UML Entry menu doesn't exist

Hi all,
How to create UML diagram class ? I downloaded the lastet Jdeveloper and can't find UML entry in File-> New menu
Thanx

Did you download the Java Edition?
Only the full Studio Edition contains UML features.
If you have Studio then in the New Gallery on the All technologies tab UML appears under General - UML
Thanks,
Geoff

Similar Messages

Error while passing data to custom screen. Entry MUM doesn't exist in T001P

Dear All,
I have created a custom screen for PB10. I am getting below error while executing the screen.
Entry MUM doesn't exist in T001P (Check Entry) .
The detail error is
Entry MUM does not exist in T001P (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table T001P. The value or values ' MUM ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
I've checked the table and data is available. But still i am getting this error.
I've come across this error earlier while copying standard screen to custom screen.

The solution to this problem is you have to set your SET and GET parameter in the properties tab of the field.
regards,
sandeep

Error:Check table 158:entry COR6N doesn't exist

Dear PP Gurus
When i am trying to do confirmation( COR6N) an error is coming "<b>Check table 158:entry COR6N doesn't exist</b>".
Can u pls suggest why this is happening...........???
Regards
Ragesh

Dear Padosh/Murugesh
By mistake...i had given full points...
Mr Pradosh only first suggested that sol'n, so Murugesh i have given to u vry helpful answer
Regards
Ragesh
null

Push-to-talk menu doesn't existe on Nokia 6300

Hi everybody and sorry for my english, 'cause i'm french speaker most of the time. i'm the owner of new 6300 Nokia with un old Orange Contract.
1: so i've got this new 6300 nokia model yesterday (after i changed another one who wasn't recognising my sim card)witch seems to miss this push-to-talk menu: what semms to be the problem, cause in the user guide it is?
2: in the same time i didn't find where we can check the level of the baterrie, ...if it exist;
3: can we change the ring tone of the amarm clock? if it is so where?
Thanks, Janyjane

Hi janyjane I think for the push to talk function you need to phone your network up and ask them to activate it. As for the battery life i don't know of any other way to check it Only the top left corner. As for the alarm tone if you go into where your music is (ie) your memory card go to your music scroll down to the tune you want and go into options scroll down to use tone and select alarm from the list. Hope this helps. Cheers Andy

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application

"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application. what should i do? help me.. =(
hopefully i can running my photoshop cs4 on Rosetta coz some plugin need rosetta to work. thanks..

xvolution_lp wrote:
macbook aluminium unibody mac snow leopard 10.6.4. i've already installed rosetta in my mac. i think this problem happen caused other software (CleanmyMac) . i've run the app and i think the app(cleanmymac) remove the universal binaries. what shoul i do?…
I'll assume that's a Mac-Intel machine, as I'm not familiar with macbooks or laptops in general. Obviously, if it were a PPC you would not need Rosetta in the first place.
Well, here's what I would do:
I'd re-install CS4 in the hopes that will solve the problem;
Second, I'd stop listening (and probably even speaking) to the misguided soul who recommended CleanmyMac to me;
Third, delete all traces of CleanmyMac; and
Fourth, I'd reinstall the OS and all applications on my machine.
But that's just me.
Wo Tai Lao Le
我太老了

Menu feature doesn't exist in Captivate 4??

It looks like the menu feature (in the skin editor window) doesn't exist in Captivate 4. Does anyone know how to make drop-down menus in Captivate 4?

Hi there
In Captivate 4 this changes to Table of Contents.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

How to I get rid of an "Open With..." option that doesn't exist?

I've tried to find out how to remove an element of the "Open With..." options but don't seem to be getting much traction. I have an old application listed in the "Open With..." pull down menu that doesn't exist anymore, but when I select the file, using command-i, to change which application opens the file, it works for that file. I want to change association using the "Change All" button, but when I do that, the "dead" application becomes the default application again and I'm back to square one. Is this fixable? How do I get rid of the useless option? Will I have do do this for each file?

your link gave me a good starting place...
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -R -all -domain local -domain system -domain user
this seemed to do the trick... I would have never have solved this without your suggestion.
thanks.

Why is my Firefox Aurora seems to be located in Program Files (x86)\Aurora\updated\firefox.exe, but that directory doesn't exist on my computer?

I'm using FusionDisplay to get a taskbar for my second monitor, and the taskbar has worked well until now. Now when I open pinned Aurora, it opens a new application and doesn't merge with the pinned down application icon.
It seems to locate the Firefox.exe to Program Files (x86)\Aurora\updated\firefox.exe, which doesn't exist. Also windows task manager right click menu for firefox.exe won't open anything when I click Open File Location.

Hi. I'm having the same problem with Final versions of Mozilla applications (FF and TB) on Win7 x64 as well. I don't have Display Fusion or the likes.
This started around FF15, and happens about every other update since. This is Very frustrating. Restarting the computer fixes it though. I'd never believe I'd have to restart the computer after pretty much about every update, major or minor. Now this happened to me for both FF19->19.02, and TB 17.0.3->17.0.4 at the same time. No other software running meanwhile.
This happens for about the 3 or 4th time. It's frustrating to have to restart every now and then for a browser update.
I'll stick to a version for both (19.0.2 and 17.0.4) forever, thanks Mozilla! Couple that with the inability of most versions of TB to sustain a longer uptime than 10-15 days with no addons and just 4 pop accounts with 50-100 emails and just one with 1000.

Form doesn't exists after calling driver program

Hi,
     I had created a invoice form, and i called through driver program in se38.After executing i m getting as 'Form doesn't exists'.
'zinvoice1'   is the name of the smartform.
Code as follows:
REPORT ZINVOICE1.
tables: kna1,vbrp,vbrk.
parameters: p_kunnr like vbrk-kunag,
            p_vbeln like vbrk-vbeln.
data : fm_name type rs38l_fnam.
data: t_vbrp like standard table of vbrp,
      t_vbrk like standard table of vbrk.
data: fs_kna1 type kna1,
      fs_vbrk like line of t_vbrk,
      fs_vbrp like line of t_vbrp.
start-of-selection.
select single * from kna1 into fs_kna1
       where kunnr eq p_kunnr.
select * from vbrk into table t_vbrk
        where kunag eq p_kunnr and vbeln eq p_vbeln.
select * from vbrp into table t_vbrp for all entries in t_vbrk
         where vbeln = t_vbrk-vbeln.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      FORMNAME                 = 'zinvoice1'
    VARIANT                  = ' '
    DIRECT_CALL              = ' '
   IMPORTING
     FM_NAME                  = fm_name
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION '/1BCDWB/SF00000050'
EXPORTING
    ARCHIVE_INDEX              =
    ARCHIVE_INDEX_TAB          =
    ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         =
    MAIL_APPL_OBJ              =
    MAIL_RECIPIENT             =
    MAIL_SENDER                =
    OUTPUT_OPTIONS             =
    USER_SETTINGS              = 'X'
      IM_FS_KNA1                 = fs_kna1
      IM_T_VBRP                  = t_vbrp
IMPORTING
    DOCUMENT_OUTPUT_INFO       =
    JOB_OUTPUT_INFO            =
    JOB_OUTPUT_OPTIONS         =
    TABLES
      IM_T_VBRK                  = t_vbrk
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZINVOICE1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IM_FS_KNA1 = fs_kna1
IM_T_VBRP = t_vbrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
IM_T_VBRK = t_vbrk
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

[svn:bz-trunk] 21277: Added ds-console source to package-oem and removed copy command for datavisualization .swc which doesn't exist in the specified location.

Revision: 21277
Revision: 21277
Author:   [email protected]
Date:     2011-05-18 11:35:28 -0700 (Wed, 18 May 2011)
Log Message:
Added ds-console source to package-oem and removed copy command for datavisualization.swc which doesn't exist in the specified location. I do not find it in the most recent package-oem.zip neither
Modified Paths:
    blazeds/trunk/build.xml

Gusar wrote:No, it's not. I have actually seen cases where software rendering gave a higher glxgears score than hardware rendering (and no, it wasn't about vsync). Of course, with *actual* apps on the same machine, software rendering sucked compared to hardware rendering.
Please do not jump to conclusions and make assumptions here like 'when will people finally get it??'. I never said it was a benchmark. I have also seen many examples of where it's results do not go with conventional performance. I have a Radeon 9000 that goes faster on glxgears than a Geforce FX 5600 running Nouveau. Which is the faster card? The FX by miles. It is not a benchmark as it can not be compared between configurations. What I know is that on this individual system, from prior experience over many years when 3D acceleration is working glxgears gets between 300 and 400 fps. When it is not working it gets less than 10. That is a fact but does not mean it is benchmarkable. Yes, a Quake 3 timedemo (I have these numbers too and they very much correlate to glxgears performance for this system given just how slow it is) would be a benchmark but when it runs less than 0.1fps and even the 2D rendering means that navigating the menu is impossible, there just isn't the time to find out. Hence if playing around with drivers on this system I would use glxgears to check that 3D acceleration is working but not to benchmark. Glxinfo does not give you all this evidence.
But to clarify, I wouldn't use glxgears as a benchmark, benchmarking is different and I do a lot of that too.

Funcition module EXIT_SAPLMR1M_004 doesn't exists in ECC 6.0

Hi,
We are in the middle of an upgrade project from R/3 4.6C to ECC 6.0.
Actually we have a critical business process validation in
EXIT_SAPLMR1M_004 (include ZXM08U34) corresponding to enhancement
LMR1M001, but in ECC 6.0 this user exit doesn't exists and can't be
created because system send the following message:
<b>"EXIT modules are no longer supported
Message no. FL049
Diagnosis
As of release 5.0, the concept of SMOD/CMOD is not longer supported.
For this reason, no new EXIT modules and groups can be created.
Procedure
Use BADIs instead of EXIT modules."</b>
Do you know if there is other user exit or BADI instead of EXIT_SAPLMR1M_004?
Many Thanks

Hi,
check OSS Note carefully:
https://service.sap.com/sap/support/notes/459425
This note says:
In Release 4.7 user exit 'EXIT_SAPLMR1M_004' is replaced by a Business Add-In (BADI) 'MRM_WT_SPLIT_UPDATE'.
Read with attention the documentation of the badi as well.
Regarding this badi MRM_WT_SPLIT_UPDATE check OSS Note:
https://service.sap.com/sap/support/notes/1156325
Important: this note says:
An active implementation of this BAdI excludes the manual entry of the withholding tax base and amount.
Best regards.
Edited by: Pablo Casamayor on Aug 17, 2009 6:12 PM

Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?

I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
TIA.
Pauline

Amasis wrote:
On ML there's no plist file for Mail, so nothing to delete there.
~/Library/Containers/com.apple.mail/Container.plist
(Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML)

[Solved]Boot from USB HDD - Root device doesn't exist. Major/minor

My problem is that the kernel seems (or starts) to load, but then I get an error:
Root device 'UUID=1234 . . .' doesn't exist.
Attempting to create it.
ERROR: Unable to determine major/minor number of root device "UUID=1234 . . .'
You are being dropped into recovery shell
I found a few links on the web and in the forums, but nothing that really solved it for me. The solved ones usually downgraded the kernel. I haven't done that yet. I thought I'd try here first.
I have a 320GB USB HDD that I have been using to experiment with different linux distros. I have a few working successfully (OpenSUSE,Mint,Ubuntu,Debian,Fedora,etc). I'm very new at this but have been reading a lot and putting a lot of time into it. I have legacy grub loaded on the MBR and use the menu.lst on my openSUSE partition to boot everything. Because the partitions for some of the distros are so far into the disk I needed to create directories on openSUSE's /boot directory to contain the kernel and initrramfs files (like /boot/fedora). This seems to work for the other distros. I did the same thing for Arch.
So when I installed Arch I haven't used the bootloader section of the installation.
I'm using the 2011.08.09-netinstall-i686.iso Live CD.
I tried a few things including:
1. changing the HOOKS in /etc/mkinitcpio.conf
a. adding usb to the "HOOKS"
b. removing and adding autodetect
c. adding and removing "sata_sil" (although I'm not even sure if my device uses it)
2. changing the kernel line:
a. from using "UUID=" to (hd0,1) to sdb1.
b. added rootdelay=8
3. repartition all of my arch partitions using cfdisk from my Live CD and reinstall. I used gparted on OpenSUSE to do it the first time.
This may be connected. When I fdisk -l from the Arch Live CD I get extra data and an error for each of my arch partitions (and only my arch partitions):
Disk does't contain a valid partition table
When I fdisk -l from OpenSUSE I don't get the data paragraphs or errors about the arch partitions?
Here is my /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=0e7556ef-b832-43e9-a8ba-c68dd2cd6143 /var reiserfs defaults 0 1
UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b / ext4 defaults 0 1
UUID=cd78ab04-742d-4ba5-9727-90727de2dd14 swap swap defaults 0 0
UUID=dc5685e3-35b0-46d4-b259-61f2530ff36a /home ext3 defaults 0 1
And my HOOKS:
HOOKS="base udev autodetect pata scsi sata usb filesystems usbinput"
And my menu.lst:
1
default 0
timeout 32
gfxmenu (hd0,1)/boot/message
###openSUSE on sda2 - legacy grub
title openSUSE 11.4 - Celadon - gnome
root (hd0,1)
kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 resume=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part1 splash=silent quiet showopts nomodeset vga=0x314
initrd /boot/initrd-2.6.37.6-0.7-default
###openSUSE failsafe on sda2 - legacy grub
title Failsafe -- openSUSE 11.4 - 2.6.37.6-0.7
root (hd0,1)
kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x314
initrd /boot/initrd-2.6.37.6-0.7-default
###floppy###
#title Floppy
# rootnoverify (fd0)
# chainloader +1
###Fedora on sda5 - legacy grub
title Fedora 15-Lovelock gnome
root (hd0,4)
configfile /boot/grub/grub.conf
###Mint on sda6 - grub2
title Mint 9 Lucid Lynx gnome
root (hd0,5)
kernel /boot/grub/core.img
savedefault
boot
###PCLinux on sda7 - legacy grub
title PCLinuxOS 2011.6 KDE
root (hd0,6)
chainloader +1
###Ubuntu on sda8 - grub2
title Ubuntu 10.04.2 gnome
root (hd0,7)
kernel /boot/grub/core.img
savedefault
boot
####arch on sda10 - legacy grub
title ARCH
root (hd0,1)
#root UUID=XXXXXXXXXX44c5a3cd-dcb5-4cf1-933e-7a8ebac2a992
kernel /boot/arch/vmlinuz-linux root=UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8
#kernel /boot/arch/vmlinuz-linux root=(hd0,9)
#kernel /boot/arch/vmlinuz-linux root=/dev/sda10
initrd /boot/arch/initramfs-linux.img
savedefault
boot
###Debian on sda11 - grub2
title Debian 6.0.2.1 squeeze gnome
root (hd0,1)
kernel /boot/debian/vmlinuz-2.6.32-5-686 root=UUID=2b6052e2-ecdf-4796-81c8-b9e9142ca159 ro
initrd /boot/debian/initrd.img-2.6.32-5-686
savedefault
boot
###Mandriva on sda12 - legacy grub
title Mandriva 2011 KDE
root (hd0,1)
kernel /boot/mandriva/vmlinuz-2.6.38.7-desktop-1mnb2 root=UUID=5033f7fb-cac7-4db5-920c-c8bd2b51365f ro
initrd /boot/mandriva/initramfs-2.6.38.7-desktop-1mnb2.img
savedefault
boot
Here is my fdisk -l from OpenSUSE. I'm not quite swift enough to mount the hard drive and use the script utility from the Live CD yet, at least not tonight:
Disk /dev/sda: 320.1 GB, 320072932864 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142447 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c3bbb
Device Boot Start End Blocks Id System
/dev/sda1 2048 4208639 2103296 82 Linux swap / Solaris
/dev/sda2 4208640 46153727 20972544 83 Linux
/dev/sda3 46153728 87113727 20480000 83 Linux
/dev/sda4 87115770 614031755 263457993 5 Extended
/dev/sda5 87115776 128075775 20480000 83 Linux
/dev/sda6 128077824 169037823 20480000 83 Linux
/dev/sda7 169039872 209999871 20480000 83 Linux
/dev/sda8 210001920 250961919 20480000 83 Linux
/dev/sda9 250963968 291923967 20480000 83 Linux
/dev/sda10 291924031 332886015 20480992+ 83 Linux
/dev/sda11 332888064 373848063 20480000 83 Linux
/dev/sda12 373848678 414992383 20571853 83 Linux
/dev/sda13 414994432 435474431 10240000 83 Linux
/dev/sda14 435474495 455956829 10241167+ 83 Linux
/dev/sda15 455958528 578881535 61461504 b W95 FAT32
/dev/sda16 578881599 614031755 17575078+ 83 Linux
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x95aa95aa
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 294889139 147444538+ 7 HPFS/NTFS/exFAT
/dev/sdb2 294889140 312576704 8843782+ 7 HPFS/NTFS/exFAT
That's it for now.
Last edited by newbie55 (2011-09-23 22:19:58)

I'm IN! Thanks everyone for your suggestions!
The arch system didn't like the identifier I was using for the root partition. By looking at the /dev/disk/by-id while the arch system was running, I could see what the system wanted me to call the partition. So after the system error'd-out and I was in the recovery shell at the [ramfs /] prompt:
# ls -lF /dev/disk/by-id > by-id.txt
# vi by-id.txt
I could have used any of the identifiers listed in the by-id (there were 3), by-uuid(1), by-label(1) or by path(1). I tried them all. I had to write these down by hand because it is a ram filesystem.
The article that finally got me there is:
https://wiki.archlinux.org/index.php/Pe … ice_naming
Anyway my openSUSE grub menu.lst ended up like this:
####arch on sda10 - legacy grub
title ARCH
root (hd0,1)
kernel /boot/arch/vmlinuz-linux root=/dev/disk/by-uuid/510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8 rootfstype=ext4
initrd /boot/arch/initramfs-linux.img
savedefault
boot
It's easy once you: 1. beat your head against the wall
2. read further
3. repeat 1 and 2
Back to the "Beginner's Guide",4 Post-Installation. Yikes!

UML Entry menu doesn't exist

Similar Messages

Maybe you are looking for