Un-pausing a Network Administred printer in Mac OsX 10.6.8

The same problem as others but this printer is a network printer supported by a windows admin group.
Is there any way to edit the settings without them comming back?
I have to clear paused printers using admin password all day!
I have tried the terminal command but it tried to open the file in text wrangler and there is no text displayed in the cups/cupsd file
Thanks!

Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Similar Messages

Using a network-stored catalog with Mac OSX

Greetings all.
I am using Photoshop Elements 11 on Mac OSX Mountain Lion and want to store my catalog on a local network drive (FreeNAS). I have encountered many problems while attempting to do this. Then I noticed in the Elements Organizer help, under the section "Repair a catalog", the following: "Note: (Mac OS) You cannot access catalogs present on a network drive."
Is this true. or has someone found a workaround to the problem?
Thanks!
--John

Thanks, for that ( I assume we have to carry on in English due to forum policy even though we are both of German tongue I assume)
You mean the access problems are part of the "no network drive" thing? I suspected that. Took me a whole day in front of my computer to realign the mess. So should one better not use the network drives at all? Quite a pity in times where everybody seems to use network storage.
No, I did not use organizer to use the photos. So there is no way to reconnect them? Should I delete the catalogue and start with the photos from scratch?
Regards
Andibuch
Am 02.01.2013 um 23:35 schrieb Barbara B.:
Re: Using a network-stored catalog with Mac OSX
created by Barbara B. in Photoshop Elements - View the full discussion
Well, yes, these are part of the "no network drive" thing.
As for moving the photos, did you use organizer to move them? You will always have trouble if you move photos outside of organizer, even on the same drive--you have to let it manage your photos or it doesn't have a clue as to what happened.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4963270#4963270
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4963270#4963270
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4963270#4963270. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Pdf printing problem Mac OSX Snow Leopard Canon MP620 Pixma printer

After upgrading Adobe Reader version 9.3 to version 10 I cannot print pdf documents using Canon MP620 Pixma printer. Mac OSX Snow Leopard operating system. All other prining works OK. Never had problem before Error message "pstopdffilter/ pstocupsraster failed with err no. 13" comes up. What has happened and how do I put it right?

See this link for a solution:
http://forums.adobe.com/message/3476912#3476912

Officejet Pro 8600 will NOT print on MAC OSX 10.7.5

I'm using Mac OSX 10.7.5
New Officejet Pro 8600 is set-up and wireless is connected with Bonjour. When printing the printer utility opens and shows me that the printer is connecting. For example: "Printing Microsoft Word - Document 1". Printing page is shown as "100% complete". However, nothing prints.
I am able to print the 'Print Self Test Page' but nothing else (ie. word documents). I have the printer setup on an HP Laptop and it is working just fine over the network.
I have tried every solution under the following link and nothing worked:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477

HI, I also had this same issue and finally worked out a solution.
Just to summarise: I had two Macbooks 10.7.4, iPhone, iPad, airport express and netgear evg2000 router. They all worked wirelessly one minute then stopped. I could wirelessly connect to the printer, print test pages, view the queue, view supplies but any print would appear in the queue as 100% complete or 1% or 12% but never actually print out.
I logged in to the embedded web server (ews) on the printer, went to network, advanced settings-bonjour and changed the Bonjour Highest Priority Service to '9100 printing' instead of 'LDP'. I then deleted the printer from the print function in system prefs, re added it and it worked. I had to turn the iPhone and iPad off and on and they worked.

Cannot find c310 printer running mac osx 10.7.5

hi, I had a c310 connected wirelessly to a macbook pro running osx 10.7.5 working fine.
suddenly could not print, and message read cannot find printer.
tried following steps as described in different threads:
- restarting mac and printer
- uninstalling and resetting printers
- trying to add printer
but mac can't seem to find the printer
However both printer and mac are connected to the network. any clues on what to try next?
Thanks

additionally, printed the network configuration page and the netwrok config test page and both seems to be OK
Thanks

Any ideas how can install an old Canon BJC80 printer on mac osx 10.5 can only find windows drivers on the disk or on canons website!

Hi have just got a second hand Canon BJC-80 laptop printer and am trying to install on an imac running 10.5 I have been on the canon website and can only find drivers for windows based operating systems. Tried the add printer but nothing in the list. help.

I think the sitation with the Canon BJC-80 is a little confused. I think the Canon web site is confused.
I get conflicting information. I suggest trying Gutenprint and Gimp-Print for Mac OS X. Gimp-Print is the older name for Gutenprint.
I haven't had much luck with Gimp-Print. Hopefully you will do better.
http://gimp-print.sourceforge.net/p_Supported_Printers.php
Doesn't list the BJC-80 as support in Mac OS X.
Available in Lion
http://support.apple.com/kb/HT3669
Canon BJC-80 - Gutenprint v5.2.3
5.2.3
P
Available in Windows 7
http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type =Hardware&p=Canon%20BJC-80%20Inkjet%20Printer&v=Canon&uid=Q302340US1&pf=2&pi=4&c =Printers%20%26%20Scanners&sc=Ink-Jet%20Printers&os=64-bit

Selection printing on mac osx lion safari

How do you print just the selected area on mac osx lion in the safari browser

Hello:
In your utilities folder you will find an application called "grab."
Open it and then look at the help for the application.
Barry

Wireless printer for mac OSX 10.7.4 any recommendations

what is a good wireless printer for mac POC 10.7.4,having problems with hp 3050A

Hello Flajack,
Thanks for the post. I did some checking here and the HP 3050a is compatible with MAC OS 10.7 in a wireless environment. What kind of issues are you having? Installation? Connectivity? Maintaining a wireless connection? I've included a couple of my favorite links below to assist in getting this resolved. Check the information in these links and let me know how it goes from there. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02105426&tmp_task=prodinfoC ategory&cc=us&dlc=en&lang=en&lc=en&product=5061082#N315
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en &product=5061082&tmp_track_link=ot_search#N4595
I work for HP but my posts and replies are my own....Thank you!

Can't connect to network PC printer with Mac Pro

I have the only Mac in the house. My wife's HP Deskjet 5650 is the network printer for the family. When I try to add this printer to my Mac, it sees the workgroup, her computer and her printer.... but it won't print. It does not show a location, although under the GENERAL tab when I click on her printer icon in my Dock it shows a URL: smb://... address. Putting this smb address in LOCATION doesn't help.
How do I get connected? Thanks for any input I get.
Jeff Mirkin

First you need to make sure you are trying to connect to the correct network SSID (name). So click on the Airport icon in the menu bar and scroll down and select the name of the network. If a network requires a password it doesn't mean it's not free.

HP Pro 200 M276nw Color Printer Duplex printing with Mac OSX Yosemite 10.10

So, I have been trying to use the duplex printing feature with my Mac. However, I havne't been able to figure it out. I see the option for manual duplex printing, but the actual duplex printing feature is not working.
Any advice?

Hi @joshcooley09 ,
I see that you are experiencing issues duplexing from Yosemite. I will certainly do my best to help you.
Did you download and install the latest software for Yosemite for the printer?
HP LaserJet Pro 200 Color M276 Full Feature Software and Drivers.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Laserjet M276)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Now try and print two sided.
On the File menu, click the Print option.
Open the Finishing menu, and click the Manual Duplex tab or open the Manual Duplex menu.
Click the Manual Duplex box and select a binding option.
Click the Print button. Follow the instructions in the pop-up window that appears on the computer screen before replacing the output stack in Tray 1 for printing the second half.
If the issue persists, connect the printer to the Mac by a USB cable and test the printer. Just to rule out a network issue, if the printer is networked.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP 8500 - Cannot get network folder for scans (Mac OSX 10.5.6) to work

Trying to get the network path set up for saving scans from the printer.....I've gone into the network (Ethernet, wired) configuration for the printer at its IP address from my MacBook Pro.
Under the setting where I create a network folder to store scans, I entered the network path to a folder on the mac, enabled file sharing, and entered my user name and password.
However, when I "Save and Test" (or Test and Save, whichever), it comes back saying the user name and password are incorrect.
Huh?
I've checked this a dozen times and also tried to prefix the user name with the machine name.
What's a little disconcerting is that the instructions on this Web page (for setting up the scan folder for the printer) say to enter the "Windows" user name and password. No mention of the Mac.
Not sure what's wrong.
I entered for the path:
\\MacBookPro\Users\Mork\temp
(temp is a valid folder)
I entered the user name and password I use to login to the machine
I then get the error.
Any ideas what's wrong?
I tried to use Mac paths with forward slashes, but the Website for the printer said this was an error right away.
(Confused).
Thanks.
- M

The support for the scanning is built into the Mac. This link tells you how to do it.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&tmp_track_link=ot_recdoc/c01627041/en_...
Go to the System Preferences under the apple menu.
Select Print & Fax
Open Scanner
Click Open Scanner
The last pull down menu on the left selects the folder. Change it to what you want and you don't have to worry about the network path and it will work!
To scan, click the scan button.
I tested it and it was such a relief to see the file appear in the folder. I hope this helps someone!

Cannot print from mac OSX 10.5.8 to my HP B210 - I already reset the printer - HP utility won't open

When I try to open the HP Utility - it just sits there and does nothing - I have to force quit.
And my printer is not printing from my mac. My wife can print from her PC laptop. We use Netgear.

Let's reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
If that does not work, get the latest software for your printer from the "Support & Drivers" link at the top of this page and re-install.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannot manually print with Mac OSX 6 and ID CS3

I installed Mac Snow Leopard OSX yesterday, and now I cannot make InDesign CS3 files print manually. When I go to the printer dialog box and set Manual Print, then return to the ID Print Dialog and hit PRINT, I get the autofeed paper printed, not the manual. What happened?
Thanks,
- Mike Yanega

No, but I will download that now. Thank you.
- Mike Yanega
Message was edited by: BowfinBoy
I upgraded to the 10.6.6 version of the OS and I am still getting the same symptoms. I cannot seem to get Manual Printing from InDesign CS3.
I just tried printing from my Mail and cannot do that Manually either, so apparently there is a print driver issue?
- Mike

How do i delete a printer on mac osx 10.8.3?

I was having problems with scanning from hp photosmart 6520 printer, so downloaded hp software. Now the scanning works, but there are two printers listed and I'd like to get rid of one of them. How do I delete one?

I knew it had to be simple, but I'm new to the Mac. I did that and it worked. One more question: my scanner seems to be working, it says that the scan was successfully saved, but I can't find it in the computer. Previously the scanner had worked once and that scan went into the Finder and Documents, I believe, and was easy to find. But since I installed the hp software, I cannot locate the scan. Thanks.

Network Problem AFP/SAMBA - MAC OSX 10.4.8 (Server & Desktop)

Hi all,
I don't know if someone have already post this problem.
We have many Apple ( + - 200) as desktop (G5,G4 no Intel) and with the last 2 update of 10.4 (7&8) we have many problems with the volumes of the servers.
The servers have Linux as OS and Fullpress for Filesystem.
The linux version is : Red Hat enterprise Linux 3.
The Samba Version is : 3.0.14 a
The Full Press Version is : 15.01
10.4.7
In AFP sharing we see some folder with lock put from Old OS9 (with the other relase of 10.4 before 7 we don't see them).
10.4.8(desktop & server)
The network speed is very slow. If we copy from Server to Server or we copy from server to desktop the speed is avarage to 500-700 kb/s with 100mb or 1000mb network connection (LAN).
If we copy (with the same network setup in the client) from a Unix server with Helios the speed is more and more fast (from Fullpress 2 gb -> 2 hours from Helios 2gb -> 3 minutes)
the problem is , if we don't update to version 7 & 8 , the release 10.4.5(for example) copy the same file to server or desktop more and more and more fast (2gb from full press avg. 5 minutes).
How can we fix this?
(sorry for my english)
All Mac OS X (10.4.8) All System

"maybe change the protocol is a solution (but i can't change ) .
the "problem" is for esample if you have an Online Databank with images/xpress/indesign ( for me with fullpress and helios) and if we change the protocol we "destroy" the resources of files and something going wrong in the db(many many problems).
We must use Fullpress and Appleshare (years and years of data stored) and a change is not very easy."
Well not necessarily. Im sure your system coud be tranistioned to something new. You have all the data.. its just a matter of converting to another system. I doubt its impossible - just REALLY expensive
"For the fullpress (i'm not sure) i think to listen talk about bonjour , but i'm not sure and i don't knows the difference from appleshare (that "fullpress" says it is an old protocol).
Time ago i have also 6 Silicon with Full press but Os X don't have problem , but the Os arrived at version 10.4.5 so... The helios (in appleshare and smb) don't have problem."
Well technically i beleive Appleshare was basically the old afp protocol over appletalk, this is pre OS X (so OS n-9.x.x). Appletalk was the old apple networking protocol similar to what Bonjour is now. However now afp runs over tcp/ip and 3.0 functions more like NFS or SMB. You can access it with Bonjour networking or standard tcp/ip. I cant imagine this Full Press software not supporting that from here on out. I suspect most bureaus are all but rid of non OS X macs so it would make sense theyd let appleshare support die while moving to afpovertcp, smb and possibly webDAV and NFS.
"Now i think maybe is a problem of Linux and how manage the connection , but something change in the clients (upgrade) and not in the servers so....."
THis is most likely the case.. or something very simiilar.

Un-pausing a Network Administred printer in Mac OsX 10.6.8

Similar Messages

Maybe you are looking for