Ultranav driver 15.2.20.0 unusable on T510

Hi, after installing ultranav driver 15.2.20.0 update, two finger scrolling became totally unresponsive on my system (T510 i7 Win7 64 Optimus).
It works for the first time, but as I lift my fingers off the pad it looks like I have to wait at least two to three seconds in order to be able to use the feature again. The mouse cursor is unresponsive, shows the arrow and doesn't move.
I had to revert back to 15.2.19.0, which I am happily using as I write this.
Anyone experienced the same issue?

I am having the same issue on my T420S.
There is one more bug I am experiencing. Sometimes after the system resumes from sleep, the ultranav driver does some weird things. For example, if I am trying to scroll with the trackpoint while holding the middle button, the cursor will still move around the screen.
Even if I set the trackpoint stick to only use advanced features, and not act as a mouse, sometimes after resume it still moves around the screen.
The only way to correct this is either to fully log out and back in, or to restart the system.

Similar Messages

  • How can i sync music from my phone onto my new computer without losing it all? my old computer's hard drive crashed so it is unusable.

    how can i sync music from my phone onto my new computer without losing it all? my old computer's hard drive crashed so it is unusable.

    If you do not have a back up of the crashed hard drive you can download an app to copy from the iPhone to iTunes on the new hard drive.
    I have used Pod2Mac.  There is also Pod2PC.
    There are numerous choices, some free, some payed.  Do a Google search.

  • SL300 - Ultranav Driver, EasyEject utility, Presentation Director

    Hi,
    I have problems getting the touchpad to work and quite few other features after installing win7.
    Right now the UltraNav driver wont install, tried both versions:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70340
    http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#unav
    I installed the UltraNav Utility, got no errors on this install:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
    Anyone else having troubles getting the driver to work on a SL300?
    I also cant find a compatible driver for EasyEject and Presentation Director - any tip on where i can find one or when it might be released, would be awesome
    And, I am still worried about the registry patches:
    http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#unav
    Will these work on win 7? Should i install them when they are noted as compatible with vista?
    Thx
    G
    Lenovo Thinkpad SL300
    Original description: T5670(1.8 GHz), 2GB RAM, 160GB 5400rpm HD, 13.3in 1280x800 LCD, Intel X4500HD, CDRW/DVDRW, Intel 802.11agn wireless, Vodafone WWAN, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, Camera, 6c Li-Ion, Win 7 RTM

    Hi,
    I only get a message of:  Install Failed! ThinkPad UltraNav
    And the link about the registry:
    http://www-307.ibm.com/pc/support/site.wss/MIGR-70413.html#inf
    Thanks for looking into this
    Lenovo Thinkpad SL300
    Original description: T5670(1.8 GHz), 2GB RAM, 160GB 5400rpm HD, 13.3in 1280x800 LCD, Intel X4500HD, CDRW/DVDRW, Intel 802.11agn wireless, Vodafone WWAN, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, Camera, 6c Li-Ion, Win 7 RTM

  • 64 bit version of Ultranav driver not available for download

    Using either Update Retriever or System Update, version 7.202.1616.206 of the ThinkPad UltraNav Driver 2 (Alps) 64 bit is missing from the System Update catalogue. Package ID: 6EGY02WW is not presented. Only the 32 bit version (Package ID: 6EGX02WW) is available.
               It can be downloaded and manually installed from the driver matrix, but you would have to realize that there was a more recent version available that System Update had not installed, and go looking for it. This update applies to machine types:
               -        R61 (Machine types: 8914, 8918, 8919, 8920, 8927, 8928, 8929, 8930, 8932, 8933, 8934, 8935, 8936, 8937)
               -        R61i (Machine types: 8918, 8932)
               -        R500
               -        X300, X301
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's
    Solved!
    Go to Solution.

     Hi Stormycloud,
    The problem is resolved. Today, on both of my R500 machines,  Update Retriever informed me that the 64 bit version of the Ultranav utility was available for download. On both of my machines I then downloaded the driver. I was then able to use System Update to install the driver. Thank-you. Case closed.
    Regards,
    Chuck
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

  • T60 - thinkpad ultranav driver is not detected

    Hello,
    From the following link I downloaded and installed the "UltraNav Utility for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP (32-bit, 64-bit) - ThinkPad "
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60...
    My O.S is Windows XP-32
    Upon installation completion I was asked to restart the Laptop.
    But upon windows boot, the mouse pad is not working. Only the red mouse is working .
    I tried <Fn+F8>. It did not make a difference .
    From this link I also installed: UltraNav Wizard for Windows 2000/XP".
    When I ran the wizard I got the message:
    thinkpad ultranav driver is not detected
    In the device manager, under "Mice and other pointing devices", there is only PS/2 mouse.
    Can you help ?
    Thank you in advance,
    Z.V

    @jeet2113 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • How do I prevent the UltraNav driver from automatically installing?

    I have an x230 with Windows 8. As some of you might know, the UltraNav driver on Windows 8 does not allow the middle button to be used for middle-click. As a workaround, I use the Synaptics generic mouse driver, which works just fine.
    However, either Lenovo or Windows (I suspect the latter) persistently tries to reinstall the (evil) UltraNav driver, which kills middle-click functionality. So every once in a while when my system has been rebooted after updates, I find I can't middle click, which means I have to manually uninstall the UltraNav driver, reboot once, install the Synaptics generic driver, reboot again.
    This is a huge hassle, and I'd appreciate any help I can get.
    Solved!
    Go to Solution.

    Actually, Windows Update itself seems to have nothing to do with it. (It took me a while to realize it wasn't working since I rarely shut down my laptop.)
    I have a strong feeling the culprit is here:
    open Devices & Printers. (Type it into the Start Screen and it will be under Settings)
    Right click your laptop's icon and click Device Installation Settings
    Select: No, let me choose what to do; Never install driver software from Windows Update
    Hoping this works, because I seriously depend on the middle click button in AutoCAD. If you're used to opening/closing tabs with it, ctrl + left click works without too much extra effort. 

  • Ultranav Driver 16.2.14.0 needs TWO reboot to function

    I just want to report the following things about the latest Ultranav driver 16.2.14.0:
    1. Thankfully, the non-working middle-click button bug (when set to "None"), is resolved. Previously in the last few drivers it wasn't working properly. It pretty much meant removing the middle button from my laptop, since it was forced to scrolling mode because of some bug and I simply couldn't middle click. I was forced to use driver from Synaptics to fix it. Glad now I can use Lenovo driver!
    2. However there is a bug with this driver, that it needs TWO restarting to function. Upon the first restart, Fn + F8 gives an error, and the TrackPoint sensitivity is always set to hardest, and no matter what you set in this windows session, it will disappear upon the next reboot.
    After the 2nd reboot, it works perfectly. Fn + F8 opens the moust dialog (no utility software installed), and the settings function properly.
    Using a W520

    Hello noochi01,
    I found another "problem" in my first XP installation... some years ago I learned to press F5 during the first WinXP setup screen (where it says "press F6 for storage controller...") in order to manually select "ACPI-PC" as the PC type. Otherwise sometimes the non-ACPI HAL would be installed due to some crappy ACPI BIOSes which results in the "You may now switch off the computer" message instead of power down.
    This manual ACPI-PC selection was what I also did when I first setup XP SP3 on the T61p... now I noticed the machine runs on only one of the 2 CPU cores. Cause is that the selection of "ACPI-PC" will install the uniprocessor XP kernel:-/
    So I now did another clean setup with selecting "ACPI multiprocessor PC" => multiprocessor kernel is installed and both CPU cores are used. With this setup I don't have problems with either the original UltraNav 13.x driver or the Ricoh SD/MMC host controller driver.
    I'm very unsure if the uniprocessor kernel in the first installation caused these driver problems or if I simply installed the drivers in a different sequence this time... but there's no freeze until now.
    Can you check if both CPU cores are active on your machine? E.g. the Windows task manager shows two graphs for CPU usage, two frequencies are shown in System Properties etc.?
    btw: The 3.57.01 Ricoh drivers from the ASUS website seem to work well for the ThinkPads with that Ricoh 4-in-1-controller: http://dlsvr.asus.com/pub/ASUS/nb/Drivers/Cardreader/CardReader_Ricoh_VT_090513.zip
    I don't know why Lenovo did never release that driver update?! On the Ricoh page there are no downloads for "industrial products"... and that controller seems already outdated.
    Cheers,
     Wolfgang

  • UltraNav driver v12.2.3.1 on T60

    T60 Horizontal scrolling no longer work after update to "UltraNav driver for Windows 2000, XP and Vista 32-bit - ThinkPad
    " v12.2.3.1. Please verify and fix the problem.

    anybody know the email address for lenovo technical support?

  • [W520] New UltraNav driver update failure...

    The UltraNav driver 15.3.39.1 in question for my W520: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS019164
    Installing the update results in these two error messages:
    It finally finishes with:
    I've tried uninstalling everything, restarts in between, and everything else. I'm having to roll back to the previous version.
    W520: i7-2960XM, 32GB RAM, Quadro 2000M, Intel 310 SSD, Hitachi 320GB RAID0, 15.6" FHD, Intel 6300 Ultimate-N
    OS: Windows 7 Professional 64-bit with the latest updates and drivers

    I tried installing that driver and it worked for me.  Anyone else having this problem?

  • Installing UltraNav Driver increases boot up time

    I'm using a Thinkpad W520 with Windows 7 and a Crucial M4 256GB SSD (not sure if this is also part of the cause of the problem). Normally the boot up time is between 20 to 25 seconds. However, when I update the UltraNav driver to the latest version, the boot up time is significantly increased to around 50 seconds. And when I use Device Manager to roll back the version of the UltraNav driver to PS/2 Compatible Mouse, the boot up time is normal again.
    My question is: has anyone else also observed this incompatibility issue between UltraNav with (Windows 7 or SSD)? Is there a solution to this problem?
    Solved!
    Go to Solution.

    It sounds like some conflict in drivers somewhere. What if you install the drivers, but uncheck the startup entries in MSCONFIG?
    My boot times have always been fine with the drivers installed.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Lenovo Update of Synaptics UltraNav driver now makes it reset vertical scrolling speed

    After the last update of the Synaptics UltraNav Driver on my W510 to 16.1.1.0 through Lenovo Update it now keeps reseting the Vertical Scrolling speed (the lines per mouse wheel to 1) randomly when pluging/unplugging a mouse or docking/undocking or rebooting the machine.
    This is probably the 5th case of a Lenovo Update that regresses something on the system I've had for the past year and a half...

    ttttrigg3r wrote:
    I can confirm this problem.  It is very annoying to have to reset mouse scroll speed 5-10 times a day because I use my dock very often.  I have found no fix, whether temporary or permanent, to this problem.  I am using driver version 16.1xxxx (the latest "upgrade") and am very annoyed by this problem.  I hope Lenovo techs can help us.
    Have You tried removing the driver and installing an older version? The one that You know worked?
    T60/T618895-W4M, UXGA, T9300, 8GB RAM, Vertex3, Intel 6300 Win8.1
    R61e 7649-W1Z, T7250, Intel 6300

  • UltraNav driver silent install

    according to the readme.txt the ultranav driver should be silent installed using: setup.exe -s -sms
    This seems not to work.....does someone knows what is wrong ?

    Try this in a bat file Start "UltraNav" /WAIT  "PathToProgram\setup.exe" /S -sms
    Good luck

  • "UltraNav Utility" vs "UltraNav Driver" for T400

    I have a T400 and after installing UltraNav Driver x64, I have all the functionalities, Control Panel settings, etc. I wonder what UltraNav Utility is then which appears on my update lists.
    T400 2764CTO, Win 7 Ultimate 64-bit

    Hello,
    it could be that "the UltraNav utility enables the Fn-F8 shortcut when used in conjunction with the ThinkPad Hot Key Utility". Or it may provide "more fluid and comfortable crusor [sic] movement" (Googelberged from notebookreview forum).
    Another possibility could be, that it enables more detailed configuration of the touch pad.
    Greetings Tobias

  • Trackpoint and UltraNav driver

    Hello,
    I am using a ThinkPad T60 with Windows XP SP3 as operating system. On the homepage I found the following different drivers and utilities related to the TrackPoint and theTouchPad:
    TrackPoint Accessibility Driver
    UltraNav Driver
    UltraNav Utility
    UltraNav Wizard
    The TrackPoint Accessibility Driver and the UltraNav Wizard are not updated since 2006, the UltraNav Driver and the UltraNav Utilitywere updated some times (last in 2008). 
    Do I need tto install all of them, or can I ignore some of them (preferably the older ones) without loosing functionnalit?
    Michele

    I have the exact same question, prior to UltraNav driver installation, you can simply Tap-to-click while using the Trackpoint. After installing the driver, you MUST click down on the Clickpad to send a click while using the Trackpoint. This is such a simple software solution that has seriously made me regret my decision to by a newer Thinkpad. The new xx50 series Clickpad is interchangeable with the xx40 series but I am not spending nearly 70$ to solve a simple software problem!
    I recall that back in the days of the X200/X201 there were a decent amount of tips/tricks we could do via the registry to enable "hidden" features of the Synaptics touchpad/trackpoint combo. Is there a similar "hack" we could do to enable the tap-to-click functionality while using the Trackpoint?

  • UltraNav driver

    My touchpad has stopped working.  I have installed the latest driver but it still does not work.  When I try to run any UltraNav applications (like UltraNav Wizard) it says "UltraNav driver is not installed".  Yet when I look in "Add or Remove Programs", it shows up there.  How do I get this to work again?
    Thanks.

    Normally it would not be disabled in BIOS after an update, if you hadn't already disabled it. The default setting is for it to be enabled. You can check it in BIOS by pressing F1 at boot and then navigating to the Config > Keyboard/Mouse menu. If it helps you have a look in the BIOS Simulator first.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for

  • Why can't I connect to any Wi-Fi after updating my iPhone 4S to iOS 8.0.2? Please could someone help?

    HI, After updating my iPhone 4S to iOS 8.0.2 I can't connect to any Wi-Fi connections and it just keeps on searching for Wi-Fi networks. Can someone please help me with how to resolve this problem?

  • How to update batch (LIPS-CHARG) using FM WS_DELIVERY_UPDATE

    Hi guys, I posted a question regarding a function module here: How to update batch (LIPS-CHARG) using FM WS_DELIVERY_UPDATE If you have experience about this FM, kindly visit the link and share your wisdom. Thanks. Regards, Carl

  • Moving checkbox items into other group

    I have a very simple Word doc that when I have Acrobat automatically create a form from it, puts checkbox items into groups I need to change. For example, the grouping should be GroupA Item1 Item2 Item3 Item4 but what I get is GroupA Item1 Item2 Grou

  • Exact positioning of pointers in gradient fills

    I have a gradient fill with 8 pointers. I want them evenly spaced apart. So far I have been eyeballing it. Is there a way to position them at precise points? For example, in the Flash-clone program Corel Rave, it displays a percentage (0 being at the

  • All browsers freeze in Mavericks

    Ever since i've moved from Mountain Lion to Mavericks i'm having major problems with all browsers (Safari, Chrome, Firefox, Chromium). They all freeze for 4-5 seconds, and this happens every 1-2 minutes. This happens on every pages i visit, even on '