UMI-7772 position power connector part number

We lost an UMI-7772/7774 4-position power connector (power input connector for V, C, Viso and Ciso). Anybody knows what is its part number and manufacturer?
Ben64

fblerg wrote:
Hi Ben,
The power connector is a Mini-Combicon 4 position connector. The part number is 761785-01. You will have to call the Service Line to get pricing and availability. You can get these from Digikey, which might be a better option for these.
http://www.digikey.com/product-search/en/connectors-interconnects/terminal-blocks-headers-plugs-and-sockets/1442750/page/2
http://www.digikey.com/catalog/en/partgroup/combicon-fk-mcp-series/2933
Hi Frank, thanks for the answer. The 761785-01 link is not working (probably only available to NI employees) and a search for 761785-01 on the NI website returns nothing found.
Ben

Similar Messages

Power Adapter Part Number

Have a HP G63-355DX (HP Product #XH068UA#ABA) that is missing the AC Power Adapter to charge the unit. I have found the specifications listing for the unit, but not the HP part number or the HP spares part number. The adapter is a 65W, 18.5V and possibly PA-1650-02H is mentioned when I try searching.
Can you provide the HP part and Spares (typically ending in -001) for this unit?

Hi,
You can officially use any of the following three references:
609939-001 AC Smart pin slim power adapter (65-watts) - Requires separate 3-wire AC power cord, non-Power Factor Correction (nPFC)
693711-001 Smart AC power adapter (65 watt) - Non-power factor correcting (NPFC) - Requires separate 3-wire AC power cord with C5 connector
613152-001 AC Smart pin slim power adapter (65-watt) - 100-240VAC 1.7A input, 50-60Hz, 18.5VDC 3.5A output - Does NOT include power cord - Does NOT include dongle for use with older, non-Smart compatible notebook PC's
http://partsurfer.hp.com/Search.aspx?SearchText=XH068UA

I need the Lotes (or HP) PCI-e edge connector part number to replace it on a H8-1360t

The PCI-e graphics processor in my H8-1360t was pulled without releasing the tab on the edge connector first. As a result, the plastic connector pulled free of the fingers. The PC is long out of warranty and this would not be covered by warranty anyway.
This leaves the PC inoperable as the plastic housing cannot be pushed back on to the fingers. So the motherboard will have to be removed and the PCI-e edge connector replaced.
The connector is made by Lotes, but has no part number on it. I need a part number in order to obtain a replacement. As far as I know, there is no part-specific tech manual for the motherboard that I could refer to for this information. It would have to come from someone at HP.
Help.
This question was solved.
View Solution.

A difficult search for the part.
http://www.ttiinc.com/object/fp_fci_pci.html http://www.farnell.com/datasheets/188358.pdf
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

DC Power Jack part number Satellite M105-S3041

Greetings,
My Toshiba laptop (M105-S3041) seems to be having a lot of problems with the power.
My OEM Power adapter broke and i bought a replacement (non OEM) from ebay.
That has been working fine till about a month ago I started having problems charging my laptop.
I believe the power adapter is working fine (as the light on the adapter lights up) and I may be having a problem with my power jack.
I have been searching for the model / part number for the DC Power jack without any luck. Would someone please help me out with the correct model/part number, where to buy and the approximate price for it?
Secondly, does anyone know if the power jack is plug 'n' play or does it need to be soldered into the mother board?
I have been pretty good at dis-assembling the laptop and putting it back together (except for one damn screw that does not agree to come off, I will probably saw that guy off).
Thank
Ajay

Hi
Im not quite sure but I think the DC-in socket is soldered to motherboard.
In such case it would be tricky procedure in order to replace this.
But it seems that you are not 100% sure that this part malfunctions.
It could be also the AC adaptor issue as you said, you bought an not original part.
Its just a suggestion but I would try to replace the AC adaptor with an Toshiba recommended one before trying to disassemble the notebook and to replace the DC-in socket.
PS: All parts can be ordered from local Toshiba ASP!

Power cord part number for Officejet 4500

I have lost the power cord to my OfficeJet 4500 wireless printer, Prod #CQ663A#1H3 and need an orderable HP part number? Does such a number exist?? Please help.....

Hi,
The power module and power cord can be ordered from following link.
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=525263ED17684FD4B7127D173B4B85E8&Searc...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Replacement TC Power Cable part number

We are moving to the USA and need to get replacement power cables for our Mac equipment. Is there a part number available for the Time Capsule US power cord please?
Thanks

I tried this for our Magsafe power supplies for our Macbook Pros. The Apple store said we would have to by the whole Magsafe power supply. I have found the US power cables for the Magsafe PS on eBay. But they are coming from China
Thanks

Xav 701hd 16 pin amp connector part number

Please help me. I need to order this but I can't find a resource for the part number

Hello Ipdaily,
I assume you are referring to the main (16pin) power harness for which the part number is 1-839-376-31.

Power supply part number for Cisco 2900

I need to know what are the part numbers for installing the redundant (second) power supply.

Hi,
Have you tried sh inventory.
I am able to see with same command on some different platform
#sh inventory | inc Power|SN
NAME: "slot 24", DESCR: ***** AC Power Supply"
PID: 34-0820-01 rev B0 dev 0, VID: V01, SN: CAB014501HN
Regards
Mahesh

Satellite M50-159: What is the part number of the origanal AC power adapter

My power adapter has broken and up until now i have been using a universal adapter but the connection is loose and takes a while for the orange light to turn on.
My question is what is the part number of the original AC adapter that came with this laptop. I have just ordered what i thought was the correct power adapter part number was PA3468E-1AC3 but the connecter did not fit into my laptop even though the toshiba website said this power adapter was compatible.
Please help
Alex

Hi dear friend,
you had the wrong partnumber. What you need is PA3283U2ACA (K000028790) which is the right one. Heres a link where you can check the connector of the AC-adapter:
http://www.sparepartswarehouse.com/Toshiba,Laptop,Part,K000028790.aspx
I hope you will get what you need. :)
Greets

Satellite Pro A10 - need a part number for compatible power adapter

My son has the older Toshiba Satellite Pro A10 Intel Celeron 2.0GHZ 256MB 30 GB DVD/CD-RW 14tft monitor.
His power supply is no longer working , can anyone tell me the power adapter part number as i am looking for a new one for him.
I need a part number to go on, and any other compatable power adapters numbers.
Appreciate any help given.
Thanks
jane

Hi Jane,
I believe the part number you need is PA3283E-2ACA
Check it out on the following link :-
http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&pro duct_uid=64945&_LOC=UK

What part number for storEdge power cables?

I purchased a used StorEdge cabinet like the one pictured below.
[http://imgur.com/kdnNM.png]
No cords were included. I'm wondering:
1. What part number is the external power cord? (red circle)
2. What part number(s) fit the internal power connectors
3. Would the power output of the internal connectors be sufficient/correct to distribute power to various non-sun servers?
4. What is the purpose of the connections in the blue circle
Thank you in advance for your help.

You are welcome.
This is peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP. I suggest contacting HP Customer Service to see if the part is available. I couldn't find it anywhere.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP Docking Station EN488AA - part number for power adapter

Hi,
I have a HP Compaq nx8220 notebook, with a HP Docking Station (EN488AA).
Unfortunately I have lost the power supply for the docking station.
I still have the power supply for the notebook itself (393955-001) but it does not plug in to the docking station. It is the correct voltage but only 90W instead of 120W, and the connector is the wrong size.
I've been looking online for the part number for the correct replacement power supply for the dock, but became very confused when I found sites advertising the same replacement part for both the nx8220 and the EN488AA when clearly they are different because the plugs don't match. None specify the plug size so I don't know which is which.
Can anyone help me identify the correct replacement part? Or better still, is there a plug adapter available so I can use my existing power supply for the dock too?
Attached are two photos - the plug from the power adapter next to the inlet of the notebook (fits) and the dock (doesn't fit).
Thanks,
EddieD97
This question was solved.
View Solution.

The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
In the picture observe the component in left hand bottom corner.
http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
I would say, take the adaptor to store and get one.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

On the connector block CB-68LP, there are few screw terminals. I am trying to find the maker and the part number of this screw terminal. Any help is much appreciated.

I am designing a new product to use in our environment and I am trying to go from the I/O card to the PCB eliminating the connector block. For this purpose, I need to find out the screw terminal part number as well as the makers name. Please help.

The screw terminals are made by Phoenix:
The 14 screw terminal row is P/N 18-69-33-4
The 12 screw terminal row is P/N 18-69-31-8

What is the HP part number for the power adapter shipped with the dv7-6b32us?

I would like to know what is the exact HP part number for the 90w power supply that is shipped in the box with the DV7-6B32US?

Hi,
Here is another list:
http://www.amazon.com/s?ie=UTF8&rh=i%3Aaps%2Ck%3AHP%20Pavilion%20dv7%206b32us&page=1
I would buy the 120W charger.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Correct part number for G4 MDD power supply

I am in the process of replacing my old Power Mac G4/350 with a G4 MDD 1.0 ghz DP.
The power supply is missing from the MDD unit. Does anyone know what the correct
part number for this power supply?

http://natramelec.com/g4powersupply/
Part Number: 661-2816, 661-2816-R, 661-2725
Manufacturer part: API1PC36
Apple assembly: 614-0224, 614-0183
Product EEE Code: NS3, P0V, P0W
http://www.welovemacs.com/6612816r.html

UMI-7772 position power connector part number

Similar Messages

Maybe you are looking for