Unable to access BCM 2010 DB with Outlook 2010 after running compatibility pack for Outlook 2013

After reading about the Description of Business Contact Manager compatibility pack for Outlook at this link http://support.microsoft.com/kb/2793723 it clearly states "Business Contact Manager for Microsoft Outlook is a compatibility pack that enables
Business Contact Manager for Outlook 2007 and Business Contact Manager for Outlook 2010 to run in Microsoft Outlook 2010 and Microsoft Outlook 2013. Business Contact Manager for Outlook (BCM) also supports using Outlook 2010 and Outlook 2013 in a side-by-side
installation." This link also states "General product fixes, including stability and performance improvements."
So, I was hoping for some stability and performance improvements but desired to continue running from Outlook 2010. After running this downloaded compatibility pack it had little messages other than completed. If I try to run it again it says the database
is already updated. however, now I cannot open the BCM DB in Outlook 2010. when I try to connect to it from Outlook 2010 BCM it only opens a small window with no message, only a yellow exclamation sign. It also won't allow me to restore the
back up.
Can I undo what the compatibility pack program did to my BCM 2010 DB?
Now it won't allow me to restore a DB from two days ago. It gives this error "Access is denied due to a password failure. RESTORE FILELIST is terminating prematurely". I know the password is correct.
Please help, anyone? Now I'm starting to freak out a bit. I am going to reinstall BCM and pray.
I was able to restore the two day old DB by not entering a password. Odd since I know I backed up using a password.

Hi,
Just checking in to see if the information was helpful. Please let us know if you would like further assistance.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

Unable to access ebooks any longer with adobe digital edition

unable to access ebooks any longer with adobe digital edition ..instead i keep getting the error message ''unable to access ebooks any longer with adobe digital edition''

Not seen that message before, but two standard suggestions that may help.
1) ~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
2) ~~~~~~~~~
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.

I am unable to access any of my ebooks in adobe after I had help this morning

I am unable to access any of my ebooks in adobe after I had help this morning

Hi, Thank you so much for the info.... I really do appreciate it. We had the laptop updated by way of a system upgrade with RAM and an additional SSD drive. Once reconfigured all programs were reinstalled but Iphoto is not among them. Iphoto was on the laptop when purchased so we have no additional discs. Before the laptop was updated we backed the photos up to an extrenal hard drive so we have them, but cant access them. Could I purchase Iphoto 8 stll? Would this work? We would also require an external CD drive as we no longer have the disc drive in the laptop (I think the extra new bits took over). You may have noticed I have very limited knowledge on computers so any help dispite how simple it may sound to some would help me greatly. I just want all my photos back .... Thanks inadvance... Hope to hear soon x

After running Office 2011 for 1 year with no problem all programmes stopped working today. I have uninstalled and reinstalled and now can not even put in registration key. Is it Security Update 2015-003 problem?

After running Offcie 2011 for 12 months with no problem, today I can not open any of the programs.
Have followed some advice forums but no resolution.
I have uninstalled and reinstalled and now get the same error when trying to open one of the programs and trying to add activation key.
Updated with Security Update 2015-003 yesterday is this causing the problem?
Running Yosemite 10.10.2

Me too. It has been 3 days since I have no access to iCloud mail. No matter I check it on iCloud.com, Mac, iPhone or iPad, the mail app says I have incorrect password. Specifially, when I check email on my Mac, the message below appears and prompt me to type in the password. I am sure that I've entered the correct password already.
The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “my user name”
Enter your password again or cancel.
Staying away from email for a day is OK, but definietly not for 3 or 4 days. Someone, please tell me what to do. If it has to do with the servers, Apple, PLEASE FIX IT ASAP!!

HT201442 My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 min

My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!

Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
Now if you get an error message then follow the article below to find out what causes the issue:
http://support.apple.com/kb/TS3694
In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7.

HT203808 Updated my iPad to IOS 8.1.2 and now I am unable to access iCloud, iTunes, etc. with my password even though it works on my MacMini. I changed the password thinking it would help, but to no avail. Now what should I do to restore my iPad to acce

After updating my iPad to IOS 8.1.2, I am unable to access the Cloud with my password, even though it worked on my Macmini. I changed the password and it still does not work on the iPad. What can I do to get iPad to recognize my Apple ID/password account?

I would be helpful to know what those "basic steps" you have already tried are, but lacking that information:
Settings app > iTunes & App Stores - sign out of your AppleID
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Sign back into your AppleID (same location as noted above)

Unable to access or view data with no authorization error

Hi Experts,
Appreciate your guys help. I am ID administrator where by some of our user ID unable to view data/ display report for the some of data even the appropriate authorization already assigned to the user. However when we check in the transaction SU53 - authorization checking no error shown!
There is a case whereby user report that his ID (e.g. SAP ID = ABC) unable to access a transaction or infotype data for example HR infotype masterdata,upon checking there is no authorazition error (checked insu53), when copy the ID (ABC) to another new ID (ABC1) with no changes on the roles, the ABC1 ID able to access the said transaction.However, when copy back ABC1 to the ABC (naming conversion only), the ABC ID still unable to access the transaction with no authorization error. the
main problem here is the original ID is not working, but works fine if it is copied to another ID name.
Kindly advice.

Hi Manikya Raju,
Can you explain details?

Unable to access Airport Extreme Disk With Vista

I have a network with a Mac Book Pro, G5, and now a Vista PC all connected to an Airport Extreme. Connected to the AE are a printer and two harddrives. The harddrives are formatted HFS+ Journaled. All three computers have access to the Internet and to the printer. The Vista computer is unable to access the harddrives (most of the time). Prior to the Vista machine I had an XP Pro machine that was able to access the AE without any problems at all. The Vista machine will occasionally be able to access the drives but only for approximately 60 seconds. Access, when it does occur, is typically after a reboot of the AE. Following a reboot, I can map the AE drives to drive letters or simply access them from networking for from IE.
I've tried turning off the Windows firewall as well as the McAfee one and still no solution.
I've tried everything I can think of as well as scanned message boards to no avail. Any suggestions would be appreciated.

am having similar problems with USB drive connected to airport extreme. I tried with a usb key and it can only be seen by the airport base station agent and computers on the network if it is formatted using FAT32 file system. if I use any other file system to format the usb key, it cannot be seen. I have some external hard drives that windows will not allow me to to format using fat32. they are NTFS formatted and are not usable.
You might try formatting your drives in FAT32 if you can, after backing up all the files you have on the drive. then see if it works.

Outlook 2010/2007 with Exchange 2010 - show email address in field To: instead name

Hi,
I´ve SBS 2011. Some users have more email aliases. I want to see in Outlook email adress/alias in field To: <- no user Name and Surname. I know, that I can open every message and go to Options and see full header, where is email adress, but I want
to see it on message preview in Outlook window (or Name Surname ([email protected]))
Thank you very much for your responses.

I think this is not what he was looking for. The link you provided is for showing the senders smtp address and not the recipients. as i understand it, hes looking for the same that i do.
user has multiple smtp addresses and user wants to be able to see to which of his own addresses the mails has been sent.
im looking for that solution to show recipients smtp address in the To:-Field when showing the email
as i unterstand it, there could not be a registry-value for outlook because exchange isnt using the smtp address internaly to deliver the email.
the only "Simple" Solution/Workaround i found is to use a distribution group with the smtp address you want to see and only add the specific user. then the user is able to see the Name of the Distribution Group instead of his own name so
hes able to differ.
thanks

Problems with Blog Comments after running Google Analytics Automator

I upgraded to IWeb 09 today and was hoping that there would be not too many compatibility issues. Well, here is one.
I noticed that the comment function on my blog page kept disappearing after I published the website to MobileMe. After some hours of trial and error I found out that the comment function is there right after publishing but disappears straight after running the Google Analytics Automator on the Idisk website folder.
I don't think I had this problem with IWeb 08 (I only used it briefly), so that might be a compatibility issue with IWeb 09.
Anybody else had this problem? Any suggestions?

After some hours of trial and error I found out that the comment function is there right after publishing but disappears straight after running the Google Analytics Automator on the Idisk website folder.
this is a known problem since from iweb1, any time you post edit your pages (with google analytics automator or what not) you potentially cripple MMe server side functions.
search iweb1 and iweb2 forum for more details.

Unable to use Adobe 9 Pro with Office 2010

The year is 2012 and Adobe still has not resolved issues with beinga able to use the features I paid them for. Specifically the ability to retain metadata, hyperlink the TOC and maintain other links when converting an Office 2010 Profesional document to Adobe. When will Adobe make good? I'm in the software industry and I'm not buying that it's taking them TWO years to figure out how to support 64-bit. Give me a break Adobe. Meanwhile, if anyone has some ideas on how I convert my 2010 MS word documents to Adobe and maintain my links, I'd really appreciate your help.

Microsoft Office 2010 is compatible with Acrobat X (with 64-bit support included from version 10.1). Acrobat 9 is now a legacy product, so there will be no major additions to features.
See http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

Unable to access Web based emails with latest version of Firefox

Having downloaded the latest version of Firefox, which I am very impressed with, I am unable to open my web based emails, I get the following message "You have undefined new mails in your inbox".
I have to use Internet exploree to view my emails.
Any way to change this.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Unable to access server files shares with Active Directory Users

Quick breakdown of my issue.
I have setup a Yosemite file server running the latest version of Yosemite and Server.
File sharing in Server.app is enabled and shares have been created
The server is bound to my company's Active Directory and you can directly login to the computer via AD credentials.
The big issue is this, unless the user has directly walked up to my server and logged into it at least once, they cannot authenticate to the file shares via their AD credentials.
For example: Administrator (me) I can login and access all file shares without issue.
Jane Smith (SMITH) who has actually walked up to my server and logged in via her AD credentials, can also access all file shares. (That she has access to)
John Doe (JDOE) who has not logged into the server in anyway, cannot authenticate to the server file shares at all (even though I have granted him permission) He just gets an "Access Denied" message.
I have gone into Directory Utility and changed the search order to give AD priority and this still doesn't resolve the problem.
We have unbound the server from AD and added in back again and still not able to resolve.
If you open Server.app and go to add someone from AD to a file share, it finds the AD user quickly and everything looks right. but still unable to authenticate to the server if they haven't directly logged into it before?
All of the documentation and google articles I have found say my server is setup correctly, any help would be greatly appreciate it!
Thanks in advance!

I figured this out. In Mountain Lion Server, it doesn't matter if you give the user rights to a shared file or folder, if the user doesn't have access the File Sharing service, they can't get it. I had to find the specific users in the Server app under the AD in the Users tab, and give them rights to the File Sharing service. I think you can do this for a whole AD group as well, but I haven't tried.

I currently use iCloud on a MacBook Pro. I opened my iBook G4 that I haven't used in several years and am unable to access my MobileMe account with many stored emails that I would like to transfer to the MacBook Pro. I have tried all of the passwords.

I currently use iCloud on a MacBook Pro. I opened my iBook G4 that hasn't been used in years. I have many email messages that i would like to transfer to the MacBook Pro, but every password I use to access MobileMe is not accepted. Any suggestions on retrieving or transferring the emails?

MobileMe was discontinued around 2 years ago. Anything on the MMe servers are long gone. The MMe passwords are uselsess because MMe is no more.
Unless you created an iCloud account back before MMe was taken off line you won't be able to recover any emails.
OT

Ever since I updated my iPhone 5s I am unable to access my account information with US cellular

Has anybody else had this problem since doing an update on their iPhone?

I actually went to the uscellular agent, who called for me. She was told that it is an Apple problem and someone will get back to us. God only knows how long that will take. She told me to give them two weeks and if I don't have a resolution, to come back to the store.

Unable to access BCM 2010 DB with Outlook 2010 after running compatibility pack for Outlook 2013

Similar Messages

Maybe you are looking for