UltraSearch Results and normal Search Results

Hello,
i have the following problem:
We crawl documents with the UltraSearch Crawler. For every document exist's a data-set (product name, firm etc.) this data-set is stored in an other table.
If i search for the text in documents i need the data-set for every referenced document to show the complete data (doc url, product name, firm etc.) in a table.
Currently i take the results from UltraSearch, insert them in a temporary table. Then i JOIN the two tables and get the final result. This solution has a performance problem ;-) It need the db operations: select, insert and select.
Did anybody here know a better (faster) solution?
Thanks i advance
Klaus

You need to be a bit more specific about your requirement and your environment. What kind of functionality does your  search need? Are you using enterprise search or FAST?
1) Your sites should already include default search boxes at the top right corner.  If you need a search web part, you will need to create a web part page and add the search box or advanced search box (need a search center for advanced) onto the web
part page. If you need to change the default search box layout on all pages, you can do that by editing the master pages.
2) Are you asking for a specific query to be included in every search? You can can add a default appendded query using the search box web part properties. If you want to just have certain keywords show up at the top, you
can set up Keyword Best Bets. For the filtering, you will need to use scopes. You can set the scope rules to include/exclude specific sites, folders, content sources or property queries. If you're using FAST, you will need to set the scopes
up in the FAST Query app, not the FAST content app.
You can create keyword best bets, scopes and change the search settings for the site collection by going to Root Site Settings > Site Collection Administration > Search Settings. Hope this helps. Again, we need more info to provide a more specific
solution.

Similar Messages

  • Adding Google results to your Search Results possible ?

    Hi I would like to know if and how i can add Google Results to the normal results?
    I found a post that mentioned that SAP delivers a Google Connector/ Repository Manager (RM) but i could not find this RM.
    Or do I have to develop my own Google Repository Manager with the Google API ?
    Any suggestions appreciated and rewarded...
    Thanks,
    Kai

    Hi Kai,
    I think adding Google results to the normal searching results should be possible, but seems not so meaningful. It is because results found by Google may not be relevant to what you want.
    In my view, you may consider to build another iView / page which provides Google searching function. It is much more meaningful and much easier to implement.
    To all: correct me if I am wrong!~~
    Best regards,
    Marcus

  • Appraisal forms and normalizing the results

    Hi everybody,
    What is the SAP best practice(s) for normalizing the result of appraisal forms?
    Imagine you are running an annual appraisal form at the end of year and you would omit 10% lowest and highest results. Or you would apply a normalizing algorithm for appraisal results of a department. and so on.
    Thanks,
    Omid

    Hi;
    You can certainly create a Quiz using FormsCentral but there is nothing built in to "grade" the quiz and no integration with any grading systems like flubaroo.
    You might be able to use "Formulas" on the "View Response" tab to identify correct/incorrect answers. 
    This describes a bit about how to use Formulas (they can be done in a column as well as a row): http://acrobatusers.com/tutorials/how-to-work-with-formulas-in-formscentral
    This is a list of the forumulas available in FormsCentral: http://helpx.adobe.com/acrobat-com/formscentral/help/formula-syntax-built-in-functions.htm l
    Thanks,
    Josh

  • Issue in disabling button and retaining search results of query bean

    Hi,
    I need help in 2 issues
    1) I have a query bean and an advanced table attached to it. I have enabled table actions and put a button inside that. The requirement is the button should be enabled only if a record is present in the advanced table. If for a search parameter, no results are displayed in the advanced table, the button should remain disabled. The moment the results are populated in advanced table the button should be enabled. Please let me know how this can be achieved.
    2) In the advanced table there is a column of type Link. On clicking this link i am forwarding the control to some other OAF page AA. I am retaining AM here. From this new OAF page AA user can move to some other OAF pages B or C. All these pages have different AM. There is a link called return to original page on page AA which takes user back to the search screen. When user goes to page AA and comes back to search screen without going to page B or C the search results are displayed on the page, but when user goes from page AA to page B or C and finally returns to the search screen, the data in search results along with search criteria are lost. The search screen is completely blank.
    I need to display the search results/search criteria no matter what navigation user is doing. Is there a way i can save the search query that got executed on the click of search button. I can re-execute the query when user comes back on search screen.
    Please let me know how to achieve these 2 functionalities.
    Thanks,
    VG
    Edited by: VG on Sep 6, 2011 2:55 PM

    For (1)
    I guess you want to select single/multiple rows after the table is populated in table and perform an action using button.
    If that is the case then do not put button under table actions. Instead put it under multiselection region. Then button only gets displayed when rows are populated.
    If that is not the case then get a handle to button (use findChildRecursive, findIndexedChildRecursive may not work) and disable/enable it.
    For (2).. If you are on r12 below can be useful :- (taken from 12.1 framework guide)
    Using Search Persistence
    In the past, if a user performed a search and then drilled down to a details page, search criteria was lost when
    the user navigated back to the Search page, unless the developer retained the AM or created a custom
    implementation to persist the search criteria. As of Release 12, developers no longer need a custom
    implementation to persist search criteria, as the query region now has an automatic search persistence
    mechanism in place.
    Generally speaking, you should still retain the AM in favor of using the automatic search persistence
    mechanism for performance optimization reasons. However, if retaining the AM presents a scalability issue
    because the underlying view object (VO) had hundreds of attributes, then you should you turn off retainAM and
    allow the query region to automatically handle all the search criteria binding and use the automatic search
    persistence mechanism.
    Note: If you retain the AM state, the automatic search persistence mechanism will not be active. The search
    persistence mechanism is automatic only if the AM state is not retained.
    When a user selects the Go button to initiate a search on the query region, the OAQueryBean automatically
    caches the search criteria on the user session. After the user drills down to the detail page of the Search
    results and then returns to the Search page, the OAQueryBean restores the search criteria from the cache and
    re-executes the query using that saved critieria.
    Note: Since the query is re-executed, any sort, navigation or transient UI state of the results table will not be
    preserved. Saving the entire table state presents high overhead which is what this particular feature is trying to
    avoid.

  • Podcast feed keywords and itunes search results

      my feed is http://jimlockwoodshow.libsyn.com/rss I have a list of 12 keywords in the feed. One keyword is Limbaugh. but, my podcast doesn’t come up as any of the results when searching under Limbaugh. none of my keywords work.                                     

    Hi Jim,
    Per Rogers comments above - when I checked your account there were no keywords entered for the Show (Channel) Level and Episode (Item) Level keywords.
    To enter in the Keywords for the show level - when you log into your libsyn account - click on the gears icon next to your artwork in the upper left.  Then enter your keywords / tags and click save.
    For Keywords for your episodes - you will need to go click Edit for each episode in the episode list and one episode at a time add in the keywords.
    If you put yourself into the "Advanced" editing mode - and then go to "Description" you will see the place for editing the keywords near the lower right.  Click on "Tags / Keyword" and enter you keywords in the box below and then click on Publish when you are done.
    Please note it may take up to a week for the changes to be reflected in search results in iTunes.  And even then search results are sorted based on the all time number of subscribers your show has in iTunes. 
    So to better place yourself in the search results you need to increase the number of subscribers you have via iTunes. 
    Good Luck,
    Rob Walch
    Libsyn

  • Endeca SearchAdjustments cartridge and Dimension Search Results cartridge

    Hi
    In Endeca Discover demo, if search word is 'codac'
    SearchAdjustments adjusts 'codac' to 'codec' (it doesn't adjusts to 'Kodac' )
    Dimension Search Results find 'Kodac' dimension.
    Can anyone explain each logic ? Where can I configure these behavior ?
    Regards

    You can find out details on the logic and configuration options in Chapter Five of the Advanced Developer's Guide here: http://docs.oracle.com/cd/E48636_01/Mdex.6412/pdf/AdvDevGuide.pdf .
    HTH
    Michael

  • Filter search results and create search pages in a intranet site.

    HI
    i created a search service application in a intranet portal.
    and i configured content source as this site.
    and here after i need two things.
    1) how to create a search box in each page of this intranet site
    2) how filter search when any user search it only bring in search results 
    related query item contet, any related files like: words,pdf etc
    not bring list and list items where these files saved.
    this intranet portal is publishing template.
    adil

    You need to be a bit more specific about your requirement and your environment. What kind of functionality does your  search need? Are you using enterprise search or FAST?
    1) Your sites should already include default search boxes at the top right corner.  If you need a search web part, you will need to create a web part page and add the search box or advanced search box (need a search center for advanced) onto the web
    part page. If you need to change the default search box layout on all pages, you can do that by editing the master pages.
    2) Are you asking for a specific query to be included in every search? You can can add a default appendded query using the search box web part properties. If you want to just have certain keywords show up at the top, you
    can set up Keyword Best Bets. For the filtering, you will need to use scopes. You can set the scope rules to include/exclude specific sites, folders, content sources or property queries. If you're using FAST, you will need to set the scopes
    up in the FAST Query app, not the FAST content app.
    You can create keyword best bets, scopes and change the search settings for the site collection by going to Root Site Settings > Site Collection Administration > Search Settings. Hope this helps. Again, we need more info to provide a more specific
    solution.

  • Flickr pages and Google search result pages are smaller

    When I go to a Flickr page or a Google search result page, the entire page is smaller. Content is the same, but the fonts and images are smaller.

    To start with, try pressing holding down Ctrl and then pressing 0 ( Zero). That will reset your zoom if you have zoomed out.

  • I am In Philippines and Google only shows Philippine area results,while Iwant search results from the US

    Google bases search results based on my IP address. I am in the Philippines . Example, I want to find out how much a cell phone in the US is and I get results from India. I want US Results on my searches. How do I change Google to allow this. I am currently in the Philippines but want Search results for the US

    See also:
    * Google.com in English - always '.com': https://addons.mozilla.org/firefox/addon/51000

  • Sorting the Search Result of IndexBased Search Result

    Hi ,
    I am using Index based search to get the result from the Index. I am trying to get the search result with sorting order of modified date.
    I found there is an API to get but I could able to understand How to use that API.
    If any body knows please let me know the solution
    Thanks
    Tatayya M

    No info

  • Waiting for the results and when the results are available show them...

    I have an input page, where the user gives an input. When the user submits this input page, the input is submitted to the server side component which does its processing (which is a time consuming process)....till the results are available i need to show a message that the query is being processed and once the results are available i have to show the results. How do i implement this? How will the page come to know when the query is processed and the results are available? please help..

    j2eeprofessional wrote:
    I have an input page, where the user gives an input. When the user submits this input page, the input is submitted to the server side component which does its processing (which is a time consuming process)....till the results are available i need to show a message that the query is being processed and once the results are available i have to show the results. How do i implement this? How will the page come to know when the query is processed and the results are available? please help..Following is the URL for ajax support.
    [ http://livedemo.exadel.com/richfaces-demo/richfaces/status.jsf?c=status&tab=usage|http://livedemo.exadel.com/richfaces-demo/richfaces/status.jsf?c=status&tab=usage]

  • Old contacts showing up in siri and text search results but not in contacts list.

    So what I did was this. I had mobile me, and iphone ocntacts as well as contacts on phone. After updating to IOS5, i had tripples of almost all my contacts (but not all). I converted my mobile me to icloud to discover i couldnt use that email under my new official icloud accoutn as my @me.com adress. So what i did was this. I deleted my old mobile me (now icloud account) compleatly from my phone, my iPad and my computer so there is no trace of it. I then went to my new iCloud account (that i will now use as my only icloud account. going to let the old mobile me one just die so i have 1 central spot for all my stuff).  Now all my contacts are gone. So to start fresh and just be done with the confusion, i go to www.icloud.com and manually (by hand) re type in all my contacts. I updated some info and changed some names (like nicknames and stuff like that to real names). Basiclly compleatly organizing my contacts and such to the way i want them. Getting rid of poeple i no longer talk to and such.  I did it, it syned and all was well. However now here is hte problem.
    If i go to spotlight search, or text search, or search with siri, or any type of search function, all of my old contacts are still there and viewable. All the ones i wanted to get rid of are all still there. However, if i go to contacts and look for thoes old contacts, they are not in the contact list (yes iv checked every "group" and also "all contacts" in groups).  What i want is to figure out how to get all of these old contacts compleatly deleated so they dont show up anywere on my phone. Especially with siri its making searches and auto calling more difficult because its finding two contacts sometimes that are the same person and asks me to distinguish instead of jsut calling.  CAn anybody help?
    Sorry for the wall of text, wanted to make sure to give as much info on the specifics as possible so hopefully i can get this resolved.  Is this a bug or something i did wrong? can i fix it or do i just have to wait for an update?
    P.S.
    Iv since upgraded to iphone 4S and still happening. Also this does NOT happen on my iPad. Only my iPhone.

    Talked to AppleCare for about an hour. After trying many steps: deleting contacts, re downloading from cloud, disabling Siri and re enabling, even Reset all Settings. Nothing worked. Ended up having to restore the phone via Erase All Content and Settings. That of course fixed it.
    Not sure what the issue was. I did have a Mobile Me account before the iCloud migration. For some reason, my contacts would appear in Contacts on the phone and in the cloud only once, but when using Siri it would list 2 or 3 duplicate contacts. Also after we deleted all the contacts on the phone, did an iPhone reset (Home and On/off buttons), my contacts list would show empty. Then I would click on Groups and poof all of a sudden duplicate or triplicate contacts would be in the contacts list.
    Very strange.

  • I can't open a website that I used to be able to open. I've tried to open it from my favourites bar and from search results. I can open the page from my MacBook.

    I can't open a webpage that I used to be able to open. I've tried to open it from my favorites bar and from a search. I have also entered the address and it still won't open. I can open the site on my iPad. I get a message saying that "Safari can't conect to server".

    Have you tried a different browser such as Firefox? Can you post the url so that we can see if we can open the site?
    Clinton

  • IWeb Portfolios and google search results

    I recently created a website for my business with a selection of portfolios showcasing work I had done.
    On of my clients had noticed that when they google their business one of my folio pages comes up with the following:
    back back. forward forward. back. download · thumbnails on thumbnails on · thumbnails off thumbnails off · play. previous previous. next next...
    I have also noticed that it does the same for another client folio.
    I would really like to change this so that google eventually read something like:
    Branding & design solutions for marketing communications. Is is possible to do within iWeb?

    With iWeb '08 you have the option to publish to a local folder to add tags and upload to MobileMe by drag and drop to Finder/Go/iDisk/My iDisk/Web/Sites.
    By doing this, you do lose some of the functions of iWeb as you will see in the Help files.
    There's a lot of good reasons why you shouldn't rely on MobileMe for a business site but, if you have to use it, you can still get search engine attention.
    You need to follow the steps in the section of iWeb for Musicians that I mentioned above and use your MobileMe URL to allow Google etc to get to your sitemap.
    Its also more or less essential to build your own navigation menu rather than use the default iWeb one.....
    http://www.iwebformusicians.com/WebMusic/Navigation.html
    .... and follow the guidelines to get your site to load on a PC running Internet Explorer .....
    http://www.iwebformusicians.com/WebMusic/iWebandInternetExplorer.html
    ... if you want most of the rest of the world to be able to see your website.

  • Accessing the internet, I can google and get search results but the screen stays dark and doesn't load, accessing the internet, I can google and get search results but the screen stays dark and doesn't load

    what is the problem when the screen goes dark and you cant' access the search items, also i find it strange that I can access you tube but can't access internet thru safari??

    Couple of things you could try : clearing your Safari cache (Settings > Safari > Clear Cache and also try Clear History). You could also try a reset : press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for

  • Want to run an archive and install, but can't empty trash to free space

    I don't know where to begin... at some point recently something caused problems with several applications, so after trying to repair permissions and repair disk with no luck, I decided to archive & install. Now I want the old problems back: Word/Exce

  • Problems with my account. How to setup a new one and copy all data in it?

    I've had this Admin account called 'Alex' since my TiBook days. It was on a freshly installed Panther, but for some reason it had a few problems. Just within my own account, that is. My 'Alex' account happened to be the only Admin account; all the ot

  • Reg: Combining two display lists into one list

    Dear All, i want to combine two display lists into one display list. Please give the idea for this one issue. *****************dispaly list 1 starting here********************* *&      Form  F_006_DISPLAY_LIST *       text *  -->  p1        text *  <

  • Error Occurred During the Posting - Cash Document Posting (DPM)

    Dear Experts, while trying to Post the Cash Documents  from DPM session we got the below message : we have tried to check the application log by pressing on the button in the screen "application log" but we get nothing just the same message that appe

  • Query Perofroamnce Issues

    All are telling for improving performance we have check st04/05 and rsrv? What we have to do here for improving performance? Pl expalain about OLAP Cache also and what are all we can maintain here?