Umodauto.lst in EHPIabap in and not in trans in

Hi all
I finished EHP4 installation on my ERP-development system. I made SPAU and SPDD and marked both transport request as spau and spdd requests.
Usually the file umodauto.lst in \usr\sap\trans\bin got updated with the corresponding transport requests. But in this case not the umodauto.lst in \trans\bin got updated but the umodauto.lst in \usr\sap\EHPI\abap\bin. That's strange because I thought that I do not need the ehpi directory after the upgrade (and I could delete the entire content).
What do I have to do with the umodauto.lst? Do I have to move that from EHPI\abab\bin to \usr\sap\trans\bin?
Thanks in advance for your reply.
Regards
Marco

Hello Marco,
unless you used SAINT, there's no error here: you performed an EHPI install using the ehpi tool on the OS level, which uses the \usr\sap\EHPI\abap\bin to upgrade umodauto.lst file.
Directory \trans\bin is used for EHP1 using SAINT (less common).
But in any cases, if system did not find the TRs for SPDD/SPAU, all you need to do is to move the 'correct' umodauto.lst (the populated one) to the 'correct' \bin directory, then repeat the phase (or re-run SPAU or SPDD t-codes to have your objects adjusted). That's it
Best regards,
Tomas Black

Similar Messages

Ecc 6.0 SPDD umodauto.lst

Hi,
We are upgrading from 46c to ecc 6.0. Now we completed the Development upgrade and upgading QA.
We did SPDD during upgrade and we did not get umodauto.lst fine in ../bin directory.
Now I want to know the exact process to get umodauto.lst file and transport request.
We are upgrading QA and here we plan to do SPDD once again and we want to make umodauto.lst available for further upgrades.
pl. suggest up.
In SPDD we did changes and system prompted for transport request.
We did not release TR or tasks in TR.
now tell us how do we do this.

Hi
If you choose strategy downtime-minimized, the ABAP Dictionary objects (tables, data elements, domains, and so on) are adjusted during production operation. If you choose
strategy resource-minimized, they are adjusted during downtime before the ABAP Dictionary is activated. The adjusted objects are collected in a repair that is released to
a transport request. You cannot release this transport request; instead you must flag it for transport in transaction SPDD. Towards the end of the upgrade, SAPup exports the request to the transport directory /usr/sap/trans and registers it for transport in the umodauto.lst file.
Once it registers in umodauto.lst. For the later upgrade boxes -> In PREPARE phase ADJUSTPRP the following screen appears
For automatically maintaining your modification in your ystem during the upgrade transport request from earlier upgrades are searched in the umoauto.lst in directory /usr/sap/trans/bin..
The file could not be read
There are several reason why this may be correct
eg: 'this is your first upgrade' or 'your system is not modified'.
Did you expect a list of transports being found?
->Confirm a list of transports to be included in the upgrade
Select Yes & OK
view umodauto.lst , should list as below eg:
SPDD 700 SIDK100001
Click on Yes to include the transport
Click Yes to stop the ACT_700 phase and check the results of SPDD

LST No/CST No is not showing in Excise Header table

Dear All,
I am facing one problem that i maintained the LST No.(J_1ILSTNO) and CST No(J_1ICSTNO) in transaction J1ID -customer master excise additional data against the customer code but when i am creating the Excise invoice for that customer then in excise header table (J_1iexchdr )the LST No(LSTNO)/CST No (CSTNO) is not showing or not getting updated ?
any reason why it is not getting updated in excise header table?
warm regards
ravi k

HI
it was a typo error the table is J_1IEXCHDR
check the customer master and also check whether they are coming in excise invoice
also check this Note 1048759 - CST, LST, PAN no. of customer not filled in J1IIN
regards

Using NULL and NOT NULL in prompted filters

Dear all,
While trying to grap the concept of prompted filters in sap bo web intelligence, I had a question whether why we cannot use NULL and NOT NULL while creating a prompted filters in our report.

HI,
'Is Null' and 'Not Null' are the predefined functions in webi which only eliminate the null values or considering only null values.
'Is Null' and 'Not Null' are itself predefined functions that why you are not getting prompts.
Null values are standard across the databases so this is defined as a function in webi to specific eliminate the null values.
If something is not standard then there is option in the webi to use different operator with static values or with prompts.
More more information on Null see the Null wiki page.
Null (SQL) - Wikipedia, the free encyclopedia
Amit

Order Of Null and Not Null Values while table creation

We have to create a table with 10 fields .5 of them are Null and Not Null. Now my question what should be the order of fileds??.Means Null Fields will come first or Not Null.

The only reason I can think of having the NULL columns at the end is storage space.
To conserve space, a null in a column only stores the column length (zero). Oracle
does not store data for the null column. Also, for trailing null columns, Oracle does
not even store the column length.

Excise invoice is not saving and not showing datas

in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.

Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
<b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
Check
<b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT</b>
Message was edited by:
sam masker

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjus

Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.

Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

How can I buy films in languages other than German in Germany? Quite disappointed, i would line to watch films in Original language and not dubbed in strange ways...

How can I buy films in languages other than German in Germany? Quite disappointed, i would like
to watch films in Original language and not dubbed in strange ways...

You are at the mercy of the content owners/copyright holders. They decide what the Apple can sell in each iTS.
MJ

Is it possible to keep all iTunes media on an external hard drive and not on my Mac Book and have ITunes still function?

Let me begin by saying I'm new to the Mac world as well as to the realm of online forums so I apologize if this is a question that was already asked and/or if it is a very noobish question...
But anyway, I just recently got the new Macbook Pro 15" with RD and I am curious if I can keep all of my Itunes media on an external hard drive without keeping any of it on the Macbook itself and have Itunes still function (when the HD is connected of course). I am trying to keep the computer memory clutter free and not fill it up with music and stuff so I want to keep all of my media on a 1T Buffalo external hard drive so the computer stays like brand new for a long time..Right now I have about 5G worth of music on my hard drive and I thought it was only on the hard drive and I just recently found out that it is also within the music folder on the computer itself. Any thoughts? Sorry if it is an odd question, I can try to rephrase the question if need be. Any tips or advice is greatly appreciated, Thanks!

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the iTunes Library.itl file in the moved iTunes folder.
If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
Longer answers if for any reason you do not think all library files are inside your iTunes folder (changed preferences settings at some point):
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168
2011 ilounge article: Transferring your iTunes library - http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/ - An article with good background information (similar to the links above), particularly if you are not sure your media files are all grouped for quick answer above. Unfortunately under the single term "transferring library" it describes two very different moves; relocating just your media (not really transferring your library and not recommended unless you really need this configuration), and relocating media+database (really your whole "library"). Make sure you understand the difference before electing to move only media.

How can i delete photos in a folder from my Iphone 4s. when it was synced, the photos went to two folders and not to the camera roll

How can I delter photos in a folder from my Iphone 4s? When I synced the new phone from the Itunes, the photos went to two folders and not the camera roll.

thanks, should I delete all the phones on Itunes and re sync the old phone, then resync the new phone to get the pictures? Will they go to camera roll instead of a folder?

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Getting Segment in the Asset Master ( Using SEGMENT Badi and not Prt Ctrs)

Hi,
We need the field Segment to be populated in the Asset Master to get the correct P&L Statements ( The depreciation run, retirements etc to post to the Segments) . We are using the segment Badi: FAGL_DERIVE_SEGMENT to derive Segments and NOT the Profit Centers
However, the field Segment missing in Asset Master (Class). The field segment is missing the Time Dependent view while creating the Asset Master Data. This is so because in the Configuration of Asset Accounting --> Integration with GL --> Additional Account
Assignment Objects is not showing the Segment field.
According to SAP help, I CAN DO THIS as mentioned
http://help.sap.com/erp2005_ehp_05/helpdata/en/94/f13167dbae436a85a4a1d3ad75f274/frameset.htm
But, as mentioned in the SAP help link above, I am not able to find " Activate segment reporting in
Customizing for Asset Accounting under Integration with General
Ledger --> Accounting Segment Reporting --> Activate Segment Reporting"
Also, from another SAP Help link
http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/fb/84a48d665e4fa9a2dc7b60adeb7c7d/frameset.htm
I found that activation of Business Function FIN_GL_REORG_1
or FIN_REP_SIMPL_3 could also get us the Segment Field in the Asset
Master Data's Time Dependent Field
However, when I goto Transaction SFW5 - Change Business Function Statuswe are not able to find these Business Functions (FIN_GL_REORG_1
or FIN_REP_SIMPL_3 )
Regards
KS

Hi, Activate segment reporting is available only in EHP5.
If you'renot using EHP5, then you can't to update segment as well as profit center in asset master data.
The only way is to put co objects in asset master data, and derive PC,segment based on this co objects

Umodauto.lst in EHPIabap in and not in trans in

Similar Messages

Maybe you are looking for