Un -subscribed calendars showing in up in some lists but not in ical
Hi
Sorry i have an odd problem that i can't seem to solve.
I'm using 10.6.4 and mobile me to sync data across multiple devices i have recently bought an ipad and on turning mobile me syncing on, some old subscribed calendars have "popped up" on the ipad (which i thought was impossible !)
e.g. UK holidays was once subscribed in ical on my mac but had been deleted - this is now showing with current events and is listed twice in the calendar drop down on the ipad calendar app
in trying to resolve this i have noticed that the once subscribed calendars do show in itunes on the info tab twice (ITUNES > MY DEVICE > INFO > CALENDARS) so they must be held some where on my mac but
1) how can i get rid of them from my mac?
2) how can i get rid of them off my ipad?
i have tried resting mobile me data on mobile me
deleting All calendars and restoring to a previous back up
none have got rid of these calendars
any suggestions would be great!
Isolating this problem will likely require obtaining the account usernames and a possibly a request to share your content with someone at Adobe. Rather than asking you to provide that on the forum, I would recommend that you forward your description to [email protected] Someone will contact you directly to obtain the necessary details for the investigation.
Thanks,
Michelle
Similar Messages
-
When I down loaded some ring tones they show up in my Music folder but not in my ringtones?
When I down load some ring tones I purchased they show up under my Music Icon but not in my ringtones
Where did you download them from? Did you drag them from the Music folder to the Ringtones folder?
iOS devices use MPEG4 audio (AAC) for ringtones. Often these files end with .m4a, but the .m4r suffixe is generally used to denote a ringtone. iOS expects a ringtone to be less than 30 seconds in length and otherwise the only other restriction is that it's an AAC audio file.
You can make your own ringtones simply enough with any audio editing application on the Mac. Just create an MPEG4 audio stream, give it the suffice .m4r, and drag it into iTunes. -
How to show attributes only in query panel but not in Add fields.
Hi,
Jdev - 11.1.1.7.0
I have a requirement where I need to show attribute only in search panel but not in Add Fields list which is available in advanced section.
Thanks for your time and help.
Regards,
Dileep.Hi,
Is it really possible implement this kind of scenario, I could not find any property to disable the attribute only 'Add Fields' but not in query panel.
Please some one confirm me this behavior.
Thanks,
Dileep. -
Games and podcasts are showing up in my source list but won't transfer
My son just upgraded from an ipod shuffle to a nano 2nd gen. I have downloaded the latest version of itunes. He bought a game and got some podcasts. They show up in the source list but won't transfer to the nano. I have tried restoring the nano but that did not help. Any suggestions?
Make sure to enable podcasts on the iPod nano. When you plug it in pick the iPod nano in the source list and then click on the podcasts tab. Then enable the transfer of the ones you want. I believe that the games are only playable on the 5th gen iPod not the nano. Sorry about that
-
How do I delete some history but not all without it crashing?
I remember that Firefox used to allow deleting of only some history but not the most recent. For example, I was able to go into Options and under the Privacy tab, I could choose for Firefox to remember the last 7 days, 30 days, etc. Now, it seems that I can only choose "Remember history", "Do not remember history", and the custom option does not allow me to choose how long I want Firefox to remember the history while deleting everything else.
When I press Ctrl-H to open up the history on the side, it shows all the history from a very long time. I remember I used to be able to right-click on a folder (say several months back) and delete it all. Now if I try to do the same thing, it takes a long time and essentially crashed.
I do not know why these features were removed but Firefox is very difficult to use as a result of that now. Could you please help me out with this?
Thanks.If you have problem with deleting the history in the Library then you can delete the places.sqlite file in the Firefox profile folder.<br />
Note that this will remove all history (you can copy/paste or drag history items to a bookmarks folder).
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Current Firefox versions do not have a time limit for the history.
Firefox determines automatically how many pages can be kept without affecting the performance.
You can see the current value via the read-only pref places.history.expiration.transient_current_max_pages on the about:config page.
See Marco Bonardo's blog about this:
* http://blog.bonardo.net/2010/01/20/places-got-async-expiration
*Expire history by days: https://addons.mozilla.org/firefox/addon/expire-history-by-days/ -
I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark -
My iPhone4 docks correctly with some devices but not others, please help!
Hi,
Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
*Phone used to dock fine with anything and everything - this was about 1 year ago.
*for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
*symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
*I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
*I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
*2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
* now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
*just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
to my knowledge it is NOT;
- a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
- a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
-a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
could it be a problem with the data exchange between phone and device when it is docked??
or do I really need to try changing the port for an 'official' one??
or is it just broken and that's that?!It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!
-
HT2513 my iCal shows events in the "month" view but not in the "week" view? why is that?
my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes
my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes
-
Last night I tried to sync my Iphone 3GS to my laptap because I had a lot of new music. What happened was, at first I lost all my music, photos, and all my contacts (all phone numbers). I was able to retrieve some music, not the new ones, some photos but not all, and none of my contacts. What did I do wrong and how do I get my songs/contacts/photos back.
Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books. -
Table borders show up with Firefox or IE but not Safari (Win or MAC)
This very simple site (http://www.brandondean.net) has two table borders that show up under FF and IE but not Safari (either Win v4.0 or Safari for MAC, same result). I'm not an expert but I did the work using Dreamweaver 2004 MX as XHTML compliant, tested every page at W3C.org to make sure they comply with XHTML, and they do (except for my not putting in "alt" on images). I even downloaded Dreamweaver CS4 to run the "clean up the code" command and nothing is fixing the problem. I'm hoping someone out there has seen this before and can help us out. Thx.
Hi Gary,
It's probably just because the border widths you are specifying are too small (or WebKit is interpreting picas differently to Firefox/IE - I say WebKit as the same problem is visible in Google Chrome and that uses WebKit like Safari as well).
Try setting using this instead:
.borders {
font-family: Verdana;
font-size: 10px;
font-style: normal;
font-weight: normal;
font-variant: normal;
color: #cccccc;
text-decoration: none;
border: 1px solid #888888;
That seems to do the trick for Firefox and Chrome on this Linux machine I'm using at the moment. -
Question: I bought a 5 yr old Mac G5 OSx 10.4.11, 2 GHz intel Core 2 Duo processor, 1GB 667 MHz DDR1 SDRAM memory. It works fine but I can't get Thunderbird, Flash Player or Adobe reader to install -- it shows up on desktop as download but not App folder. Why?
The downloads are probably .dmg files (disk images). You would open the disk image (double-click it) to find the application or an installer. If it's the application itself, you then drag the application to your Applications folder to "install" it. If it's an installer, double-click the installer to run the installer that installs the application.
NOTE: If you iMac is Intel, it's not a PPC G5. -
How do I get albums and songs I have purchased back on my devices? They show up in my purchased list but when I click on them a little circle shows up with an x in it and it won't let me do anything with it. Any guidance would be greatly appreciated.
The Get Info. fields show up gray if the files is locked and iTunes knows it can't edit the file. Make sure the files are not marked as read only and, if necessary grant both your account and system full access to all files and subfolders of your media folder.
You can set Part of a Compilation for multiple tracks from the Options tab of Get Info.
See Grouping tracks into albums for tips on getting iTunes organized.
tt2 -
HT204370 A movie shows in my purchased list but not in the Movies list...
A movie shows in my purchased list but not in the Movies list...
The purchase history on your iTunes account will only show purchases from the iTunes stores (iTunes, app store, ibookstore, Mac app store), not from Apple online or bricks-and-mortar stores.
Does anything show on your credit card ? If the email is genuine then it's possible that your and their email addresses are similar and that they gave the wrong id (or the store typed it incorrectly), it doesn't necessarily mean that anybody has access to your account.
For the contact, you will initially just receive an acknowledgement email, the proper reply may take 24 (possibly 48) hours. -
There are two types of Backups that I can make for iDevice (for a example for iPhone - backup to iCloud or/and to the local PC/Mac.
Both are the current Backup, so my question is - Is it possible to save a several Backups of an exact iDevice, for example of iPhone (some history, but not the last one only)?ITunes keeps 1 backup file only.
Icloud keeps 3 backup files. -
Migrate SOME apps but not all?
Is it possible to use migration assist to migrate SOME Apps but not all of them? If so, how?
No. Migration Assistant will transfer the entire folder but you cannot selectively transfer individual applications. However, you can simply copy items from the Applications folder to the other computer via Target Disk Mode without the use of MA. Although this will work just fine it will not automatically include any other associated files needed by the applications transferred such as Applications Support files, preference files, or other installed files. Therefore, it would be better to simply reinstall the individual applications or transfer all of them, then delete what you don't want.
Maybe you are looking for
-
How can I move data from one loop to another?
I am using LabVIEW to record and display data. The problem that I have run into is that if I try to collect and display the data all in one loop data points are lost because the loop takes so long to execute. I decided to break my program into two
-
Am I crazy? The manual shows effect automation that I can't access.
Humor me. Take a look at the pdf manual on page 363. It shows effect parameters that can be automated, but I can't bring up any on neither track, bus, nor submix. I can add effects, but none have shown the boxes in the automation column that the pdf
-
I need to get back to my older version of Firefox - my computer won't accept Firefox 4 - how can I find my older version I had that I told to replace with Firefox 4.
-
I lost some pictures when I updated to iOS 5.
I followed the procedure to update to iOS5. Backed up using iTunes, Upgraded and then Restored. Everything else sems to be working fine, but all pictures that were not inside the Camera Roll are lost. How to I get them back? Are they included in the
-
What are the consultant roles in Upgradation or migration project
Hello , Would you please any dody help me to provide the role & responsibilities of consultant in SAP upgradation or migration project.Thanks. Regards, Sampally