Ultralite 1.15 and Apple Maverick Upgrade problem

Hi, I use an Ultralite 1.15 on an iMac for recording voice over. I was running Snow Leopard but 'upgraded' to Maverick yesterday, and now the mac doesn't recognise the Ultralite in the sound system preferences or in Logic or Garageband. I tried installing new drivers from the Motu site, but the mac says I can't open the updater because "...power PC applications are no longer supported". Am I missing something obvious? Cheers for any help.

Check with the developers to see if they support Mavericks, you are correct Power PC apps are no longer supported. That has been the case since Lion was released a few years ago. You may have to look for another alternative or pay for an upgrade to your current app.

Similar Messages

I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

I bought a mac book pro and apple promised upgradation to lion aosx but yet nothing rcvd , want to ask how much time it takes for them to send me the code to download it (now its more than a week i purchased this mac)

i bought a mac book pro and apple promised upgradation to lion aosx but yet nothing rcvd , want to ask how much time it takes for them to send me the code to download it (now its more than a week i purchased this mac)

http://www.apple.com/macosx/uptodate/

HT4628 How to solve WIFI Maverick Upgrade Problem?

Hi guys, so I have explored all options on the site and forums so far. After my upgrade to Mavericks I cannot find my wifi signal, or very very rarely.
It never stays. Often there are "connection time out errors". There are 2 iphones, 1 ipod, a old Apple powerbook, and Windows7 Machine all connected to the signal, never a problem. Up until my updgrade to Mavericks it also was strong, fast, connected, 500 feet away!
I am 10 feet away from the wifi device. I also have one other signal I do get but it drops continuously and will not stay. Its a very slow connection which I am writing from now. But at least I see that one!
What I have tried to fix this:
Restart
Repair Disk Permissions ( about a thousand times...) -Failed
Force Quit(Hard Reset) -Failed
Reset SMC -Failed
Delete all network settings and keychain info. -Failed
Reset Router -Failed
Diagnostics -Failed
Joined network in "Safemode" and restarted. -Failed
Change channel signals -Failed
This is really causing me productions problems since I earn my income by being online
I have not even done the last big security update because I cannot stay online long enough to get that complete!
Does anyone have any more ideas? I am scared to reset PRAM... the last thing I have not tried (I once tried that with one of my former macs and my logic board died.)
Please advise, I am so frustrated. I just need to work...
Do I ditch Mavericks? Go back to Snow Leopard or maybe it was Tiger...? And if so, how?
All this as my i wifes phone, a powerbook, lenovo windows computer all happily stay connected. My ipod and iphone have no problems even 900 feet away.
My stats... running 10.9.1
Model Name:          MacBook
Model Identifier:          MacBook6,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.26 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB61.00C8.B00
SMC Version (system):          1.51f53
Sudden Motion Sensor:
State:          Enabled

Just an update, when turning off icloud access to the Keychain, my wifi signal appeared and I tried to join it. But had connection time out error.

Photoshop Elements 11 and Apple Mavericks.

Roaring Apps doesn't list Photoshop Elements 11 as compatible with Apple Mavericks. Is it compatible?

Yes, up to a point. It's absolutely essential to delete prferences for any installed version of PSE on upgrading to mavericks. However, there seem to be more problems with PSE 11 than with other versions of PSE. The comic and graphic novel filters will always crash PSE 11 in 10.9, and for some people it runs slow.

IPhone and Apple BT answering problems

Hello,
I have been experiencing problems with the iPhone and the Apple BT headset when answering phone calls. It seems that if a call comes and I try to answer it with the BT unit, a lengthy amount of time goes by until I actually here the phone ringing in the BT. Then the phone shows that the call is active and the ticker starts counting time, but there is no sound. If I pick up the phone and listen to it, there is no sound. When I push the BT button, there is no sound. If I use the phone and select an audio source, again, there is no sound when choosing any of the options, BT, Phone, Speaker. Callers have reported that they hear no sound either. Just a blank line before they hang up. Yes, I know...RESET. And that works...sometimes on the second or third try. Has any one else had this problem or know of a solution? It sounds like a bug...pun intended...

I have the same exact problem, except that for me, that exact things also happens when I am not connected to the bluetooth.
However, I restored my phone and it stopped the problem, but it wasn't until I paired my bluetooth with my car handsfree did the phone started doing the same problem again. Any fixes?

Mavericks upgrade problems

After I upgraded to Pages 5.2 and Numbers 3.2, my printer won't respond. What to do?

Try removing the printer then re-Adding it in Print & Scan preferences. If that doesn't help then see:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Mavericks upgrade problems - download hanging

Seeking help with curious problem. I've been trying, unsuccessfully so far, to upgrade a mac mini to Mavericks from OS 10.7.5 (Mid 2011, 2.7 GHz Core i7, 8 GB RAM). Download starts and proceeds slowly but ultimately stalls at 1.01 GB downloaded or about 20% of the way into the total download size (5.30 GB). I delete the hung download/start of install out of Launchpad and start again at the app store but the process simply repeats - it starts off well but stops at 1.01 GB downloaded. Most vexing.
Thanks for any suggestions,
Zenurgist

the 1.01GB limit is an issue with 2-Wire or BT HomeHub routers. It is either 995Mb or 1.01Gb limits. The workaround is to go somewhere else that doesn't use these routers.

HT201364 Mavericks Upgrade Problems

Hi, Im not sure why i cant upgrade to Mavericks as i think my mac meets the requirements? Im running OS X 10.6.8, have 2gb of memery and plenty of hard drive space. Any suggestions?

Oh nothing major. It's a little slow but overall is fine. I just don't want any problems like some people get when they try and upgrade a 4 yr old computer. What do you think?

After Mavericks upgrade problems with video playback from iPhoto11

Since the upgrade to Mavericks my MBP (13” 2.4GHz 8GB medio 2010) is playing videos opened in iPhoto in poor quality and they are breaking up.
I tried to update to Quicktime 7 (versie 7.6.6 (1709)) and then if I try to "open with" Quicktime 7 from the file which I copied to a different location(desktop) and this is showing fine.
In iPhoto the .mov files are apparently still openend with the old quicktime version (10.3(727.1))
Also I upgraded to iPhoto 11 but still the same problem and tried to do a system check via starting up in safe mode but no go.
Does anybody have an idea?
thanks

You might try the following:
1 - select a video file in the Finder and bring up its Info window (type Commnad + i).
2 - go to the Open With menu and select Quicktime Player 7.6.6.
3 - click on the Change All button.
4 - reboot, relaunch iPhoto and try again.
OT

Maverick upgrade problems

Hey guys i went to go upgrade to OS X Mavericks and I got this message:OS X Mavericks cannot be installed on this computer. I looked and I met all the requirements for the upgrade. What do I do?

OS X v10.6.8 or later
2GB of memory
8GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)

After OS X Maverick upgrade problems...

Hello,
I have recently upgraded my computer to the latest OS X Maverick and I have reinstalled all my Adobe CC programs I am using ( Creative Cloud, Dreamweaver, Photoshop, Lightroom and Edge Animate ). After the upgrade to maverick I have nothing but problems with CC products.
First problem is very annoying white strip of a window that shows up every time I open CC and Edge Animate, it happens sometimes with Photoshop also.
Next and the bigger problem, that actually effects my productivity is in Dreamweaver. When I switch between tabs the letter next to cursor gets underline and the save file is edited by it self. Next problem is that when I copying code from tab to tab the selected code will get sometimes deleted by it self after I paste the code in to other tab and return to the first.
I have none of those problems on my Windows 8.1 computer and I never had such a problems before I upgraded to OS X Maverick on my mac. I hope this can by resolved.
Thanks.

Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
Go to the "root" of any program forum and, in the area just under Ask a Question, type in
maverick
or
mavericks
or
10.9
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Invalid Serial number and RAM memory upgrade problem

1. Please, I am trying to reinstall Snow Leopard, at the end is coming
"Invalid serial number entered Setup requires a valid serial number. The serial number has the format XSVR-106-x-xxx-xxx-xxx-xxx-xxx-xxx-x!
but my serial number is:
C07XXXXXXXXX!
What is wrong?
2. When I try to install 1 DDR Kingston 8GB PC3 10600 CL9 204-PIN SODIMM is coming a clicking sound, What is the problem?
Thanks.

All OS X Server 10.6 purchases include a product serial number key, and this serial number key is a required part of the OS X Server installation. This is a product activation key, and as shown in the display this key begins with XSVR-106 for OS X Server 10.6. This key was included with the paperwork from the original purchase on a couple of stickers on a card, if this system was acquired with OS X Server 10.6. If this OS X Server 10.6 media was acquired from elsewhere, then look for a sticker with the media and packaging. Otherwise, please contact the vendor and ask for the serial number for the media you've acquired. If you've purchased this Mac Mini with OS X Server 10.6 from Apple directly and no longer have the key, then you'll want to contact Apple Support for assistance.
As for your second (memory) question, presumably the memory is not compatible with your particular Mac Mini, or there's a problem with the memory itself. There are usually tech specs available listing the particular requirements for the memory for a particular Mac Mini system. If you purchased this memory from Kingston specifically for this particular system, contact the Kingston support folks and ask for assistance.
If you post the specific model of Mac Mini, somebody here can probably locate the memory requirements.

Corp discount (FAN) customers and Apple Store upgrades?

Last year, for some reason anyone who had a corporate discount (FAN #) on their account could not upgrade at the Apple Store and had to do it through AT&T. I have not heard about any silly restrictions this year. Has anyone heard anything official?

Yes I'm having an issue trying to get a new 3Gs. The Apple store will only sell it at full price. When I called ATT (such dorks) they were an able to remove my FAN the account association which was blocking the purchase at the subsidized price. The apple store called ATT and after a half hour said I would have to try at the ATT store. Why I can't simply remove the FAN discount myself on their site I have no idea.

Mac mini server Mid 2011 Maverick upgrade problem

Help needed I have a mac mini server mid 2011
2x500gb hard drives
Hard Drive one is Macintosh HD
Hard Drive Two is Server HD
I upgraded to mavericks osx onto drive one Macintosh HD
I went to upgrade os x server for mavericks and it went to install on hard drive one Macintosh HD not the Server HD
So I formated both drives which partition map scheme is GUID Partition Table on both drives.
I done a new Install of Mavericks on drive one Macintosh HD that works fine
I downloaded OS X Server again and it is installing on hard drive one Macintosh HD and not Server HD
and it will not give me an option to Install on the Server HD.
I have also looked in the system preferances Startup disk and now I have a question mark showing.
When I open it it only shows Macintosh HD and NOT the Server HD
Can someone please advise
I'm not bad on computers but this has stuped me.
Iif anyone can help please can you explain in easy terms if there is any.
Thank you

Server.app will install on the same disk OS X resides on.
What I think you are seeking here is to have the server data on the other disk, and that is configured via Server.app, once you have Server.app installed. Launch Server.app and select the server name at the top of the left column and then go to the Settings on the right side, and select where you want the service data there.

Ultralite 1.15 and Apple Maverick Upgrade problem

Similar Messages

Maybe you are looking for