UML290 Access manager for Mac

Any word on when the VZM for the new UML290 on a Mac will be available?

Currently, we do not have any information available for the release date for VZ Access Manager for Mac. Here is a link to VZ Access Manager site in order to check for availability at a later date:
http://www.vzam.net/download/supported.aspx

Similar Messages

  • Desktop Manager for Mac error message KB19454

    Hi All,
    I am new to the community and would appreciate any assistance. I have two recent problems for which  I am seeking troubleshooting advice. The priority problem is mentioned first below.
    I've just encountered this error message, "For help resolving this issue, refer to KB19454 in the BlackBerry Desktop Manager Knowledge Base" when attempting to sync my Curve 8320. I use a Mac, and I haven't run into any difficulties syncing since downloading the newer version of the Desktop Manager for Mac in Dec/Jan. I haven't been able to download the latest update though. I did see an early post by someone with the same difficulty, but I was unclear of the question posed, and thus I am hopeful for potential suggestions for resolution.
    The additional problem I've recently experienced is that I can't compose an SMS/MMS message. I can only reply to someone's message. When I try to simply send one, the screen defaults back to the list of messages. 
    Please Note: I do not have wireless on my phone. I utilize Blackberry Desktop Manager Version 1.0.1 
    Please also note that I am not able to access electronic messages daily but will attempt to return any responses/inquires as quickly as possible.
    Thank you in advance for assistance.
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    For your first issue, I cannot tell if you've yet worked through the referenced KB...if not, you can find it here.
    For your second issue, I'm unsure...but perhaps this will help:
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Media Manager for MAC

    OK, I received a message that Media Manager for Mac was ready, I downloaded and installed it ok. Followed all the instructions but when I try to bring it up on my tv under media manager I get the message that media manager can't be found. Any help is appreciated. thanks
    Solved!
    Go to Solution.

    alanm47 wrote:
    I tried that and I still can't get it to work. I wish Verizon would check to make sure their products actually work first before they announce that they are available.
    Do you have a secondary router between your computer and the Verizon router? This maybe a stupid question but was media manager running on the computer when you tried to access it from the TV?
    "If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

  • MS Access equivalent for Mac

    Hi there,
    Does anyone know if there is a decent MS Access equivalent for Mac ... and please do not say FileMaker as it has a different interface and table management logic that I do not really understand (Is it good enough to make it worth trying to learn?)
    If there is something that works like access (queries, multiple tables, relationships etc.) I would be very happy to take a look at it.
    Cheers

    Hi,
    start from here:
    http://guide.apple.com/
    and search Software>Productivity and Utilities>Database and similar items
    But remember: Filemaker IS the database for Mac and it is FAR better than Access.

  • How can I re-install the OS with Deskstop Manager for Mac

    I just downloaded the Deskstop manager for Mac, tried to upgrade by BB software and it gave me the JVM Error 513. Luckily I backed up all info cause I know that means the whole thing is erased. How do I on a Mac re-install the software? When I connect it to the computer it does not recognize it?

    Hmm.. that is kind of weird. 
    I did a quick search and came up with this:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13003&sliceId=SAL_Pub...
    You should be able to restore software onto your BlackBerry by disconnecting and then reconnecting it. BlackBerry Desktop Manager will have show "Connecting" at the bottom of the window, and then it should eventually recognize that software needs to be releases onto it. 

  • Steps to take if BlackBerry is not shown as connected in Desktop Manager for Mac

    Hello Community,
    Here is a list of steps you should attempt to try and get your BlackBerry detected in Desktop Manager for Mac.
    1. Make sure you're using the most up to date BlackBerry Desktop Software for Mac.  Which is available to download at http://www.blackberry.com/desktop
    2. If using a MacBook/MacBook Pro make sure the BlackBerry is plugged in the left USB port close to the screen.  If using a iMac make sure you use the USB ports on the Mac and not a USB hub.
    3. Make sure you're using a BlackBerry branded USB cord.  (There are usb cords out there for charging only).
    4. Make sure mass storage mode is enabled on your BlackBerry smartphone. KB Article.
    5. Disable Media Transport Protocol on your BlackBerry smartphone. (Options>Memory)
    6. Make sure your Mac OS X 10.6 is running in 32-bit mode. KB Article.
    7. Make sure ALL other syncing software has been uninstalled and removed off your Mac.  KB Article.
    8. Perform a battery reset on your BlackBerry smartphone. KB Article.
    9. Make sure your BlackBerry smartphone is not hour-glassing or have an application error appearing on the LCD screen. However if there is a JVM 507/513 error appearing on the BlackBerry the Desktop Manager for Mac will pick up the device and reload the software.
    10. Make sure "Open using Rosetta" is not running/disabled on Mac OS X. KB Article.
    I will be adding more tips and tricks to this post once I come across them.
    Feel free to share with other community members and I always welcome suggestions and comments. 
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

    Hey burko74,
    Do you have a media card in your BlackBerry? If so, do you get prompt for mass storage mode?
    Also does the mac pick up the media card as a removable hard drive?
    Have you tried to do a battery reset as well?
    I look forward to your reply.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • How do i access word for mac on my macbook air?

    how do i access word for mac on my macbook air?

    Purchase it.  Here's one link to an Amazon site to buy one of the many Office configurations:
    http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B003YCOJA8/ref=sr_1_3?s=so ftware&ie=UTF8&qid=1349217216&sr=1-3&keywords=office+for+mac
    You would receive Office on a CD, and need a disk drive for your MacBook Air to access so you could download the software.

  • Do I have to configure realm policy in Access Manager for IDM SPML Request

    Hi all,
    I wanted to run a SPML request from my application to the IDM which is presently protected by an AM server. Somehow, I get the following error, while I run a search using SpmlClient:
    org.openspml.util.SpmlException: Unsupported response content type "text/html", must be: "text/xml".
    Do I have to set a policy in Sun Access manager for the realm? Guys, pls help.
    Thanks,
    Aneesh.

    > I believe as long as you have access to the above two you can turn the CA off if you want.
    Enterprise CAs are not intended to be offline. Therefore, you should not turn off them. If these root CAs issue certificates only to subordinate CAs, then you should consider to implement offline Standalone (not Enterprise) Root CAs.
    > I believe the location of the CRL is detailed in the CDP which is detailed on the Certs issued but a given CA, so the client can look in the Cert and see what it states about the CDP and thereby get the list of revoked certs.
    this is correct.
    > to place its CDP at a location other than the  default location in case it overwrites the existing CRL at the default location
    no, CDP locations should be defined in the post-installation script.
    > does the fully qualified X500 name of the CDP include the CA Name (and therefore be unique) and it will not over write the original
    yes, LDAP URL includes CA server's NetBIOS name to differentiate between CAs.
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell FCIV tool.

  • Have loaded lion and now cant access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please

    Have loaded lion and now can't access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please?

    MS-Office for Mac versions 2004 and older do not run in Lion since these are PPC-apps for which Apple has dropped support.
    Free alternatives to open Word and Excel files:
    NeoOffice http://www.neooffice.org/neojava/en/index.php
    OpenOffice http://www.openoffice.org/
    Or get the 2011 MS-Office

  • Is there any way to download the Adobe Application Manager for Mac 10.5.8?

    I just subscribed to the monthly inDesign plan and was unaware I had to upgrade my system. Is there any way to download the Adobe Application Manager for Mac 10.5.8?

    LisaK78 wrote:
    I am trying to upgrade to Snow Leopard but I cannot figure out how to do it online. Do I actually need to purchase the disc and install it that way? Is there no way to download the update?
    See:
    Software update, upgrade--what's the difference?
    http://support.apple.com/kb/HT1444

  • Installing application manager for Mac

    Hi, I am trying to install application manager for Mac in order to download indesign but I keep getting the following message 'a valid installer could not be found'.
    Can you please help?

    Resolved it myself..
    Everything now installed but Indesign won't open... Can anyone help? Thanks

  • Cannot sync - BB8900 with BB Desktop Manager for Mac

    After first downloading Desktop Manager, I was able to sync with my 8900 once.  Now, every time I connect the device (via USB), Desktop Manager opens, attempts to connect to the device, and fails.  Status of the device shows at 'not connected'.
    I've followed the sync services set up for Entourage and Mac. I've also uninstalled Desktop Manager and reinstalled, but it didn't resolve it.  I've disabled my password protection from the 8900 as well, and that hasn't worked.
    I used PocketMac before, and while there were some issues with data loss and overlap, it worked most of the time.  I have uninstalled PocketMac at this point.
    Thanks for the help.
    MK

    Hey Maarten08 and autoca,
    I would suggest doing the following:
    Uninstall BlackBerry Desktop Software for Mac, restart the computer.
    Then perform the following:
    On the Mac computer, navigate to Macintosh HD >
    System > Library >
    Extensions.
    Locate the BlackBerryUSB.kext and
    BlackBerryUSBDev.kext files.
    Move these two files to the Trash.
    Empty the Trash.
    Restart the Mac computer.
    Then go to www.blackberry.com/desktop to re-download BlackBerry Desktop Manager for Mac.
    Install and then hook up the BlackBerry and make sure you have mass storage mode enabled.
    For information on how to enable mass storage mode: www.blackberry.com/btsc/KB13564
    Let me know if you run into any trouble.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Unable to Sync (Desktop Manager for Mac)

    Desktop manager for Mac does not recognize my brand new BOLD 9780.  It shows  (disconnected) and the sync button is greyed out.  
    Many thanks

    Hi and welcome to the forums!
    Use the first link for MAC specific information on trouble-shooting connection problems. The second link for documentation and support.
    Thanks,
    Bifocals
    KB00125  BlackBerry Desktop Software cannot detect the BlackBerry smartphone
    BlackBerry Desktop Software for Mac
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • BlackBerry Desktop Manager for Mac won't remember my sync preferences

    Each time I close BlackBerry Desktop Manager for Mac I and reopen it, I have to set all of my preferences for syncing my Calendar and Contacts again.  The software remembers my selections as long as I don't quit the application, but once I quit it and reopen it they are gone.
    I have tried deleting the plist files, uninstalling and reinstalling the software, but nothing fixes this issue.
    This is happening on both of my MacBook Pros and with both of my BlackBerry devices.
    Both MacBook Pros are running 10.6.1 and I have a BlackBerry Tour running 4.7.1.40 and a BlackBerry Curve 8330m running 4.5.0.138.

    despite posts to the contrary there is a big compatibility problem with Apple LION and Blackberry Desktop manager.
    BB are pretending that the problemdoes not exist, but just look over all the boards here and elsewhere.
    Come on BLACKBERRY - sort it out
    YOUR SHARE PRICE AND SALES DATA ARE TELLING YOU THAT CUSTOMERS ARE VOTING WITH THEIR FEET. I DON'T WANT TO LEAVE BB AS I USE THEM FOR MY BUSINESS.
    GET ON TOP OF THE ISSUE - PLEASE

  • Free download manager for mac

    hi. i want a free download manager for mac that integrates with safari. any suggestion?

    Two good places to look for software:
    http://www.versiontracker.com/macosx/
    http://www.macupdate.com/
    Forgot to add:
    This may be useful to you:
    http://developer.apple.com/internet/safari/faq.html
    Message was edited by: Klaus1

Maybe you are looking for