UltraSPARC I processors are not supported by this release of Solaris.

I'm getting this message when trying to install Solaris 10 on my Ultra Enterprise 2. My buddy that gave it to me has the same exact system and had no problems installing Solaris 10. Maybe he has UltraSPARC II? Can I upgrade to UltraSPARC II? Will Solaris 9 work with my system till I upgrade? Or do I have to go back as far as 7 and if so, where do I download 7? Thank you in advance.

The Ultra-2 is indeed a compatible platform for Solaris 10
but only for the faster SPARC-II cpu modules.
Your model computer could use UltraSPARC
and it could use UltraSPARC-II cpus.
They actually were a slightly different design.
What cpu's do you have? CPU speed is ... ???
The 167MHz and 200MHz modules were not US-II components.
http://sunsolve.sun.com/handbook_pub/Systems/U2/components.html#CPUModule
However the 300MHz and 400MHz Ultra-2 cpus were SPARC-II components.
Lastly, the Solaris 10 Release Notes (817-0552) mention that your systemboard
needs to be at an OBP version of 3.11.2 or newer.
If it isn't there yet, you'll need to flash-update your board, as well,
before you think about Solaris 10.
So ...
If you can't run Sol-10, put any older version on it. ( 2.5.1 through 9 )
http://sunsolve.sun.com/handbook_pub/Systems/U2/U2.html

Similar Messages

Popup Message: "In app payments are not supported in this version of android"

I am a DroidX2 user on Android 2.2.2.
I get this error message:
"In app payments are not supported in this version of android"
occasionally when I'm using apps like Wikipedia, games, and even the browser. I'm not trying to buy anything when using hese apps.
This started happening about a few days ago. What's up with this and should I be concerned?

KEGong wrote:
I am a DroidX2 user on Android 2.2.2.
I get this error message:
"In app payments are not supported in this version of android"
occasionally when I'm using apps like Wikipedia, games, and even the browser. I'm not trying to buy anything when using hese apps.
This started happening about a few days ago. What's up with this and should I be concerned?
Which games do you have downloaded? I have ran across a couple of games that have in app purchases to get to higher levels. Those games are no longer on my phone and will never be on my phone longer than I can delete them when I discover that situation.
What apps have you downloaded just before this started. I would look at them first.
Did you get any apps outside of the market?
Do you have side loading turned on? That would be the setting under Applications that allow you to install apps not from the market.
I would be concerned personally. I do not have the Wiki app, but take a hard look at everything. If they have something in there that you have to pay for to get more levels in app, I would delete them.
As a last resort, I would do a factory reset (which wipes everything out internally, but leaves the SD Card alone). Then start from scratch, adding each game/app that you had before, but do them slowly and wait a day or two before doing the next one. If you get that message back after adding an app, delete the app and do not download it again. If you have any apps that you have moved to the SD card, I would move them back before the factory reset so they get deleted too.
I know that this can be a slow process, but that is better than having a rogue app buying stuff from your phone without you knowing about it.

ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture.

Hi,
I face a ERROR:MapLib:973 problem with inout port in a pcore component.
I need ton instantiate an inout port at the top level to communicate wih my peripherical.
This inout port is driven by an XPS IP core (pcore).
The .mpd is :
PORT fdata = "", DIR = INOUT , VEC = [31:0], ENABLE=SINGLE, THREE_STATE = TRUE,TRI_I = fdata_I, TRI_O = fdata_O, TRI_T = fdata_T
PORT fdata_I = "", DIR = I , VEC = [31:0]
PORT fdata_O = "", DIR = O , VEC = [31:0]
PORT fdata_T = "", DIR = O
The .vhd is :
fdata_o : out std_logic_vector(31 downto 0);
fdata_i : in std_logic_vector(31 downto 0);
fdata_t : out std_logic ;
I got ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture messages for each
signals of my fdata PORT, while mapping !
Thanks for you help.

What device are you targeting, and what version of the software are you using?
I target a xc7k325t-fbg676-2.
I use ISE 14.3 form platgen to xst and 14.7 from map to bitgen.
What does your top level HDL (verilog or VHDL) file look like (where the IO must be instantiated)?
It is a .vhd in whitch i wrapp my top XPS core, described by .mhs
The problematic IO port is instantiated into the mb_core.vhd (generated by XPS).
If i open it, i could see that the tool correctly infer the corresponding IOBUF's :
component mapping :
fdata_I => FX3_DQ_I,
fdata_O => FX3_DQ_O,
fdata_T => FX3_DQ_T,
One IOBUF infered:
iobuf_1 : IOBUF
port map (
I => FX3_DQ_O(31),
IO => FX3_DQ(31),
O => FX3_DQ_I(31),
T => FX3_DQ_T
Top level port :
FX3_DQ : inout std_logic_vector(31 downto 0);
THEN FX3_DQ signal is dirrectly branched in my upper level (top level) vhd file, with the same name.
What do your constraints file look like (where the pin number and names get declared)?
The port is only constrained in .ucf, like that:
NET FX3_DQ[0] LOC = "B24"| IOSTANDARD = LVCMOS33 ;
NET FX3_DQ[31] LOC = "G26"| IOSTANDARD = LVCMOS33 ;#Bank 14

IOS AIR3.6 runtime error 3747 Multiple application domains are not supported on this operating syst

3747
Multiple application domains are not supported on this operating system.
I'm getting this error from an IOS app compiled with air 3.6.
No code has changed from Air 3.5 which is error free. Web app / android versions of the same codebase do not error.
See the stackTrace below ( well done Adobe for providing this since air 3.5 !! )
I use swfloaders for loading embedded swf vector art graphics. This has not caused any issue until now. Should I load all art into the main app's application domain ?
The error does not crash the app and I could suppress it easily but is could the tip of the iceberg because application domains are scary stuff.
Error: Error #3747
        at flash.display::Loader/loadBytes()
        at mx.core::MovieClipLoaderAsset()
        at mx.controls::SWFLoader/loadContent()
        at mx.controls::SWFLoader/load()
        at mx.controls::SWFLoader/initializeHandler()
        at flash.events::EventDispatcher/dispatchEvent()
        at mx.core::UIComponent/dispatchEvent()
        at mx.core::UIComponent/set processedDescriptors()
        at mx.core::UIComponent/initialize()
        at com.komodomath.app::ImageSWFloader/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/setMXMLContent()
        at spark.components::Group/set mxmlContent()
        at spark.components::SkinnableContainer/set mxmlContent()
        at spark.components::SkinnableContainer/createDeferredContent()
        at spark.components::SkinnableContainer/createContentIfNeeded()
        at spark.components::SkinnableContainer/createChildren()
        at mx.core::UIComponent/initialize()
        at com.komodomath.lesson::SaveStatusCheck/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/addElementAt()
        at mx.states::AddItems/addItemsToContentHolder()
        at mx.states::AddItems/apply()
        at mx.core::UIComponent/applyState()
        at mx.core::UIComponent/commitCurrentState()
        at mx.core::UIComponent/setCurrentState()
        at mx.core::UIComponent/set currentState()
        at com.komodomath.maingroups::LessonGroup/handleNewLessonClick()
        at com.komodomath.maingroups::LessonGroup/___LessonGroup_KButton1_click_lessonOver()

same issue as http://forums.adobe.com/message/4736711

DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.

Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments

Problems with DHTML popup: Required DHTML functions are not supported in this browser.

When I try to open a Date calendar I receive this message:
Required DHTML functions are not supported in this browser.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Failed to export the report \n Crosstabs and OLAP grids are not supported in this export format

Post Author: ajaymoudgil
CA Forum: Other
We are using Crystal Reports (Product Version: 11.0.0.1282). We encountered with a problem while we are going to export report in CSV (Separated Text). The report Contained Cross-Tab. Its Shows the Error Message u201CFailed to export the report \n Crosstabs and OLAP grids are not supported in this export formatu201D. Please find the attachment with this mail having screen shot for the same.
We were able to export CSV (Separated Text) Format in Crystal Report Version 7 for the same report. Please let us know any way(s) so that we will successfully export the report in CSV (Separated Text) format in Crystal Reports version 11.
Thanks,
Ajay Sharma

Hi Ludek ,
Thanks for reply,
I download CR2008 Redistribale & Installed it.
But still I am getting following error on client PC;
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
Please give solution.
Thanks

Microsoft health "notifications are not supported in this version of windows phone"

Adding some tiles to my Band shows the 'Notifications are not supported in this version of Windows Phone' error.
The affected tiles include calls, mail, Facebook, Cortana and Facebook messenger. My Lumia 630 is running on the version 8.10.14234.375 of WP8.1 Preview for Developers. Microsoft Health is Version 1.3.10424.1. Microsoft Health is allowed to run
in Background.

Never mind. It's actually working now.
The health app wasn't presenting me with a request to access notifications. Strangely on the 4th or 5th time opening the app it did.

Microsoft Band adding some tiles using Health app displays "Notifications are not supported in this version of Windows Phone"

Adding some tiles to my Band shows the 'Notifications are not supported in this version of Windows Phone' error.
The affected tiles include calls, mail, Facebook, Cortana and Facebook messenger. My Lumia 1520 is running on the latest version of WP8.1 Preview for Developers. Why is this the case?

Never mind. It's actually working now.
The health app wasn't presenting me with a request to access notifications. Strangely on the 4th or 5th time opening the app it did.

Unable to open web. Frontpage Server Extensions are not supported in this version of Visual Studio (2013)

Using new install of VS 2013 with Update 1, attempts to open two different VS2010 projects on remote dev server fail with same message.

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because this issue occurred with two VS2010 ASP.NET Web Application, in order to resolve your issue as soon as possible, ASP.NET forum is a better forum:
http://forums.asp.net/
. Please open a new thread on ASP.NET forum like this thread:
http://forums.asp.net/t/1896168.aspx?+The+Web+server+does+not+appear+to+have+FrontPage+Server+Extensions+installed+
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

P4M890M Intial bootup giving me error message "Bus Processor is not supported"

Barebones Desktop Specs;
P4 631 3Ghz HT 2M 800FSB Sock 775 w/Masscool 8W0141B 3.6Gz Cooling Fan
MSI P4M890M-L Socket 775 MB w/ 450 watt power - MSI Case w/Extra Cooling
Hitachi 250GB EIDE HD w/ HD Cooler
XFX GeForce 6200 Turbo Cache 256MB PCIe
2 - Ultra 512 PC4200 DDR2 533Mhz
NEC AD-7170 18X DVD/CD RW
Samsung CD 52x
Utra 3.5 Floppy Drive w/ All-In-One USB2.0 Reader
USB2.0/1394 8pt PCI Card/Comb
XP Pro SP2
Trend Micro 07 Internet Security Suite
PLEASE HELP!! I just purchased this Barebone Computer Kit from Tiger Direct to replace my wife's laptop which is dying. I finally have all the parts to assemble it and start it up. When I purchased the kit "Online" it was sold as a "All Systems Tested and Fully Compatable System".
I was having problems cold booting this computer for the first time. I have now resolved that issue and found the source of the problem in the bootup process itself. Evidently all is not well and fully tested and compatable as Tiger Direct says it is. As the computer boots up for the very first time, you have only 3-4 minutes to tell it weather or not to proceede with installing the following message. I have taken the time to copy the message exactly as it is displayed on my computer screen. I of course will be calling Tiger Direct's Tech Support Line. I have found them to be only as good as the person who answers the phone. Being I'm green anyhow and won't know weather or not I'm being feed a line of BS or not, I thought I'd get some other opinions from folks who understand Computers far better than I. I'm simply firefighter who is trying to buy his wife a decent computer without spending an arm and a leg. In fact I thought this thing would arrive already assembeld and all I needed to do was add an OS and some extras, like a decent video card. I never intended to build this thing from scratch, I could have purchased a simular spec'd Gateway complete with OS preinstalled with a warrenty for less money!!! I'm Not Happy and Not a Techie!! But looking on the bright side, I sure am learning a lot about computers! If I can get it to work without too many more problems I will be very happy.
When the computer first boots, here is the message that appears on the screen;
AMIBIOS C 2005 American Megatrends Inc
BIOs Date 8/25/06 24:17:51 Ver A7255VMS V1.0
Intel Pentium 4 CPU 3.00GHz Speed 266x12 =3200
Hyper Threading Enabled
DDR2 Speed 533MZ
A 200 MHz System Bus Processor is Installed
This Processor Is Not Supported On This Board And Will Run At A Reduced Processor Clock Speed. System Performance Will Be Impacted.
Do You Wish To Continue To Boot @ 266MHz
System Bus And Reduce Processor Speed (Y/N)
Press (Y) To Continue (N) to Shut Down
If I press the Y the computer will run and not shut off in 3 minutes. I let it run last night to see what would happen?? Would it burst into flames?? Would it shut down?? Well after a hour it shut down. Is that normal? Is it some kind of saftey mechinism?
It will start right up again, but it was almost 5am so I shut er down and went to bed. I'm waiting for some advice before I move forward from here. Please respond ASAP! I'd like to get this thing done so I can move on to the next 'Honey Do' project.
This is my first computer I have ever built so I am green to all this. I dont really understand what all this means and what kind of an impact will this have on my new computer??
1. What does this mean, my CPU is not compataible to this board?
2. If I keep it and install it, will it cause the computer to be unstable latter on?
3. How much of a negitive impact will this have on my computer?
4. How much will it slow it down?
5. What would you do if you were in my shoes? Replace the CPU for the right one or upgrade to a better one or keep it??
6. If I do upgrade, what would be a better choice and not break the bank??

:no-idea: Thanks Dry Heat,
I went to the link that you provided. Here is the latest problem...... I can get the computer to run longer than 3 minutes by pressing the Y key when asked during the initial boot-up. After that the computer will not move off that window I described in my 1st post, no matter what I do. I tried restarting the computer and pressed the Delete key to see if that would work and the F1 and F2 keys during the initial boot up, the Bios Window would appear but the computer would shut down, there was nothing I could do to get past this, let alone go on-line to download something. How would I get on-line without an operating system to update the Bios? Remember I am Green and have no idea what the heck I'm doing, let alone what is the real problem here. Its like fighting fire blindfolded! Please help and be detailed on how I should procede. Thanks! Woody

Cluster in a box with Guest LDOMs : SCSI-3 reservations are not supported

Hello,
I recently installed the Oracle Solaris Cluster 4.1 in two simple Guest LDOMs (OVM for SPARC 3.1) with one T5140 server and SE 7110 as a shared storage. The some SE 7110 whole LUNs mapped as VDS devices to both LDOMs. After initial installation of Oracle Solaris Cluster 4.1 I observed issues with quorum device - both nodes cannot get SCSI3 (default) persistent reservation keys information at same time - only one node can be able to scrub. After switching cluster's global fencing option to "nofencing" (with "software" quorum implementation) both nodes can access quorum device successfully. So I can conclude that SCSI3 PGRs are not supported in this cases.
Unfortunately I didn't find any official and nonofficial documents info regarding this limitation. Could you please confirm or decline my suggestion.
Thanks.

I am answering on my question by itself
Planning the Oracle Solaris OS - Oracle Solaris Cluster Software Installation Guide
Fencing – Do not export a storage LUN to more than one guest domain on the same physical machine unless you also disable fencing for that device. Otherwise, if two different guest domains on the same machine both are visible to a device, the device will be fenced whenever one of the guest domains halts. The fencing of the device will panic any other guest domain that subsequently tries to access the device.
RTFM...

Another Premiere Elements 10 " processor is not supported" error message

I have the combination DVD, with Photoshop & Premiere Elements 10 bought just a few months ago. It came bundled with a digital camera.
Elements 10 will not instal because "the processor is not supported with this package"
My PC has a Pentium 4, 3Ghz proc, 2Gb ram and runs XP Pro SP3. which as far as I can tell meets the requirements. Idid see that a dual core Proc. is required to edit HD and AVH?? but my interst is only still in DV and I've assumed that the dual core is not therefore required.
I spent hours researching the problem yesterday and saw a solution to " follow PE 11 trial download route and choose PS 10" but no such option exists now. (presumably to get a version that would get around this)
Is there a solution to this please ?

A Pentium 4 is definitely able to run the program, box. It's just not going to run it very well -- particularly if you've only got 2 gigs of RAM and a video card with less than 1 gig of memory. You may be able to get by if your processor is a Hyper Threading Pentium.
You also should have 100 or so gigs of free space on your hard drive. (The best rule of thumb is to take Adobe's recommended minimums and double them -- and that's the MINIMUM power you should have.)
So I'm not sure why you're getting that message.
Have you manually gone to Windows Update and downloaded all of the non-critical updates? They often include important drivers and patches that don't download automatically.
If downloading those updates don't do it, I'd recommend you contact Adobe Tech Support.

Flash 'not supported on this architecture' error message

Hi there,
I'm having a problem with Flash and InDesign (both CS4), installed as a bundle in one go from Adobe Master Collection discs, When trying to launch InDesign or Flash, I get a message that they are 'not supported on this architecture'.
I'm on a MacPro with 2x3GHz Quad Core and 4GB running 10.5.7.
All the other CS4 Master Collection apps have installed and run fine.
My volume is formated as Mac OS Extended (Journaled). Any ideas?
thanks
Russell

I have submitted a query to the support people so hopefully I will get some more information.
This is very frustrating. I put a post in the indesign forum, but the indesign snobs told me to come to the flash forum, where the flash experts reside and would help me...ha!
Rob

UltraSPARC I processors are not supported by this release of Solaris.

Similar Messages

Maybe you are looking for