Unable run report to the paper design
Hi,
In my reports, using 150 update statements .
suppose I l add ed one update staement, I could not run the reports
It shows "Unable run report to the paper design.
Waht is the problem ?
Please help !
Regards
Thank you very much for response
updatation for closing stock value arrived from complicated calculation
otherwise every time we have to calculate and it will take some more times.
My qurries
function CF_34Formula return Number is
begin
IF :RC_POST = 'Y' THEN
UPDATE COST_RECON SET VALUE = :G100QTY WHERE SNO = 94 AND YR_ENDED = :YR_ENDED;
UPDATE COST_RECON SET VALUE = :G100RATE WHERE SNO = 95 AND YR_ENDED = :YR_ENDED;
UPDATE COST_RECON SET VALUE = :G100VAL WHERE SNO = 96 AND YR_ENDED = :YR_ENDED;
UPDATE COST_RECON SET VALUE = :HAVG1 WHERE SNO = 97 AND YR_ENDED = :YR_ENDED;
AND SNO=98 ... and so on...
commit;
return null;
end if;
When I run the report, its show the above error.
When I removed one update statment (any one), it working fine
This is my problem
Similar Messages
-
Get a Report crashed error while running report using the mode character
Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent. -
Reports Server/running reports on the web.
I am trying to configure my web server to run reports on the web. I have followed the instructions provided by Oracle, but some is not clear. When i try to run report on the browser, i get the following error:
CGI Error
The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are:
Oracle documentaion say the following about the steps to configure the web server:
1-Start your Web server by entering the following:
2-Start your browser.
3-Create a listener.
4-Configure your Web server mapping and note the physical and virtual directories. For example:
I have done all the steps above except creating a listener. The documentation doesnt explain that step at all.
I have created a cgi-bin directory and made it excetable and copied the rwcgi60.exe from reports server machine to the web server machine. I also copied the TNSNAMES entry for the web server from the reports server machine to the web server machine.
Here is the command i use(just trying to make sure that web CGI is responding, but it doesnt work)
http://web_server/scm/cgi-bin/rwcgi60.exe
Other question: On the server machine, i have 3 oracle directories: ORA81, ISUITES, 806, which one should be the home directory for the reports to work on the web??
I am using oracle 8.1.7 with 9iAS release 1.
ThanksPlease note that our CGI servlet is only used as a migration point for
people with legacy CGI. It is not intended to support people with new
development to -- we encourage you to use JSP and servlets.
Thanks,
Michael
Savitha wrote:
>
Thanks Wei,
Savitha
"Wei Guan" <[email protected]> wrote in message
news:8itate$332$[email protected]..
Yes, WebLogic has CGIServlet to handle CGI, refer to document for details.
Cheers - Wei
Savitha <[email protected]> wrote in message
news:8isq8i$ocn$[email protected]..
Does Web logic Support CGI ?
Need to connect the Web Server with the Oracle Reports Server running
on
a
separate machine.
Which is to be referred to as CGI_Virtual Directory?
Thanks ,
Savitha
Thanks,
Michael
-- BEA WebLogic is hiring!
Check our website: http://www.bea.com/ -
How can we run reports from the front enf of iProcurement...
Hi Guys,
I need to create a link to run reports from the front end in iProcurement webpage instead of using apps SRS to run the report...
help needed...
thanks
amanHi Tapashray,
That was a great help. Thank you so much. A few more clarifications needed sir..
I refered to a previous link and came to know about a prcedure he followed for a report. So is it the same way that is to be done... I pasted a descr what he said in the thread. In ur solution, you said, have a link bean. what do u mean by that. After i go thru all the steps what this guy told.
It would be of gr8 help if you kindly look in to this for one more minute sir..
thanks
Creating a new report in 11.5.9
Re: Creating a new report in 11.5.9
Posted: Mar 11, 2005 7:12 PM in response to: dhergert Reply
Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region -
Issue with running reports on the portal
Hello Guyz
1. I have a question regarding running reports on the portal.
2. I have standard web templates that have been installed in BI.
3. But in the portal, we are not able to run these reports.
4. Do we need to create custom I-Views or can we install them from business content?
5. Can someone explain the process to me AND also any other issues that we might have?
Thanks.Hi Srinivas,
Standard web templates doesnot get installed with attached queries.Create custom web templates in WAD and attach ur queries based on the type of display u like either tabular or graphical.In order to diplay in portal you have to attach webtemplates to iViews and then group iViews to worksets and attach to portal roles.Then add those roles to portal users.From BI Prospective u just create web-templates and give technical names to EP consultants if you have any then they can takecare of rest.If you want to call standard web template 0ANALYSIS_PATTERN from portal you need to have Business Explorer role added to ur user in EP.Using that template u can only open one query at a time and execute.Hope its clear
Chandu -
How to run long running report in the background
Oracle Application server 10g
I need to run the long running reports in the background because while the report is running the cursor is loading and the control doesn't return to the user
this feature exist in oracle 6i by set the following parameter
RUN_PRODUCT( REPORTS, 'r_1', ASYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
How can I accomplish the same in OAS 10g?Hi,
I've done this in 11g. I think it will be the same in 10g as well
Following are the steps in 11g using run_report_object.
1. Read metalink note: Using the Reports Server Queue PL/SQL Table and API - RW_SERVER_JOB_QUEUE [ID 72531.1]
2. Implement RW_SERVER_JOB_QUEUE table as per above notes.
3. When submitting report run it as background
a. SET_REPORT_OBJECT_PROPERTY(lo_report_object, REPORT_EXECUTION_MODE, ASYNCHRONOUS); -
SET_REPORT_OBJECT_PROPERTY(lo_report_object, REPORT_COMM_MODE , BATCH);
4. Display the job_id to user (notification).
5. Create a new form to view reports base on on RW_SERVER_JOB_QUEUE which provides you the status, etc.... (you may have to create a way to identify the username who submitted the job. This way not all users will see the jobs in RW_SERVER_JOB_QUEUE )
6. Optionally you can use NOTIFYSUCCESS=email to notify user when the report is finished.
Cheers
LS -
Unable to run reports from the unix command line
hi
all of a sudden i am unable to run reports ( on App server 10g) either from the unix scripts or from the unix command line. But i can run them from the forms.
Any one have any idead about this.
Thank youthanks all for replying
i have set the env variables for the session and it worked. Looks like i have to set the oracle_home and ld_library_path every time ( opening a new putty session) i call sqlldr.
But in a whole i am trying to run sql loader from the forms. Right now we have Oracle app server 10g which forms 10g version. As oracle app server 10g didnt come with sqlldr, we are copied the sqlldr of database on to app server with different home. after this we can run sqlldr ( on app server ) from unix scripts but not from Forms. Then we opened a qurey with oracle about app server 10g not commig with sqlldr and its remedy . But they said that they dont have specific remedy for that and suggested the same what we did.
So we came up with java package which does the same funtion as host command and trying to run sqlldr which is on the database( ie replacing the host command in the forms with the database funtion). By using that funtion i am able to run the sqlldr from sql plus but not from forms. I couldnt easily debug it as i wont through any error messages.
Any one have any idea of this ...
Thank you -
Error when running reports on the WEB
Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
ThanksHello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj -
Run report cause "The page cannot be displayed" OR The connection with the
Hello,
1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2
2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2.
Problem explanation
one of our branch which is connected via leased line is unable to run some of the reports if the report have a little more
data,
one report i tried its size is almost 900k ( they are using the same line since last three month and they are
able to run all reports before, bandwidth is 128k), if you run report browser search a little while
for output then displayed "The page cannot be displayed" if you look at the report log it's finished successfully.
I try to download the report rather opening in browser it reach to end of in downloading window at the end it display
this message
Internet explorer can not download getjobidxxx.xls from oracleaps.domain.com
The connection with the server was reset.
I want to mention one more thing there is a ISA server and firewall in between client and Server but its the same condition
for
head office client but they are able to run all report with out any error.
any one have idea??
Thanks and Regards,
KhawarHello,
Thanks for reply, I have posted Service Request to Oracle Metalink and finally resolve the issue, they suggested me the following solution( a note has also been posted in Knowledge Base no. 871016.1 )
Webcache KeepAlive timeout is reached. (The default value for KeepAlive timeout is 5 seconds)
Increase the Keepalive time in webcache to a higher value
**************EOF******************
Thanks and Regards,
Khawar -
Not able to run report in the background
I'm working in SCM 5.0.
I've created a function module to run report /SAPAPO/BACKGROUND_SCHEDULING in the background but when I execute it the report is prompted (i.e. is not running in the background). The function module code is the following
if i_vrsioid is initial or i_tproid is initial or i_proprf is initial.
submit /sapapo/background_scheduling
using selection-set i_variant
with simname = i_simname
exporting list to memory and return.
else.
submit /sapapo/background_scheduling
using selection-set i_variant
with vrsioid = i_vrsioid
with tpro_id = i_tproid
with thelp_id = i_thelpid
with proprf = i_proprf
with simname = i_simname
exporting list to memory and return.
endif.
endif.
Can you help me understand what is wrong?
Many thanks,
Diegohi in fm you can not use Submit or call transaction..
try this way...
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = job_name
IMPORTING
jobcount = job_nr .
IF sy-subrc <> 0.
ENDIF.
jobs-report = '/sapapo/background_scheduling'. "report name
jobs-variant = 'i_variant'. "Variant name
wa_authchknam = sy-uname.
wa_pri_params-pdest = 'MP18'. "Print parameters, output device
wa_pri_params-plist = jobs-variant. "Print parameters, text for cover
wa_pri_params-prtxt = jobs-variant. "Print parameters, text for cover
wa_pri_params-prnew = 'X'. "Print parameters, new spool requ
wa_pri_params-prsap = 'D'. "Print: SAP cover page
wa_pri_params-prunx = 'D'. "Print: SAP cover page
wa_pri_params-prabt = 'X'. "Print parameters, new spool requ
wa_pri_params-paart = 'X_65_132'. "Print parameters, new spool requ
wa_pri_params-armod = '1'. "Print parameters, new spool requ
CLEAR wa_pri_params.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
authcknam = wa_authchknam
jobcount = job_nr
jobname = job_name
priparams = wa_pri_params
report = jobs-report
variant = jobs-variant .
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = job_nr
jobname = job_name
strtimmed = 'X' .
IF sy-subrc <> 0.
ENDIF.
Regards,
Prabhudas
Edited by: Prabhu Das on May 19, 2009 11:50 PM
Edited by: Prabhu Das on May 19, 2009 11:57 PM -
Hello
i am trying to run a report on the web but it does not ,
i have a form from where i am calling a report using
run_product built-in, it does not respond nor give any error
message, what can be th problem
the report server has been set.
please can any one you who have tried these help me out
Vishnu Vadla
nullWhat are you using to run your forms and reports, forms web
cartridge, reports web cartridge/ reports web cgi, oracle
application server ....?
Vishnu Vadla (guest) wrote:
: Hello
: i am trying to run a report on the web but it does not ,
: i have a form from where i am calling a report using
: run_product built-in, it does not respond nor give any error
: message, what can be th problem
: the report server has been set.
: please can any one you who have tried these help me out
: Vishnu Vadla
null -
Running reports through the web with SSO enabled
Hey,
I am trying to run several reports through the web by calling a direct url, but for some reason every time I am prompted to sign into Portal because SSO is enabled. What can I do to avoid the sign in page and run the report directly?
ThanksHello,
Add authid=username/password in the URL where username/password is a valid account in the oid
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/cmdline/common/cla_authid.htm
Regards -
hi
how to run report in background and store it in cache
thanks in advance
krishHi,
You need to do this using Information Broadcasting. Details are available here http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f048c590-31a4-2c10-8599-bd01fabb93d4?QuickLink=index&overridelayout=true
Regards,
Suhas -
Getting an error when running reports in the ReportSrvr log
Hi All,
Reports not opening just seem to be running - getting error"ReportServer:Could not find instance for design number."
Plz help- Thanks in AdvanceI found the resolution today. It appears that the service that runs was not started up correctly. As soon as we stopped and started the service, reports was running properly again.
-
Running reports in the background
Headstart 2.1 has the report parameter BACKGROUND. I would
expect that when I enter YES the report runs asynchroneous.
However, reports are always started synchroneous. Is this a bug?
Wim
nullyou can use rfc's model for this na?
pass the parameters to the RFC and through that RFC run the report,
with regards
shanto aloor.
Maybe you are looking for
-
Not able to create New BI Semantic Model Connection
Hi, I am facing some issues in creating BI Semantic Model connection,It says below Error. <contenttemplate> There were errors found while validating the page: Cannot connect to the server or database. Please help me to fix these Error. </contenttempl
-
ODI : create an XML model with UBL technology instead of XSD file
Hello, I have several xsd files which contain UBL (Universal Business Language) and all these files are linked between them. In Oracle Data Integrator, I would like generate a XML model from these files as I use to do with the standard xsd files. Unf
-
Best accessories for uMBP -- Cleaning and Protecting
Hey guys, Just wondering what you guys use to clean your uMBP -- I've been using iKlear with the cloth they give us and I have no problem with that. Is there anything else that you guys use to clean the keys and casing? I only use the iKlear to clean
-
Is there an alternative to adobe flash player
talking to admin would be good, getting an answer would be good,
-
How can I watch TV episodes purchased via Apple TV on my MacBook Air ?
I have been purchasing TV episodes via Apple TV to watch on my TV. How can I watch those purchased items on my MacBook Air ?