(Un)expected btn value change

My problem is quite complicated to explain so I made short swf video to explain it. I am trying to show a detail view of one of the columns of a multicolumn listbox(MCLB) by showing a button control allowing to edit a value that I hover over. That works fine. I want to chanage the value of corresponding cell when the user uses inc/dec arrows or enters a number and hits enter. The problem is that when the user only enters number without using enter afterwards such a value should be simply ignored and when hovering over some other cell it should display its value. Unfortunatelly it chnages the value of following cell. The reason is that at first MouseLeave event of the Btn is fired thus the Btn is hidden and thus the Value change event fired. But before the ValChange event is fired it also handles the MCLB Mouse Move event where the actual cell coordinates are changed thereby following ValChange has inproper cell cordinates. Sounds complicated but the video hopefully enlightes it. How to overcome this issue. I just want when the num is entered manuanlly without hiting enter to ignore the value. Thanks!
Message Edited by ceties on 07-02-2009 11:58 AM
LV 2011, Win7
Attachments:
ValChangeIssue.zip ‏194 KB

I got it working more or less as I wish. Now it will chase the LB value only if the user used the increment/decrement buttons or used ENTER/Return for entering the value. Escape hides the button.
Somebody might have use from it…
LV 2011, Win7
Attachments:
ValChangeIssue_mod.zip ‏67 KB

Similar Messages

Using md5 in a manul tabular form to compare if column value changed

Version: Application Express 3.2.0.00.27
Hello,
I am creating a manul tabular form using apx_item in my select statment that is the source for the query in a report region. I am using a collection. The collection creation statement is:
    apex_collection.create_collection_from_query(
       p_collection_name => 'DELEG_COLL',
       p_query           => 'SELECT authid
                           ,empid empid
                           ,to_char(deldate,''DD-MON-YYYY'') deldate
                           ,delscope delscope
                           ,dellimits dellimits
                           ,subdelrights subdelrights
                           ,to_char(delexpiry,''DD-MON-YYYY'') delexpiry
                           ,to_char(datedelremoved,''DD-MON-YYYY'') datedelremoved
                           ,delremovalcomments delremovalcomments
                           ,delegator delegator
                           ,''O'' original_record
                           ,wwv_flow_item.md5(delscope, dellimits, subdelrights,
                              to_char(delexpiry,''DD-MON-YYYY'') delexpiry,
                              to_char(datedelremoved,''DD-MON-YYYY'') datedelremoved,
                              delremovalcomments, delegator)
                           FROM tbl_delegations
                           where empid = v(''P12_EMPID'')',
       p_generate_md5     => 'YES');The above code is giving me an error in the function
wwv_flow_item.md5(delscope, dellimits, subdelrights,
                              to_char(delexpiry,''DD-MON-YYYY'') delexpiry,
                              to_char(datedelremoved,''DD-MON-YYYY'') datedelremoved,
                              delremovalcomments, delegator)It doesn't seem to like where I attempt to convert date column delexpiry and datedelremoved to a varchar. I am doing this as in the db they are dates and inorder to using the md5 function to compare if the values have changed and only update rows where the values changed.
There error that I get is:
ORA-20104: create_collection_from_query Error:ORA-20104: create_collection_from_query ParseErr:ORA-00907: missing right parenthesis
In the collection I am trying to store the md5 hash result. I haved all the update and insert logic working expect for date type columns. THose give the above error.
I thank you ahead of time for your assistance!
A. Shalon

Helen,
Not sure I fully understand your goal. We don't use "tasks" at all but if you are looking to have your workflow check certain valus and be able to send email messages to people based on whatever, then you can certainly do that (as long as your Sharepoint
has the email setup. We do this for alot of workflow tasks.
So, in the workflow you can have a blanket statement like what I previously listed:
if Current Item:hiddenStatus not equals Current Item:Status
    .... do something
or you can do something like:
if Current Item:hiddenStatus equals "In-Progress"
    .... do something
Else if Current Item:hiddenStatus equals "Completed"
    .... do something
or combine the two and do nested "if" statements. Then you add an email statement wherever you need it like:
if Current Item:hiddenStatus equals "Completed"
   then email "these users"
To add the email part, just type in "email" on the line where you want to add a statment. There is only one option to choose from. That will display the line "then email these users".   The "these users" will be a link. When you
click it you will get a popup to add the email info. We typically will send the email to a user (or users) that are already listed in one of the PeoplePicker fields. On the email form, you can type in your own text, designate that a value is based
on a column value (like our PeoplePicker), designate that a value is based on a workflow variable, add a link to the current item, etc. To get to these options you will click the button to the right of the fields or use the "Add or Change Lookup" button
in the bottom-left for the text area. There is alot you can set in the mail.
Does this help answer your question?
- Peter

Value change listener method on h:selectBooleanCheckbox in h:dataTable

Hello,
Does JSF handle value change listeners as expected when they are attached to h:selectBooleanCheckbox components within an h:dataTable?
In the following example, I have a JSP that has some h:selectBooleanCheckbox components nested in an h:dataTable, and some that aren't. When I bulid and deploy the example to Tomcat 5.5, I can see (using the log4j output) that the value change listener methods for the checkboxes that are NOT in the dataTable are fired, but the ones that are in the dataTable do not get fired.
I am using Sun's RI of JSF, version 1.1.0.1.
Thanks,
Scott
----------------------------- JSP:
<%@ page language="java" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:view>
<h:form>
<h:dataTable value="#{checkboxBean.beans}" var="thisBean">
     <h:column>
          <h:outputText value="#{thisBean.id}: " />
     </h:column>
     <h:column>
          <h:selectBooleanCheckbox value="#{thisBean.checked}" valueChangeListener="#{checkboxBean.somethingChanged}" />
     </h:column>
</h:dataTable>
     <h:panelGrid columns="2">
          <h:outputText value="One:"/>
          <h:selectBooleanCheckbox id="firstOne" valueChangeListener="#{checkboxBean.somethingChanged}" />
          <h:outputText value="Two:"/>
          <h:selectBooleanCheckbox id="secondOne" valueChangeListener="#{checkboxBean.somethingChanged}" />
          <h:panelGroup/>
          <h:commandButton value="Do Stuff" action="#{checkboxBean.doStuff}" />
     </h:panelGrid>
</h:form>
</f:view>----------------------------- Beans:
package workshop;
import javax.faces.event.ValueChangeEvent;
import org.apache.log4j.Logger;
* Test attaching value change listener methods to checkboxes.
public class CheckboxBean {
    private static final Logger logger = Logger.getLogger(CheckboxBean.class);
    private SomeBean[] beans = null;
    public CheckboxBean() {
        logger.debug("CheckboxBean()");
    public String load() {
        SomeBean[] someBeans = new SomeBean[3];
        someBeans[0] = new SomeBean("firstGuy", false);
        someBeans[1] = new SomeBean("2ndGuy", false);
        someBeans[2] = new SomeBean("third", false);
        this.setBeans(someBeans);
        return null;
    public String doStuff() {
        logger.debug("doStuff()");
        return this.load();
    public void somethingChanged(ValueChangeEvent e) {
        logger.debug("somethingChanged() in component with id " + e.getComponent().getId() );
    public SomeBean[] getBeans() {
        logger.debug("getBeans()");
        return this.beans;
    public void setBeans(SomeBean[] beans) {
        logger.debug("setBeans()");
        this.beans = beans;
package workshop;
public class SomeBean {
    private boolean checked = false;
    private String id = null;
    public SomeBean() {
    public SomeBean(String anId, boolean bool) {
        super();
        this.id = anId;
        this.checked = bool;
    public String getId() {
        return this.id;
    public void setId(String id) {
        this.id = id;
    public boolean isChecked() {
        return this.checked;
    public boolean getChecked() {
        return this.checked;
    public void setChecked(boolean checked) {
        this.checked = checked;
}----------------------------- faces-config.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN" "http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config>
<managed-bean>
    <description>Checkbox bean.</description>
    <managed-bean-name>checkboxBean</managed-bean-name>
    <managed-bean-class>workshop.CheckboxBean</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
</managed-bean>
</faces-config>----------------------------- log4j config:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
    <appender name="RollingFile" class="org.apache.log4j.RollingFileAppender" >
          <param name="File" value="/Users/scott/workshop/logs/workshop.log"/>
        <param name="Append" value="false"/>
        <param name="MaxFileSize" value="4096KB" />
        <param name="MaxBackupIndex" value="4" />
        <layout class="org.apache.log4j.PatternLayout">
          <param name="ConversionPattern" value="%d{DATE} %-5p %-15c{1} : %m%n"/>
        </layout>
    </appender>
    <category name="workshop" >
      <priority value="debug" />
    </category>
    <root>
        <priority value="warn" />
        <appender-ref ref="RollingFile" />
    </root>
</log4j:configuration>

I have Just run into the same problem. When using the following code inside a data table the valueChangeListener event is not fired when the checkbox has it's value changed. Is this a bug?
I created a simple page with just a form and the selectBooleanCheckbox. This time the valueChangeListener event fired OK. It seems the problem only occurs when the check box is inside the dataTable
here is the code snippet
<h:form >
<h:column>
<f:facet name="header">
     <h:outputText value="Add to Basket"/>
</f:facet>
<h:selectBooleanCheckbox immediate="true" valueChangeListener="#{reportsResultHandler.addToBasket}" value="#{reportsResultHandler.addbasketChecked}" onchange="this.form.submit
();"/>
</h:column>
</h:form>

Using an event structure to reset a boolean control with ring menu value change

I am trying to get two boolean buttons to reset when the value of a ring menu changes. For this I am using an event structure set to execute with a ring value change. However I have other code that needs to be executing while the event structure waits for the value change. I place my event structure inside the while loop the buttons reset as expected but my other code does not run (except at the moment of value change). If I place it outside the loop the rest of the code functions as expected but the buttons do not reset. Any help you can offer is much appreciated.
Solved!
Go to Solution.
Attachments:
event structure reset.vi ‏11 KB

try this
Attachments:
event structure reset_edit.vi ‏14 KB

Intensive slider control use may lead to LabVIEW hang and system instability when coupled to event loop "Value Change"

Occasionally, over the past year or two, I have noticed on different machines and versions of LabVIEW (8.0 and 8.5) that intensive operation of the LabVIEW slider control (holding down the left mouse button and shaking the mouse quickly back and forth to move the slider for several seconds) may cause LabVIEW to hang with high CPU usage (50% on my current test machine, which has a Pentium IV "hyperthreaded" processor, so 50% is the max that a single thread can take up). In some instances, after the LabVIEW process is forced to quit, the system itself becomes unstable (more high CPU usage) or hangs, up to and including the need for a hard restart. I have seen this behavior both when handling slider change events the "old fashioned" way with a while loop and a case structure; and also when using a while loop with an event structure handling the "Value Change" event for the slider.
Attached is an .rtf file dump of the front panel and block diagram of a simple test VI that replicates this problem in my hands (using an event structure). The loop count runs to at least several hundred iterations before the crash occurs.
At least for the "old fashioned" loop handling method, adding a forced wait of a few dozen msec per loop didn't seem to be a workaround. I haven't tried this idea with the event structure, but don't expect joy to follow. The possibility of a system hang discourages aggressive experimentation.
Is this a known issue? Can anyone else replicate it (carefully)? In any case, I'd welcome other suggestions for workarounds.
Thanks,
Darin Nelson
Attachments:
Hang Slider.rtf ‏683 KB

Thanks for all your responses, and especially to those who are waggling their mice around trying to reproduce this. I'll respond to (most aspects of) the last several posts in one message.
LabViewGuruWannabe:
I'll see if I can get the original code to post in a separate message, I posted the .rtf originally because I thought there might be filtering on forum posts (I'm sort of new here). But I doubt you re-created it wrong.
The "more modern" test hardware was an Intel Core2 , 2.4 GHz, 2Gb RAM, on an Intel 965 family motherboard. As I said, it took me two tries to trigger the error on this hardware; in the case where it triggered, I was at almost 12000 iterations before things went south. 10000 iterations, therefore, might not be enough--or you might never get it, for all I know. My Pentium 4 Hyperthreaded machine (3.2 GHz, 2 Gb RAM) triggers the hang much more easily (always within 2500 iterations, usually within 1000), so there seems to be some hardware dependence here. Maybe the workaround is just to use hardware recent enough that no one not under the influence of strange compulsions will accidentally trigger the hang.
TonP:
After reading your suggestion, I tried something even more radical -- getting rid of the handling code altogether. I took the slider node out of the while loop, and removed all code inside the "Slide" case of the event structure.
On my Pentium 4 machine, the hang triggered after 677 iterations.
Brian Beal:

Huh, I never even noticed that checkbox existed. Anyway, yes, I
kept the default to lock out the front panel while the event process. If I
disable it… I still get the hang.
Message Edited by dman on 02-04-2008 06:36 AM

Line Item Value change in MIRO Transaction

I have one requirement i.e as follows.
<b>Line Item Value change in MIRO Transaction</b>
After getting the items in table control of the miro screen of a particular order.
I have to clicked on edit own condition of selected item.
then it will show another screen ( create invoice document item - conditions)which have the all condtions details like
Fra1 , frb1 , sd% , Penalty % , gross price , frieght charges etc.
In this screen first time it is showing line item as
in the miro intial screen i.e. if u click po item
10 it will show 10 only.
after updating fra1 value , i came back to the main screen at that time it is asking that select the any one of three.
after selecting manual selection its fra1 was changed.
once again if i go to the same line item by clicking
the edit own condition(13 column if u select all information in textbox whixh is above tablecontrol right corner) it is showing line item as 1 in screen ( create invoice document item - conditions) which should be line item as 10. ( here i took line item as 10)
Please clarify this, why it is showing
first time as a original line item and
after updating it is showing like
for line item 10 -
1
               20 -
2
              100 -
10
              110 -
11.

"...it does not work..." is probably the worst description of a problem you can imagine. As an application developer you should know that. Do you use firebug to see what happens once it "does not work"? Any better hints?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to put a page break when a value changes

Hi there, I am very new to BI Publisher. I realize this is a really SIMPLE question, but I can't seem to find a CLEAR answer.
I have a set of data that I have a repeating group for in my RTF template and it works great. But I want to have a page break each time one of the values changes and I cannot figure out how.
here is the xml
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>123</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>614</LINE_NO>
<COUNT_NO>614</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
- <G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>1232</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>615</LINE_NO>
<COUNT_NO>615</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
</PIR05>
I want the g_item_no (repeating group) to have a page break each time LOCATION changes.

You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
Or just before your end-for-each, have this code.
<?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
Ensure that its placed in a form field.
This will have a page break when LOCATION changes.

Multicolumn listbox value change and mouse up event in one case of event structure

Hello All,
Am facing two problems:
1. I have two multicolumn events, one is value change for deleting the rows of Multicolumn listbox and another one is mouse up for sorting the columns. But I can't combine both the events in one case. And if I create two separate cases then each time the event of mouse up executes and sorting takes place irrespective of selection of delete event.
2. I have a selection VI in which user selects which parameter he wants to show it in a multicolumn listbox. I want this parameters to be retain or stored when next time I run the VI after closing it.
Am using LabVIEW 11. Pls reply soon.
Thanks & Regards,
Manisha

try this
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.
Attachments:
Untitled 2.vi ‏12 KB

Double value change event if cursor is set busy (LV2009)

Hello everybody,
I just migrated from LV 8.0 to LV 2009 (on linux) and now got problems with a value change event. I want to send a command if a button is pressed and send another one if the button is released. After sending the command I need to wait for an acknowledge from the receiver and to avoid user interaction in between I lock the cursor with "set busy" VI until the acknowledge is received. To see, when the button is pressed or released, I use a value change event. Inside the event structure the cursor is set busy.
This worked reliable in LV 8.0 but not any more in LV 2009. The button's mechanical action is set to "switch until released" and if I press the button and keep it pressed it is reset to false automatically. The value change event is fired twice instead of only once (see attached vi) and "new value" is one time true and one time false. This doesn't happen if the mechanical action is set to "switch when pressed".
Does anybody have an explanation or a workaround for this behaviour? Am I doing something wrong or is this a bug in LV? For now I'll just keep the cursor unlocked.
Thanks for your help.
Attachments:
setMouseBusy_01.vi ‏11 KB

Hi ckis,
attached you'll find your modified example, it should do the trick now.
Regards,
Bernd
Attachments:
setMouseBusy_01.vi ‏9 KB

Using a Global as a value change in an Event Structure

I have many events I want to react to based on Global buttons. How do I get the Event Structure to recognize a global button value change? This screen shot is one of my many attempts. So far my events only change with a real button on the FP.
Thanks in advance,
Doug
Attachments:
Event Structure.JPG ‏147 KB

nonecure wrote:
Jim,
The Value (Signaling) does not work either.
I would rather not use a notifier, so maybe I need to get away from using an event structure.
Thanks
It should work if your code was executing correctly. The image you posted...
may be the reason.
If you watch the code in execution highlighting it may help you figure what is happening.
1) There is no guarentee that "initialize" will be written to the local "State" before the loop starts running. Use a shift register to track your state from iteration to iteration.
Do you get any errors?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I fire an event case on the value change of an indicator, or a network variable?

Hi! I have an event structure setup to look for a value change of an indicator on the front panel. The indicator is updated by the value of a boolean network-published shared variable through a seperate parallel loop that is polling all of the network-published shared variables. The event, however, does not fire when the indicator changes value. I have switched the indicator to a control and tested it with user interaction and that works just fine.
I want to use the event structure space for my code exectution because it seems logical that that is where it would go, and it will help keep my block diagram tity. The code is also something I would like executed with the front pannel temperarily disabled. I would rather not have the code in my network-variable polling loop because again the tity issue. I would also rather not use a notification VI wired to an independent loop for this particular code.
Is there a way to have an event structure fire an event with the value change of an indicator, or a network variable directly?
Thanks for your input.
LV 8.5
-Nic

Thanks for the reply.
I went about things a little differently, but got them to work so..... . It really was not my desire to have a boolean indicator on the front panel. As previously stated, my ultimate goal was to have an event fire on the change of a network variable, which I had to poll for anyway but that is tucked away in a section where I am handling all my network variables. I ended up using that Create User Event, Register User Event, and Generate User Event SubVIs to handle the task.
I've read the help for all of those SubVI's and it is not entirely clear to me if the event fires every time the "Generate User Event" receives some inputs, or if it only fires when the value changes. I could do a test to find out. It wouldn't be too difficult to add a shift register or a feedback node and place the Generate User Event in a case structure so that it is only fired when the input changes state.

New Page in ALV for Value Change on a Field

Is it possible to trigger a new page while prinitng from ALV whenever a value changes in a column.
Thank you,
Shashi Reddy

Hi,
Yes it is possible to add page breaks on a particular column while previewing/printing from ALV.
Declare a structure like
DATA: gs_print    type lvc_s_prnt.
and before calling set_table_for_first_display, write
gs_print-grpchgedit = 'X'.
Now pass this structure to the method as follows:
    call method grid->set_table_for_first_display
         exporting
           is_print         = gs_print
           is_layout        = gs_layout
           is_variant       = gs_variant
           i_save           = 'A'
           i_default        = 'X'
         changing
           it_fieldcatalog = gt_fieldcat[]
           it_outtab        = g_t_outtab[]
           it_sort          = gt_sort[].
Run the report. Now when you are in the print preview mode, press the sort ascending or descending button on toolbar (without selecting a column). A dialog box appears asking for sort order. Add the required field, from the available list on right hand side, on which you want a page-break. In the last column titled NG of this sort order dialog box, write * for page feed or UL for line feed. Press Copy button to see the effect.
Hope this helps.
Regards
Shehryar

Report to show APC value changes

Is there a report which will show all the APC value changes for an asset. The asset acquisition/transactions report shows addition of new cost (new aquisition). The requirement is the changes to the cost, for instance adding additional cost to an asset or any credit memos done. Retirements should not be a part of this report.
Edited by: sapfincon on Sep 16, 2009 12:54 AM

Hi,
if you have to differentiate acquisition postings in the same fiscal year, then in fact you have to use 2 different transaction types. You can change the transaction type in ABZON according to your needs during the posting.
If the transactions are in 2 different fiscal years, then it should be no problem. The acquisition from the prior year will not be shown isolated, it is contained in the cumulated APC amount at fiscal year start. This is history sheet group YA. And the current year addition can be shown under it´s history sheet group assigned to transaction type 100.
Regards,
Markus

How to write rfc when value change in the screen (browser) in webdynpro.

Hi,
I want to know how can i write an RFC when screen value change in webdynpro. I already designed a rfc where all the value can be seen in the webdypro screen. Now when user change the value how can i pick the changed value in R/3 so that i can save it into the respective database. Please send some code for understanding it easily as i am new to this field.
Regards
Deep

Hi Deepak,
Though I dint understand your requirment properly but as it is raised in Web Dynpro forum I considering that you want to send the data filled by the user to your backend using RFC calls. For this purpose you can refer to this two documents available on SDN.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/creating%20a%20web%20dynpro%20application%20accessing%20abap%20functions.pdf">Tutorial 4</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d352a790-0201-0010-5082-b1a608d22b6c">Tutorial 5</a>
Regards
Sid

Non cumulative with non cumulative value change

hi,
can any one tell the concept of non cumulative with non cumulative value change with an example with numbers,i am bit confused .
like we have for non *** inflow and outflow- stocks inflow and outflow so non *** is based on inflow and inflow.
in the same way any example for above concept

Hi Venkat,
If I under stand your question correctly you wish to have an example of where non cumulative values are used and you have given the value of stock? If so here is an example with figures
So you would do an initial load loading the opening balances of Stock.
Say material number 12345 = 100 units
After that, only movements will be posted so Stock will either increase or decrease depending on what image is posted via the change log.
So there will be a purchase of material 12345 for 50 units so now the balance of material is 150.
But then you could use or sell 70 units of material 12345 so you stock value would be 80 units
I hope this makes sense and this is an example that you are after if not please let me know and I'm happy to help
Regards
Ben
PS assign points if useful

(Un)expect​ed btn value change

Similar Messages

Maybe you are looking for

(Un)expected btn value change