UMX Roles - Is there a report which lists the roles created through UMX
Hi
Are there any reports available which will detail the roles created in User Management. We need a listing of the roles created by categories.
tia
Kumar
Hi,
If you are on 11i, there is no seeded report to list the roles -- Query the tables listed in "Oracle Application Object Library Release Notes, Release 12.1.1 [ID 566521.1]", under "3.8 Oracle User Management - SOX Compliance RBAC Reports" to get those details.
The (List of Users"/" List of Roles/Responsibilities"/"List of Functions/Permissions"/"List of Data Security Objects) is only available in 12.1.1 and above.
Thanks,
Hussein
Similar Messages
-
Report in idm which lists the system ip' frm where Application is accessed
Hi All,
Can any one get me the name of the report which list the ip's of the system from where the idm Application is accessed.
Thanks in AdvanceThere's a built-in "today's activity" report that comes out of the box. You should be able to see the client's IP address in any of the "login" actions of type "user". It's an auditlog report.
-
To show report which list all Accounts with no activity associated with it
Hi
1) Is it possible to show report which list all the accounts which do not have any activity associated with it?
2) A report which shows All the accounts with Activity ( Even though there is no activity associated with it)
Quick reply appreciatedHi Rits,
You can achieve this using combine analysis. Create two reports and in the first one make the Activity Id blank, In the second report keep it as it is and do union of both the analysis.
This will give you all the accounts which have/have not Activities associated with them.
Hope it helps,
Thanks,
Mayank -
In sap is there any report which gives us the details of all prctr group
Hi,
In sap is there any report which gives us the detail of all profit center and their respective profit center group. I need a report or t.code which gives me the details of profit center hierarchy with description and also the associated profit center to it.Is there any report beside t.code KE5X.
With regardsHello
I like to use TCode KCH6N (Profit Centre standard Hierarchy)
Although this does not give as much Master data info as the TCode you use, it does give description, who responsible and most importantly where in the structure/hierarchy every Profit centre and Profit centre group is in relation to each other. -
A report which shows the purchase order MM and the linked vendor invoice
Hi All,
I wonder if ther's a SAP standard report which shows the purchase order MM and the linked vendor invoice (the FI document) with the Net due date.
Could anyone help me?
Thanks
G.RossiHi,
ME80FN with PO History View
ME2N with Scope of List "ALLES" -
A report which shows the vendor invoice and its purchase order MM
Hi All,
I wonder if ther's a SAP standard report which shows the vendor invoice (the FI document) and its purchase order MM.
Could anyone help me?
Thanks
G.Rossi
Edited by: Lakshmipathi on Aug 2, 2011 2:24 PM
Thread Locked - Reason Cross PostedDear,
you can use FBL1N,
From there you can view following things:
1. Vendor Invoice = Reference
2. Document type = KR and RE for Invoices
3. Po Number
4. Amount
you can enable there many fields as per your requirement.
Hope this helps!!!
Br,Vivek -
I Need interactive report to list the purchase orders details for a vendor
I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.
Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji -
Is there any report to see the consumption details?
Hi,
Is there any report to see the consumption details? with material number or without material number?
Regards,
SattujThere are a no of ways from where you can get your desrired data....
Table mver---used for material consumption.
T code mcre---again used in consumption reports,
Table MVER gives you detail of Material Consumption
Also, MSEG (MENGE) and S026 (ENMNG) ... Pls restrict the selection condition for material with movement type 261 in table MSEG
Tables
DBERCHV Consumption History
DVER Material Consumption for MRP Area
You can get all the consumption details in MB51 report by selecting relevnt movement types. And MB5S also.
For Repetetive :-
Check this T Code MCRP,which gives you the exact material consumption datewise or order wise.
*Report MCRE is widely used for the material cosnumption than checking in COOIS.*
Also these reports can help you.
MCPF Material analysis: Dates
MCPO Material analysis: Quantities
MCPW Material analysis: Lead time -
Is there any report to get the header/item text at GR stage together?
Hi gurus,
Is there any report to get the header/item text at GR stage together with a date range?
at the point of goods receipt? Or a report that could be run to search for header/item text at GR stage together with a date range?
Text that was entered at the point of goods receipt?Hi
Check MB51 report with posting dates for materials/vendors and use the display variant document header text (which is GR header text). I hope this is the one you are looking for.
Thanks -
Hi All
Which are the roles in SCCM 2012 R2 ,which cannot be installed on CAS and which are the roles which can only be installed on CAS . and which are the roles which should be installed on both CAS and Primary.Here is the official list that describes where you can install the different roles:
http://technet.microsoft.com/en-us/library/gg712282.aspx#Plan_Where_to_Install_Sites
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Is there any report to view" the blocked Vendor Invoices along with the Pay
Dear Gurus,
Is there any report to view" the blocked Vendor Invoices along with the Payment Date". Please Let me know.
BalajiI think you can solve this issue with a Query.
Fernando. -
Is there any report to see the Latest GR receipts materials wise
Dear Experts,
is there any report to see the Latest GR receipts materials wise , thanks in advance
regards
rajakarthiktransaction MC.A
Execute it.
if you see the result, then press F6 to add the date fields to the screen. -
Is there a report showing all the DDL objects for one APP?
Hi,
Is there a report showing all the DDL objects for one APP?
I need to move an app to my workspace. The workspace I need to move it from has approx 20 applications in it, thus all the tables, procedures, etc are too many.
What way is the easiest?
I've looked at exporting the DDL and the app. and look to see what the app needs. But it has many pages.
Thank you, BillCHello Bill,
You might find the report in the following location to be helpful:
Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
Regards,
Arie. -
Daily check report to list the vendor name, material, quantity
hi friends,
can you help me to write daily check report to list the vendor name, materials and quanitity?
thanks in advanceHI ,
What do you mean my daily check report..
Do you want to see the status of the PO sent to a Vendor on a daily basis..
Thanks
Mahesh -
Is there a way to list the next 5 appointments on my calendar in the notification area?
is there a way to list the next 5 appointments on my calendar in the notification area?
I had that on but it doesn't show anything the reminder only shows up if the event has a reminder set for a specific time. I want to straight up see the next 1,5,... Events in list form. This may not be possible but it would be great. Just like when you are in calendar and display by list.
Maybe you are looking for
-
How do I open a new tab/new URL from a plugin's sidebar?
I have created a plugin with a sidebar. I would like to be able to change the URL of the current tab in the sidebar's window or open a new tab, given that I click a button in the sidebar (or an event is triggered in the sidebar). I am currently using
-
MOTOROKR T505 Bluetooth In-Car Speakerphone with Digital FM Transmitter
Hi, Has anyone tried this product yet with their iPhone? Does anyone have any other products like this one they recommend? Thanks, Jerry
-
I have been trying for 2 days trying to install Xcode 4. I downloaded it from the AppStore. When it gets halfway done I get an error message .../var/log/install.log. I have read some forms and tried a number of troubleshooting tasks. 1.delating, down
-
I accidentally uninstalled quicktime. How do i get it back?
The other day I completly removed QuickTime from my computer by mistake. I went to the apple website to try and download it but there is no link for a .dmg. Instead there is a message that says "Use Software Update to keep QuickTime up to date on y
-
Hello, I have a log file that tells that the license file is missing for LAN_ENTERPRISE_SERVICES_PKG, but I do not use any feature of that package NX3k# sh feature | include ena lldp 1 enabled private-vlan 1