ULx for labview

Hello,
I am trying to run the OMEGA USB 2401 DAQ in labview(Board configured in Instacal) to read thermocouples. I built a VI in labview using the Universal Library(ULx) and i know the DAQ (2401) is NOT compatible with Labview (Does not have an ULx for Labview from OMEGA).
Having said that, My issue isn't the comaptibilty (yet) but the errors generated while programming/deploying/running the VI. 
I get "Dependency loaded from new path & .NET assembly changed" warnings when i start using the functions from the ULx for NI Labview library and when i deploy the  VI. 
Also, i get ERROR 10023 on the Error out nodes on the Analog Input (ULx Create channel.vi) and Analog DBL (ULx Read.vi).
I think it's a programming or ULx installation issue.  I would like to know why am i getting these warnings and the errors and how can these be fixed.
Also, If anyone can share their knowledge/experiences on these warnings and errors due to an incompatible daq. 
Any insight into this is greatly appreciated. 
Thanks,
RP. 

Hello Putnam, 
Thanks a lot for the reply.
By saying the DAQ is not compatible with labview, I mean there aren't any appropriate drivers to talk to it. MCC has drivers from OMEGA USB 2416 but i am using an OMEGA USB 2401 DAQ. The DAQs belong to the same series(24) but are different in terms of compatibility.
I have two picutres  attached below which show the bloack diagram and the error msg. 
In a nutshell, I am trying to prove 2 things.
1. If there is an error in the programming part. 
2. If the programming part is correct, do these errors mean an incompatible DAQ. 
If you can share some insight into these points, it would really be of great help. 
I appreciate your response. 
Thanks,
RP. 
Attachments:
B_Diagram with Errors msgs. .jpg ‏53 KB
Probe. .jpg ‏40 KB

Similar Messages

  • Reg: vacancy for LabVIEW developer in Bangalore, Chennai and Delhi with (1-6) years experience

    Recruitment Process for LABVIEW: Tele Interview in case of outstation candidates. Bangalore candidates will have to first come for a Written Test (Technical + Analytical), 1-2 rounds of direct technical interview.
    Degree/Branches:  B.E / B.Tech in Electronics / EEE / E&C / E& Instrumentation .
    ROLES AND RESPONSIBILTIES OF ASSOCIATE ENGINEER-SEG:
    Development
    1. Responsible for developing software for the project/module allotted to you with smooth coordination and smooth handing over of the work executed by one to another member in case of change of projects.
    2. Expected to work on multiple projects, project dead line, adhere to coding guidelines and update your progress on the project on a weekly basis to your immediate supervisor.
    3. Developing the software strictly as per the requirement specification, design and Bug free.
    4. Responsible for building a trouble-free system to the satisfaction of the customer.
    Installation
    1. Responsible for installation of hardware and software at customer site for coordinating with the vendor and Manager – Sourcing to see that works done by the vendor is as per requirement specification
    Customer Support
    1. Responsible for providing support to the customer on the system supplied by the Captronic Systems in the past as well as present.
    2. Attends to the support case within 48hrs(local) / 96hrs(outstation ) / 96hrs(out of warranty) of reporting and collecting the Support Closure Report from the customer and submit it to the SBU-HEAD
    3. Informs Support executive with Support Status, Action Taken and Support Closed On
    Training
    1. Responsible for providing training to customer on the systems supplied by Captronic Systems.
    2. Responsible for in-house training to newly recruited engineers.
    Testing
    1. Responsible for testing code developed by you, by another developer and testing entire system at the customer site.  
    2. Responsible for testing hardware supplied by Captronic System and log the test report on the hardware test register.
    Sales Support
    1. Expected to travel with sales team to provide support to sales-team in proposal making at short notice and perform flawless pre-sales system and requirement study.
    General
    1. Expected to take part in technical sessions and keep yourself abreast with the recent product released and technical advancement made
    2. Expected to become domain expert is at least one field and to constantly improve coding style and knowledge.
    Quality
    Responsible for implementing the project methodology and quality policy of the company for all activities under your purview
     Interested candidates may forward your resumes witheir current CTC and notice period to [email protected] . Salary is never the Constraint.

    SANDU SUNITHA
    D/o.S. Venkateshwarlu,
    H.No:11/57, Kothapeta,
    Maruthi Nagar,Dhone,
    Kurnool (Dt.),
    Andhra Pradesh.
    E-Mail:[email protected]
    Mobile : 91-9963586292/08884822259
    Date: 09/ 05/ 2013
    Respected Sir/Madam,
    I have done my masters in  Control Systems Engineering in Electrical
    branch from Malla Reddy College of  Engineering. I am a well organized
    person, with good knowledge about the subject, able to do
    multitasking, able to work within a team and have excellent
    communication skills. As a good Engineer and excellent team player I
    can handle the responsibilities and challenges of the post of an good
    engineer to its fullest.
    I have worked for 6 Months as Project Trainee in CSR INDIA PVT LTD. My
    responsibilities in that institute include Testing, Reporting and
    Debugging, Updating the bugs as a trainee fresher. I was a part of the
    team that designed MERCURY TESTING TOOL, world's Best Automation tool
    today. I tested the model and executed the changes.And i had worked as
    Project Engineer in FUSION ELECTRONICS on Wonder ware SCADA. Presently
    working as Project Scientist in NAL (National Aerospace Laborateries)
    under Research and Development of IVHM(INTEGRATED VEHICLE HEALTH
    MANAGEMENT) Project on MATLAB/SIMULINK ,Labview ,Wireless Sensor
    Networks,WatchDog and Testing.
    Here is the list of the documents enclosed with this cover letter.
     1. Resume
    I hope that you find these of worth. I assure you that if selected; I
    will not let you down and would prove to be an asset for your reputed
    industry.
    Sincerely yours,
    SANDU SUNITHA
    Attachments:
    SANDU_SUNITHA(29_Apr_2013).doc ‏176 KB

  • Report Generation toolkit for labview 2010

    H All.
    I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
    Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
    Thanks for reading.
    Solved!
    Go to Solution.

    Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • I need the drivers of EDR Enhanced for LabVIEW 8.6 or more, please.

    Hello, I want to acquire a signal with the microDAQ-Lite of EAGLE Technology and I need the EDR Enhanced LabView Driver. The one I have is for labview 6.x or 7. Currently I am working in Labview 2010 so I am needing the drivers for this version. I have found in a webpage (http://edr-enhanced-for-labview.software.informer.com/8.5/ ) that a version developed by National Instruments for version 8.5 exists, it says it is free, but i cant find it. Does anyone knows if a newer version exist? or where can I find the latest one?? Please help.
    Thanks in advance.
    Alejandra 

    NI does not develop drivers for third-party DAQ devices. Contact the vendor or use the driver you have. You can load version 6 and 7 into LabVIEW 2010.

  • Third-Party Licensing and Activation Toolkit for Labview 8.5

    There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
    Solved!
    Go to Solution.

    I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

  • What is the part number for labview fds cd media only

    what is the part number for labview fds cd media only - i'll purchase on line but can't find the part.

    Randy's definately right - you should talk to your local rep. before makig any purchases, but here's some numbers to start you off:
    LabVIEW FDS for Windows2000/NT/Me/9x
    776670-03 English
    776670N-0313 German
    776670N-0314 French
    LabVIEW FDS for Power Mac OS
    776690-03 English
    LabVIEW FDS for Sun Solaris
    776680-031 English
    LabVIEW FDS for HP-UX
    777010-031 English
    LabVIEW FDS for Linux
    777756-03 English
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Is there a way to get video acquisition for LabVIEW through the USB port?

    Using either the LabVIEW version 7 or lower versions.

    jeff au;
    You may want to check IVision for LabVIEW:
    http://www.geocities.com/irene_he/IVision.html
    Regards;
    Enrique
    www.vartortech.com

  • Where can I find GPIB drive for Stanford SR830 lockin amplifier for labview 6?

    Hi I am trying to work with the lockin amplifier (Model: Stanford Research SR830). Unfortunately, my computer only has labview 6 installed. Could you please let me know where I can download a SR830 driver of GPIB version for labview 6? I have checked the NI website. Only drivers for LabVIEW 8.0 and up are available here. http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=240C113D3165071BE0440003BA7CCD...
    Please let me know. If any one could upload one, that would be so great. Thank you.

    Hi Wayne,
    I am assuming you obtained the drivers from ni.com/drivers webpage? You can ask someone to convert it for you on the version conversion board and you should be good to go. If you create a new thread there please post the link to it over here so we can continue assisting you. Thank you and good luck!
    Regards,
    Basil
    Applications Engineering
    National Instruments

  • How do I create a LLB that includes the top level VI and all SubVis for LabVIEW 8.0.1?

    I've searched the boards, and I have not found a solution for creating
    a LLB with all subVIs for LabVIEW 8.0.1.  I've seen the answer to
    use Save With Options.  I haven't been able to locate this. 
    I'm not too familiar with all of LabVIEWs options, so I greatly
    appreciate any help that can be offered on this.

    You can do Save As... and then go to Duplicate Hierarchy to new location and then under Packiging options, select custom and then check the box that says save as llb.
    Yo u can also specifiy the loaction of the files in this screen.
    Kenny
    Kenny

  • OPC Server for Labview/PXI-RT

    Hi all,
    can i access Labview on a PC/WinXP or a PXI/RT System  with a
    OPC-Client (eg.:WinCC/Siemens) like a Compact Fieldpoint over the NI
    OPC Server (NationalInstruments.OPCFieldPoint). Exist a OPC-Server for
    Labview/PC/PXI?
    Thanks
    Achim

    Here you can find information concerning this issus:
    http://digital.ni.com/public.nsf/websearch/CC9CDD577F041786862572120061EB5A?OpenDocument
    Hope this helps!

  • Does anyone have SNMP toolkit for labview software by viodia?

    I want the software called SNMP toolkit for Labview. I tried contacting the people of www.viodia.com, but none of them have replied so far.  If anyone has then please send me at [email protected] or [email protected] .
    Thanx
    Santosh Chavan
    IIT MADRAS.

    Hello,
    A great place to start is with this KB: http://digital.ni.com/public.nsf/websearch/4CD3625A939A77DE852564050047D3BD?OpenDocument.
     You also might want to continue to
    search the NI site for examples with the TCP/IP protocol, and see if anyone
    else has worked with SNMP.
    For example:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=162952&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=170&message.id=159350&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=170&message.id=162952&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=170&message.id=164931&requireLogin=False
    Thanks for posting!  Good
    luck, and let us know if you have any other questions!
    Travis M
    LabVIEW R&D
    National Instruments

  • Hp driver for labview for hp8156a attenuator

    I am looking for a hp8156a driver for labview. There is not one posted in the driver section of this site. Thanks

    Here is a link to the programming manual. Section 8 shows the commands. It will take some work, but you can write your own drivers.
    http://www.home.agilent.com/upload/cmc_upload/All/opat0500.pdf
    Message Edited by unclebump on 07-12-2005 04:21 PM

  • Looking for labview training

    Hi
    i m looking for labview training with less cost in delhi or online training
    Arul

    we do provide labview training
    please check www.jambhekar.com
    my contact details
    cell 9970168164
    mail [email protected]
    Tushar Jambhekar
    [email protected]
    Jambhekar Automation Solutions
    LabVIEW Consultancy, LabVIEW Training
    Rent a LabVIEW Developer, My Blog

  • Functions in IMAQ Vision for Labview same as those in Vision Builder?

    Hi all...
    i just have a simple question..Does IMAQ Vision for Labview has the same functions of Vision Builder?
    I know that with Vision Builder you can develop an application interactively...but does it has more functions than IMAQ Vision?
    So if i buy IMAQ Vision can i develop the same kind of applications that i would make with Vision Builder?
    I´m specially interested in color matching and color analisys functions.
    Thanks

    IMAQ Vision has much more than Vision Builder. Basically, VB was created using Vision and they implemented a good number of the functions in a menu driven format. However, there are many more functions available that were not integrated into VB.
    Vision does have some good color matching and analysis tools.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • I am looking for an "Element Catalog" for Labview

    Good day.  When I have used certain design programs (Agilent's
    Advanced Design System, Applied Wave Research's Microwave Office) they
    have a section of the user's manual that lists all of the elements
    along with an explanation of the element. 
    I am looking for something similar for Labview.  Ideally it would
    list the elements that can be used in Labview along with the Express
    VIs.  I would also like to have an explanation of their
    capabilities. 
    Thank you for your time and help.
    Michael

    Your looking for the LabVIEW 7.1 Help manual.  You can either download the zip file from this link:
    (and go to the VI and Function Reference chapter)
    http://digital.ni.com/manuals.nsf/websearch/87DA07​D4B2BFE59D8625702000773C14
    Or you can interactively view the same thing online via HTML from this link:
    http://zone.ni.com/reference/en-XX/help/lv/71/TOC5​.htm

Maybe you are looking for