Umi-7774 power is not working ( request help urgently)

I have a umi-7774 and a pci-7340 controller, and they were working well, but suddenly when i try to turn on the umi-7774 again, the isolation power led was illuminated but the power led itself didn't illuminate, it only illuminate at the first contact of power supply, so i hope you can help me solve this problem as soon as possible.

Thank you for your reply, even it is late but anyway thank you, the problem was in my battery that supply power to UMI, since i go to the supplier office here, and the engineer there powers the UMI by a power supply with him, and the umi works properely, but what confuse me that when i measure the voltage out from my battery the voltage was 24V, and the current also was high, so i donnot know what is the problen with my battery
your sincerely,
ni-motion

Similar Messages

IPad activation not working please help Urgent

iPad activation not working, I got this message "this ipad is currently linked to an Apple ID, sign in with the Apple ID that was used to set up this iPad. I enter my icloud account and user name to the computer and its ok, but not working for ipad

See if these Apple Support documents help you ...
https://www.apple.com/support/appleid/
Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
http://support.apple.com/kb/ts4515
If not those, then go to Apple Support for some official Apple Support help ...
Apple Support
http://www.apple.com/support/
Apple Retail Store - Genius Bar
http://www.apple.com/retail/geniusbar/

CALL Transaction in background not working pls help URGENT

hi i have writtin a bdc program which uses CALL TRSANCTION everything is working in foreground.
if i schedule the program in background the call transaction does not work. any idea why?????????
pls help its urgent

hi
good
have you checked in the debug mode, if you have checked in the debug mode check wheather it is giving any error before data is displaying in the screen, if any error is displaying as a message than check that error why it is coming there.
If no error is coming than check your flow of the bdc screen in the debug mode , there must be some prob, so that it is not working in the background.
thanks
mrutyun^

Ip SLA failover config not working need help urgent cisco 2911 K9 router

Hi,
I am setting up failover wan for one of my cient and seems everything i have configured correctly but its not working. For track i am using google DNS ip 8.8.8.8 and 8.8.4.4 where if i ping 8.8.8.8 from router it pings but not 8.8.4.4. I I think because 8.8.4.4 no pinging so router does not jump if primary gigabitethernet0/0 down.
Not sure what i am doing wrong. Please find below config details:
-------------------------------------------config-----
username admin privilege 15 password 7 XXXXX
redundancy
track 10 ip sla 1 reachability
delay down 5 up 5
track 20 ip sla 2 reachability
delay down 5 up 5
interface GigabitEthernet0/0
ip address 122.160.79.18 255.0.0.0
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 182.71.34.71 255.255.255.248
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface GigabitEthernet0/2
description $ES_LAN$
ip address 200.200.201.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source route-map giga0 interface GigabitEthernet0/0 overload
ip nat inside source route-map giga0 interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 track 10
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/1 track 20
ip route 8.8.4.4 255.255.255.255 GigabitEthernet0/1 permanent
ip route 8.8.8.8 255.255.255.255 GigabitEthernet0/0 permanent
ip sla 1
icmp-echo 8.8.8.8 source-interface GigabitEthernet0/0
frequency 10
ip sla schedule 1 life forever start-time now
ip sla 2
icmp-echo 8.8.4.4 source-interface GigabitEthernet0/1
frequency 10
ip sla schedule 2 life forever start-time now
access-list 100 permit ip any any
access-list 101 permit ip any any
route-map giga0 permit 10
match ip address 100
match interface GigabitEthernet0/0
route-map giga1 permit 10
match ip address 101
match interface GigabitEthernet0/1
control-plane
------------------------------------------config end

Hello,
as Richard Burts state correct the nat configuration is not right. But the ICMP echo request for the IP SLA is traffic, which is generated from the router with a source-interface specified. There shouldn't be any NAT operation at all, or? Iam using IP SLA for two WAN connections too, but I can't recall ever seen an entry for the icmp operation in the output of sh ip nat trans.
To me the static route configuration looks wrong too. As far as I remember it's necessary to specify a next-hop address (Subnet/mask via x.x.x.x) on Multiple Access Broadcast Networks like ethernet, otherwise the Subnet appears as directly connected on the routing table. The configuration "ip route subnet mask <outgoing interface> only works correct for p2p links. With the configuration above i would say there is no routing at all possible except for "real" direct attached networks. Vibs said it's possible to reach the google dns 8.8.8.8 but not the second one 8.8.4.4. I verified that 8.8.4.4 usually answers to ICMP echo-request.
My guess is that the next hop for the gig 0/0 interface has proxy arp enabled but the next hop for the gig0/1 interface hasn't proxy arp turned on.
kind regards
Lukasz

IPod Touch Sleep/Power Button Not Working! Help!

I have the new iPod Touch 32 GB and I got it in September. Since yesterday it started lagging with the button: When I push the sleep button to put it to sleep it waits 5-10 seconds and asks me to move the slider to shut down. Its like the button is stuck inside or something. Does anybody else have this problem? What should I do?

I have a 3g iPhone 32gb and this is happening with me as well. Actually, the darned thing freezes all the time (see my reply in the "Unresponsive" discussion: http://discussions.apple.com/message.jspa?messageID=10981942#10981942).

Adobe flash player not working- need help urgently

Hi
I hope somebody would help me
I have windows vista home premium, where few months back when I was using the computer it came for a message requesting me to upgrade my adobe flash player to version 10. which I did and its the biggest mistake
Eversince then I cannot access any videos and the some audios as well.
where I visited adobe website and followed the instructions to uninstall the flashplayer and reinstalling,
but nothing worked so far, hence I'm unable to view y-tube or any other related videos at all.
I checked the files in c:\windows\system32\macromed\flash and I have only below mentioned two files
flash10e.ocx
flashutil10e
If somebody could help me on it I would truly appreciate it as I need the flash player urgently for my work.
cheers
Himali

Hi Himali,
Thanks for the info. Following is the information you need to do. Download and SAVE to your Desktop the Adobe Uninstaller: http://kb2.adobe.com/cps/141/tn_14157.html Select the one for Windows.
Then you will download and SAVE this Installer to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
After you have done that, then you need to follow these steps.
1. Disconnect from the Internet
2. Right click on the Trend Micro icon in your system tray and disable/turn off the Anti-Virus and the Firewall
3. Check the system tray (that area by the clock) for any icons(applications) that use Flash and disable them.
4. Go to Tools, and click on Internet Options. Click on the Security Tab and set it to Medium for the Internet Zone.
5. Close all browsers so you are only looking at your Desktop
6. Click on the Uninstaller on your Desktop and RUN it. When it is finished, Reboot(restart) your computer. When it is fully
rebooted, then Reboot again. This is needed to make sure all old Flash files are removed.
7. Now you will check Trend Micro and the Firewall to make sure it is still disabled. If it isn't, then disable both again.
8. Click on the Installer on your Desktop and RUN. When finished, Reboot Once.
9. Check Trend Micro and enable it and the Firewall now.
10. Re-connect back to the Internet.
Go here to the Adobe test site: http://www.adobe.com/products/flash/about
You may want to print these instructions out to make it easier for you to follow. If you have any questions before you start, please ask.
After you are finished, post back your test results and I will give you some info to check your Flash files.
Thanks,
eidnolb

Mail not working need help urgent!!

I install os x leopard and every time I try to get in to mail a message come up telling me the following:
You can't use this version of the application Mail with this version of Mac OS X.
You have Mail 3.6.
and I cant find the new version please help!!

deleted previously imported key chain originated from the previous system (why doesn't apple provide a migration for my key chain?). after the deletion mail can receive and send again and dreamweaver starts without hanging.

HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

Are you connecting your iPhone directly to your PC or to a USB hub?

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac

Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.

The click at touchpad is not working, please help!!!

I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill

Bootcamp 5.1.5621 - power saving not working

I've this mac: iMac 27 - mid 2010 - 11.3 : S/N CK0390HUDNR - Boot Rom IM112.0057.B01 - EFI 1.8 SMC 1.59F2
With latest bootcamp, power saving not working !
I enable the display power off after 10 minuts
Display power off BUT there's no way to power on !
Apple... any help ?? (hoping some apple tech looking discussions..)
Regards
Mauro

look on the page
it list which macs the zip support
if yours in not on the list use
is it on the list? Boot Camp Support Software 5.1.5621
or is it on this list Boot Camp Support Software 5.1.5640

TS1398 I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

A reset has nothing to do with Internet access or data access.
A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
What are you really trying to do?

Umi-7774 power is not working ( request help urgently)

Similar Messages

Maybe you are looking for