Unable query button move order

please help,
I want to query move order in wms,but there is no query button appear. is it something wrong with the setup?or is it a bug?
anyone please help..thankyou.

pls help me on the below issue..
After creation of move order i m unable to query it again. While i m trying to query the same order in shows "no data to be retrieved".
But i can do transact move order for the same.
Is there any setup issue or anyother issue?
Thanks in advance...

Similar Messages

Unable to compile Move order pick slip report using report builder

Hi, I'm unable to compile the Standard Move order pick slip report using report 6i. I'm getting the error "wrong no of or types of arguments in call to "RUN_DETAIL_ENGINE". Please help.

Hi,
Looking for some help on this.
Thanks in advance!
Venkat

Error when attempting to allocate a pick wave move order

Hi All,
We have a Sales order booked and pick released with Auto Allocate='No'.The lines on the sales order went to "Releases to warehouse" status and we need to do a move order. We Queried the move order and when checked found that the Allocated Quantity on the transact Move orders form is shown as Zero(normally when pick released with Auto Allocate='No' it should show the allocated quantity as null but i dont understand why its showing zero quantity??)
When attempting to allocate this pick wave move order by selecting the "Allocate" button , the following error occurs.:INV_PICK_RELEASE_PICK_CONFIRM_FAILED
Could any one help in transacting this move order please?
Thanks,
PV

Hi PV;
What is your EBS-DB and OS?
Please check below notes and see its helpful:
Get Error INV_PICK_RELEASE_PICK_CONFIRM_FAILED When Allocate Move Orders [ID 365082.1]
Bug 9720530: INV_PICK_RELEASE_PICK_CONFIRM_FAILED WHEN ALLOCATING A PICK WAVE MOVE ORDER
Bug 4436721: DATAFIX: UNABLE ALLOCATE MOVE ORDER, INV_PICK_RELEASE_PICK_CONFIRM_FAILED
Ps: If non of helps you please search word as "INV_PICK_RELEASE_PICK_CONFIRM_FAILED" in metalink.There are already 17 docs avaliable
Regard
Helios

Unable to edit Flash file - Can't enter inside buttons/movie clips.

Hi
I am in the middle of creating a website using Flash CS5. I opened up my .Fla file one day to continue my work but I am no unable to access buttons and movie clips. When creating movie clips or buttons I am unable to get inside them, when I hover my mouse over them there is a white hand icon which never used to be there it was always just a normal mouse icon. I double click to enter inside the buttons/movie clips but nothing happens. This happens to existing movie clips and buttons on the page and even when I create new ones. Can anyone please help.. I really don't wanna have to start this website again!!
thanks!

Hi,
This would normally happen when you have a Button symbol on stage and the 'Enable Simple Buttons' setting is enabled.
Can you check in your Control menu, if the option 'Enable Simple Buttons' is enabled? If it is, click on the option to disable it and then try double clicking on your symbols.
In case you still face the issue, can you send across your test file for investigation.
Thanks!
-Nipun

Unable to Allocate LPN to Move Order

Hi,
I have a LPN (RMP00001) with 2 Lots (LOT1 & LOT2) packed in inventory.
Created a Sales order and booked it.
Perform Pick Release and generate Move Order.
In Move Order while i am trying to allocate, it is allocating the LOTs but not the LPN.
My requirement is, it should allocate to the LPN.
Could you help me to resolve the issue.
Thanks,
Tushar

Arif,
Thanks.
I have test it works.
But i m facing another issue.
i have 2 LPN with 2 LOTS each.
I have reserved it, create pick release and allocate to move order.
Now i have 4 task id for 4 LOT each i.e. in move order i have 4 line, each line is allocating to signle LOTs no to LPN.
Is it a standard behaviour or i am missing some thing.
Also i am facing some issue with task id.
When i have 2 task id for 2 Lots of an LPN and i put 1 task id for LOAD & DROP then it is giving asking me LPN and LOTs.
When i enter LPN & LOT again it ask for LPN to confirm.
And when i enter the LPN number again it is not taking and messaging "INVALID".
Can you please give me specific solution to resolve my isse.
Thanks,
Tushar

VVVIMP : Approval hierarchy for Move Orders in Inventory

Dear Gurus,
First of all Wish you all a Very Happy New Year 2011.
Now the query is : We are using Move Order Requisition flow for one of the requirement. After doing all the setups for Move Order Approval, System is not triggering Approval Process.
Infact once i click the "Approve" button ideally the system should change the status as to "Pending Approval" but it is getting approved.
What could be the issue and how to trigger the workflow. Please suggest me and give me your inputs ASAP.
I am in desperate need of this. Please share with me if you have any document.
Regards,
Aditya

Dear Sabari,
Thank you for your reply.
Yes all the below Setups are being done Properly. Again i have cross checked also.
Step 1. Employee got created correctly
Navigate>Human Resources responsibility>People>Enter and Maintain - Done
Step 2. Employee got attached to the planner correctly
Navigate >Inventory>Setup>Planners - Done.
Step 3. Employee got attached to the User correctly
Navigate>System>Administrator>Security>User>Define - Done
Step 4. Item got attached to the planner correctly
Navigate>Inventory>Items>Item master - Done
Thanks & Regards,
Aditya

How to restrict Sales Order LOV in Transact Move Orders

Hello
We would like to restrict LOV in the Transact Move Orders screen to only those orders that were created in that specific Operating Unit. Also, we would like to control the LOV for Release Rules to a specific OU.
I believe the LOVs for both these screens pull from MTL_SALES_ORDERS. Therefore, I guess we would need to create a Value Set of type Table, value will be SEGMENT1 (Sales Orders) but unsure about the where condition.
Any help would be appreciated.
Sanjib

Sanjib
Release Rules: Why don't you use the SRS version if pick releasing rather than the screen. Ofcourse you lose some flexibility to enter order number and customer information. If screen is a must you can take the LOV from the existing form and create a new record group in the new form instance trigger. Add this peice to the lov sql to control the pick release rules result:
(select 1 from org_organization_definitions cust_org
where org.organization_id=cust_org.organization_id
and operating_unit=FND_PROFILE.VALUE('ORG_ID'))
This org is mtl_parmeters table used in LOV.
2. Transact Move Orders: Instead of changing the LOV and playing with the Sales Order Flexfield, you can use the inventory organization security to control who can do a transaction. This will not change the LOV but definitely will control the access to the records after you have queried. As you know this is inventory or warehouse function not the OE function.
You can try one idea though:
Segment2 is order_type which is OU specific. You can create value set that picks the LOV from the order types table for a specific OU, assign that to the segment2 and create a security rule. This rule will have include and exclude rules. You include all the Order types that are in a specific OU and assign that rule to the resp of that OU where move order is transacted. This will limit the LOV of the order types to only those that are availble for that resp. I have not tried this but give it a shot.
Thanks
Nagamohan

Unable to close the order

I am unable to close the order ...system hown this error messgae please any one guide me in this issue
Unprocessed future change recs for order 1002655 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 1002655. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations
Regards
GSD

Sesidhar gollu,
Well try to reprocess your order by using T-code COFC which will reprocess the future records. Try this and then ping me any questions if u have.
Regards,
Madhu.G

Auto allocation for a move order with an expired lot doesn't work

Hello everyone,
We are facing a major problem regarding the use of move orders for issuing expired lots.
Scenario:
1. Create a move order. Fill in: Item, Qty, Source Subinv and Lot. Lot is expired.
2. Approve move order.
3. Run "Move Order Pick Slip" with "Autoallocate Unallocated lines".
4. Open Transact Move Order Form. Try to transact.
Result:
No allocations were created.
If we check row and push "allocate" button result is still "None".
Only way to finish the process is to open "View/Update Allocations" and pick a locator manually.
We work with a lot of expired lots, and doing that manually is a lousy workaround.
Does anyone know if that is standard functionality? Because documentation does not refer this issue.
Thanks,
Aaron

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

Unable to view Purchase order in Receiving Transactions

I am unable to view Purchase Orders in OPM (Recieving transactions- when i query up my Receipt transactions)
I want to be able to View the PO by going to Tools -> View Purchase Orders

Hi,
I believe you are missing a sub-menu which facilitates to open the purchase order on the the responsibility menu you are working with. This is the cause for the issue I guess.
Please refer the below note:
Receiving Transactions Summary - View Accounting - Function Not Available To This Responsibility (Doc ID 865884.1)
Note: In the above note, when trying tools > View accounting in the same form the user get the same issue. Similarly as solution proposed by the note, adding the missing sub menu to the menu will allow you to view the purchase order.
Please add the purchase order view sub menu on the responsibility menu you are working with and check if the issue is solved.
Please try this in your test Server and migrate the solution to the PROD.
Hope this helps!
Best Regards

Order Management Implementation - Configurator and Move Orders

We are in the process of implementing Order Management (11i) version. We have been facing the following issues:
a. Configurator button on order lines form does not open for PTO models - we are not using the Oracle configurator, but are interested in manually choosing the options during Order entry - the form does not open, despite the fact that we have set up the profile,BOM:Configurator URL of UI Manager, as per the suggestions of Oracle.
b. Issues around using Workflow for Move orders - basically, suggested set ups in Organization parameters have been done, but do not see specifically that the workflow process has been started, when saving a move order.
Does any one been successful in getting through either of the issues - any input is highly appreciated.
null

we did face the same problem whes the configurator button was pressed nothing opened up. We applied patch set B and that took care of the problem.We are going to use Oracle Configurator and not BOM bit do have configurator developer installed yet, so are creatinf bills in BOM and selecting the model to order through the sales order screen and choosing the options etc by clicking on the configurator button.The order gets saved but does not gets over to receivables as the workflow process that needs to be run(as per oracle) does not seem to be doing anything at all. There are so many bugs especially in OM that it would take sometime for it to stablize.
Let me know if you need to the specific things that we did to make the configurator screen to appear.

Unable to create transfer order ,

hi
unable to create transfer order with t-code lt06 after receving production order.tell methe process.
thanks in advance.

Hi,
Hope you are creating transfer with ref to material doc which is created after issuing goods to production.
Check in customizing for that movement type in WM.
SPRO-IMG-Logistics Execution-Warehouse management-Activities-Transfers-Define Movement Types
also
Check
SPRO-IMG-Logistics Execution-Warehouse management-Interfaces-Inventory Management-Define Movement Types.
Can you elaborate error, like what type of error you are getting.
Regards
Ravi shankar.
Edited by: Ravi Shankar H N on Oct 28, 2008 6:58 AM

Ability to capture Move Order Transfer Receipts at destination sub-inventor

Dear All,
We are currently in the process implementing multiple customization's to existing oracle business suite. I would like to clarify a below point regarding move order transfers.
I am aware that for inter-organization transfers, there is standard oracle feature to record the receipts at destination inventory organization.
However, in the standard oracle there is no feature to record the receipts at a sub-inventory for a move order transfer. This is a major concern as we are unable to account for good lost /pilferage in transit.
Since we are going ahead with customization, can anyone please reply if they have performed a similar action of customization or an alternative method to capture receipts for move order transfers.
Thank you in advance for any replies/suggestions..

Please, if you have success with this ability i really want to know the result.

Unable to view planned order from exceptional summary window

Hello All,
I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for other exceptions, on click of exceptions details it shows up the items but unable to take any actions.
I have tried by giving large no of days to view recommendations in preference.
Can someone help me to reslove issue.
Thanks,
Edited by: user604737 on Jul 18, 2011 6:09 AM

We don't have any query built on the exceptional window. As I am able to view below recommendations
Recommendations
Discrete Jobs 8
Purchase Req 27
When we click on discrete jobs/purchase req, its not showing any planned orders in supply window.
Can you please let me know, which is the backend table which stores supply information which are displayed in exceptional window.
Edited by: user604737 on Jul 18, 2011 9:15 AM

2nd g. shuffle - move order of songs on the shuffle after syncing.

I used to be able to change the order by just moving songs up or down. i can no longer do so. also, when i copy playlists across they come across alphabetically rather than in the order of the playlist. I have tried using "sync" and also "manually mangae" songs - and both seem to have the same problem. The songs copy across in alphabetical order rather than by the NUMBER order I have in the playlist and I am unable to change the order by dragging songs up or down once they are on my shuffle. very frustrating as i cannot effectively create a playlist. thanks in advance for any help.

Since you are putting playlists on the shuffle, it must be 3rd or 4th gen, is that correct? It also sounds like you have the iPod set to Manually manage music (not automatic syncing), is that correct?
When you select the shuffle in the iTunes sidebar, under DEVICES, you can drop down the content categories indented under the shuffle. If you select Music there, I don't think you can change the song order in the list to the right, except by sorting it using one of the column headings. But, if you select a specific playlist there, you should be able to change the order of the songs on the list to the right.
Also, in a playlist, make sure you have the left-most column heading (the one with the sequential numbers below) selected as the sort order. If another column, such as Name, is select, it sorts by that column and you can't move the songs around on the list.
Edit: I see that the title of this topic says 2nd gen. Sorry about that... I'll leave the above as is for anyone else reading, and in case your shuffle happens to be 3rd or 4th gen.
With a 2nd (and 1st) gen shuffle, the shuffle itself acts like a playlist. So when you have the shuffle selected in the iTunes sidebar, on the Contents tab to the right, where the list of songs is shown, make sure the left-most column heading is selected (as I noted above for playlists in general). If another column, such as Name, is select, it sorts by that column and you can't move the songs around on the list.

Unable query button move order

Similar Messages

Maybe you are looking for