UM4 371: SPUM4 preparations did not finish completely.

In SPUN4, what should i do to ensure the status changes to RED. I'm following the CU&UC_SP15 document to run the SPUM4 for pre conversion before i start the upgrade?
I've done
Restart of Scan, Imported the .dat file from the note 996990 and updated in the screen.
Changed the settings and saved.
Intialize Worklist
Checked the jobs. Master job triggred few other jobs. Finally tab:Selection , select for Errors:E and enter. Nothing is displayed.
When i click the Exception list, huge list of tables are displayed.
Here i'm stuck. if i check the status, it is in red. Not sure what exactly i need to do here in SPUM4.
Is there any issues? pls share ur expertise.
regards
RGC

Hi,
Now two tables are in error in SPUM4 consistency check. M_VMCF & M_VMVA. i check these two tables in SE11 for db objects and runtime check. No inconsistency found.
If i reset the scan for these two tables and update the worklist still it is failing.
Also i note that UM4_PMIG_MASTER_JOB is failed with dump error SAPSQL_STMNT_TOO_LARGE in job log.
Need some help to fix this issue and proceed to SAPup phase...
Any idea?
rgds
RGC

Similar Messages

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried rein

when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried reinstall deleting files signing on with another account etc nothing works I have read this is an apple programing problem if so is there a fix I need iclouds thanks

This other discussion may help: Re: how do I install icloud

Prepare has not been completed succesfully

Hi Experts,
I started an upgrade release 4.6C to ECC 6.0 on windows 2003 db version is SQL Server 2005,
I am getting an error message at the begining of prepare phase,
I've also updated sapup.exe version and source system kernel to 2364,
how can i prevent this error,
ERROR: PREPARE has not been completed successfully.
Correct the problems reported by PREPARE otherwise
you cannot start the upgrade.
here is UpgDialog.log
Target SAP system is AHQ
Enter the SAP instance number [00]:
? INSTANCE NUMBER   =
Waiting for input since 30.Eki.2008 10:31:46
> INSTANCE NUMBER   = 00
Type of database system is mss
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 = E:\upgdvds\upgmaster_51033520\UMN_WINDOWS_I386
Reading data from "Upgrade Master CD/DVD"...
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/3 upgrade to release
        600 of EA-APPL
        600 of EA-DFPS
        600 of EA-FINSERV
        600 of EA-GLTRADE
        600 of EA-HR
        400 of EA-IPPE
        600 of EA-PS
        600 of EA-RETAIL
        600 of ECC-DIMP
        600 of ERECRUIT
        600 of FI-CA
        600 of FI-CAX
        600 of FINBASIS
        600 of INSURANCE
        600 of IS-CWM
        600 of IS-H
        600 of IS-M
        600 of IS-OIL
        600 of IS-PS-CA
        600 of IS-UT
        600 of LSOFE
        2005_1_700 of PI_BASIS
        700 of SAP_ABA
        700 of SAP_AP
        600 of SAP_APPL
        700 of SAP_BASIS
        700 of SAP_BW
        600 of SAP_HR
        600 of SEM-BW
        2005_1_700 of ST-PI
Target SAP system is AHQ, MSSQL database
? continue
? cancel
Waiting for input since 30.Eki.2008 10:34:32
> continue
ERROR: PREPARE has not been completed successfully.
Correct the problems reported by PREPARE otherwise
you cannot start the upgrade.
? continue
? cancel
And also in /usr/sap/put/log directoy these logs existent;
SAPup.log;
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
SEVERE ERROR: problems with SERVER mode - abort
...CANCELED at 20081030104921.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030105012
...end dialogue at 20081030105013
...begin dialogue at 20081030105013
...end dialogue at 20081030105015
...begin dialogue at 20081030105034
...end dialogue at 20081030105039
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105039
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105039
...end dialogue at 20081030105041
...STARTED at 20081030105041.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105041
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105041
...begin dialogue at 20081030105041
...end dialogue at 20081030105104
...CANCELED at 20081030105104.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.011.
...begin dialogue at 20081030105626
...end dialogue at 20081030105627
...begin dialogue at 20081030105627
...end dialogue at 20081030105630
...begin dialogue at 20081030105711
...end dialogue at 20081030105715
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105715
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105715
...end dialogue at 20081030105719
...CANCELED at 20081030105719.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030105752
...end dialogue at 20081030105753
...begin dialogue at 20081030105753
...end dialogue at 20081030105756
...begin dialogue at 20081030105814
...end dialogue at 20081030105818
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105818
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105818
...end dialogue at 20081030105824
...STARTED at 20081030105824.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105824
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105824
...begin dialogue at 20081030105824
...end dialogue at 20081030110026
...CANCELED at 20081030110026.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110034
...end dialogue at 20081030110035
...begin dialogue at 20081030110035
...end dialogue at 20081030110038
...begin dialogue at 20081030110054
...end dialogue at 20081030110104
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110104
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110104
...end dialogue at 20081030110123
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110134
...end dialogue at 20081030110140
...begin dialogue at 20081030110140
...end dialogue at 20081030110143
...begin dialogue at 20081030110149
...end dialogue at 20081030110154
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110154
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110154
...end dialogue at 20081030110155
...STARTED at 20081030110155.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110155
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110155
...begin dialogue at 20081030110155
...end dialogue at 20081030110328
...CANCELED at 20081030110328.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110335
...end dialogue at 20081030110335
...begin dialogue at 20081030110335
...end dialogue at 20081030110337
...begin dialogue at 20081030110342
SEVERE ERROR: problems with SERVER mode - abort
...CANCELED at 20081030110342.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110858
...end dialogue at 20081030110859
...begin dialogue at 20081030110859
...end dialogue at 20081030110901
...begin dialogue at 20081030110937
...end dialogue at 20081030110940
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110940
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110940
...end dialogue at 20081030110941
...STARTED at 20081030110941.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110941
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110941
...begin dialogue at 20081030110941
...end dialogue at 20081030110945
...CANCELED at 20081030110945.
CHANGES.LOG
MILESTONE
"BEG_IR"
"STO_IR"
"20081030104921"
"20081030104921"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105012"
"20081030105012"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105013"
"20081030105013"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105013"
"20081030105013"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105015"
"20081030105015"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105034"
"20081030105034"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105039"
"20081030105039"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105039"
"20081030105039"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105104"
"20081030105104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030105104"
"20081030105104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105626"
"20081030105626"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105627"
"20081030105627"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105627"
"20081030105627"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105630"
"20081030105630"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105711"
"20081030105711"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105715"
"20081030105715"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105715"
"20081030105715"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105719"
"20081030105719"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030105719"
"20081030105719"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105752"
"20081030105752"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105753"
"20081030105753"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105753"
"20081030105753"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105756"
"20081030105756"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105814"
"20081030105814"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105818"
"20081030105818"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105818"
"20081030105818"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110026"
"20081030110026"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110026"
"20081030110026"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110034"
"20081030110034"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110035"
"20081030110035"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110035"
"20081030110035"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110038"
"20081030110038"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110054"
"20081030110054"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110104"
"20081030110104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110104"
"20081030110104"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110123"
"20081030110123"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110134"
"20081030110134"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110140"
"20081030110140"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110140"
"20081030110140"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110143"
"20081030110143"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110149"
"20081030110149"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110154"
"20081030110154"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110154"
"20081030110154"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110328"
"20081030110328"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110328"
"20081030110328"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110337"
"20081030110337"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110342"
"20081030110342"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110342"
"20081030110342"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110858"
"20081030110858"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110859"
"20081030110859"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110859"
"20081030110859"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110901"
"20081030110901"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110937"
"20081030110937"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110940"
"20081030110940"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110940"
"20081030110940"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110945"
"20081030110945"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110945"
"20081030110945"
"0"
"0"
"0"
"0"
TOOLOUT.LOG
SAPup> Starting subprocess disp+work.exe with id 732 at 20081030103432
EXECUTING C:\usr\sap\AHQ\SYS\exe\run\disp+work.exe -V
disp+work information
kernel release                46D
kernel make variant           46D
DBMS client library           SQL_Server_7.00
DBSL shared library version   46D.00
compiled on                   NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00
compile time                  Jan 14 2008 08:47:41
update level                  0
patch number                  2364
source id                     0.2364
supported environment
database (SAP, table SVERS)   46A
                              46B
                              46C
                              46D
DBMS server                   MSSQL 6.5.213 or higher
                              MSSQL 7.0.1 or higher
operating system              Windows NT 4.0
                              Windows NT 5.0
                              Windows NT 5.1
                              Windows NT 5.2
                                                                                System build information:
                              LCHN : 955407
disp+work patch information
( 0.001) Correct cursor preservation (I) (note 307486)
( 0.002) SU53 reports always 'Check on S_TCODE SU53' (note 310513)
( 0.003) PXA: Emergency mode (note 307976)
( 0.004) Correct shortcut handling under EASY ACCESS (note 309791)
( 0.005) POST driver: no set locale (note 310076)
( 0.006) ASSIGN attr+off(len) TO <fs> (note 302214)
( 0.007) Contextmenu for tableview cells (note 309755)
( 0.008) Rfc and full screen (note 308383)
( 0.009) Dropdown listbox performance (note 307795)
( 0.010) Correct cursor preservation (II) (note 307486)
( 0.011) Spool-Patch-Collection 26 (note 92482)
( 0.012) Correct cursor preservation (III) (note 307486)
( 0.013) Correct cursor preservation (IV) (note 307486)
( 0.014) Core in dyCheckRadioGroups() (note 308958)
( 0.019) STAT: DB Resonse Time for SQL Server (note 310288)
( 0.021) Rfc authority problem (note 93254)
( 0.024) RFC extended trace information (note 311386)
( 0.027) CALL SCREEN: error 'MISMATCH DYNPRO NAME / CONTENT' (note 310186)
( 0.028) ABAP: OO-Transactions and event LOAD-OF-PROGRAM (note 312244)
( 0.029) Profile 'abap/oo_warn' suppress OO-context errors (note 182767)
( 0.031) Occasional core when reading statistics file (note 313669)
( 0.032) ABAP: unnecessary class-constructor calls (2) (note 213622)
( 0.035) Corrections in errormessage handling (sapdext) (note 312252)
( 0.040) TSTC: transaction is not an oo-transaction (note 315037)
( 0.044) F4 on checkbuttons (note 312258)
( 0.045) Core in moveleft() (note 312418)
( 0.046) Error trace: invalid dynpro dynpabsv.c 3490 (note 314373)
( 0.047) Error trace: memory conflict diagscrol.c (note 313967)
( 0.048) Iterator problem with iXML collections fixed (note 315119)
( 0.050) Invocation of not-implemented methods (note 314064)
( 0.051) Core at dynamic invoke with interface reference (note 314487)
( 0.052) GW: Avoid multiple send (note 314495)
( 0.053) Spool-Patch-Collection 27 (note 92482)
( 0.054) Printing via e-mail (note 311037)
( 0.055) User default time zone from TTZCU-TZONEDEF (note 314300)
( 0.056) Bad batch job statistic (note 315147)
( 0.057) LOOP AT SCREEN: counter field increased (note 314516)
( 0.058) Missing init. in temse (note 314094)
( 0.065) GW: shared block leak with multiple reg programs (note 309969)
( 0.067) RFC: load balancing over SAPRouter (note 316221)
( 0.068) No debugging until login while remote debugging (note 316456)
( 0.069) Open SQL: INTO CORRESPONDING with JOINs (note 315747)
( 0.071) Support 'Windows NT 5.1' (note 316188)
( 0.072) Destroyed dynpro load (note 207817)
( 0.073) Error in spool entry queue (note 316148)
( 0.074) mySAP.com workplace single signon enabling (note 177895)
( 0.075) Sap statistic destroys eye catcher (note 317178)
( 0.076) Syslog messages while printing (note 316630)
( 0.077) Performance optimization for list boxes (note 214806)
( 0.078) Loop in batch input (note 316686)
( 0.080) Loop in batch input 2 (note 316686)
( 0.081) Don't block s-messages in local update processing (note 312252)
( 0.084) Correct error message in conversion exit 'ALPHA' (note 318027)
( 0.085) Destroyed dynpro load (note 207817)
( 0.086) Print from rfc server (note 318692)
( 0.087) Unknown syntax errors after changing the kernel (note 142888)
( 0.088) RFC: error discarding unneeded tables (note 319634)
( 0.089) Sapstartsrv handle service stop and shutdown correctly (note 142100)
( 0.091) GW: Nonblocking connect problems (note 319675)
( 0.092) Tstc: transaction is not an oo-transaction (note 315037)
( 0.093) Coredump with 'INSERT LINES OF ...' (note 142100)
( 0.094) Corrupted cluster item displayed (note 318904)
( 0.096) BDC: Enable input in list screens (note 212569)
( 0.099) Hanging apps after writing core (note 320168)
( 0.102) Syntax warning for literals crossing line boundaries (note 319328)
( 0.103) Generation error at statement 'IF itab IS SUPPLIED' (note 321069)
( 0.105) Spool-Patch-Collection 28 (note 92482)
( 0.109) Several errors within footline (note 312848)
( 0.111) Check dynpro processor state (note 301406)
( 0.112) Memory usage roll area 0+1 (note 322070)
( 0.113) Sapstartsrv: GetProcessList exception, librfc32 delayload (note 142100)
( 0.114) Rfc call and default fontsize data (note 323342)
( 0.115) OBJECTS_NOT_COMPATIBLE with READ TABLE (note 323039)
( 0.116) Random syntax errors (MOVE-CORRESPONDING) (note 207149)
( 0.117) SKIP 1ST SCREEN: ignore GRAPH dynpros (note 317917)
( 0.118) Japanese IXML, table TCP0F (note 301406)
( 0.119) SE30 errors (note 170470)
( 0.121) Correct call of POV modules for comboboxes (note 323141)
( 0.122) Exception in NiExit (note 319675)
( 0.123) GW: No restart during db reconnect (note 321863)
( 0.125) TX variants: correct reset field input (note 325275)
( 0.126) ITS_LOGIN_CHECK_RFC rejected as XXPASS caller (note 324758)
( 0.129) Error message: correct cursor setting (note 318292)
( 0.130) Check dynpro processor state (II) (note 301406)
( 0.131) Correct SET FOCUS CONTROL for NO-PAI (note 322455)
( 0.132) Init tcview components (note 323686)
( 0.133) BDC: No loosing track of data during F4-Help (note 323061)
( 0.136) BDC: Avoid duplicate messages in log (note 324490)
( 0.138) Resize: docking control - dynpro (note 323974)
( 0.139) GW: Secinfo for start of external programs (note 323925)
( 0.140) False error texts for workplace ticket logon (note 325222)
( 0.141) "user locked" for logon attempt at CUA master system (note 325213)
( 0.143) HPL2 driver: unreadable text for green/red (note 323460)
( 0.146) Loop of dispatcher (note 325559)
( 0.148) Spool-Patch-Collection 29 (note 92482)
( 0.149) Control Framework global flush mode (note 316243)
( 0.150) TX variants: correct reset field input (II) (note 325275)
( 0.152) Em detach before process restart (note 326876)
( 0.153) Workplace: multiple logon popup for wingui sessions (note 326604)
( 0.154) ABAP Debugger: Rollback before restart (note 325903)
( 0.156) Conversion X to STRING (note 327086)
( 0.158) Bugfix new-page print on + message (note 107321)
( 0.159) IXML: coredump when parsing empty XML document (note 326888)
( 0.160) Resume in current screen after returning from exit module (note 327803)
( 0.161) SORT: close extract file, if runtime error occurs (note 328691)
( 0.162) Adapt ABAP runtime to new signal handling (note 329091)
( 0.163) BDC: corresponding screen to bsdup-entry in dybimsgi (note 330071)
( 0.164) Stat-file is not deleted in old 4.6 releases (note 329603)
( 0.169) Do not change loopheader during help processing (note 330761)
( 0.171) Disabling GUI in aRFC when called from tRFC (note 329811)
( 0.174) Test dynpro: do not call POV modules (note 332538)
( 0.175) No commit during wait in update task (note 332077)
( 0.176) Printing frames in text mode (note 320792)
( 0.177) Spool-Patch-Collection 30 (note 92482)
( 0.178) TSTC transaction is not an oo-transaction (note 315037)
( 0.179) RFC-Import of deep structures failed (note 333694)
( 0.180) STRING_BAD_REF in control break processing (note 332663)
( 0.181) Increase structure stack (note 332500)
( 0.184) PXA: initialization (note 160875)
( 0.185) PXA_NO_FREE_SPACE (note 147568)
( 0.186) Update task: increase vb2Cnt for update type 5 (note 333878)
( 0.187) Correct handling of empty loop lines (note 334886)
( 0.188) TX variants: correct reset field input (III) (note 325275)
( 0.189) EmHyperContextCreate() => alreday exists (note 334389)
( 0.192) Default cursor: reset cursor offset (note 334951)
( 0.194) Invalid client index of sap gateway (note 333949)
( 0.195) RFC authority check failed (note 93254)
( 0.196) BDC: No loosing track of data after F4-Help (note 323061)
( 0.197) ABAP: optimized dynamic SELECT clauses (note 324772)
( 0.198) Bugfix new-page print on + message (note 107321)
( 0.199) Bugfix displaying printer name after print (note 107321)
( 0.201) Error recovery (in ni datagram) after workprocess-restart (note 335967)
( 0.207) Diag: correct list size (note 337298)
( 0.209) GW: memory block freed twice (note 337957)
( 0.210) Incorrect logon ticket expiration calculation (note 337794)
( 0.218) Errortrace: invalid offset (dybasfield.c 95) (note 337820)
( 0.219) Deactivate LIST TO MEMORY on selection screen (note 313558)
( 0.220) Dbbmng0.c: generic invalidation of shared buffer objects (note 338451)
( 0.221) Itab operations on tableview-controls (note 339270)
( 0.222) GW: RFC attached gui (note 337425)
( 0.223) ASSIGN: set output length accurately (note 338925)
( 0.224) Tabstrip pages and wrong scroll offset (note 339469)
( 0.225) Set pf-status excluding and rollout (note 338954)
( 0.226) Auth problems with 20 characters transactions (note 339913)
( 0.227) Batch input: new algorithm for QID-generation (note 338246)
( 0.229) Inappropriate short dump ZDATE_ILLEGAL_LOCTIME (note 323954)
( 0.230) Print of a list dumps (note 338994)
( 0.231) Archive device (note 339659)
( 0.232) S-messages in CTU-log (note 339302)
( 0.238) Correct trace SET PARAMETER (note 340096)
( 0.240) Print of a list dumps (II) (note 338994)
( 0.242) Start Row Start Column for Dynproresizing (note 351685)
( 0.243) GW: Bad em context handling (note 351526)
( 0.244) SORT AS TEXT: length too short (note 350526)
( 0.245) Get cursor information on pushbutton (note 351890)
( 0.247) ABAP: Slin default check; type I vs. type P (note 351976)
( 0.248) GW: CCMS Monitoring Patch-Collection 1 (note 202591)
( 0.249) Short dump CALL_TRANSACTION_LOCKED (note 350360)
( 0.250) Controls and list processing (note 352065)
( 0.251) Blanks in authorization values (note 207196)
( 0.252) Tableview line/column selection (note 350363)
( 0.253) Spool-Patch-Collection 31 (note 352269)
( 0.254) Decrease and increase for dynpro and window (note 352542)
( 0.255) ABAP Debugger: Avoid DEBUGGER_ILLEGAL_VALUE in RFC-Debug. (note 182989)
( 0.256) Incomplete DATA in D010INC and D010TAB (note 352480)
( 0.257) Diag: warning and resize (note 212524)
( 0.258) Workplace: provide logon ticket for X.509 logon (note 350776)
( 0.260) StartRow StartColumn for Dynproresizing (note 351685)
( 0.261) EmHyperContexts: reduce memory consumption (note 353103)
( 0.262) Invalid focus memory (note 353496)
( 0.263) EmHyperContexts: reduce memory consumption (II) (note 353103)
( 0.266) Slow SetQoS due to unnecessary DNS query (note 180940)
( 0.268) ABAP-Exception-Handling: Internal State-Stack (note 350146)
( 0.269) BDC: no user command allowed on SAPMSYST 0040 (note 163639)
( 0.270) Wrong portability warnings from extended syntax check (note 353681)
( 0.271) Passing EXP-IMP parameters in RFC calls (note 352629)
( 0.272) Spool-Patch-Collection 31a (note 352269)
( 0.273) Modal level and suppress dialog (note 355616)
( 0.274) DBIF_RSQL_INVALID_REQUEST with very old cluster records (note 353651)
( 0.275) Horizontal radiobutton groups (note 355260)
( 0.276) Proportional cut for variable Dynpro-objects (note 351685)
( 0.277) Hostname resolution blocks processes (note 356788)
( 0.278) Tabstrip pages and wrong scroll offset (note 339469)
( 0.280) Core in DiagiTableHeader (note 159421)
( 0.281) GW: Bad statistic after summer time switch (note 353893)
( 0.283) CPIC-Timeout for frontend printing (note 352269)
( 0.284) List scrollbar and docking control (note 357241)
( 0.285) Sy-SubRc 8 with SELECT SINGLE on logic cluster table (note 355714)
( 0.287) Missing entry in table FIDO (note 357019)
( 0.290) BDC: conversion of old batch-input logfiles (note 356758)
( 0.293) Invalid sapgui data (note 358681)
( 0.294) Reading of ASTAT records fails in 4.6D (note 358532)
( 0.295) ABAP: Loop in function LookForFref (note 357698)
( 0.297) Muliconnect error reporting (note 358171)
( 0.298) RFC: data dependent read error (note 358557)
( 0.300) Protect against 'error in datastream' (note 359511)
( 0.301) Treatment of looplines by loc. horiz. resize (note 212861)
( 0.302) Initial values with DynpValuesUpdate (note 359873)
( 0.303) ABAP: warning for duplicate keys removed (note 359114)
( 0.304) Core dump when calling RfcClose (note 359865)
( 0.306) Suppression of unnecessary syslog messages (note 359523)
( 0.308) System Core Dump with F4-Button in R/3-Dialog(modal) setting (note 212861)
( 0.309) Core dump in RFC engine (note 353136)
( 0.311) Start EASY-ACCESS only for dialog sessions (note 360980)
( 0.314) Check if dynpro exists before access it (note 361120)
( 0.315) Optimize concatenate for STRING (note 327185)
( 0.317) New RFC logon method 'external identification' (note 358469)
( 0.319) List scrolling: last line missing (note 362181)
( 0.320) GW: Set locale in update task (note 360971)
( 0.321) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS (note 361532)
( 0.322) Extended syntax check with BETWEEN ... AND (note 361470)
( 0.323) ICMAN fails to open event flags for HTTP connections (note 360696)
( 0.326) Open SQL: improved statement generation for UPTO (note 361392)
( 0.327) Check (ABAP_ASSERT) in ASSIGN to avoid core (note 363059)
( 0.329) Bad NOWP request (note 365156)
( 0.330) ABAP; SCAN STRUCTURE: error in SELECT-ENDSELECT logic (note 363992)
( 0.331) Native SQL: return code for EXECUTE PROCEDURE (note 364707)
( 0.332) Semaphore error in ASTAT (note 363499)
( 0.333) Printing with format LETTER (note 363624)
( 0.334) Problems with missing or short quickinfo (note 363394)
( 0.335) Parameters in macro _splitpathU swapped (note 365337)
( 0.339) Modified length mismatch (note 207817)
( 0.340) Problems with missing or short quickinfo (2) (note 363394)
( 0.341) Errortrace invalid value dybas.c 0179 (note 337820)
( 0.342) Errortrace invalid parameter dynpdiag 1131 (note 337820)
( 0.343) Errortrace dytracefocus invalid container (note 353496)
( 0.346) Spool-Patch-Collection 32 (note 352269)
( 0.347) Invalid focus memory 2 (note 353496)
( 0.348) Prevent duplicate RFC struct parameter transmission (note 365916)
( 0.351) Native SQL: memory leak for stored procedures (note 367509)
( 0.352) Resizing side to side and one below other Dynpro-Objects (note 367811)
( 0.353) Check ztta/dynpro_area (note 167229)
( 0.354) Problems with missing or short quickinfo (3) (note 363394)
( 0.355) GW: Bad NOWP request II (note 365156)
( 0.358) Breakpoint in ABAP Debugger at CONTINUE (note 368433)
( 0.359) Errortrace: should not happen (dycuahlp 1661) (note 369415)
( 0.360) Reactivate suspended clients (note 367384)
( 0.361) Disable persistent trace for RFC-Library (note 364034)
( 0.365) Large file support (note 330992)
( 0.366) IMPORT: avoid IMPORT_INIT_DECOMPRESS_FAILES (note 370053)
( 0.367) BAPI_USER_CHANGE returns wrong/blank error message (note 369761)
( 0.368) ABAP debugger: field display and global TABLES-parameters (note 370103)
( 0.369) ABAP debugger: empty source display (note 370717)
( 0.370) Saplicense: license buffer not initialized (note 371301)
( 0.371) List token in SELECT (note 370587)
( 0.373) GW: Duplicate conversation ids in gateway work processes (note 371481)
( 0.375) Dynamic Type at CREATE DATA (note 371607)
( 0.376) Printing selection page & long transaction (note 370661)
( 0.377) Library iXML: correction of CDATA size problem (note 371846)
( 0.378) DEC field input for none DDIC fields (note 373047)
( 0.379) Spool-Patch-Collection 33 (note 352269)
( 0.380) C-Call ABAP_CALLSTACK (note 371779)
( 0.381) Loop during decompression of corrupted Sources/Loads (note 374200)
( 0.382) Extended table compression for certain RFC connections (note 373452)
( 0.383) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS and recursion (note 361532)
( 0.384) PostScript error with TrueType fonts (note 373604)
( 0.385) XML-Import failed after empty structure tags (note 374447)
( 0.386) Disable QoS support by default (note 180940)
( 0.387) Message display type (note 368333)
( 0.389) DEC field input for none DDIC fields II (note 373047)
( 0.390) Long running report (note 373343)
( 0.391) Illegal request looping in dispatcher (note 373345)
( 0.394) Fix printing selection page & long transaction (note 370661)
( 0.397) Reserve address space for Extended Memory (note 373326)
( 0.399) VALUE /namespace/const (note 371720)
( 0.402) DYNG: get translated buttontexts from D021T (note 363394)
( 0.403) Correct returncode for SET_DYNP_FIELD_VALUE (note 374941)
( 0.404) Refresh control from screen (note 375251)
( 0.406) Receive result of aRFC (note 375356)
( 0.410) Disp+Work doesn't start up (note 376242)
( 0.414) DEC field input for none DDIC fields (note 373047)
( 0.415) Core dump in GenViewGetPbagRudi (note 375055)
( 0.416) DBIF_REPO_PART_NOT_FOUND during Garbage-Collection (note 374884)
( 0.417) Control focus correction (note 374510)
( 0.418) Title problems (note 374560)
( 0.419) Window width > 255 cause list problems (note 375856)
( 0.420) IS REQUESTED/SUPPLIED and RETURNING parameter (note 375329)
( 0.423) DEC field input for none DDIC fields (note 373047)
( 0.424) Core in appl info (note 376906)
( 0.425) Core in DiagIConvert, if trace level 3 (note 377184)
( 0.426) Correction for Spool-Patch-Collection 33 (note 352269)
( 0.429) Change default for cursor preservation (note 378706)
( 0.430) Error trace from dyariftb() (note 378093)
( 0.431) Enqueue table overflow, syslog message corrected (note 378682)
( 0.433) DEC field input for none DDIC fields (note 373047)
( 0.434) Illegal chars set spooljob to error (note 379119)
( 0.435) Debugger: data references and tables of type I (note 378838)
( 0.436) Set DISPLAY AGAIN in TH (note 380164)
( 0.437) Prepare: several mySAP.com components in one DB (note 379572)
( 0.439) Workplace: disable password logon (note 379081)
( 0.445) DiagSetCodepage() failed (note 382240)
( 0.446) Sapstartsrv update available.log on Start/Stop (note 142100)
( 0.447) Ldapreg: ITS LDAP registration (note 379691)
( 0.448) GW: Wp stuck in PRIV mode (note 381870)
( 0.449) Too many invalidations on USRBF2 (note 319727)
( 0.450) Correct static focus on subscreens (note 380809)
( 0.451) Correct HOLD DATA message (note 381528)
( 0.452) Trace DYNP_SET/GET_STATUS (note 381694)
( 0.453) Init screen buffer parameters (note 382032)
( 0.454) No core in dypov_treatDpovtabRow (note 381221)
( 0.455) Server shutdown after bind error (note 382440)
( 0.457) Handling of fatally corrupted cluster records (note 381968)
( 0.466) EXPORT: dynamic export of strings (note 384694)
( 0.467) Message in help: no core dump (note 384639)
( 0.468) Pull up other objects down of table after TABLE_PBO_DONE (note 383033)
( 0.469) Tablecontrol init and context (note 373977)
( 0.470) Correction of the nls locale check tool (note 40815)
( 0.471) GW: Missing aRFC response (note 384015)
( 0.472) GW: Core during write of statistic (note 384433)
( 0.473) Wp stuck in PRIV mode (II) (note 381870)
( 0.474) Shared Pool disturbed corrected (note 384810)
( 0.477) SORT/EXTRACT: large file support (note 384257)
( 0.478) Codepage problem: sap8000 (shift_jis) (note 384947)
( 0.479) Active/Inactive-Handling (note 385628)
( 0.480) Sporadic logon failures in batch processing (note 385894)
( 0.483) GW: Free unallocated memory (note 387747)
( 0.484) SORT/EXTRACT: large file support (II) (note 384257)
( 0.487) Open SQL: several minor errors (note 386783)
( 0.489) RABAX no dbrollback and dbcommit at core (note 386268)
( 0.490) C-call DY_GET_S_MESSAGE available (note 383089)
( 0.491) Correct I message for batch input (note 386661)
( 0.492) Do not skip message popup (note 385147)
( 0.493) Async RFC: set size of full screen (note 385132)
( 0.494) Correct error messages for CALL SUBSCREEN (note 386674)
( 0.495) Logon tickets slightly too long valid (note 387595)
( 0.496) Format error during output of empty strings (note 385796)
( 0.497) RFC: patch collection (46D) (note 387366)
( 0.498) Method calls in arithmetics (note 387066)
( 0.499) Reallocate the number of boxes for resizing (note 388988)
( 0.500) Generate correct forkey selects in dynpro (note 388699)
( 0.501) Destroyed dynpro load (note 207817)
( 0.502) Open a new audit file next day after maxsize event (note 321148)
( 0.503) Delete audit files with extended filenames (SM18) (note 370829)
( 0.504) DiagSetCodepage() failed (note 382240)
( 0.507) Missing arfc response (II) (note 384015)
( 0.508) Generation of very long sources: repeating END_INBUF (note 389041)
( 0.509) Correct hold control framework focus (note 389364)
( 0.510) BDC: F1 or F4-request in bdcdata (note 323061)
( 0.511) Overflow of memory (note 370661)
( 0.512) PARAMETERS referencing a named DDIC include (note 389940)
( 0.515) DB2/390: default dbs/db2/use_hints=abap->1 (note 162034)
( 0.516) Recovery from NI-error after WP-restart (note 335967)
( 0.517) Avoid RFC server timeout (note 390219)
( 0.522) Avoid core in ABAP debugger by bad string references (note 391169)
( 0.523) Keep scrollposition (note 391871)
( 0.524) ABAP debugger: Display header for bad object reference (note 391187)
( 0.530) Enqueue traces during transaction reset (note 392873)
( 0.531) Garbage-Collection beyond 600MB (note 393378)
( 0.534) Enqueue traces during transaction reset (II) (note 392873)
( 0.535) CPICFAIL in smq1 after kernel upgrade (note 394549)
( 0.536) APO: correct internal table processing in COM routines (note 395695)
( 0.537) DYNPRO_FIELD_CONVERSION on Get Parameter (output) (note 395450)
( 0.538) Core in dyGetDataR() (note 395299)
( 0.540) Core in DpFreeResource after restart (note 394454)
( 0.542) Restore of sy.datar when popping screen (note 393511)
( 0.543) Open SQL: Memory leak when updating with %_HINTS (note 393897)
( 0.547) List scrolling: last line missing(2) (note 362181)
( 0.548) DiagSetCodepage() failed (note 382240)
( 0.549) Limit on number of sessions per logon (note 392369)
( 0.552) ABAP: error in string access with offset or length (note 396800)
( 0.553) Wrong portability warnings from SLIN (note 353681)
( 0.555) SY-VLINE in Thai on AS/400 (note 391627)
( 0.557) Unsuccessful READ on a SORTED TABLE (note 395205)
( 0.559) Sapstartsrv shutdown one process after the other (note 142100)
( 0.560) GW: COMPUTE_INT_TIMES_OVERFLOW in SAPLSALK (note 395671)
( 0.561) MS: improved trace features (note 396750)
( 0.562) ABAP: PERFORM .. CHANGING VALUE(<itab-line>-comp) (note 399078)
( 0.564) No hint generation in case of SELECT SINGLE (note 397170)
( 0.565) READ TABLE with attribute keys (note 399263)
( 0.566) Error in msg-server communication (note 398525)
( 0.568) Spool-Patch-Collection 34 (note 352269)
( 0.569) GW: Destroyed update start message (note 157840)
( 0.576) ABAP debugger: display active calls (note 399920)
( 0.577) ABAP debugger: display of interface aliases (note 399915)
( 0.578) ABAP: SET LOCALE and SUBMIT / CALL TRANSACTION (note 399918)
( 0.579) Enforce minimal patch level for database library (note 400216)
( 0.581) Ticket logon resets initial flag (password) (note 402076)
( 0.582) New translations cause locks on D020 (note 36795)
( 0.585) Catching of problems during string <-> char handling (note 402340)
( 0.586) GET LOCALE: language incorrect (note 402801)
( 0.587) Icons are not printed properly (note 402967)
( 0.588) Em context destroyed after exception (note 403562)
( 0.589) Dummy call: super constructor (note 401553)
( 0.590) Visibility of local types (note 401910)
( 0.591) Coredump with READ TABLE and float attributes (note 400516)
( 0.592) Offset/length specifiers in a table key definition (note 402255)
( 0.594) Resize: docking control - dynpro (note 323974)
( 0.598) Avoid inconsistent overall source time stamp (note 405821)
( 0.599) PXA: correct unfound object cache & statistic counters (note 406075)
( 0.600) SY-VLINE and JAVASCRIPT in Thai on AS/400 (note 391627)
( 0.601) Avoid inconsistent overall source time stamp (II) (note 405821)
( 0.605) RFC_DEBUGGING_NO_DIALOG_USER (note 407471)
( 0.606) Core in dyAbapGetContainerPosition (note 405930)
( 0.607) X.509 certificate logon: timezone not set (note 408601)
( 0.608) Unsuccessful READ on a SORTED TABLE (II) (note 409175)
( 0.609) IPC, max shm size detection accelerated (note 406738)
( 0.610) Graphical characters and page borders (note 406673)
( 0.611) SE30: close measurement on /n (note 381500)
( 0.612) Detail selection does not work correct (note 400090)
( 0.613) Negative value for hdcurrow is not permitted (note 352542)
( 0.624) Cutting terminal names (note 412628)
( 0.625) Update debugging (note 336925)
( 0.626) Control for Table-Control in Resizing is wrong (note 388988)
( 0.627) Correct treatment of field symbols (note 406306)
( 0.629) Init params of ab_ListGetFieldName (local field symbols) (note 413506)
( 0.630) Open SQL: more than 255 alias names in SELECT list (note 411136)
( 0.631) Open SQL: wrong SY-DBCNT for FETCH NEXT (note 412399)
( 0.632) Core in db_blob (note 412063)
( 0.633) Core in DiagGetWindowDimension (note 412168)
( 0.634) Core by 'Display current statement' in debugger (LREF) (note 411673)
( 0.636) Coredump in PfOpenScratchFile (note 414242)
( 0.637) VALUE class=>const (note 413384)
( 0.639) Hebrew Sapscript printing causes signal 11 (note 155261)
( 0.640) Workarea change in case of SELECT SINGLE with SY-SUBRC 4 (note 410175)
( 0.641) Function DB_DBSCHEMA returns correct result now (note 411971)
( 0.642) Wrong syntax error at literals in macros (note 411757)
( 0.643) Change of an interface (note 411769)
( 0.647) Dbbuf: restrict rtbb/buffer_length to 200000 [kB] (note 414220)
( 0.649) Inserted option WAN_CONN into RfcOpenEx (note 415169)
( 0.650) SU01: error texts for invalid passwords (note 369761)
( 0.651) CONVERT TIME STAMP... for 9999/31/12 23:59:59 (note 401610)
( 0.653) Text of check- and radiobuttons with icon (note 414703)
( 0.654) MESSAGE ... INTO no rabax at message x (note 408740)
( 0.655) New list line at program load (note 412142)
( 0.656) Displaying frames in lists (note 412787)
( 0.657) Selection page and empty report (note 370661)
( 0.658) VMIT (NT): higher precision (note 414135)
( 0.659) Runtime error DSTEP_WRONG_PROGRAM (note 416350)
( 0.660) Core in csulzh.c (note 413899)
( 0.661) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
( 0.662) Highlighting in Hebrew list printing (note 353987)
( 0.663) Extended syntax check with BETWEEN ... AND (2) (note 361470)
( 0.664) Breakpoint at (RFC) function module (note 414952)
( 0.665) Don't break iXML because of missing character (note 410929)
( 0.667) WP opmode switch (note 415840)
( 0.674) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
( 0.675) Duplicate key in VBMOD (note 416961)
( 0.676) Trace spa/gpa memory overflow (note 34533)
( 0.677) Dbbuf: check rtbb/buffer_length and rtbb/max_tables (note 414220)
( 0.678) Display '?' in DropdownListboxes (note 417405)
( 0.679) Correct call dialog for system messages (I) (note 416053)
( 0.680) Correct call dialog for system messages (II) (note 417096)
( 0.682) Memory leak in short storage (MEMSAV) (note 419819)
( 0.683) Spooler C-call info msg in trace (note 418740)
( 0.684) Dithering of color bitmaps (note 410727)
( 0.685) Standalone enqueue server prepared (note 419283)
( 0.686) Correction of the nls locale check tool (note 40815)
( 0.687) System Core Dump in C-Destructors of ABAP Objects (note 416163)
( 0.688) Q

Hi Experts,
After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
Thanks

ITunes 10.5 Upgrade fails to Install. The Error Message is: "There is a Problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."

When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

I keep getting a message that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." when I try to download iTunes 10.5. So I can't update it. How can it be fixed?

When I try to download iTunes 10.5, I keep getting the message "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." Therefore I can't update my iTunes to the new version. How can I solve this? I don't want to pay for technical support as this seems to be a problem with the iTunes package Apple is providing itself by that message.

Hello, hartadrian.
I would recommend attempting to repair the Apple Software Update via the steps below. Once processed attempt to download, update or install iTunes 11.
How to repair Software Update for Windows
http://support.apple.com/kb/TA24326
If you are still experiencing the issue, completely remove all components of iTunes in the order specified of the article below. Once this has been processed, attempt to download and install iTunes 11.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you experiencing errors when removing components of iTunes, follow the steps in the article below.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here?

Mozilla 5.0 did not finish install. not in listed in remove programs list to uninstall. How do I find it to uninstall as it will not let me reinstall previous version and i now have no internet access?

i installed service pack 3(windows) My system is a dell desktop running XP. Then when done a message popped up and said receommended to install yahoo firefox version 5.X. Install of firefox did not finish apparently now I have not access to internet and cannot reinstall it as it thinks the previuos install is not completed and keeps telling me to reboot which I have done a billion times. It is not listed in add/remove programs list to remove it /uninstall it. Where /how to I undo the partial install? Thank you. Trish

You do not need the Yahoo Firefox version.
You can find all Firefox 5 versions here:
*Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html

Download on purchased item did not finish

i recently purchased an album that contained bonus material(videos)
...when the download was almost finished, an error occured and itunes was no longer responding and my computer closed the program...two of the videos(bonus material) did not finish downloading...how can i continue the download of this album.
i already tried "completing my album" ..but that option is having me re-purchase the album.

Store>Check for Available Downloads
If this fails:
http://support.apple.com/kb/HT1933

Os10.5 error message 'A program run as part of the setup did not finish as expected. Contact your package vendor.''

I'm using windows xp and kept getting error message when installing the latest os10.5. 'There is a problem with this windows installer package. A program run as part of the setup did not finish as expected. Contact your support personal or package vendor.' I've tried removing itunes completely then re-install the latest version but same message popped up again. Help?

I'm using windows xp and kept getting error message when installing the latest os10.5. 'There is a problem with this windows installer package. A program run as part of the setup did not finish as expected. Contact your support personal or package vendor.' I've tried removing itunes completely then re-install the latest version but same message popped up again. Help?

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

It maybe trying to boot from the incomplete install.
Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

When attempt to download 10.5, receive message: "...problem with this widows installer package. a program run as part of the set up did not finish as expected. ..." -- what to do?

I have attempted to upgrade my iPad which is necessar to downloan an app I want (My Radar). The iTunes on my computer will not process the upgrade of 10.5 without message: "There is a problem with this Windows Installer Package. A program run as part of the set up did not finish as expected. Contract your support personnel or packae vendor." ..... Little old lady needs help, my iTunes "appears to be 10.5 on my PC; however, will not upgrade my iPad. I have BitDefender as the "protector" on my PC if that is the issue.

Go to support.microsoft.com/fixit
In section 2 click on: Install or upgrade software or hardware
Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
This link may get you there: http://support.microsoft.com/mats/Program_Install_and_Uninstall/
Let it run and then try to download it again

UM4 371: SPUM4 preparations did not finish completely.

Similar Messages

Maybe you are looking for