UME Administration Software Component has no DCs in it?

Hi,
I've successfully imported the "UME ADMINISTRATION 7.00" SC for Netweaver 2004s SP10 patch level 0 (and all buildtime required SCs) in a development track, but the Component Build Service says there is nothing to build. The build compartment for the SC does not contain any DCs... Any idea what might be the reason?
In Netweaver Developer studio the SC is also empty.
Thanks in advance,
Jeroen
SC filename: UMEADMIN10_0-10003471.SCA

If you only want to use UME API you should only have that SCA as "Required Software Component" in your track and thus only as archives.
Source &Archive means you want to develop the UME API and since the SCA contains no sources you will get nothing in your track.
Regards,
Marc

Similar Messages

Entry in SLD for SAP delivered software component contents

Hi
I have a predelivered software component version ( SWCV ) ESA ECC-SE 602 which I imported into IR ( by setting the *tpz file in the appropriate folder and the imported from IR ) This worked ok. Now I have a custom SWCV - that I created in SLD. Before importing this into IR , I want to create a install time dependency from this custom SWCV pointing to the standard. SWCV.
Question is : Where is the entry in SLD for the SAP standard SWCV - i.e ESA ECC-SE 602 - without this entry - in SLD - how can I point my custom SWCV to ESA ECC-SE 602 ? Or is there any other zip file apart from the *tpz file that is available in marketplace for ESA ECC-SE 602 that I need to import into SLD ? I am stuck at the point of defining the dependency with this question.

Hi
I see that in IR , the SAP std software component has the following name ECC-SE, version 602 . But I do not see a corresponding entry for this in the software catalog in the SLD.
*Question is - should an entry be created automatically in SLD under the software catalog for all SAP delivered contents whenever the tpz file is imported into the IR ? I don't see it created in our case. What is missing ?

Software Component in two tracks

Hi,
I have created a software component in SLD and created a track in NWDI. I have imported that track in my NWDS and have added DCs to my SC. My SC has been deployed to all the runtime environments correctly.
Now I want to deploy the content of this SC to another landscape of runtime systems so I have created a new track, configured the new runtime systems and imported the SC to the track.
Even though it is the same SC than in track 1, the SC in track 2 does not contain the DC's of track 1. I need to have these DC's deployed to all my runtime systems of track 2. Shouldn't an SC always contain its DCs no matter which track it is part of?
What have I done wrong? How can I have my DCs deployed to my other runtime systems using NWDI?
Thank you very much in advance for any help you could provide helping me figuring out the situation.
Regards,
Renaud

Hi,
You should create a Track Connection in your CMS (Change Management Service - Transport Studio).
1. Connect as administrator in your CMS
2. Click on the "Landscape Configurator" link (top-left)
3. Click on the "Track Connections" tab
4. Click on the "Add..." button
5. Choose your source and destination tracks, and the connection type.
If you plan that TrackB is for upgrading services of TrackA but you want to maintain TrackA for solving defects, then you should choose "Repair" as a connection type. Otherwise, you should choose "Transport".
Regards
Arnaud

Could not read list of software component versions

Hi,
I am trying to import software components from sld into esr. When i click on display available components i get the error :
Could not read list of software component versions
The details show:
Could not read list of software component versions
from SLD (COULD_NOT_READ_SWCV)
HTTP response code: 403 (Forbidden)
we were initially getting access issue also in details, but that has been rectified by assigning appropriate roles.\
Kindly help.

Hi,
Use t-code SLDCHECK on ABAP stack to confirm the connection of XI system and SLD.
Check whether SLD and XI system are on same server. Refer to OSS note - 720717 to integrate XI with other SLD.
In the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
GreatDay,
venkatagiri
Edited by: Giriii on Sep 15, 2011 8:14 AM

An updated blackberry desktop software component must be insalled before you continue

i have downloaded blackberry software manager 7.1 and trying to update bold 9900. To start of with the software picks up the phone connected to it and then i get to the update bit on desktop manager fine, click update and get a message (An updated blackberry desktop software component must be insalled before you continue). This is where the problems start. downloading this does somthing and the desktop software doesnt recognise any blackberry device connected. its not damaged leads or ports, i have removed and re installed. i have run as administrator. i have tried everything, the only thing i can think of is if its a dodgy update by blackberry. hope someone has this problem and found the problem
install New windows original Have Last update And Not Work
download Last firmware And Not Work ?
Need Help ??
when download component comple ?

Uninstall the Desktop Sofware and Downlod it again. Install it, when greeted by the setup screen make sure to uncheck the automatic update option. Go ahead and try it again. Good luck!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Error during import/export Software Component in IR

After updating XI(DEV) to following SP19 stacks, the problem was encountered with the export or import of design objects in integration repository.
All following were completed successfully,
1. SAP KERNEL 6.40, to latest patch level 155;
2. SAP BASIS 6.40, from SP15 to SAPKB64019;
3. SAP ABA 6.40, from SP15 to SAPKA64019;
4. SAP J2EE ENGINE 6.40, from SP15 to SP19;
5. XI ADAPTER FRAMEWORK CORE 6.40, from SAPXIAFC15 to SAPXIAFC19;
6. XI ADAPTER FRAMEWORK 6.40, from SAPXIAF15 to SAPXIAF19;
7. XI TOOLS 6.40, from SAPXITOOL15 to SAPXITOOL19;
When we try to import the Software Component XI3_0_SAP_BASIS_6.40_19_00.tpz, a problem happened with the exception (See Exception below), and then we cannot log in any component of JAVA stack for unauthorized reason untill we restart the J2EE engine.
When we try to export the Software Component, the exporting procedure will be interupted for some exsited or unexsited(maybe already-deleted) message interfaces (See , and then we cannot log in any component of JAVA stack either as after importing.
Exception:
#7 13:19:07 [AWT-EventQueue-0] ERROR
com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID:
com.sap.aii.ib.gui.tools.transport.rb_transport.IMPORT_FAILED
com.sap.aii.utilxi.misc.api.BaseException: Import failed
at
com.sap.aii.ib.gui.tools.transport.ContentImportProgressDialog.retryInForceMode(ContentImportProgressDialog.java:245)
at
com.sap.aii.ib.gui.tools.transport.ContentImportProgressDialog.executeConcurrentAction(ContentImportProgressDialog.java:198)
at
com.sap.aii.ib.gui.tools.transport.ConcurrentProgressDialog$ProgressDialogRunnable.run(ConcurrentProgressDialog.java:207)
at
com.sap.aii.utilxi.misc.thread.ThreadPool$ThreadPoolThread.run
(ThreadPool.java:321)
Root cause:
MESSAGE ID:
com.sap.aii.ib.server.pvcadapt.rb_XIPropProvider.PS_STORAGE_XIOBJECT_FAILED
com.sap.aii.ib.core.util.WarnMessageException: Attempt to save
object "Integration Scenario CheckFlightSeatAvailability |
http://sap.com/xi/XI/Demo/Agency" failed
Attempt to save object "Integration Scenario
CheckFlightSeatAvailability | http://sap.com/xi/XI/Demo/Agency" failed
Options:
Text: Continue Value: 1
at
com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.createWarnMessageException(PvcTransport.java:539)
at
com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.handleImportException(PvcTransport.java:522)
at
com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport
(PvcTransport.java:141)
at
com.sap.aii.ibrep.server.transport.impl.pvc.RepPvcTransport.pvcImport
(RepPvcTransport.java:108)
at
com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.pvcImport(InternalRepTransportServiceImpl.java:185)
at
com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:706)
at
com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:362)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:151)
at
com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:75)
at
com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730)
at
com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:100)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal
(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run
(DispatchImpl.java:198)
at
com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request
(P4SessionProcessor.java:129)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged
(AccessController.java)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java)
Serialized server exceptions:
MESSAGE ID:
com.sap.aii.ib.server.pvcadapt.rb_XIPropProvider.PS_STORAGE_XIOBJECT_FAILED (serialized)
com.sap.aii.utilxi.misc.api.ResourceException: Attempt to save
object "Integration Scenario CheckFlightSeatAvailability |
http://sap.com/xi/XI/Demo/Agency" failed
at
com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.throwRootCause
(PvcTransport.java:448)
at
com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport
(PvcTransport.java:133)
at
com.sap.aii.ibrep.server.transport.impl.pvc.RepPvcTransport.pvcImport
(RepPvcTransport.java:108)
at
com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.pvcImport(InternalRepTransportServiceImpl.java:185)
at
com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:706)
at
com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:362)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:151)
at
com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:75)
at
com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730)
at
com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:100)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal
(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run
(DispatchImpl.java:198)
at
com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request
(P4SessionProcessor.java:129)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
(Compiled Code))
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java(Compiled Code))
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged
(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java(Compiled Code))
MESSAGE ID:
com.sap.aii.ib.server.pvcadapt.rb_XIPropProvider.PS_STORAGE_XIOBJECT_FAILED (serialized)
com.sap.aii.ib.server.propagation.XIPropagationException: Attempt to
save object "Integration Scenario CheckFlightSeatAvailability |
http://sap.com/xi/XI/Demo/Agency" failed
at
com.sap.aii.ib.server.propagation.XIPropagationException.createFromException(XIPropagationException.java:48)
at com.sap.aii.ib.server.pvcadapt.XIPropagationProvider.setData
(XIPropagationProvider.java:235)
at
com.tssap.dtr.pvc.propagation.providers.WindowedDelegatingPropagationProvider.setData(WindowedDelegatingPropagationProvider.java:220)
at
com.tssap.dtr.pvc.propagation.server.CatalogTagProvider.setData
(CatalogTagProvider.java:107)
at
com.tssap.dtr.pvc.propagation.server.PropagatableElementsProvider.importFromStream(PropagatableElementsProvider.java:278)
at
com.tssap.dtr.pvc.propagation.server.PropagatableElementsProvider.setData(PropagatableElementsProvider.java:215)
at
com.tssap.dtr.pvc.propagation.providers.StatefulPropagationProvider$State.setData(StatefulPropagationProvider.java:274)
at
com.tssap.dtr.pvc.propagation.providers.StatefulPropagationProvider.setData(StatefulPropagationProvider.java:79)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.setData
(PropagatableProvider.java:595)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.import_
(PropagatableProvider.java:780)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.import_
(PropagatableProvider.java:821)
at com.tssap.dtr.pvc.objectpers.Propagator.import_
(Propagator.java:104)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiContent
(PropagatorImpl.java:245)
at com.sap.aii.ib.server.propagation.Propagator.importXiContent
(Propagator.java:156)
at
com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport
(PvcTransport.java:104)
at
com.sap.aii.ibrep.server.transport.impl.pvc.RepPvcTransport.pvcImport
(RepPvcTransport.java:108)
at
com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.pvcImport(InternalRepTransportServiceImpl.java:185)
at
com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:706)
at
com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:362)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:151)
at
com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:75)
at
com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730)
at
com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:100)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal
(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run
(DispatchImpl.java:198)
at
com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request
(P4SessionProcessor.java:129)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
(Compiled Code))
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java(Compiled Code))
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged
(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java(Compiled Code))
Caused by: com.sap.aii.ib.server.pvcadapt.XIPropProviderException:
Attempt to save object "Integration Scenario
CheckFlightSeatAvailability | http://sap.com/xi/XI/Demo/Agency" failed
at
com.sap.aii.ib.server.pvcadapt.XIPropagationProvider.writeXiObject
(XIPropagationProvider.java:290)
at com.sap.aii.ib.server.pvcadapt.XIPropagationProvider.setData
(XIPropagationProvider.java:220)
... 31 more
If I use the "release transfer" function of IR, the new created version can be export correctly.
I've tried to create a new SC and SWCV, it can be export & import correctly.
Also, if copied all of the objects from a namespace to a new namespace, and delete the old one, that SWCV can be export correctly.
Anyone knows what's wrong within my IR?
Thanks.

Hi,
While Importing some components has missed and the Exception is unable to handle it. Is it possible for you to Import again and check the table space is sufficient.
Regards
Agasthuri Doss

Creating a new DC in existing software component

Hi,
I am trying to create new DC in a software component that is custom developed.
You can consider this as a totally build product and I want to extend the features implementing new DC.
I am able to import the development components, and when I try to create a new DC in the configuraition pool, I am anot able to select the vendor from the Vendor dropdown.
Can some one explain how to do this?
Is it possible to keep the software component as is, but copy the same to a custom namespace (with new vendor name newvendor.com) and create a dc in it. This way i can change the sc as is and make changes on new SC.
Please suggest.
Thanks and regards,
Chinnu

Hi Satya,
Thankyou for quick response.
I did not create any namespace prefixes in SLD.
Can you give me some clarity about name spaces? I am not very clear about the same.
About the SC i am trying to modify, it is not SAP deliverd SC, instead created under custom vendor name and I am able to import the DCs and hopefully check in the same.
Also, after seeing your reply, I checked for any available namespaces in SLD, and all I can see is sap.com/home etc., which are owned by SAP.
Do I have to create a new namespace with the vendor name to create new DCs?
Also, I get this error message when trying to create a new DC:
Syntax of 'sap.com/home/NewDC' is not valid: Name suffix must be spelled lower case: home/NewDC
Please suggest.
Thanks and regards,
Chinnu
Edited by: Chinnu on Aug 14, 2009 10:06 AM

Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. Eisen

Hi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Software component with Key ID does not exist

Hi Friends,
           Here I am in need of your help. I got involved in an upgrade from XI 3.0 to PI 7.1. The Basis has imported all the SWC & Business systems from XI 3.0. When I am trying to activate the objects imported from IR of XI3.0 then It is triggering an error as
data retrieving failed from Adapter Metadata | RFC http://sap.com/xi/XI/System. /// ROA_MOA_NOTCOMPLETED.
            Because of this I am unable to activate the imported objects in ID by showing the message as Software component with key ID XXXXXXXXXXXXXXXXXXXXX does not exist.
            when I went there to ESR then under a software component I found a message under underlying components like             " XXXXXXXXXXXXXXXXXXXXX not exist" but I am not aware of the object related to that Key ID.
Please help me out in this . Thanking you in Advance.
Regards,
Sridhar

Hi Neeetesh,
         I got the alternative solution for my problem. All credit goes to you. I recreated the communication channels instead of using the same ones after Upgrad. Any way we need to change the communication channels after importing the channels but the system is giving the above error message as   "Adapter Software component with Key ID XXXXXXXX...... does not exist".
         But its allowing me to create a new channel. Then based on the neetesh suggestion, I went through and create the new comm channels instead of wasting so much time on the same issue.
        Thanks a lot Neetesh.
         I am really sorry for not giving your points. I am assigning points now with great pleasure. Here you go.
Regards,
Dasari.

Problem in importing software component

Hi
I created a software component,when i tried to import it into repository, i am getting following error
Communication with JMS server failed Repeat the last action. If the problem continues to occur after multiple attempts, contact your system administrator to check the availability of the JMS provider service
if i again try to import it i am getting following error
ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "/sapmnt/XID/global/security/data/SecStore.properties" does not exist although it should..
even if i am trying to import standard software components also i am getting above error,
pls suggest me what could be the possible solution
regards
raghu
Edited by: raghu y on Dec 29, 2008 10:19 AM

Hi,
the problem seems to be connection to the database or may be database URL is incorrect.
The problem can be solved via the Visual Administrator or by a manual modification of the data-sources.xml file.
Visual Administrator --> Server --> Services --> JDBC Connector -->Select DataSource
Change the URL given in the Database URL field with the appropriate one & save it.
For step by step process refer
http://help.sap.com/saphelp_nw04/helpdata/en/5c/2f2c4142aef623e10000000a155106/frameset.htm
Thanks
Swarup

Software component

Hi all,
could anyone give me some idea on what are the mandatory fields while we creating software component in sld( give me idea what is the UNIT field while we creatinmg SWCV)
regards
Joshi

HI Joshi
YOu mean to say Software Unit..
If yes Software unit is a particular aspect of the Product functions.It is a logical link between the product version and the software component version.
A product version consists of multiple software units. These units are implemented by various software components (or versions).
The product SAP R/3 Enterprise, which represents an SAP technical component, has, among other things, a product version SAP R/3 Enterprise Core 4.7. The software unit that represents the functions of this product version has the same description as the product version. Various software components (or versions) fill the functions of this software unit. These software components (or versions) are, among others, SAP Basis 6.20, SAP HR 4.70, and SAP Enterprise Retail 1.10.
To know more about Software Unit, please see page 30 onwards of the help file of SLD by going on this link:
http://<xiserver name>:<port>/sld/doc/sld.pdf
This help file will give you information about Software Unit if PI 7.0 is installed on your machine.
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

XI 7.0 Software Component on SLD

Hi,
i am new in using XI 7.0 based on NW2004s
i can not delete Software Component Versions i created,
remove buttom is disable. how can i delete SWC?
i can delete product, but not software component
when i create software componet, what is unit?
thanks
venjmain

Hi,
what state should i change?
i tried to change "develope" from "released", but same issue.
and when i selected some SWC SAP provieded on select screen, that SWC is getting into table control, but MY SWC i created, is not getting into table screen.
and how can i delete SWC I created? which is not getting into table screen so i can not delete it
i am missing XI 3.0, he he
does anybody has exprience?
thanks
venjamin?

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
                                    OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1.      Call the wizard-based configuration tool as described in Configuration Wizard.
       2.      Select the scenario PI and the task PIPostInstallProcess.
       3.      Choose Execute.
A list of the steps to be executed by the wizard is displayed.
       4.      Choose Install.

Software Component Vector in Modification Adjustment Transport

Hello all,
We are in the middle of a support pack project for our SRM system, and I've run into a snag as I prepare to move them into QAS. We've had this system for many years, and when DEV was originally installed in 2000 it was as a B2B 2.0a system. It was upgraded to 2.0b before GoLive, and the QAS and PRD systems were installed directly as 2.0b systems. The entire landscape has been upgraded several times in the twelve years since, and today it is on release SRM 5.0.
The problem is that the DEV system still shows an installed software component of NDI_ERM (Extended Relationship Management) in release 20A. Obviously that is actually long gone, but it still shows up in SPAM in the Display Package Level function, and under Attribute SAPCOMPONENT in the properties of all transport requests released from this system. It should have been passively deleted during the first (or subsequent) upgrade long ago, but for whatever reason that didn't happen. This software component never existed in QAS or PRD and does not show up in SPAM in those systems.
This hasn't been an issue in the past, and so I've just ignored it as I always had bigger fish to fry. I've performed upgrades and support packages for these systems without an issue, but we hadn't done any of these tasks for the past three years.
Until now.
I successfully installed support package stack 28 for SRM 5.0 into DEV a few months ago, and I performed the required modification adjustments in SPAU, creating the usual modification adjustment transport. Now, however, when I am trying to import the support packs into QAS, I have a problem when defining the queue, at the step for adding the modification adjustment transport. The transport is marked with a Software Component Vector that includes the defunct ghost NDI_ERM 20A, and NDI_ERM doesn't exist in QAS. SPAM finds the transport, but marks it with a red light ("Transport does not fit"). Drilling into details shows me that everything matches perfectly except for my ghost. On that line I get "The software component is not installed," and SPAM will not allow me to add the transport into the queue.
I should point out that I can import regular transports just fine, and I'm pretty sure I could just import the queue without the modification adjustment transport, and then import it manually when SPAM gets to the step about performing the adjustment. No doubt that would work, and that's almost certainly what I'm going to end up doing. But it bugs me that I can't fix this.
I have some thoughts about fixes that might work, and I'd like input on whether anyone else has dealt with (and solved) this problem before.
I think that I could probably just delete the line in DEV in table CVERS for NDI_ERM and so have it no longer show up in the attributes of future transports. That might solve the problem going forward, though it won't fix the mod adjust transport I've already released. Any thoughts about this?
I was able to get the existing transport to no longer show NDI_ERM in its attributes by deleting the appropriate line in DEV in table E070A. After doing that the transport looked fine in the STMS queue for QAS when drilling into its properties. However, this apparently isn't enough for SPAM. As I had already uploaded the transport in SPAM once, SPAM 'remembers' it and seems to have therefore cached its properties, including the NDI_ERM software component. I haven't been able to figure out how to get SPAM to 'forget' this transport so I could completely upload it anew and hopefully get new attributes that will then match the correct software component vector for the target system. Resetting the queue status doesn't do it.
Any thoughts on where (what tables) SPAM stores information about modification adjustment transports, and how to clear that information out? Any thoughts on the (admittedly drastic) measures I've mentioned above?
Thanks in advance,
--Matt

Hello,
SAP strictly forbids the modification of those tables for specific Add-Ons or even essential software component. As you do not really delete those products from a SAP system. This will only partially remove meta information from a SAP sytem. After the "reinstallation" the data and many other log files are still exists and may have some really inconvenient side effects in a SAP systems (inconsistent installation, incomplete database table conversion, problems regarding maintenance via notes and support packages, modifications cannot be reverted...) .
Additionaly it will be very difficult or even impossible to resolve upgrade or maintenance issues.
If you have any issue regarding an installation of a SAP product, you should contact the corresponding SAP support. They will provide you the right solution.
Currently SAP only provides for a small subset of Add-Ons the deinstallation.
Thanks a lot for your understanding
with kind regards,
Thorsten Scheyter (Development support)

Software Component in Integration Design

Hello,
I have just imported a software component for our IS-U system. Then I have created a namespace as well as a message interface. But when I try to locate this software component in the transaction "sproxy", I can't see it. The CPA cache causes sometimes trouble, but at the moment it has a steady state. It is also possible to add dummy namespaces to existing software component, these are displayed correctly.
Maybe this is a conceptual problem? Is it not allowed to create a proxy from an is-u software component on a netweaver system?
thank you very much,
Oliver

Hi Prasad,
thank you very much for your answer. I have activated all the changes in the int rep and I also checked my connection like you have suggested and still I can't generate the proxies for my new software component. Maybe this is really a conceptual problem, maybe it is not allowed to generate a proxy on a netweaver 04 system, that has not a IS-U.
I don't know.
Thanks
Oliver

UME Administration Software Component has no DCs in it?

Similar Messages

Maybe you are looking for