Unable to access 2nd HD after installing new DVD drive...stumped
OK have a Mac Pro late 2009, superdrive was acting funny, errors burning DVD's, so I installed a Pioneer DVD I got from Macsales. As soon as I did that, I started getting a grey bar on boot up. Come to find out, the Western DIgital 3tb drive I installed (WD30EXEZ) that I partiioned with Disk Utilities for a Working drive for bootcamp was unreadable, from Lion with Paragon NTFS.. I have two of them, the 1st I set up with a couple OS X partitions and as HFS working disk.Seems to be working fine, I think? My bootcamp (Winblows 7) is on the 640 WD SSD that came with the Mac. Disk Utilities comes up with an error when I verify the NTFS partition but not the drive itself but I a unable to repair it, Winblows 7 sees the drive but can't access it.So I am trying to figure out what went wrong and how to repair the file system. My Mac Pro was purchased Mar 2010 and was nto the primary box, I opted to use my Dell before I gave it to my son.
On to the next problem
I pulled the drive out and hooked it to my sons (Dell) and running testdisk on it via Hirens Boot CD.
Now when I boot the Mac I get the grey bar on the boot which tells me something else is wrong...
any and all help is requested...
thanks
hard to fully understand
Where is Windows 7?
Do you have Paragon latest? never had trouble.
3TB drives with GPT and used as data for Windows? The term "boot camp" means little or too many different things. Drivers, Windows on Mac, but not much else.
I would never repair NTFS with Disk Utility unless Paragon endorses such action.
3TB Greens do seem to give a number of Mac Pro owners grief. Shouldn't but then who knows except WD and Apple may or may not be talking and sharing.
I'd format the drive in Windows, or format the NTFS part. I do use GPT and NTFS for Windows data drives w/ no problem.
WD makes a 640GB SSD? news to me. Can't be. Would check Saturday though. And Apple over-states size/capacity especially when it comes to SSDs. So Apple OEM'd SSD with WDC lable, right? or wrong?
SSDs are an issue unto themselves lately with SATA3 models / firimware.
Boot from Windows.
Pull drives and leave just the one(s) for Windows; or, the one(s) used by OS X - would be a start.
I would only use WD Lifeguard on the drive... whether on your Mac or the Dell.
That is the best this late.
Similar Messages
-
Can I get my bookmarks back after installing new hard drive?
Can I get my bookmarks back after installing new hard drive?
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name'' -
Installed new DVD drive, now iBook will not charge
Hi guys,
I'm a long-time Mac user, and this is the first time I've had any problems so I'm new to this board. I had a bit of a look around, both on this forum and the FAQs, and this appears to be a unique problem.
Basically, for a while my iBook CD drive was spitting out CDs, as per a common problem which I was not able to resolve. Eventually the tray broke and it would not click back into place, and so I was left with an iBook with a CD tray constantly popped out.
I ordered a new DVD drive/burner that claimed it would fit an iBook, and when it arrived I pulled apart my laptop and installed it. Everything appeared to be in order, until I tried to plug in the AC adaptor.
The orange light goes on for about 10-15 seconds, then slowly fades away to nothing. If I unplug and plug it back in straight away, I get no light and no charge. If I wait 15 minutes, the orange light goes back on but once again fades after a short period of time.
My first thought is that perhaps the DVD drive is incompatible/drawing too much power, but I can't figure out how this would affect the charger, and why the problem would persist whether the power is on or off.
Has anyone encountered a problem like this? I don't hold much hope that this will be fixed without expensive surgery, but I'd like to try
iBook G3, PowerPC G5, iPod Mac OS X (10.3.9)Hi Ronda, thanks for the response. I've pulled it apart a couple of times and have put it back together via the instructions I downloaded on the internet both times, and have had the same problem. To be honest, I can't answer that! I'll have to pull it apart this afternoon again to check.
-
I am unable to sync music to iPad iPhone etc. from 27" iMac with anew hard drive install. Wants an old really old apple I'd and PW that hasn't been in use. What to do?
Hello DeedeeB6075,
Thank you for posting in the Apple Support Communities. It sounds like you have some music that you purchased with an older Apple ID that you don't have access to because your new hard drive needs to be authorized. If you know what the Apple ID is, you can go to https://iforgot.apple.com/ to reset your password.
If you cannot remember the Apple ID, you can follow the steps in this article to find your Apple IDs, and then go to https://iforgot.apple.com/ to reset your password.
Apple ID: Finding your Apple ID
http://support.apple.com/kb/HT5625
I hope this helps get you back on track!
Best,
Sheila M. -
Unable to access media card after install of 10 software update
After installing the software 10 update, i'm not able to access the media card from the phone or when plugged in to the laptop. from the phone settings menu, i cant choose to save any file into the media card - its grayed out. Everything was working fine until I installed the update. Is this a common problem? did the update wipe out all the media card contents?
Have you tried removing the media card and re-inserting it?
-
Need help for installing OS after installing new hard drive
I have an imac 27 2010.
The hard drive has failed for the 2nd time. I have installed a new hard drive again. When trying to install the OS, it looks to begin but then tells me it can not be completed.
I had gone the the erase, then partition steps previously.
Any advice?
I do have a time machine copy to restore from if I can get that far as well as the discs handy to use.
Any help would be greatly appreciated.Which OS version install disk do you have? It's not Mavericks since that does not come with a disk.
And you are trying to install Mavericks? If so, are you using the Internet Recovery Option (press Command + Option + R while restarting/rebooting)? I recently read of a case where the user was unable to reinstall the old OS (in that case Snow leopard) and he could not install Mavericks either. He took it to an Apple store and they bypassed the ID/password requirements and reinstalled it for him. -
Playlists Missing After Install New Hard Drive and Upgrade to Win 7
My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH! -
Hp mini 110 boot disk error after installing new hard drive and system recovery
Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.
If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy... -
MacBook Pro won't start after installing new hard drive and me
I changed the hard drive and also upgraded the memory on a mid 2010 13 inch Mac and then used the disks that came with it to reinstall the OS that came on that disk. It worked fine and installed and then the screen came on to transfer from the time machine to the new hard drive so I said yes, and it seems to work fine but then when it finished it asked me for a password. I hadn't put a password on it so that was a surprise. I tried several things but it finally only had the option to restart and when I did that it seemed like it was starting with the apple symbol and the little gear but then it went to a Gray screen with the little gear, and then seems to freeze and then finally goes to the blue screen. The disk to reinstall is still in the drive but I can't seem to get the install to start again. I've tried holding down the c key and starting, I've tried holding down the command plus the c key and nothing....just goes to the blue screen. Any ideas on how to fix this?
ThanksHi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one
I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
appreciated.
PS I have no idea which forum this should go under, so pretty much just picked one randomly.Thank you for the reply. Below is the diagnostic report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XVH7B
Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
Windows Product ID: 55041-011-1350732-86681
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E4300 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>M09 </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
Installation ID: 017002020180881956515246274583104396790522223804443953
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: XVH7B
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 6/6/2014 2:38:03 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 5:30:2014 15:10
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL M09
FACP DELL M09
HPET DELL M09
BOOT DELL M09
MCFG DELL M09
____ DELL M09
ASF! DELL M09
TCPA
SLIC DELL M09
SSDT PmRef CpuPm
scott cohen -
Windows 7 won't load after installing new Hard Drive and Recovery software
HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How to move files after installing new hard drive
I am considering the installation of a new 80 or 100 GB hard drive. I purchased the new iLife 06 program but I do not have enough space to install on my present 60 GB unit. I only have 3 GB available. I've read all the posts involving the possible brands, downloaded the instructions how to swap out the units. My question is how to backup and install my files and applications so I may reinstall onto the new drive. Can I just copy my hard drive volume onto my external Lacie storage unit and then drag the volume back to the new hard drive after booting off my OS disk? Any advice on how to move my apps and files? Do I need to purchase cloning software?
The easiest way is buy an external firewire enclosure and put your new drive in it. Then format your new drive. then use Carbon Copy Cloner to copy your internal drive onto your new drive. Then install your new drive and put your old one in the enclosure. You are now in business with an external backup on your old drive.
-
i recently installed dvd drives on desktop win7. when i open itunes i get the error registry values missing. i have uninstalled and reinstalled many times to no avail. i cannot acess the store, radio, or burn cd's. everything worked fine before the new drives were installed. itunes works fine on laptop win7 also. can anyone help with this issue?
ab (default) reg_sz dvd/cd-rom drives
ab class reg_sz cdrom
ab classDesc reg_sz @%systemroot%\system32\storprop.dll,-17001
ab enumproppages32 reg_sz storprop.dll,dvdproppageprovider
ab iconpath reg_multi_sz @systemroot%\system32\imageres.dll,-30
ab installer32 reg_sz storprop.dll,dvdclassinstaller
ab lower filters reg_multi_sz anydvd
ab noinstallclass reg_sz 1
ab silentinstall reg_sz 1
According to that, you don't seem to have added in an UpperFilters entry for GEARAspiWDM.
Did you not do that (as per the instructions in the document on what to do if the UpperFilters entry is missing)?
Or did you revert the key after attempting a filter edit and still getting the error message? -
2008 macbook pro beeps after installing new hard drive
I install a new hard drive in a 2008 macbook pro and it just beeps. three quick beeps repeatedly. I cloned the new drive from my 2011 macbook pro
Is anybody experience this same problem? please help
thank youYou can't reliably use the clone from one Mac on another Mac of a different vintage. Boot off an external hard drive after installing the operating system from Apple or the original discs on the external hard drive, and use the migration assistent to import data from the internal hard drive. You'll want to make sure the copy on the external hard drive does not excede the internal hard drive capacity by more than 85% before cloning and overwriting its contents.
-
Problems with external/usb after installing new hard drive
After having a new hard drive installed (from Mac 10.5.2 to 10.6.8) I have experienced 2 problems so far:
1. I am getting no response (from anything connected from my usb port) ie. mouse. But plugging in the mouse directly into the mac works fine.
2. After a few minutes, the sound from my production speakers (connected: macbook->usb cord->sound card-> production speakers) starts to skip and then no sound at all, however my soundcard is still working as I see the light is on.
Can anyone let me know how this can be fixed? I never had these problems before getting the new hard drive.try doing a PRAM/NVRAM reset.......
that might sort out your issues.......
good luck.....hope it works for you...
Maybe you are looking for
-
Segment release cancellation error
When I attempted to perform "Cancel Release" on segment type ZE1MARAM in ECC6.0, I encountered the following error message: "Error while resetting release of segment ZE1MARAM" I didn't have the problem when I performed the same action in 4.6c. Our Ba
-
Editable PDF is not editable in this reader
I am opening a editable PDF via Dropbox however when I try to edit the PDF while it is open with this reader it says it is secure and so it does not let me fill it in? Just to be clear it is a PDF that lets me type in text prior to saving or printing
-
Dual displays and MacBook3,1
Hi all! After switching off the external monitor, mac os x continues to switch to dual displays (blue blink). $ uname -a Darwin hostname 9.5.0 Darwin Kernel Version 9.5.0: Wed Sep 3 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386 i386 ***?
-
Hi I have a startup class which needs to access a local entity bean. It used to work in weblogic 6.1, i am currently migrating to 8.1 and i get a Link Exception. I tried to make the startup class as a listener with in the application (EAR), it still
-
Having major OpenVPN difficulties [Self-solved]
EDIT: the problem was caused by this, in my /etc/openvpn/server.conf: log /var/log/openvpn/openvpn.log log-append /var/log/openvpn/openvpn.log ONLY ONE of those two lines is necessary; they are two different ways of logging to openvpn.log. Now that i