Ultraslow with 10.4.6 and 9.2.2
Still having real problems using appleworks, which takes at least 15 to 30 seconds to allow typing when the coloured-wheel stops rotating
Is my best bet to return to Panther, which gives the choice of OS10 or OS 9.2.2
rather than currently with Tiger where both run at same time ?
Is there a suitable upgrade for Appleworks 6 for OS 10.4.6 ? or do I need to find another programme for my word processing ?
Thanks for comments
PA
It could be that you have too many files in Recent
Items in AppleWorks. First, in the AppleWorks
Preferences>General>Files uncheck Recent Items so no
documents are remembered. Then delete all the files
in Users/Home/Documents/AppleWorks User Data/Recent
Items. Hopefully AppleWorks will speed up.
thank you for the help
shall be testing again
regards PA
Similar Messages
-
Customer/Vendor A/C with line item details and with opening and closing Bal
Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balancesHello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah -
I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.
I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014 -
Corrupted video with Linux 3.8 and i915
Ever since I upgraded my Linux Kernel to 3.8, I've been getting corrupted graphics after booting. I can get past the corruption if I add "nomodeset" kernel option, however this causes X to use a fallback driver instead of the Intel one.
This is the dmesg logs with the default modesetting and corrupted graphics:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad8bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad8c000-0x00000000badd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badd6000-0x00000000badddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000badde000-0x00000000baddefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baddf000-0x00000000bae00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae01000-0x00000000bae01fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae11fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae12000-0x00000000bae1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae20000-0x00000000bae44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae45000-0x00000000bae87fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae88000-0x00000000baffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000e00fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fe407fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H61MGC/H61MGC, BIOS 4.6.4 01/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 43FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbae02 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd80-0x000fcd8f] mapped at [ffff8800000fcd80]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbae01fff]
[ 0.000000] [mem 0x00000000-0xbadfffff] page 2M
[ 0.000000] [mem 0xbae00000-0xbae01fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbae01fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x43fdfffff]
[ 0.000000] [mem 0x100000000-0x43fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x43fdfffff @ [mem 0xbad7e000-0xbad8bfff]
[ 0.000000] RAMDISK: [mem 0x37982000-0x37cb8fff]
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000badd6068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000baddcfe0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000badd6150 06E89 (v02 ALASKA A M I 00000014 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bae17f80 00040
[ 0.000000] ACPI: APIC 00000000baddd0d8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000baddd150 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000baddd258 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000baddd298 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASPT 00000000baddd2d0 00034 (v07 ALASKA PerfTune 01072009 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fdfffff]
[ 0.000000] NODE_DATA [mem 0x43fdfb000-0x43fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbad8bfff]
[ 0.000000] node 0: [mem 0xbae01000-0xbae01fff]
[ 0.000000] node 0: [mem 0x100000000-0x43fdfffff]
[ 0.000000] On node 0 totalpages: 4171547
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 748326 pages, LIFO batch:31
[ 0.000000] Normal zone: 53240 pages used for memmap
[ 0.000000] Normal zone: 3354120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000bad8c000 - 00000000badd6000
[ 0.000000] PM: Registered nosave memory: 00000000badd6000 - 00000000badde000
[ 0.000000] PM: Registered nosave memory: 00000000badde000 - 00000000baddf000
[ 0.000000] PM: Registered nosave memory: 00000000baddf000 - 00000000bae01000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae12000
[ 0.000000] PM: Registered nosave memory: 00000000bae12000 - 00000000bae20000
[ 0.000000] PM: Registered nosave memory: 00000000bae20000 - 00000000bae45000
[ 0.000000] PM: Registered nosave memory: 00000000bae45000 - 00000000bae88000
[ 0.000000] PM: Registered nosave memory: 00000000bae88000 - 00000000bb000000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0100000
[ 0.000000] PM: Registered nosave memory: 00000000e0100000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe408000
[ 0.000000] PM: Registered nosave memory: 00000000fe408000 - 00000000fe800000
[ 0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fea00000
[ 0.000000] PM: Registered nosave memory: 00000000fea00000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
[ 0.000000] PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043fa00000 s85184 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106358
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16342728k/17823744k available (4908k kernel code, 1137556k absent, 343460k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3392.088 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6786.85 BogoMIPS (lpj=11306960)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
[ 0.000680] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003594] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004879] Mount-cache hash table entries: 256
[ 0.004996] Initializing cgroup subsys cpuacct
[ 0.004998] Initializing cgroup subsys memory
[ 0.005003] Initializing cgroup subsys devices
[ 0.005004] Initializing cgroup subsys freezer
[ 0.005005] Initializing cgroup subsys net_cls
[ 0.005006] Initializing cgroup subsys blkio
[ 0.005023] CPU: Physical Processor ID: 0
[ 0.005024] CPU: Processor Core ID: 0
[ 0.005027] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005289] mce: CPU supports 9 MCE banks
[ 0.005298] CPU0: Thermal monitoring enabled (TM1)
[ 0.005305] process: using mwait in idle threads
[ 0.005308] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.005431] Freeing SMP alternatives: 20k freed
[ 0.006105] ACPI: Core revision 20121018
[ 0.007846] ftrace: allocating 19310 entries in 76 pages
[ 0.014700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047607] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.047612] TSC deadline timer enabled
[ 0.047615] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.047619] ... version: 3
[ 0.047620] ... bit width: 48
[ 0.047620] ... generic registers: 8
[ 0.047621] ... value mask: 0000ffffffffffff
[ 0.047622] ... max period: 000000007fffffff
[ 0.047622] ... fixed-purpose events: 3
[ 0.047623] ... event mask: 00000007000000ff
[ 0.084381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.070954] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.124713] Brought up 4 CPUs
[ 0.124716] smpboot: Total of 4 processors activated (27147.40 BogoMIPS)
[ 0.127034] devtmpfs: initialized
[ 0.128242] PM: Registering ACPI NVS region [mem 0xbad8c000-0xbadd5fff] (303104 bytes)
[ 0.128247] PM: Registering ACPI NVS region [mem 0xbadde000-0xbaddefff] (4096 bytes)
[ 0.128248] PM: Registering ACPI NVS region [mem 0xbae12000-0xbae1ffff] (57344 bytes)
[ 0.128249] PM: Registering ACPI NVS region [mem 0xbae45000-0xbae87fff] (274432 bytes)
[ 0.128713] RTC time: 12:28:08, date: 04/21/13
[ 0.128739] NET: Registered protocol family 16
[ 0.128821] ACPI: bus type pci registered
[ 0.128858] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.128860] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.134043] PCI: Using configuration type 1 for base access
[ 0.134456] bio: create slab <bio-0> at 0
[ 0.134491] ACPI: Added _OSI(Module Device)
[ 0.134492] ACPI: Added _OSI(Processor Device)
[ 0.134492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134493] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.135068] ACPI: EC: Look up EC in DSDT
[ 0.135781] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.137166] ACPI: SSDT 00000000bae16c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.137329] ACPI: Dynamic OEM Table Load:
[ 0.137331] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.137344] ACPI: SSDT 00000000bae17e18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.137479] ACPI: Dynamic OEM Table Load:
[ 0.137480] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.137815] ACPI: Interpreter enabled
[ 0.137817] ACPI: (supports S0 S1 S4 S5)
[ 0.137825] ACPI: Using IOAPIC for interrupt routing
[ 0.137957] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.140373] ACPI: No dock devices found.
[ 0.140376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.140460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.140461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140644] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.140660] PCI host bridge to bus 0000:00
[ 0.140662] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.140663] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.140664] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.140666] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.140667] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.140668] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.140669] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.140670] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
[ 0.140676] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.140703] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[ 0.140710] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.140714] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.140717] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.140761] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.140782] pci 0000:00:16.0: reg 10: [mem 0xfe407000-0xfe40700f 64bit]
[ 0.140852] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.140882] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.140901] pci 0000:00:1a.0: reg 10: [mem 0xfe406000-0xfe4063ff]
[ 0.140986] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.141009] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.141022] pci 0000:00:1b.0: reg 10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.141084] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.141106] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.141179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.141202] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.141274] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.141305] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.141327] pci 0000:00:1d.0: reg 10: [mem 0xfe405000-0xfe4053ff]
[ 0.141412] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.141435] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.141547] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
[ 0.141560] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 0.141566] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 0.141573] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 0.141580] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 0.141587] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
[ 0.141594] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
[ 0.141635] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.141648] pci 0000:00:1f.3: reg 10: [mem 0xfe404000-0xfe4040ff 64bit]
[ 0.141666] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.141696] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[ 0.141709] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
[ 0.141716] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
[ 0.141723] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
[ 0.141730] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
[ 0.141737] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
[ 0.141743] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
[ 0.141821] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.141889] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.141908] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.141941] pci 0000:02:00.0: reg 18: [mem 0xe0004000-0xe0004fff 64bit pref]
[ 0.141961] pci 0000:02:00.0: reg 20: [mem 0xe0000000-0xe0003fff 64bit pref]
[ 0.142050] pci 0000:02:00.0: supports D1 D2
[ 0.142051] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147998] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.148003] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.148013] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.148056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.148071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.148131] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.148233] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.148555] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.148580] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.148604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.148627] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.148651] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.148675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.148699] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.148724] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.148771] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.148772] vgaarb: loaded
[ 0.148773] vgaarb: bridge control possible 0000:00:02.0
[ 0.148791] PCI: Using ACPI for IRQ routing
[ 0.150239] PCI: pci_cache_line_size set to 64 bytes
[ 0.150274] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.150275] e820: reserve RAM buffer [mem 0xbad8c000-0xbbffffff]
[ 0.150276] e820: reserve RAM buffer [mem 0xbae02000-0xbbffffff]
[ 0.150277] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
[ 0.150330] NetLabel: Initializing
[ 0.150330] NetLabel: domain hash size = 128
[ 0.150331] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.150338] NetLabel: unlabeled traffic allowed by default
[ 0.150351] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.150354] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.152358] Switching to clocksource hpet
[ 0.154978] pnp: PnP ACPI init
[ 0.154986] ACPI: bus type pnp registered
[ 0.155052] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.155054] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.155055] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.155056] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.155057] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.155060] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155126] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.155127] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 0.155128] system 00:01: [io 0x0a20-0x0a2f] has been reserved
[ 0.155130] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155242] pnp 00:02: [dma 0 disabled]
[ 0.155272] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.155473] pnp 00:03: [dma 0 disabled]
[ 0.155550] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.155556] pnp 00:04: [dma 4]
[ 0.155565] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.155584] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.155595] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.155622] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.155624] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155639] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.155737] system 00:09: [io 0x0400-0x0453] has been reserved
[ 0.155738] system 00:09: [io 0x0458-0x047f] has been reserved
[ 0.155740] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.155741] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.155742] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.155744] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.155745] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.155746] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.155748] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155778] system 00:0a: [io 0x0454-0x0457] has been reserved
[ 0.155779] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.155841] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.155914] pnp: PnP ACPI: found 12 devices
[ 0.155915] ACPI: ACPI bus type pnp unregistered
[ 0.161646] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161657] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.161660] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.161666] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.161686] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.161687] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.161688] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.161689] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.161690] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.161692] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.161693] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
[ 0.161694] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.161695] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.161711] NET: Registered protocol family 2
[ 0.161855] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.162134] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.162257] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.162268] TCP: reno registered
[ 0.162280] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162322] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162389] NET: Registered protocol family 1
[ 0.162397] pci 0000:00:02.0: Boot video device
[ 1.491880] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.821411] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.821534] PCI: CLS 64 bytes, default 64
[ 2.821560] Unpacking initramfs...
[ 2.860148] Freeing initrd memory: 3292k freed
[ 2.860410] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.860412] software IO TLB [mem 0xb6d7e000-0xbad7e000] (64MB) mapped at [ffff8800b6d7e000-ffff8800bad7dfff]
[ 2.860631] audit: initializing netlink socket (disabled)
[ 2.860638] type=2000 audit(1366547290.869:1): initialized
[ 2.869024] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.870168] VFS: Disk quotas dquot_6.5.2
[ 2.870192] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.870287] msgmni has been set to 31925
[ 2.870432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.870451] io scheduler noop registered
[ 2.870452] io scheduler deadline registered
[ 2.870455] io scheduler cfq registered (default)
[ 2.870600] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.870600] vesafb: scrolling: redraw
[ 2.870602] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.871275] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
[ 2.980432] Console: switching to colour frame buffer device 240x67
[ 3.089134] fb0: VESA VGA frame buffer device
[ 3.089141] intel_idle: MWAIT substates: 0x1120
[ 3.089141] intel_idle: v0.4 model 0x3A
[ 3.089142] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.089165] GHES: HEST is not enabled!
[ 3.089198] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.109690] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.109934] Linux agpgart interface v0.103
[ 3.109973] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.110328] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.110343] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.110406] mousedev: PS/2 mouse device common for all mice
[ 3.110446] rtc_cmos 00:05: RTC can wake from S4
[ 3.110549] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.110579] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.110620] cpuidle: using governor ladder
[ 3.110670] cpuidle: using governor menu
[ 3.110671] EFI Variables Facility v0.08 2004-May-17
[ 3.110696] drop_monitor: Initializing network drop monitor service
[ 3.110739] TCP: cubic registered
[ 3.110796] NET: Registered protocol family 10
[ 3.110880] NET: Registered protocol family 17
[ 3.110888] Key type dns_resolver registered
[ 3.111039] PM: Hibernation image not present or could not be loaded.
[ 3.111044] registered taskstats version 1
[ 3.111641] Magic number: 9:762:481
[ 3.111722] rtc_cmos 00:05: setting system clock to 2013-04-21 12:28:11 UTC (1366547291)
[ 3.112698] Freeing unused kernel memory: 820k freed
[ 3.112774] Write protecting the kernel read-only data: 8192k
[ 3.115117] Freeing unused kernel memory: 1224k freed
[ 3.116059] Freeing unused kernel memory: 440k freed
[ 3.120597] systemd-udevd[55]: starting version 201
[ 3.121991] [drm] Initialized drm 1.1.0 20060810
[ 3.122543] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.122548] ACPI: Power Button [PWRB]
[ 3.122604] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.122606] ACPI: Power Button [PWRF]
[ 3.124834] [drm] Memory usable by graphics device = 2048M
[ 3.124837] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 3.124838] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.124847] Console: switching to colour dummy device 80x25
[ 3.124912] i915 0000:00:02.0: setting latency timer to 64
[ 3.147632] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 3.147637] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.147638] [drm] Driver supports precise vblank timestamp query.
[ 3.147660] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.160432] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 3.170403] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 3.223613] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 4.074424] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 4.094365] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 4.094384] tsc: Refined TSC clocksource calibration: 3392.294 MHz
[ 4.094386] Switching to clocksource tsc
[ 4.147630] [drm:init_ring_common] *ERROR* bsd ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 4.147706] [drm:i915_driver_load] *ERROR* failed to init modeset
[ 4.148415] i915: probe of 0000:00:02.0 failed with error -5
[ 4.161263] ACPI: bus type usb registered
[ 4.161317] usbcore: registered new interface driver usbfs
[ 4.161324] usbcore: registered new interface driver hub
[ 4.161413] usbcore: registered new device driver usb
[ 4.161574] SCSI subsystem initialized
[ 4.162262] ACPI: bus type scsi registered
[ 4.162335] libata version 3.00 loaded.
[ 4.162367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.162577] ehci-pci: EHCI PCI platform driver
[ 4.162612] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 4.162615] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 4.162619] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.162631] ehci-pci 0000:00:1a.0: debug port 2
[ 4.166507] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 4.166520] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe406000
[ 4.174224] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.174406] hub 1-0:1.0: USB hub found
[ 4.174411] hub 1-0:1.0: 2 ports detected
[ 4.174488] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 4.174491] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.174494] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.174504] ehci-pci 0000:00:1d.0: debug port 2
[ 4.178376] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.178387] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe405000
[ 4.187519] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.187706] hub 2-0:1.0: USB hub found
[ 4.187709] hub 2-0:1.0: 2 ports detected
[ 4.187805] ata_piix 0000:00:1f.2: version 2.13
[ 4.187823] ata_piix 0000:00:1f.2: MAP [
[ 4.187824] P0 P2 P1 P3 ]
[ 4.340467] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.340720] scsi0 : ata_piix
[ 4.341117] scsi1 : ata_piix
[ 4.341342] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
[ 4.341347] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
[ 4.341360] ata_piix 0000:00:1f.5: MAP [
[ 4.341360] P0 -- P1 -- ]
[ 4.480019] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.493313] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 4.493326] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.493538] scsi2 : ata_piix
[ 4.493885] scsi3 : ata_piix
[ 4.494108] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[ 4.494109] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[ 4.603626] hub 1-1:1.0: USB hub found
[ 4.603699] hub 1-1:1.0: 4 ports detected
[ 4.709364] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.832948] hub 2-1:1.0: USB hub found
[ 4.833043] hub 2-1:1.0: 6 ports detected
[ 4.898989] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 4.999004] usbcore: registered new interface driver usbhid
[ 4.999005] usbhid: USB HID core driver
[ 4.999367] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 4.999427] hid-generic 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 5.002139] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[ 5.002355] hid-generic 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 5.055167] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 5.360826] ata2.00: failed to resume link (SControl 0)
[ 5.424109] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 5.517457] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input4
[ 5.517569] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input0
[ 5.523155] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
[ 5.523390] hid-generic 0003:045E:0745.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input1
[ 5.538878] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/input/input6
[ 5.539104] hid-generic 0003:045E:0745.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input2
[ 5.616931] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 5.679916] ata1.01: failed to resume link (SControl 0)
[ 5.702724] input: Western Digital External HDD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input7
[ 5.702795] hid-generic 0003:1058:0705.0006: input,hidraw5: USB HID v1.10 Device [Western Digital External HDD ] on usb-0000:00:1d.0-1.3/input1
[ 5.703448] Initializing USB Mass Storage driver...
[ 5.703513] scsi4 : usb-storage 2-1.3:1.0
[ 5.703555] usbcore: registered new interface driver usb-storage
[ 5.703556] USB Mass Storage support registered.
[ 5.832877] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.832888] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 5.839930] ata1.00: ATA-8: Hitachi HDS721010CLA330, JP4OA3MA, max UDMA/133
[ 5.839934] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.853220] ata1.00: configured for UDMA/133
[ 5.853398] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 6.381306] ata2.01: failed to resume link (SControl 0)
[ 6.392485] ata2.00: SATA link down (SStatus 4 SControl 0)
[ 6.392498] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 6.393465] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.393486] sd 0:0:0:0: [sda] Write Protect is off
[ 6.393488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.393496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.398867] sda: sda1 sda2
[ 6.399148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.684261] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.704492] scsi 4:0:0:0: Direct-Access WD 5000BEV External 1.75 PQ: 0 ANSI: 4
[ 6.705358] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.706072] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.706077] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.706816] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.706824] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.709057] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.709064] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.709536] sdb: sdb1 sdb2 sdb3
[ 6.712170] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.712177] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.712182] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 7.159102] systemd[1]: systemd 201 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.170787] systemd[1]: Set hostname to <monolith>.
[ 7.649154] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.649194] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.649202] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 7.649209] systemd[1]: Starting Network is Online.
[ 7.649215] systemd[1]: Reached target Network is Online.
[ 7.649220] systemd[1]: Starting mnt-netfs.automount.
[ 7.661823] systemd[1]: Set up automount mnt-netfs.automount.
[ 7.661832] systemd[1]: Starting Remote File Systems.
[ 7.661838] systemd[1]: Reached target Remote File Systems.
[ 7.661843] systemd[1]: Starting Syslog Socket.
[ 7.661864] systemd[1]: Listening on Syslog Socket.
[ 7.661870] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.661885] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.661890] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.661900] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.661904] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.661918] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.661923] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.661934] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.661940] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.661962] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.661980] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.662020] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.662026] systemd[1]: Starting Journal Socket.
[ 7.662050] systemd[1]: Listening on Journal Socket.
[ 7.662059] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.682703] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.686581] systemd[1]: Starting Apply Kernel Variables...
[ 7.690932] systemd[1]: Mounting Debug File System...
[ 7.694343] systemd[1]: Starting Journal Service...
[ 7.700886] systemd[1]: Started Journal Service.
[ 7.712541] systemd[1]: Starting Load Kernel Modules...
[ 7.714248] systemd[1]: Starting Encrypted Volumes.
[ 7.714259] systemd[1]: Reached target Encrypted Volumes.
[ 7.714267] systemd[1]: Starting Setup Virtual Console...
[ 7.730815] systemd[1]: Starting udev Kernel Socket.
[ 7.730835] systemd[1]: Listening on udev Kernel Socket.
[ 7.730869] systemd[1]: Starting udev Control Socket.
[ 7.730884] systemd[1]: Listening on udev Control Socket.
[ 7.730912] systemd[1]: Starting udev Coldplug all Devices...
[ 7.747426] systemd[1]: Starting udev Kernel Device Manager...
[ 7.770676] systemd[1]: Mounting Huge Pages File System...
[ 7.787329] systemd[1]: Starting Swap.
[ 7.787341] systemd[1]: Reached target Swap.
[ 7.787360] systemd[1]: Started File System Check on Root Device.
[ 7.787366] systemd[1]: Mounting Temporary Directory...
[ 7.810621] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.817216] systemd[1]: Expecting device dev-disk-by\x2duuid-e2db39e9\x2d056c\x2d44ed\x2d8d42\x2d1b027e4a0d24.device...
[ 8.023502] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.045846] systemd-udevd[121]: starting version 201
[ 8.151804] loop: module loaded
[ 8.186713] vboxdrv: Found 4 processor cores.
[ 8.186976] vboxdrv: fAsync=0 offMin=0x216 offMax=0x9aea
[ 8.187033] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.187034] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 8.716904] ACPI: Requesting acpi_cpufreq
[ 8.728317] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.767237] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xa
[ 8.853130] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.853132] ACPI: Thermal Zone [THRM] (37 C)
[ 8.929755] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 9.026224] mei 0000:00:16.0: setting latency timer to 64
[ 9.026302] mei 0000:00:16.0: irq 40 for MSI/MSI-X
[ 9.032384] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.032430] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 9.167592] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.167844] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 9.167971] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90005c22000, b8:97:5a:0a:fc:9e, XID 0c900800 IRQ 41
[ 9.167973] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.345693] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xa
[ 9.386088] ppdev: user-space parallel port driver
[ 9.386810] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xa
[ 9.387792] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xa
[ 9.388032] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.469096] media: Linux media interface: v0.10
[ 9.476345] Linux video capture interface: v2.00
[ 9.497387] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
[ 9.510837] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
[ 9.510906] usbcore: registered new interface driver uvcvideo
[ 9.510907] USB Video Class driver (1.1.1)
[ 9.529106] iTCO_vendor_support: vendor-support=0
[ 9.537373] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 9.537428] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.537524] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.544558] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 9.607707] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 9.626188] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.626255] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.626287] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.626319] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.626349] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.336472] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.732413] 4:3:1: cannot set freq 16000 to ep 0x86
[ 10.881026] usbcore: registered new interface driver snd-usb-audio
[ 10.903764] r8169 0000:02:00.0 eth0: link down
[ 10.903796] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.903806] r8169 0000:02:00.0 eth0: link down
[ 11.696715] systemd-logind[297]: Watching system buttons on /dev/input/event1 (Power Button)
[ 11.696774] systemd-logind[297]: Watching system buttons on /dev/input/event0 (Power Button)
[ 12.498819] r8169 0000:02:00.0 eth0: link up
[ 12.498826] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.281485] FS-Cache: Loaded
[ 19.295688] FS-Cache: Netfs 'cifs' registered for caching
[ 19.295798] Key type cifs.spnego registered
[ 19.295811] Key type cifs.idmap registered
[ 74.361879] mtrr: no MTRR for d0000000,3ff0000 found
With modesetting disabled I no longer see " [drm:i915_driver_load] *ERROR* failed to init modeset", but get a new error that the agpgart module cannot be initialized:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad8bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad8c000-0x00000000badd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badd6000-0x00000000badddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000badde000-0x00000000baddefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baddf000-0x00000000bae00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae01000-0x00000000bae01fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae11fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae12000-0x00000000bae1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae20000-0x00000000bae44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae45000-0x00000000bae87fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae88000-0x00000000baffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000e00fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fe407fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H61MGC/H61MGC, BIOS 4.6.4 01/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 43FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbae02 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd80-0x000fcd8f] mapped at [ffff8800000fcd80]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbae01fff]
[ 0.000000] [mem 0x00000000-0xbadfffff] page 2M
[ 0.000000] [mem 0xbae00000-0xbae01fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbae01fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x43fdfffff]
[ 0.000000] [mem 0x100000000-0x43fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x43fdfffff @ [mem 0xbad7e000-0xbad8bfff]
[ 0.000000] RAMDISK: [mem 0x37982000-0x37cb8fff]
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000badd6068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000baddcfe0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000badd6150 06E89 (v02 ALASKA A M I 00000014 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bae17f80 00040
[ 0.000000] ACPI: APIC 00000000baddd0d8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000baddd150 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000baddd258 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000baddd298 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASPT 00000000baddd2d0 00034 (v07 ALASKA PerfTune 01072009 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fdfffff]
[ 0.000000] NODE_DATA [mem 0x43fdfb000-0x43fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbad8bfff]
[ 0.000000] node 0: [mem 0xbae01000-0xbae01fff]
[ 0.000000] node 0: [mem 0x100000000-0x43fdfffff]
[ 0.000000] On node 0 totalpages: 4171547
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 748326 pages, LIFO batch:31
[ 0.000000] Normal zone: 53240 pages used for memmap
[ 0.000000] Normal zone: 3354120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000bad8c000 - 00000000badd6000
[ 0.000000] PM: Registered nosave memory: 00000000badd6000 - 00000000badde000
[ 0.000000] PM: Registered nosave memory: 00000000badde000 - 00000000baddf000
[ 0.000000] PM: Registered nosave memory: 00000000baddf000 - 00000000bae01000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae12000
[ 0.000000] PM: Registered nosave memory: 00000000bae12000 - 00000000bae20000
[ 0.000000] PM: Registered nosave memory: 00000000bae20000 - 00000000bae45000
[ 0.000000] PM: Registered nosave memory: 00000000bae45000 - 00000000bae88000
[ 0.000000] PM: Registered nosave memory: 00000000bae88000 - 00000000bb000000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0100000
[ 0.000000] PM: Registered nosave memory: 00000000e0100000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe408000
[ 0.000000] PM: Registered nosave memory: 00000000fe408000 - 00000000fe800000
[ 0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fea00000
[ 0.000000] PM: Registered nosave memory: 00000000fea00000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
[ 0.000000] PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043fa00000 s85184 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106358
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16342728k/17823744k available (4908k kernel code, 1137556k absent, 343460k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3392.360 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.41 BogoMIPS (lpj=11307866)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
[ 0.000670] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003579] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004861] Mount-cache hash table entries: 256
[ 0.004978] Initializing cgroup subsys cpuacct
[ 0.004980] Initializing cgroup subsys memory
[ 0.004985] Initializing cgroup subsys devices
[ 0.004986] Initializing cgroup subsys freezer
[ 0.004987] Initializing cgroup subsys net_cls
[ 0.004988] Initializing cgroup subsys blkio
[ 0.005004] CPU: Physical Processor ID: 0
[ 0.005005] CPU: Processor Core ID: 0
[ 0.005009] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005270] mce: CPU supports 9 MCE banks
[ 0.005280] CPU0: Thermal monitoring enabled (TM1)
[ 0.005287] process: using mwait in idle threads
[ 0.005289] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.005412] Freeing SMP alternatives: 20k freed
[ 0.006082] ACPI: Core revision 20121018
[ 0.007828] ftrace: allocating 19310 entries in 76 pages
[ 0.014664] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047574] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.047580] TSC deadline timer enabled
[ 0.047582] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.047586] ... version: 3
[ 0.047586] ... bit width: 48
[ 0.047587] ... generic registers: 8
[ 0.047588] ... value mask: 0000ffffffffffff
[ 0.047588] ... max period: 000000007fffffff
[ 0.047589] ... fixed-purpose events: 3
[ 0.047590] ... event mask: 00000007000000ff
[ 0.087678] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.074249] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.128013] Brought up 4 CPUs
[ 0.128016] smpboot: Total of 4 processors activated (27149.66 BogoMIPS)
[ 0.130345] devtmpfs: initialized
[ 0.131553] PM: Registering ACPI NVS region [mem 0xbad8c000-0xbadd5fff] (303104 bytes)
[ 0.131558] PM: Registering ACPI NVS region [mem 0xbadde000-0xbaddefff] (4096 bytes)
[ 0.131559] PM: Registering ACPI NVS region [mem 0xbae12000-0xbae1ffff] (57344 bytes)
[ 0.131560] PM: Registering ACPI NVS region [mem 0xbae45000-0xbae87fff] (274432 bytes)
[ 0.132024] RTC time: 13:15:37, date: 04/21/13
[ 0.132050] NET: Registered protocol family 16
[ 0.132136] ACPI: bus type pci registered
[ 0.132173] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.132175] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.137361] PCI: Using configuration type 1 for base access
[ 0.137775] bio: create slab <bio-0> at 0
[ 0.137809] ACPI: Added _OSI(Module Device)
[ 0.137810] ACPI: Added _OSI(Processor Device)
[ 0.137811] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137811] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138385] ACPI: EC: Look up EC in DSDT
[ 0.139103] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.140495] ACPI: SSDT 00000000bae16c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.140660] ACPI: Dynamic OEM Table Load:
[ 0.140662]Meanwhile, I encountered it seems to be a problem of the gdm in conjunction with the gpu and the intel driver - once again :-(
Look at this thread: https://bbs.archlinux.org/viewtopic.php?id=161964
Actually, I can start my DE (Gnome 3.8) manually with the following workaround:
First, I disable gdm on my machine
# systemctl disable gdm
After bootin the machine, I'm logging in into the console
$ startx
stopping the X system again
$ sudo systemctl start gdm
logging in into the Gnome Shell.
I need to start the X server first manually. Otherwise the gdm will hang again.
Last edited by thesofty (2013-04-24 21:12:10) -
I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.
It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to. -
HD needs repair but only get a looping Restart with a Leopard DVD and USBHD
Ok here are my specs
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB51.0073.B06
SMC Version (system): 1.32f8
Ok so here is a quick a dirty break down.
Computer has been acting Programs freezing and CPU slowing down.
I ran Verify Disk in Disk Utilities and it said I need to repair Disk.
After a day of head aches I am finally asking for help.
So here is the problem on my old powerbook pro I could just load in Target Mode and repair with tech tool or disk warrior but alas my macbook has no firewire.
So just incase of emergancy's I have a thumbdrive with a live 10.5.3 and all my disk utilities. I've used it on my wifes older Intel Macbook Pro 17" and it works fine.
Today though when i restart hold down the option key "alt" and select the drive my macbook restarts acts like its going to load and the restarts again. This restart loop will go on as long as I let it.
Ok so usb drives can be problematic. Surely starting to the OS X Retail DVD with 10.5.4 and running disk utilities will work. Nope still get the endless restart loop when I've loaded the install dvd and restart with command "c" as well I get the same response if I select it after holding the option key.
Now my hard drive won't even start up either unless I boot in single user mode.
I am lost.
HELP Please.Have you tried booting into safeboot (safemode)? You may want to try resetting your PRAM and or SMC. Another thing you might try is to plug the thumbdrive in the other USB port.
If you could get an external USB drive with osx on it you could try booting from it.
Apple sure did screw up not putting firewire on that Macbook, my wife has one and I just can't get over it. Sure can make it hard to troubleshoot. -
I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!
There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing! -
I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
I used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?
If you still have your serial number, look at OLDER previous versions http://www.adobe.com/downloads/other-downloads.html
Otherwise, the US$ 9.99 plan is what is current at Cloud Plans https://creative.adobe.com/plans -
OEPE 12.1.2.1 with Eclipse (Kepler) M2E and M2E-WTP and Seam 2 problem
I've a JEE project with Maven 3.0.5 and JBoss Seam 2.3. I've some problems in Weblogic 12.1.2 application deployments with Eclipse.
If I deploy the application as virtual application (split_src and .beabuild.txt), the .beabuild.txt includes the directories:
C\:/FundeWeb/2.0/workspace/fundeweb2/web/target/m2e-wtp/web-resources = web_fundeweb2 (m2e-wtp project generated resources)
C\:/FundeWeb/2.0/workspace/fundeweb2/web/src/main/webapp = web_fundeweb2 (project web resources)
That's produces the next error (Multiple WEB-INF/ejb-jar.xml found):
<01-ago-2013 14H07' CEST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1375358874432" for task "1". Error is: "weblogic.application.ModuleException: Multiple WEB-INF/ejb-jar.xml found. [weblogic.servlet.internal.WarSource@19d4f67, weblogic.servlet.internal.WarSource@c7fd40]"
weblogic.application.ModuleException: Multiple WEB-INF/ejb-jar.xml found. [weblogic.servlet.internal.WarSource@19d4f67, weblogic.servlet.internal.WarSource@c7fd40]
at weblogic.ejb.container.deployer.EjbModuleExtensionFactory.create(EjbModuleExtensionFactory.java:26)
at weblogic.application.internal.ExtensibleModuleWrapper.createModuleExtensions(ExtensibleModuleWrapper.java:264)
at weblogic.application.internal.ExtensibleModuleWrapper.initDrivenObjectArray(ExtensibleModuleWrapper.java:232)
at weblogic.application.internal.ExtensibleModuleWrapper.prepare(ExtensibleModuleWrapper.java:107)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)
Truncated. see log file for complete stacktrace
If I deploy the aplication in Weblogic Console with the split_src, with only the web/target/m2e-wtp/web-resources, the applications deploy succesfully.
If I deploy de application as exploded archive, the jboss-seam.jar file isn't included in the WEB-INF/lib folder. The others jboss-seam-xxxx.jar files are included.
In the virtual application deployments, I think that the OEPE integration with M2E and M2E-WTP, there are include only the m2e-wtp folders.Hi Subash,
I tried the same installer on a 32bit machine and was able to run without any issues.
I did however come across a few users jdeveloper users who had similar issues with the jdev installer and the following workaround seems to have solved the issue for them. coudl you try the same and let us know if that helped ?
1. Extract "oepe-12.1.2.1-kepler-installer-win32.exe" file into C:\oepe-12.1.2.1-kepler-installer-win32
2. In cmd go to C:\oepe-12.1.2.1-kepler-installer-win32
3. Execute follow command:
C:\PROGRA~1\Java\jdk1.6.0_31\bin\java.exe ( path to your JDK) -jar install/modules/ora-launcher.jar DISKCNT=1 JRE_COMPONENT=oracle.jdk,oracle.jre
thanks
Raj -
I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".
Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden -
Help with opening Adobe Reader and downloading updates
I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
So I went to the Adobe download site to download a new copy of Adobe. When I start the download I get this on the screen: The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068." The memory could not be written. Then two options are listed: click OK to terminate or cancel to debug. So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer. A malfunctioning or malicious addon has caused I.E. to close this webpage.
I don't have AVG running, I do have avast but I've disabled it. I ran Registry Mechanic and an I.E. erasure program but nothing helps.
I have gone into I.E. and reduced the security level to its lowest state but no joy.
So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated. Thanks, in advance, for your reply. Jim R.Hi Mike..tried that as well but no joy. A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item."
Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief.
It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C. no joy.
Sigh...Jim R.
Jim R.
Date: Tue, 1 Dec 2009 14:50:27 -0700
From: [email protected]
To: [email protected]
Subject: Help with opening Adobe Reader and downloading updates
Under the help menu, there is an option to repair the installation of reader. Did you try that?
> -
My fiance logged into my iphone with his apple ID and now I can't switch it back to my username. When I go to buy an app his username is in an editable format to beable to change it back to mine. How can I change it back to mine? (when I go to setting,icloud my un/pw are there) Can someone please help? Thanks!
Had you looked in the User Guide, you would have found this: Settings>Store. Tap on AppleID to change.
-
I have an imac and am using iphoto. Currently I am having a problem with one particular album which shows in the main part of the window a triangle with an exclamation point. The two photos are at the bottom of the main window in the same area where the "info" "edit" "create" area is. I can see the two photos but I can not get them back into the main part of the window. I can't drag them anywhere either. I can't double click or right click on either of the two photos either. All I can do is click on either one and they get a little bigger. Before I saw the exclamation point in the main body of the window all I get is two squares with nothing in them and the entire border is made up of dashes. Can someone help me?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Screenshot is for iPhoto 9
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to do with text messages anyway?
You need to remove your phone number from the iMessage system.
Read here: http://support.apple.com/kb/ts5185
~Lyssa
Maybe you are looking for
-
I would like to access the one that I no longer have a functioning email address for.
-
CS4 Design standard Silent Install: Start Menu Items
Greetings! I've got everything working for a silent install of CS4 (Design Standard). However, there seems to be an issue with creating the Start Menu Folders. My first try, I asked for all the shortcuts to be placed in a folder called "AdobeCS4."
-
Hi, While posting a check lot through FP25, Posting is happening but postprocessing is required..When i check the status ,it says "No selection category defined for business partner". Has it something to do with Contract A/R & A/P -> Basic Functio
-
so i just got my ipod brand new yesterday. i came home and put songs on it and what not. but when i tried to put a video i guess it was uploaded/converted but when i went to watch it on my iPod. it played but no sound. anyone know how to resolve this
-
I can't update my iPod 5g to iOS 6.1.3
Whenever I try to update my iPod touch 5g to iOS 6.1.3, first the installer takes an hour to download (but that's not the problem), then as soon as it finishes downloading, it says that there was some kind of unknown error - my iPod is now stuck in a