SATA are not backwards compatible but there is no easy way to know this in advance or to find out if your disk will work.
     

  • Unable to install grub to usb hdd

    Hello everybody. For 3 whole days I have been searching and trying to make this work but I am unable so, as my last resort, maybe someon here can give me a hand. I am trying to install arch to and old 30G ipod classic in order to use it as a portable USB bootable hard drive. I have followed all the instructions for a default installationa dn read the "Install Arch to USB" wiki. I have installed grub to the hdd with:
                         grub-install --target=i386-pc --recheck --debug /dev/sdc
    Where sdc is my ipod drive. Everything seems fine during the installation. ***I have also tried many alternatives of the above command (using --allow-floppy, --no-floppy, --root-directory) without success. All the installation is fine but I am unable to boot it. When I boot up, I select USB in my bios settings, to boot the usb and after a few seconds, I get a black screen with
    GRUB _
    and a blinking cursor.
    I have also tried installing syslinux but it's the same result (except I do not get the "GRUB" message, just a black screen and a blinking cursor". I any one has done this before or has any idea on how to make this work it would be immensely appreciated.
    Thank you

    DSpider wrote:
    iPod? Huh?? Then you should probably specify this in the title.
    Maybe the BIOS isn't set to boot from your equivalent of "Removable Dev." first, "CD-ROM" second and "Internal Storage" third, after which you need to adjust the boot priority order.
    Blank screen with blinking cursor means that you either installed to a partition instead of the whole drive (i.e. to "/dev/sdc1" instead of the MBR), or you didn't generate a grub.cfg.
    https://wiki.archlinux.org/index.php/Be … Guide#GRUB
    And don't forget to add the "usb" hook:
    https://wiki.archlinux.org/index.php/Be … nvironment
    Here you need to set the right hooks if the root is on a USB drive, if you use RAID, LVM, or if /usr is on a separate partition.
    Edit /etc/mkinitcpio.conf as needed and re-generate the initramfs image with:
    # mkinitcpio -p linux
    Another thing you should worry about, is that the drive is probably not that fast. It was designed for music and such (e.g. power saving by placing the files in cache, etc). It could drain the battery in mere minutes.
    I have already done all the things you mentioned. My bios boots the usb device as asked, I am sure of that. Grub was installed on the MBR not the partition. I have a grub.cfg file (generated automatically). I also already added usb to me hooks along with encrypt and lvm2 for my encrypted partition and regenerated the kernel image with mkinitcpio.
    I have good experience installing arch. I already installed my laptop arch with the same setup, a boot partition and a second partition, luks encrypted with two logical volumes, root and home and everything works perfectly.
    I have quickly read somewhere (can't remember where), that some bioses, when specified to boot from usb, do not look at the usb device's mbr. Is that true?
    PS: thanks for answering guys, it would really help me to resolve this problem. If i do, I want to install linux on other usb hard drives, not only the ipod.
    Also, multumesc domnul "DSpider" pentru raspuns.
    Last edited by freed_hum (2012-11-06 15:59:44)

  • Unable to Install / Uninstall iTunes, with error message.

    I am unable to Install or Uninstall iTunes on a friends laptop. The Error Message I keep getting is "Could not access network location %APPDATA%". I am connected to the Internet. Any suggestions??

    The iPod you purchased was discontinued almost 8 months ago.
    Download the latest iTunes here -> http://www.apple.com/ipod/start/

  • CS 3 Unable to install enterprising version with serial number screen opening

    unable to install enterprising version of CS 3 without serial number screen opening.
    History:
    originally download trial version it expired before I could deactivate it
    also installed CS (1)
    followed detailed steps to uninstall both of these.
    However computer must think that it is doing an upgrade and asks for a serial number which I don't have
    Any insight and you are my hero of the day!!

    This post should definitely help you
    http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
    Feroz
    Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights.

  • I am unable to Install windows xp with recovery disks.

    I have a Toshiba’s Satellite Pro S300-10J laptop Model#PSSB0E-02H00FDU. Some days back its operating system got corrupted. I have its recovery disks(windows Xp)  and now I am trying to reinstall the windows by using recovery disks but unable to do so. Actually when I insert disk 1 it start installation process and then prompt for 2nd disk and when I insert 2nd disk it starts unpacking software image process. At the end it shows a pop up box with the following information.
    Info:
                    Done(Files:28339/28339 Folders: 2558/2558).
                    Please remove the recovery medium!
                                                    |OK|
    As I remove the 2nd disk and press ok and then exit it goes shut down instead of rebooting. When I press power button to on it then it goes stuck on windows startup with a message of please wait .
    Please support that how can I get rid of this situation and can restore operating system with recovery disk.

    I made another attempt but nothing goes productive.
    One thing is clear that the recovery disks are ok because a few months back I used same disks to refresh my notebook and did it without any error.
    There might be a chance of bios setting because in my absence my sister and her friend tried to install windows and I doubt her friend made some changes in bios but she says that she didn’t made any change except boot priority and during installation got the error.
    I have already rest the bios setting to default and in SATA CONTROLLER MODE I changed it from AHCI into IDE.
    With recovery disks of XP Installation starts and after image loading it doesn’t restart just goes shut down and upon restarting just stop responding/hang up on startup.
    I tried with another CD of XP and during installation when system restarts setup continues on ‘INSTALLING WINDOWS’ with the message that ‘Setup will complete in approximately 35 minutes ‘Installing devices’ and at this stage it hanged up. Finally it shows blue screen with an error like
    Technical Information
    STOP: 0X000000F4 (0X0000003,0X89936670,0X899367E4,0X805D1142)
    Beginning dump of physical memory.
    On several attempts the result remains same.
    Need your valuable advice please..

  • Unable to install from AUR with yaourt

    I am having problems installing packages from AUR.  I can still use yaourt to install any packages from the official repositiories.  As an example, when trying to install zenlib, I get this message:
    ==> Building and installing package
    ==> Making package: libzen 0.4.15-1 (Sun Aug 8 18:30:43 CDT 2010)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Downloading libzen_0.4.15.tar.bz2...
    --2010-08-08 18:30:43-- [url]http://downloads.sourceforge.net/zenlib/libzen_0.4.15.tar.bz2[/url]
    Resolving downloads.sourceforge.net... 216.34.181.59
    Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
    HTTP request sent, awaiting response... 301 Moved Permanently
    Location: [url]http://downloads.sourceforge.net/project/zenlib/ZenLib%20-%20Sources/0.4.15/libzen_0.4.15.tar.bz2[/url] [following]
    --2010-08-08 18:30:44-- [url]http://downloads.sourceforge.net/project/zenlib/ZenLib%20-%20Sources/0.4.15/libzen_0.4.15.tar.bz2[/url]
    Reusing existing connection to downloads.sourceforge.net:80.
    HTTP request sent, awaiting response... 302 Found
    Location: [url]http://surfnet.dl.sourceforge.net/project/zenlib/ZenLib%20-%20Sources/0.4.15/libzen_0.4.15.tar.bz2[/url] [following]
    --2010-08-08 18:30:44-- [url]http://surfnet.dl.sourceforge.net/project/zenlib/ZenLib%20-%20Sources/0.4.15/libzen_0.4.15.tar.bz2[/url]
    Resolving surfnet.dl.sourceforge.net... 130.59.138.21, 2001:620:0:1b::21
    Connecting to surfnet.dl.sourceforge.net|130.59.138.21|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 134032 (131K) [application/x-bzip2]
    Saving to: "libzen_0.4.15.tar.bz2.part"
    100%[===================================================================================================================================>] 134,032 87.0K/s in 1.5s
    2010-08-08 18:30:46 (87.0 KB/s) - "libzen_0.4.15.tar.bz2.part" saved [134032/134032]
    ==> Validating source files with md5sums...
    libzen_0.4.15.tar.bz2 ... Passed
    ==> Extracting Sources...
    -> Extracting libzen_0.4.15.tar.bz2 with bsdtar
    ==> Entering fakeroot environment...
    ==> Starting build()...
    /usr/share/aclocal/cinepaint.m4:8: warning: underquoted definition of AM_PATH_CINEPAINT
    /usr/share/aclocal/cinepaint.m4:8: run info '(automake)Extending aclocal'
    /usr/share/aclocal/cinepaint.m4:8: or see [url]http://sources.redhat.com/automake/automake.html#Extending-aclocal[/url]
    /usr/bin/m4: cannot remove temporary file /tmp/m4-IpdGHp/m4-1000
    /usr/bin/m4: cannot clean temporary file for diversion
    /usr/bin/m4: cannot remove temporary directory /tmp/m4-IpdGHp: Directory not empty
    autom4te: /usr/bin/m4 failed with exit status: 1
    aclocal-1.11: autom4te failed with exit status: 1
    autom4te: cannot rename autom4te.cache/traces.0t as autom4te.cache/traces.0:
    automake-1.11: autoconf failed with exit status: 1
    autom4te: cannot rename autom4te.cache/traces.0t as autom4te.cache/traces.0:
    Aborting...
    ==> ERROR: Makepkg was unable to build libzen.
    ==> Restart building libzen ? [y/N]
    ==> -------------------------------
    ==>
    I should also mention that I currently have a partition of my memory mounted onto /tmp.  This is the corresponding line from my fstab:
    none /tmp tmpfs defaults,noatime,size=1024M 0 1
    I should have the permissions for my /tmp mount set up correctly.  Any help would be greatly appreciated.  Thank you in advance.

    Kotel wrote:I tried running just makepkg and I get the same errors that I got when using yaourt.  I didn't try running makepkg with sudo since it isn't the normal usage of makepkg.  Would it give any extra insight if I did try running sudo makepkg?
    No, I dont think so.
    Just for the record, the archstuff repo has the compiled libzen package:
    pacman.conf:
    [archstuff]
    # AUR's most voted packages
    Server=http://archstuff.vs169092.vserver.de/$arch

  • Unable to choose startup disk with "Option" key

    I recently ran into this problem after installing Windows through Boot Camp. When I boot up my Mac and hold the "Option" key it just ignores it completely and flies right on into whatever OS I have selected as my startup disk.
    It also will not work if I have a DVD or CD in the drive, and I noticed it is doing this even without a Windows partition.
    Any ideas or help is appreciated.
    Thanks in advance,
    Aaron

    As I said above, it works fine.
    I noticed this as well: none of the keys on the keyboard work when the machine starts up. I tried plugging the keyboard directly into the Mac instead of having, at I usually do, plugged into the Cinema Display and that didn't change anything.
    I recently just took the machine in for repair and the replaced an I/O board, any chance that may have something to do with it? It was working fine before I had the repairs.

  • Unable to install Itunes 8 with Vista 64 bit

    "The Winows installer service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance"
    I have tried everything that is around on the net, but still nothing, i always get the above message when trying to install itunes 8.0 Help anyone!

    Here is the fix for Itunes Windows Installer Service error and VB Script error. Go to OCNexus.com and look for 64bit WRk ArOunDs. Note "ITUNES 64bit WinInstaller Service" and download file and follow instructions.
    http://ocnexus.com/forums/viewtopic.php?f=2&t=20

  • Unable to install any applications with PCSuite

    I have the latest PC Suite. Problem:
    Cannot install any software onto the phone using either cable or bluetooth.
    Cannot browse the phone using the Nokia Phone browser as it comes up with nothing...it wont show whats on the phone.
    Only way I can transfer any software is via the obex file transfer method of sending it via a message.
    Now, I dont know if this is due to an upgrade from Microsoft to sp2, as all was working about a month or so ago.
    Bluetooth and usb connections are find and am using the latest drivers.
    Sent an email to Nokia technical and just waiting for a reply..LOL.
    Thanks to anyone who can shed any light on this for me.

    Hi,
    I actually prefer the functionality of manually installing phone apps as you describe instead of using the PC Suite.
    I don't use PC Suite to install .sis or .jar phone applications as it's too buggy to use. Instead, I use BlueTooth to transfer the file manually to the phone...
    - Locate the .sis or .jar file on your PC in Windows Explorer.
    - Right Click the application file.
    - Select, 'Send To', 'BlueTooth Device'.
    - Transfer file to your phone.
    In the phone go to your inbox and select the newly received message. The .sis or .jar application should then install. For me, PC Suite is just too hit and miss to rely on. I used to have a 7650 before getting my current N70 and PC Suite was a bit of a double whammy in that it was not only buggy but when it did work it used to suck resources from the Windows OS quite badly.
    Again, I don't use the phone's built in file browser as it is too limited and hides too many folders, I guess mainly to protect newbies from crippling their smart phone. Instead I use FExplorer V1.15 which is an excellent piece of S60 freeware. The application is available from
    http://www.gosymbian.com/
    and imho is an essential app for any Series 60 smart phone. Be warned though!! If you don't know your way around the system directories and accidently delete the wrong system file you can end up seriously damaging your phone, just like Windows etc.
    Hope that helps!
    S.Message Edited by steve_p on 25-Nov-2005
    02:11 PM
    History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
    Current: Samsung Galaxy Note3 Black

  • Unable to install premiere element with student activation code?

    I bought my student premiere element and photoshop combo pkg in October 2014. When I got home I could not install the program permanently without waiting for Adobe to accept my student ID and provide a serial number to install both. I received it but did not use my paid copy right away. Instead I used the schools. Now I am trying to install it (again, first one I deleted today) but no matter what I do it will  not accept my 16 digit serial number. I have been working on this since 8 pm last night. Adobe would not answer on line. Today I went back to Best Buy they couldn't help me, but tried their best. The Geek Squad guy said I should contact Adobe. I have been waiting on hold for 30 minutes. I NEED TO GET THIS DOWNLOADED FOR A SCHOOL PROJECT. Any advice?

    Marilyns6335817 I am sorry you are facing difficulty locating your serial number.  If it is registered then your serial number will be available under your account at http://www.adobe.com/.  For additional details please see http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    If you have not redeemed your redemption code then please see Redemption Code Help for information on how to redeem the redemption code.  The serial number will be registered to your account as part of the redemption process.

  • Unable to install irssi (problem with PGP)

    I haven't been able to install, and I get this:
    [~]$ sudo pacman -S irssi
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): irssi-0.8.15-5
    Total Installed Size: 2.53 MiB
    Proceed with installation? [Y/n] y
    (1/1) checking package integrity [#################################################################] 100%
    error: irssi: signature from "Evangelos Foutras <[email protected]>" is unknown trust
    error: failed to commit transaction (invalid or corrupted package (PGP signature))
    Errors occurred, no packages were upgraded.
    [~]$

    solar impulse wrote:
    I tried using the MIT keyserver but I still get the same error message.
    I also couldn't find the SigLevel line in /etc/pacman.conf
    In addition to endorsing skunktrader's suggestion, I might add that there has been any number of communications about this upgrade; starting from the message pacman spat out when you upgraded to 4.0 and including (not exhaustively), the mailing lists, these boards, the front page of the website, the IRC topic, etc...
    If you are going to run a rolling release distro, you might want to start paying attention to some of this stuff.

  • Unable to install shuffle 4g with itunes 10.0

    I can't seem to get my new shuffle 4g working with itunes 10.0. my old shuffles work great with 9.2 but had to upgrade to 10.0 for the new 4g shuffle. i keep getting ipodservice.exe failures. Does anyone know if Apple intends to fix this in 10.1? Had to reinstall 9.2 to get itunes back. I am about to send this thing back. This is frustrating and a real disappointment.
    Thanks for any help.

    Sounds like you need to do a clean install of iTunes. Here are the instructions:
    http://support.apple.com/kb/ht1925
    i

  • I purchased acrobat standard but have a mac computer. Received response not available for mac only windows. Unable to install on windows with mac

    Please direct me as to how to install acrobat standard on mac computer. I had trial basis and now my computer is all fouled up and message received that must be installed on windows computer. How do I handle this dilemma.

    If you have Acrobat Standard, it is Windows software. You cannot install Windows software on your Mac.
    If it was purchased, get a refund.
    If it was bundled, then you just can't use it.

Maybe you are looking for