Un wanted effects and problems when using record mode

Hi guys,
With one particular project Im working on Ive come to a brick wall. Suddenly I couldnt record any software instruments without it being out of time, quanitizing the beats (Ultra Beat) like triple the speed of the BPM. So I cannot lay down anymore percussion tracks. Also with synths or any other software voice I go to use, It seems to affect other recorded tracks. They jam and play one note or distort. Its a complicated one and hard to explain really.
I have tried freezing the tracks and removing any master effects to minimise CPU overload thinking that may be the issue but to no avail.
Im not well up on Bus ing but there does appear to be some bus ing set up on tracks, this must have been set up by a preset or template because as I said Im not to well informed on busing. As I learn about it currenlt, I wonder is there some effect through them causing the software instruments to speed up and act weird??
I dont have this issue with other projects, just this one.
Hope someone can help. Thanks!

Thanks very much for the blog. But I already knew this as I checked it before. Now my issue is our logic is brining -ve values in to Infocube...Here is what I have in ODS Active , Changelog and Cube. I want to make the cube result same as ODS active data:
Active:
OI_EBELN   OI_EBELP DOC_CAT COMP_CODE PUR_GROUP ORDER_VAL PO_ITEMS
4700020064       10 F       1004      907       10.000,00    1,000
Changelog:
   OI_EBELN   OI_EBELP DOC_CAT COMP_CODE PUR_GROUP    ORDER_VAL PO_ITEMS
                                                 20.000,00    2,000              2              0
Infocube:
COMP_CODE PUR_GROUP    ORDER_VAL PO_ITEMS
          10.000,00     6,000-     0     1

Similar Messages

-ve values when using record mode in ODS delta

Hi
We have an ODS where we are calculating the number of items using update routine. I'm not sure if the below code is correct.
I'm getting -ve values in my item count for delta loads from ODS to cube. ODS data (active) looks correct. But Cube data is showing -ve item count. I guess I should remove the below code to count the number of items correctly ( if COMM_STRUCTURE-recordmode EQ 'X' ) from ODS update rules . Can any one please go through below and advice.
IF COMM_STRUCTURE-PROCESSKEY = '001'        "Purchase Order
    RESULT = 1.
         if COMM_STRUCTURE-recordmode EQ 'X'.
         RESULT = -1.
         endif.
ELSE.
    RESULT = 0.
ENDIF.
Thanks
Sam

Thanks very much for the blog. But I already knew this as I checked it before. Now my issue is our logic is brining -ve values in to Infocube...Here is what I have in ODS Active , Changelog and Cube. I want to make the cube result same as ODS active data:
Active:
OI_EBELN   OI_EBELP DOC_CAT COMP_CODE PUR_GROUP ORDER_VAL PO_ITEMS
4700020064       10 F       1004      907       10.000,00    1,000
Changelog:
   OI_EBELN   OI_EBELP DOC_CAT COMP_CODE PUR_GROUP    ORDER_VAL PO_ITEMS
                                                 20.000,00    2,000              2              0
Infocube:
COMP_CODE PUR_GROUP    ORDER_VAL PO_ITEMS
          10.000,00     6,000-     0     1

HT1414 when i facetime somebody they cant hear me, and also when i record a video the sound is muffled. there isnt a problem when making a phone call. any solutions?

when i facetime someone they cant hear me, and also when i record a video there is no sound, however when i make a phone call there is no problem. any solutions?

When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
I also have this problem...........

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Ulf Magnusson, Sweden

I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
Ulf, Sweden

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

I have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

i have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

sounds like ur ipod's mic is blocked with something check the back on the ipod near the back camera

Unable to insert date and time when using date datatype

Hi
I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
Thanks

user633278 wrote:
Hi
I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
ThanksYou most certainly can save the time. A DATE column, by definition stores date and time. What you describe is a presentation problem, and setting nls_date_format at the system as an init parm is the weakest of all settings as it is overridden by several other locations.
without seeing the exact sql that produced the error (not just your description of what you think you were doing) it is impossible to say for sure.
However, I'd suggest you read http://edstevensdba.wordpress.com/2011/04/07/nls_date_format/

Problem when using About Operator in Contains Query

Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id           NUMBER(10)      NOT NULL,
name         VARCHAR2(200)   NOT NULL,
description VARCHAR2(4000) NOT NULL,
price        NUMBER(7,2)     NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
      1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
      1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
      0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
      0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AM

Hello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck!

Can you share your keyboard and mouse when using S...

can you share your keyboard and mouse when using Skype Screen share?
I want to give a remote user access to a application on my computer. Is this posisable with Skype?
Can you share just one application on yourscreen and not the complete screen?

you can share both your entire screen, or just a specific window of program in your computer. it is not possible to give someone a remote access to your computer through skype, and it is also not possible to share your mouse and keyboard.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Coercion problem when using Shared Variable

I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip ‏38 KB

Hello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments

Performance problem when using CAPS LOCK piano input

Dear reader,
I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
Thanks and regards,
Tim Metz

Does your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?

I recently upgraded to the latest version of FF and now when using a webmail client I am routinely logged out when I try to search e-mail. Why? I go to IE and it works... but, I hate IE.

I recently upgraded to the latest version of FF and now when using a webmail client I am routinely logged out when I try to search e-mail. It works in IE, but I don't like or want to use IE.
== This happened ==
Every time Firefox opened
== Today

Unstable means it can vary in stability day by day as it can be crash prone to being stable. Features can be a work in progress for a while. The May 24 Nighty build was crash prone for a lot of testers for example.

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks Pete

Hi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model:          ATI Radeon HD 4850
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x944a
Revision ID:          0x0000
ROM Revision:          113-B9110C-425
EFI Driver Version:          01.00.383
Displays:
iMac:
Resolution:          2560 x 1440
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Connection Type:          DisplayPort
Cinema HD:
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          2A80273WXMN
Mirror:          Off
Online:          Yes
Rotation:          Supported

Un wanted effects and problems when using record mode

Similar Messages

Maybe you are looking for