UME Direct Editing tab in 04S

Hi all,
How can I get to the direct edit tab for the UME configuration in SAP Netweaver Portal 04S SP12.
Regards,
Orlando Covault

Hi Orlando,
in 04s, no more direct edit tab.
You must use configtool to change those ume properties.
Brad

Similar Messages

  • Direct Editing tab not visible

    Hi
    I am working on EP 7.0
    In the System Configuration ---> UME Configuration I am not able to find the Direct Editing tab.
    Can anyone suggest me what to do to get the Direct Editing tab.
    Regards'
    Nikhil Bansal

    Hi Nikhil,
    the tab "Direct Editing" does not exist in EP 7.0.
    Read the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/e5/618a3eacd49076e10000000a114084/frameset.htm">UME Configuration</a> section in the SAP Library to find out how to configure UME configuration in NW2004s.
    Best regards,
    Martin

  • Direct Editing

    Hi Everyone,
    We have upgraded our NW04 to NW04s SP8, however we do not see the direct editing under system admin > system config>ume configuration.
    How do we access the direct editing function now?
    Thanks

    Hi Reyna,
    The recommended way of changing the UME properties is using the config tool. You can edit the properties using the config tool. Check this docu http://help.sap.com/saphelp_nw04/helpdata/en/0b/50ad3e1d1edc61e10000000a114084/content.htm
    Hope this helps.
    Akhilesh

  • Unable to view direct editing

    Hi Team
    Unable to view direct editing in the Um managent
    please guide me through the steps to activate it
    Thanks
    Madhu

    Hi Madhu,
    In EP 7.0 the Direct Editing has been removed and the same can find in config tool.
    Login into Config Tool, Select Server ---  services --- com.sap.security.core.ume.service and then edit the properties accordingly which requires portal restart to reflect it.
    Check it once and do let me know if you have any clarifications
    Cheers
    Venkat

  • Need help getting rid of Trovi virus on Safari and Chrome. Cannot use the instructions Apple sent because the copy command under the edit tab does not work.

    I use OS X 10.9.5. I have a trovi virus on Safari and Chrome. Yesterday I thought I had gotten rid of Trovi, but it's back on both my search engines. The directions Apple sent yesterday do not work; the copy function under the edit tab is grayed out and non-responsive. Can anyone help me to get rid of this virus? Thanks.

    Are you referring to these instructions?
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    If so, be sure to read the instructions carefully, and note that you will need to repeat the numbered steps in the Conduit/Trovi/SearchProtect removal instructions for each line shown, not all together.
    If those instructions aren't working for you, for whatever reason, try my Adware Removal Guide. It provides similar instructions, worded differently, as well as an app (AdwareMedic) that can help you do the removal automatically.
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Direct Editing Option in EP7

    In EP6 under system system admin -> system config -> UME Configuration
    There used to be a direct editing option where you could change location of branding image etc?
    Any idea where this is in EP7?
    Thanks
    Simon.

    Hi Simon
                          The recommended way to change these properties is using the Config Tool.
    Please have a lookj at the following for detials:
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/50ad3e1d1edc61e10000000a114084/content.htm
    And please follow this thread on exactly how to achieve this, in case you are unfamilliar with the Config Tool
    change of Branding image in Welcome page of portal
    Cheers.
    Please award points for helpful answers:-)

  • Unable to change Still/Freeze Frame Duration in User Pref Edit tab

    Process-selected new project, change Still/Freeze Frame Duration in user preferences on the edit tab.
    Need to change to 10 minutes. Typed in the field 00:10:00:00. When I hit ok, I get a beep and it defaults back to what was in there, 01:00:00:00. So tried a larger number 02:00:00:00. Same result. A beep.
    So went ahead with project and opened a sequence and tried to change it from the viewer. Same issue.
    Trashed prefs and started from scratch. Same issue.
    Ideas?

    Trashed prefs rebooted originally.
    Process as follows for trashing prefs. First time through I had opened a project. This time did not.
    Open Home Folder
    Open Library
    Open Preferences
    Delete com.apple.finalcutpro.plist
    Open Final Cut Pro User Data
    Delete Final Cut Pro 5.0 Prefs
    Delete Final Cut Obj Cache
    Delete Final Cut Prof Cache
    Run disk utility to repair permissions.
    Reboot.
    Did not open a project this time.
    Same issue but now I am able to put a slug in the time line and by selecting clip properties, can set the duration (was not able to do this before so some progress). Still can't set duration though as earlier described from edit tab on the user preferences page for still/freeze duration.

  • Why can't I find preferances in the edit tabs drop down menu?

    Although I had Indesign CS6 for over a year this is my first time using it . I want to set the default page size to inches, instead of using Indesigns default settings.  Following Terry Whites instruction From the video clip on YouTube I tried finding Preferances in the Edit tabs menu, But when I click on the edit tab I can't find preferances in the drop down menu. What am I doing wrong or what am I not doing. sombody please help me to change this setting. I know nothing about the measurement type that indesign uses as a default.
    Thank you, For your answers.
    laverne 

    If you use a Mac they'd be under the InDesign menu....

  • Where is the editing tab in iMovie HD?

    when i open iMovie HD and am working in my project... i don't see my editing tab next to clips.
    at the bottom of the frame all it says is clips, photos, audio, titles, trans, effects, idvd.
    i don't see the tab that says clips, themes, media, editing, chapters.
    is there a toolbar that i'm missing?

    Does your toolbar look like this:
    Or does it look like this:
    iMovie HD 6 is the top bar and the bottom bar is iMovie '11. Also you can go to the iMovie Menu and choose about iMovie and read back the version number it reports there.

  • How can i change the direction of tab canvas in 10g ?

    hi all
    how can i change the direction of tab canvas in 10g at runtime i want to change the direction from left_to_right to right_to_left when i did that the form not appears well
    all prompts of item not dispalyed in order of its sequence ,in spite of that it works in 6i well and change direction without any problems
    i have been used set_canvas_property and set_view_property but it doesn't work
    can anybody help me in this mater?

    please can any body help?

  • When I try to launch the edit tab, I get a error message to close restart my computer and try again.

    When I try to launch the edit tab, I get a error message to close restart my computer and try again.

    The editor saved prefs often get corrupted. This is because PSE saves your settings each time you close the application. Problems can sometimes occur if you don’t let the program close properly or if you launch another application too quickly whilst closing down Elements. You may need to rebuild the editor preferences to resolve any conflicts. To begin, close Elements.
    Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. After a few seconds release the three keys and look behind the welcome screen by closing it. Alternatively hold down the three keys whilst  clicking on the desktop icon for the Editor or PhotoshopElementsEditor.exe in the Programs folder. Keep holding down all three keys for a few seconds; then release. You should get the settings option.
    When you see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
    Click on Yes
    Then wait whilst Elements rebuilds the preferences.

  • Edit Tab Order Bug??

    I've upgraded from CVI 8.1 to CVI 2010 a short while back, and while working on a project recently, I noticed that the Edit Tab Order functionality no longer seems to work properly.  I still have 8.1 installed on the same PC.  If I open an old project in 8.1 and edit tab order, everything works just fine.  I can set a value in the "Click to set" box and point to the control that I want to set and the value is applied.  However, if I do the same thing in CVI 2010, when clicking on a control that I want to set, the value is NOT set and the other control tab order values get all screwed up.  I've seen the issue on a 64bit Windows 7 Laptop as well as a 32bit Windows XP computer.
    Is this a known bug??  I haven't seen it mentioned anywhere.  Should it be reported someplace else?   This essentially makes the Tab Order functionality useless, and is a bit frustrating on a panel with a large number of controls.
    Thanks!

    I figured out my issue, and it is actually consistent in both v8.1 and 2010.  The issue is that I have a Decoration Frame around a group of controls.  When previously testing in v8.1, I did not have a frame around the controls.  That's why it worked. 
    So... Once a frame was inserted (in either version of CVI), any controls that the frame surrounded could no longer be selected in the Edit Tab Order window.  Selecting ANYWHERE inside the frame only selects the frame tab order and NOT any control inside the frame.  After a little trial and error, I found that this was related to the Z-Plane order of the frame.  The frame is a bit misleading in that all the controls are clearly visible inside, but the frame still lies ON TOP of them.  Once I selected the frame and "Arrange>Control ZPlane Order>Move to Back", I could then edit the tab order of the interior controls as expected in the Edit Tab Order window.
    Sorry for any confusion.  Hopefully my little snafu might help someone else at some point in the future.

  • "EDIT" tab option missing from the top bar

    I have a weird thing happening: Several times a day the "EDIT" tab on the top bar of the main Final Cut page disappears. This is in the top bar that normally says, "FILE EDIT VIEW MARK MODIFY" etc.
    When I close Final Cut and restart, the "EDIT" option appears again.
    I'm using FC Studio 6.06 with OSX Leopard.
    Anyone else have this problem. It just started about a week ago.

    First thing to do...
    Deleting FCP Preferences:
    Open a Finder window. Set the view mode to columns:
    Click the house icon that has your name next to it.
    Click the folder "Library" in the next column.
    Find and click the folder "Preferences" in the next column.
    Find and click the folder "Final Cut Pro User Data" in the next column.
    Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
    When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up.

  • Why are commands "grayed out" on edit tab on Elements 9?

    Why are commands "grayed out" (not available) on the edit tab on Elements 9?

      It’s often awaiting a user action e.g. opening a photo in the main Editor space or making a selection or a new layer or flattening an image or changing bit depth etc.

  • What mac app will allow "direct editing" of an mp3 w/o recompressing?

    the issue is that I'm using a low quality (poor mic) low resolution file (32kbps--which for lectures is doable) and need to edit it significantly. i have previously tried soundtrack pro 2, converting it to aif, editing, tried some processing to see if I could improve listenability, with some success... but when it is compressed back to mp3 at a reasonable resolution for download(these clips are 45mins plus in length), it introduces a lot of unwanted noise. even with all processing removed, leaving me with the original upconverted/edited file to recompress, I'm still unhappy with the results. so I figured I should find a program that would allow me to directly edit the mp3 file and then save out the changes. after googling, I thought Audacity might do this, but no advantage over STP.
    apparently, windows has mp3cut and linux has WINE... if there a mac equivalent.

    i'm short on time, but basically the problem is not that simple. converting a low quality/low resolution to AIFF will give you the same quality of sound as the original low quality file. once you begin editing the file it will require recompression to go back to mp3. recompression can retain the same listening quality provided you keep the resolution high enough, which then results in a much larger file. these files are long (45+ mins each) which make them larger than wanted. by being able to edit the mp3 directly, it doesn't require recompression, it simply removes the unwanted data and keeps the unedited data the same. it would be like using an mp3 splitter application, only you are making many edits. i can see this as doable and mp3trimmer might work if i can get it to show the waveform large enough to do the edits. I'm told there is a PC version which i am going to try, just to see if it will do the editing that i need to do, in which case I will be loading windows on my machine.

Maybe you are looking for