Un installation of 11.5.8 on windows server 2000

HI,
I tried to Un install and cleanup the installation of 11.5.8 on windows 2000 server. I used doc. given on metalink. Afterwards I couldn't start the Rapidwiz. I could only reinstall 11.5.8 after reinstalling win2k server. If anybody has does the successful un installation of 11.5.8 on win2k server, Pl. provide to me the information.
Thanks
Rajeev

Kashif,
Do you have a proper entry in the hosts file? Verify by running the following:
C:\> ping <hostname>
C:\> ping <hostname.domainname>
In addition, please check the installation log file for more details about the error.

Similar Messages

How to setup NWDI environment in the Windows Server 2000?

Hi,
I need to setup NWDI environment in the Windows Server 2000. I have NWDS and SAP R/3 6.0 installed along with SAP EP 7.0.
Please provide me with enough details to do so.
from where i need to download NWDI software?
Thanks & Regards,
Sathya

Hi ,
recommend you to install it in new hardware as nwdi uses hardware resources efficiently.
You have to install a NWDI (NetWeaver Development Infrastructure -or- Usage Type "DI") with netweaver installer .otherwise you can deploy below sca files from sdm after downloading them from service market place
___DICBS*_.SCA |DI COMPONENT BUILD SERVER 7.00
___DICMS*_.SCA |DI CHANGE MGMT SERVER 7.00
___DIDTR*_.SCA |DI DESIGN TIME REPOSITORY 7.00
check sap note Note 883948
for post installation steps,you can search sdn.eeasily you can found blogs.
Regards,
Koti Reddy

I can't install RWSERVER on Window Server 2000

Dear Friends
Normally I can install RWSERVER on Window Server 2000 and 2003 with the old version of Developer Suite 10g but yesterday I downloaded Oracle Suite 10g from www.oracle.com and install on the clean Window server 2000, When install RWSERVER utility with parameter below
rwserver -install localrepserver tcpip
I got the message
'Please consult the installation guides for how to set up and run this program'
Then I go back to reinstall the clean Window Server 2000 and the previous version of Oracle suite 10g, when I install RWSERVER I don't get any error from them.
Please reply me how to solve this problem.
Hope with help
Thanks & Best regards,
Bansak K.
[email protected]

try this ,
in command prompt go to
oracle_home\reports\samples\scripts> rwserver server=repsrv batch=yes
and u give this command in one batch file and add this batch file inot systems on event
regards,
s.arulmani

OS X 10.5.6 versus Windows Server 2000 SFM

We have recently deployed a number of Macintosh (Mac Pros and iMacs) running OS X 10.5.6. When copying a directory to a Windows Server 2000 running Services for Macintosh, the directory permission are not duplicated and, more problematically, cannot be modified on the server from the Mac.
This was not a problem with the Macintoshes running OS X 10.4. Did something change between versions? Anyone know a solution?
Note: we are replacing the Windows server with an XServe, but I'm looking for a quick fix before that migration.

We have recently deployed a number of Macintosh (Mac Pros and iMacs) running OS X 10.5.6. When copying a directory to a Windows Server 2000 running Services for Macintosh, the directory permission are not duplicated and, more problematically, cannot be modified on the server from the Mac.
This was not a problem with the Macintoshes running OS X 10.4. Did something change between versions? Anyone know a solution?
Note: we are replacing the Windows server with an XServe, but I'm looking for a quick fix before that migration.

Connecting up to Windows server 2000

Hi I have an iMac running 10.3.2 on windows server 2000. When I turned the Mac on today, it just opened up without asking for me to login, when I opens up I don't have the internet and it doesn't allow me to to check e-mails on the exchange server. please help as I need to gt some work done. Thanks

Hi I have an iMac running 10.3.2 on windows server 2000. When I turned the Mac on today, it just opened up without asking for me to login, when I opens up I don't have the internet and it doesn't allow me to to check e-mails on the exchange server. please help as I need to gt some work done. Thanks

Order of upgarde Oracle 9.0.1.3 to 11g and Windows server 2000 to 2008

Hi
I need help with determining which order I should upgrade my system. I need to upgarde both oracle and os server:
Oracle version 9.0.1.3 to 11g (I know that i will have follow upgrade path as per oracle matrix)
Windows server 2000 - 2008 (I know that i=I need to go to 2003 before 2008)
My question is do I upgrade oracle to 11g first on windows 2000, or upgrade the Windows OS first and then oracle? also what are the implications if any?
Thanks.

Hi;
I need help with determining which order I should upgrade my system. I need to upgarde both oracle and os server:
Oracle version 9.0.1.3 to 11g (I know that i will have follow upgrade path as per oracle matrix)You need to be 9.2.0.8 level to make 11gr2 direct upgrade
My question is do I upgrade oracle to 11g first on windows 2000, or upgrade the Windows OS first and then oracle? also what are the implications if any?I suggest see below notes:
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Also Please check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
Regard
Helios

Migrating an Oracle Forms 4.5 application from Windows Server 2000 to 2003

We are upgrading a number of servers from Windows Server 2000 to Windows Server 2003 (Standard Edition, R2). Can we re-install Forms 4.5 on 2003 and what is involved. If not, what can we do.
Kind regards,
Malcolm

Forms 4.5 has been desupported way before Windows 2003 was ever available. So, you can be sure that Forms 4.5 is not supported on Windows 2003. You could give it a try, but you could very well run into problems.

Is Windows Server 2000 supported by 2005 or 2007?

I have a client that is wanting to upgrade to 2007 A PL48. They are running Windows Server 2000 and SQL Server 2005. All of the documentation (sizing guides) I have read only mentions Windows Server 2003 as being compatable for even the 2005 versions. They are currently running 2005 PL32. Am I missing something or is Windows 2000 not supported?

Please check thess threads:
Re: Cannot Run SAP 2007 on Windows 2000 ?
Re: Server Prerequisites
Thanks,
Gordon

OSX and Windows Server 2000 resource forks

Our shop is 95% OSX with a Windows Server 2000 server. There is one application that is sensitive to image file resource forks copied to the server. When the app does a particular operation if there are resource forks in the folder the operation fails.
Is there a way to either strip the forks on the copy operation? Or is there a way to block them in Windows Server?
BTW, the application is a dedicated print server RIP linked to a Durst photographic printer running on Windows XP.
G5 Mac OS X (10.4.6) Windows Server 2000
G5 Mac OS X (10.4.6) Windows Server 2000
G5 Mac OS X (10.4.6) Windows Server 2000

I feel your pain. I have been dealing with the same thing and found the following options:
Try turning on "Services for Macintosh" or SFM on the windows server. I am NOT a windows guy I have had mixed results when my LAN folks have done this for me. In some instances the ._rsrc files don't appear, and this won't fix long name issues if you are having them.
Another way to go w/o touching the windows server...third party.
Path Finder 4: http://www.cocoatech.com/pf4
Blue Harvest: http://zeroonetwenty.com/blueharvest/#faq
KopyMac 2.6.1b: http://www.tcsn.net/mont/index2.html
I have not tried the third party solution yet. I am still convinced there must be some way to have the mac just stop creating the files, but so far I have nothing. The only article apple has that is remotley related addresses .DS_Store files and NOT the ._rsrc files. I tries the edit to com.apple.desktopservices.plist and I still had a server full of ._bsfile.
Hope this helps, and if anyone out there has the 100% mac solution PLEASE share.
PowerBook G4 Mac OS X (10.4.6)

Need help using Windows Server 2000 JDBC Driver on Red Hat 9

I successfully have a .jsp app running on windows server 2000 using JDBC
driver for SQL Server 2000. Which I installed in order to the following
Red Hat:
http://msdn.microsoft.com/MSDN-FILES/027/001/779/install.htm
I moved the .jsp app over to the Red Hat 9 server running Tomcat, while
keeping the MS SQL 2000 on windows. The issue I have is setting up the
JDBC driver for SQL Server 2000 on the Red Hat server.
I created a folder called /usr/java/MSSQLdriver and unzipped the tar file with
the driver for SQL Server 2000. And ran the install.ksh script.
The /usr/java/MSSQLdriver/lib has the following files within it:
msbase.jar, msutil.jar, & mssqlserver.jar
I chmod 0777 each of the *.jar files.
I then went into /etc/profile.d/tomcat.sh and adding the following:
CLASSPATH=.;/opt/msSQLjdbc/lib/msbase.jar;/opt/msSQLjdbc/lib/msutil.jar;/opt/msSQLjdbc/lib/mssqlserver.jar
Each time I login and pull up the termial I get the following error:
bash: /opt/msSQLjdbc/lib/msbase.jar: cannot execute binary file
bash: /opt/msSQLjdbc/lib/msutil.jar: cannot execute binary file
bash: /opt/msSQLjdbc/lib/mssqlserver.jar: cannot execute binary file
And can't connnect to the database within the .jsp app.
Is there anyone out there using DBC driver for SQL Server 2000 on the Red Hat server?
Michael

Sorry, I needed to correct some information of where the drivers were installed.
I created a folder called /usr/java/MSSQLdriver/new and untar the Microsoft file with the driver for SQL Server 2000. I ran the install.ksh script "sh install.ksh"
installed the driver into the default directory "/opt/msSQLjdbc".
The /opt/msSQLjdbc/lib has the following files within it:
msbase.jar, msutil.jar, & mssqlserver.jar
Michael

Export session key failed: 2148073482 in Window Server 2000 SP4

I try to connect some database by ODBC connenction but when I click test on ODBC data source Administrator, It fails as error in Title
But I try to connect in windows server 2003 , It can connect
I don't know why windows server 2000 cannot
Have you any suggect how to setting in windows server 2000?
Thanks in advance

Sorry to say, but Windows 2000 is out of life cycle
http://support.microsoft.com/gp/lifean36
Thank you for understanding
Milos

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
Please don't hesitate to ask any other question. I will be glad to help you.

Error while installing Microsoft Identity Extensions Setup during installation of SharePoint Foundation 2013 on Windows Server 2012

Hi All,
When i try to manually (no internet connection on the server) install SharePoint 2013 Prerequisites on Windows Server 2012 I get the below error
I have installed .Net Framework 3.5, 4.0 and Windows Identity Foundation using Add server roles or features from the server manager.
From Software & Hardware requirements for SharePoint 2013 give
Prerequisites for SharePoint 2013 I can see that the identity extensions are available only of Windows Server 2008 R2 and not for windows server 2012. Can you please provide the link for windows server 2012?
I have installed all the prerequisites required except Microsoft Identity Extensions.
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

I fixed it by installing Microsoft Identity extensions from command line, please find command line below.
C:\Windows\System32>msiexec.exe /i "C:\SharePoint2013ServerFiles\prerequisiteinstallerfiles\MicrosoftIdentityExtensions-64.msi" /quiet /norestart
Note: In the above command C:\SharePoint2013ServerFiles\prerequisiteinsTallerfiles is the path where I had downloaded all the prerequisites for SP2013
This will install Microsoft Identity Extensions and creates registry entries, which will help the SharePoint 2013 Prerequisite installer to complete the setup
For more details check out
here
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

Errors in installation of SAP XI on MSCS windows server 2003

We have started installing our XI QAS on a MSCS running windows server 2003. We've followed the installation guide and loaded the Oracle binaries onto each node and the latest patches, have installed oracle failsafe (3.2.2) - done all the DNS & TCP/IP checks, installed abap and abap DB on central instance, and started configuring MSCS using SAPInst - all this successfully completed....
The problem we are having are:
In the Oracle Failsafe Manager, when trying to move <SID>.world from standalone resource to cluster service we get the following errors (after completing all actions on Node A - errors appear to relate to Node B) ....
FS-10890: Oracle Services for MSCS failed during the add operation
FS-10778: The database resource provider failed to configure the the cluster resource <DBSID>.world
FS-10040: Failed to create the database resource <DBSID>.world
ORA-01078: failiure in processing system parameters...
The settings are then rolled back......
I've not had any luck on either the oracle site or sap site finding solutions to these problems.
We've checked all permissions - all okay, Oracle homes are correct, Ip addresses (public and private) are all correct, and now running out of ideas...
Anyone have any ideas??
I can provide more information is needed....
Message was edited by: Barry Neaves

The line in the log right before the error messages reads:
49 09:07:17 > FS-10427: Creating database instance <DBSID> for TNS service name <DBSID>.WORLD
I assume it this part that failed..... It took ten seconds before listing the error messages.....
Any thoughts??

Installation of F2480 scanner device in Windows Server 2012

Hi,
i tried to install the drivers in Windows 2012 (x64).
That OS is not officially supported for this device but i thought the Windows 8 driver would do.
So i donwloaded the drivers (DJ_AIO_06_F2400_NonNet_Full_Win_WW_140_404.exe) but just running
this file won't work because the setup program checks for supported OSes and stops since it finds
an unsupported OS.
So the way to go is to extract the contents of the .exe, plug in the device, go to Devices and Printers,
right click on the device and add the drivers manually from the Update Driver... button.
Doing so will install the drivers for printing but not for scanning, with a "File not found" error.
To enable scanning i first had to install the desktop experience feature of Windows Server.
I am not sure that this is needed, anyways i did it.
Then i realized that in the [SourceDisksNames.amd64] section of the hpoF2400_sc.inf files which resides
at the top folder of the extracted driver files the string of the path to the dot4 drivers was in double quotes but the
one for the scanner wasn't.
So the line:
2 = %CD%,,,drivers\scanner
became:
2 = %CD%,,,"drivers\scanner"
After that change i re-run the drivers installation procedure but then Windows complained about
tampered driver files mentioning something about the hash of the files.
So i had to disable this check by running:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
A reboot was required after the above change and then the installation of the scanner drivers succeeded.
I used Paint and verified that scanning was indeed working.
Finally i re-enabled the OS check for tampered files:
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF
The whole thing took 3 hours off my life, thanx HP :-P
Cheers,
vagy

Hoe you followed below steps:
http://social.technet.microsoft.com/wiki/contents/articles/12421.sharepoint-2013-install-sharepoint-designer-2013-on-windows-server-2012-preview-based.aspx
Go to start > run > type %temp%
Here you will see some folders and file. You need to find the latest file which has installation details of sharepoint designer. Please provide us logs from this file
If this helped you resolve your issue, please mark it Answered

Un installation of 11.5.8 on windows server 2000

Similar Messages

Maybe you are looking for