Unable to access BIOS for Compaq CQ35

Hi,
I have a Compaq Presario CQ35-213TX.
The original hard disk with Windows 7 crashed and I manage to change it and installed Win8.
However, I cannot access the BIOS.
Is the BIOS residing in a hidden partition on the original hard disk which was gone after I change it?
Hope you can teach me how to restore the BIOS.
Thanks.
Derrick
This question was solved.
View Solution.

Hi Derrick,
Try the following.
Power down the notebook by holding down the Shift key and clicking Shutdown - this will temporarily prevent a hybrid boot.
When the notebook has shutdown, tap away at the esc key as soon as you press the power button to launch the Start-up Menu and then select the Bios Menu ( f10 ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Lenovo G50-30 Unable to access BIOS settings after Windows recovery

Hi
I recently 'downgraded' a recently purchased Lenovo G50-30 with preinstalled Windows 8.1 to Windows 7 using a UEFI USB install on a GPT partition. I also updated the BIOS from A7CN40WW to the latest A7CN43WW and all was working fine. However, after performing a necessary restore of an system image created using the Windows 7 backup and restore tool, I am suddenly unable to access the BIOS settings, either with the novo button (I do get the menu to select BIOS) or with Fn +F2. All that happens is that I receive a blank screen with a static cursor in the upper left corner. I can however still access the boot menu Fn +F12. This is a particular pain as I obviousl can't select USB 3.0 in BIOS.
Any help here would be greatly appreciated.

OK, I managed to clear CMOS by disassembling and desoldering a leg off the the RTC battery but to no avail. The problem seems to be that BIOS a7cn43ww itself has somehow been corupted. In theory this should be able to be resolved by a reflash. The trouble here is there seems to be no way to reflash with a current or previous BIOS version, so I'll have to either wait for a newer version or someone may know better.
C'mon Lenovo support this simply isn't good enough. It's a brand new laptop and I'm considering returning it for a refund.

Unable to access BIOS Windows XP Professional

Hello everyone,
I installed Windows XP Professional on my MacBook Pro. When I start up from the Windows Partition, it brings me to the startup page of windows xp (where I am supposed to start BIOS) and then to the setup (not the setup with the blue background, I have done that already). After about 1 minute of installing, it tells me "Fatal Error". The date and time are incorrect. I have to go into the BIOS and correct it. The problem is that I don't know how to get access to the BIOS!! Does anyone know how I can get to it?
Thanks,
iloveisrael.

One of the few disappointments of my switch to Mac: no BIOS for some really wonderful OS cloning software I own. There is a fascinating tool-project going on for EFI though... http://refit.sourceforge.net/
Further: http://www.intel.com/technology/efi/
http://en.wikipedia.org/wiki/ExtensibleFirmwareInterface
http://www.uefi.org/specs/
(All way over my head, BTW)
Cheers - NAS

TS4526 Gen 1 Apple TV Unable to access iTunes for movies and TV shows

My gen 1 Apple TV suddenly cannot access movies or TV shows from iTunes store or my MAC. Stopped synching video. I can access iTunes store and make purchases but then unable to access the purchased item the next day.

Welcome to the Apple community.
What are you doing when you get this message, are you trying to set up homesharing or trying to access your library.

U410 Touch unable to access BIOS

Hello All,
I purchased a new U410 touch and i am very happy with it.
I attempted to install the Windows 8.1 preview then restored to a backup since i didn't do my research and realized that the RC was almost released...
I changed the bios options to be legacy with uefi first.
On completion of the restore I noticed that the bios is not accessible...
I tried different access methods... f2, shift_ f2, one key recovery and selecting "uefi firmware settings" in troubleshooting for windows 8... all to no avail... then tried a factory reset and the same problem.
Is there any chance that there is a bios update drifting around the internet to reflash the bios?
My next step is to remove the hard drive and ssd to see if there is something wrong in the file system somewhere on the hidden partitions... then to remove the CMOS battery to hopefully reset the BIOS... although i did manage to restore the system to my backup, so i do have a fully working system at the moment... just missing the BIOS settings....
Any help would be greatly appreciated.
added below on 03-sep-2013 22:16 UTC:
I removed the hard disk and ssd and booted up again... still no bios settings...
Anyone know if the bios is compatible with any other machines?
Again... any help appreciated...

hi danielsena,
Welcome to the Forums.
Your issue might be similar to this thread.
It's possible that the UEFI firmware in the BIOS got corrupted for some reason and one way to solve it is to reflash the BIOS (see this article - this is for another model but same aspects apply). For now, yYou may need to bring it in to reflash the BIOS as there's no available download yet on the lenovo website.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Unable to access gallery for changing display picture.

I am not able to change my display picture to my choice because the only 3 tabs are (default, recent and camera). I do not have access to my gallery to change my dp. Is there any solution to this problem?
I have been searching online for solutions, but am unable to find any. Kindly help!
Thank you

Hello boimoet and welcome to the BlackBerry Support Community Forums.
Thanks for your question regarding the display photo in BBM.
Currently the photo cannot be zoomed out for a full display as your profile photo. Only the area displayed in the crop window can be selected for display.
Hope this helps to clarify.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Unable to flash bios for X61 - version 2.22 - 7nuj22us

Neither the .ISO or .EXE version is working.
I don't have the Ultrabase, so I tried creating a bootable USB device with the flash files on it.
It boots up into Win98-DOS fine, but when I try to run UPDTFLSH.EXE, it says something about the image file not being found.
So I installed WindowsXP SP3 (Integrated) onto the X61 itself, and tried the 7nuj22us.EXE which gave the same error.
I AM UNABLE TO FIND A VERSION OF WINDOWXP without the SP3- it's too long ago.
Would be great if anyone can offer suggestions.
Thanks.
Solved!
Go to Solution.

Nevermind, I was trying to flash with the wrong BIOS.
Correct one for tablets are at:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-68009
X61 and X61 Tablets are different patch files.

Unable to access WLS_FORMS for Work and asset management via weblogic

**Hi All,**
**I am in the process of installing Oracle WAM 10.3.4 on Windows x86 64bit, Oracle 11.2.0.1 database Java 1.6.0_23.**
**I have already installed everything and have started the WLS_FORMS server from weblogic console. However when I am trying to access the forms website - I am just getting 404.**
**Weblogic installed in : C:\SPL\Oracle\middleware\wlserver1034**
**Instance in : C:\SPL\Oracle\middleware\wam_inst1**
**server in : C:\SPL\Oracle\middleware\CCHDEV1**
**here is my config.properties for WAM:**
root_path=C:/SPL/WAMCCH/synergencchdev1/sia/
app_server=http://ldelara-ph.splwg.com:9001/cchdev1/
help_default_page=webhelp/wwhelp/wwhimpl/js/html/wwhelp.htm?context=Overview&topic=uo_whatsnew
mail_server=mail.server.com
asp_url=http://ldelara-ph.splwg.com:8001/
init_integration_table=true
chart_xml_path=C:/SPL/WAMCCH/synergencchdev1/sia/charts/data
max_chart_records=20000
forms_servlet=frmservlet?config=wam
forms_server=http://ldelara-ph.splwg.com:9001/forms/
forms_report_service_name=RptSvr_LDELARA-PH_wam_inst1
forms_report_server_url=http://ldelara-ph.splwg.com:8888/reports/rwservlet
forms_tnsname=cchdev1
report_cgicmd_key=report_cgicmd_key1
debug_session_level=INFO
debug_session_filter=synergen
debug_session_method_filter=
application=synergen
datasource=synergen
default_locale=en-us
charset_to_use=UTF-8
file_prefix=documents
log_requests=false
move_requests_to_history=false
home_page_url=Home?tgt=Main
logon_page_url=Logon?tgt=Main
logon_error_url=Logon?tgt=Failure
logoff_page_url=Logon?tgt=Main
ssoMode=false
event_queue_module=EventQueue
event_queue_page=Results
default_username=synergenguest
queue_retries=1
auto_logon_expire=30
max_user_windows=3
db_proxy_session_helper_class=synergen.db.OracleAsDbProxySessionHelper
sia_integration_url=http://ldelara-ph.splwg.com:9001/cchdev1/synergen/
repair_revoked_metadata_age_in_days = 30
WLS_FORMS.out
the JEE version.>
*************** Starting SIA Application Server ***************
Configuring log4j...
configuration file to be used = C:\SPL\WAMCCH\synergen\CCHDEVwaminst\sia\WEB-INF\classes\wam-log4j.properties
Finished configuring log4j...
************* Started loading config properties *************
Listing config properties
forms_report_server_url=http://ldelara-ph.splwg.com:9001/reports/rwservlet
forms_tnsname=WLS_FORMS
asp_url=http://ldelara-ph.splwg.com:9001/
log_requests=false
forms_servlet=frmservlet?config=wam
default_locale=en-us
root_path=C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/
logon_error_url=Logon?tgt=Failure
file_prefix=documents
queue_retries=1
help_default_page=webhelp/wwhelp/wwhimpl/js/html/wwhelp.htm?context=Overview&topic=uo_whatsnew
debug_session_method_filter=
db_proxy_session_helper_class=synergen.db.OracleAsDbProxySessionHelper
ssoMode=false
home_page_url=Home?tgt=Main
auto_logon_expire=30
report_cgicmd_key=report_cgicmd_key1
forms_server=http://ldelara-ph.splwg.com:9001/forms/
init_integration_table=true
logon_page_url=Logon?tgt=Main
app_server=http://ldelara-ph.splwg.com:9001/wam_inst1/
repair_revoked_metadata_age_in_days=30
default_username=synergenguest
forms_report_service_name=RptSvr_LDELARA-PH_wam_inst1
application=synergen
event_queue_page=Results
charset_to_use=UTF-8
event_queue_module=EventQueue
move_requests_to_history=false
debug_session_filter=synergen
datasource=synergen
logoff_page_url=Logon?tgt=Main
mail_server=mail.server.com
sia_integration_url=http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
debug_session_level=INFO
chart_xml_path=C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/charts/data/
max_user_windows=3
max_chart_records=20000
Setting derived paths
xmlPath = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/xml/
logPath = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/logs/
debugPath = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/debug/
Chart Directory = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/charts/
Documents Path = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/documents/
Temporary Documents Path = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/tempdocs/
Loading converted properties
************* Completed loading config properties *************
Database Connection Factory Settings
Accessing MetaData from Database
Database jdbc:oracle:thin:@ldelara-ph.splwg.com:1521:CCHDEV
JDBC Driver Oracle JDBC driver/11.2.0.2.0
Database Name/Version: Oracle/Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Installation Parameters
12.06.12.15:47:54.661 root
[INFO] SQL Executed: select key_name, key_value from SA_INSTALLATION_PARAMETERS where key_name in ('PHONE_NUMBER_FORMAT', 'SCHEDULING TOTAL EST HRS DISP', 'ENABLE PASSWORD RESET')
12.06.12.15:47:55.124 root
Starting DatePrefereneces.initDatePreferences
12.06.12.15:47:55.125 root
[INFO] SQL Executed: select username, java_long_date_mask, oracle_long_date_mask, long_date_delimiter, java_short_date_mask, oracle_short_date_mask, short_date_delimiter, java_time_mask, oracle_time_mask, time_delimiter, skin, show_component_desc, short_date_mask_no from sv_preference where username in ('DEFAULT', 'DEFAULT')
12.06.12.15:47:55.283 root
Created session 13547800752830 at Thu Dec 06 15:47:55 SGT 2012
12.06.12.15:47:55.283 root
Session 13547800752830 is currently using username SYNERGENGUEST
Enable password reset parameter is false
12.06.12.15:47:55.371 db.DatabaseConnect
[INFO] SQL Executed:select key_value from sa_installation_parameters where key_name = 'CHART THUMBNAIL GENERATION'
Scheduling Total/Estimate Display is ON
12.06.12.15:47:55.373 db.DatabaseConnect
[INFO] SQL Executed:select key_name from sa_installation_parameters where key_value in ('SERVICE PACK', 'SERVICE PACK1', 'MAJOR RELEASE')and last_update_date in (select max(last_update_date) from sa_installation_parameters where key_value in ('SERVICE PACK', 'SERVICE PACK1', 'MAJOR RELEASE'))
Product Version from Installation Parameters is 1.9.0.3.0
SA_INTERNET_INTEGRATION initialization
Deleting integration records for http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
12.06.12.15:47:55.374 db.DatabaseConnect
[INFO] SQL Executed:delete from sa_internet_integration where sia_url='http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/'
SIA URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
Forms Server URL = http://ldelara-ph.splwg.com:9001/forms/
Home Page URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/Home?tgt=Main
Event Queue Administration URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/EventQueue?tgt=Results
Event Queue Servlet URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/EventServlet
SIA Application Version = v1.9.0.3.201106221519
SIA URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
Timestamp = Thu Dec 06 15:47:55 SGT 2012
Deleting all integration records
12.06.12.15:47:55.382 db.DatabaseConnect
[INFO] SQL Executed:delete from sa_internet_integration
12.06.12.15:47:55.384 db.DatabaseConnect
[INFO] SQL Executed:insert into sa_internet_integration (home_page_url, event_queue_admin_url, process_queue_url, sia_version, sia_url, forms_server_url, timestamp) select ?, ?, ?, ?, ?, ?, ? from dual where 0 = (select count(*) from sa_internet_integration where forms_server_url = ? and sia_url = ?)
Completed initialization of integration table for http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
12.06.12.15:47:55.396 root
Created session 13547800753961 at Thu Dec 06 15:47:55 SGT 2012
12.06.12.15:47:55.396 root
Session 13547800753961 is currently using username SYNERGENGUEST
12.06.12.15:47:55.397 db.DatabaseConnect
[INFO] SQL Executed:select sia_url from sa_internet_integration where timestamp in (select max(timestamp) from sa_internet_integration)
12.06.12.15:47:55.398 net.EventManager
Current server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
12.06.12.15:47:55.398 net.EventManager
Primary server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
XT_EVENT_QUEUE Cleanup
12.06.12.15:47:55.399 db.DatabaseConnect
[INFO] SQL Executed:select status, status_date, status_message from xt_event_queue where status in ('processing')
Initializing ApplicationMapData
12.06.12.15:47:55.476 db.DatabaseConnect
[INFO] SQL Executed:SELECT lower(r.primekey_name_1), lower(r.primekey_name_2), lower(r.primekey_name_3), lower(r.primekey_name_4), r.architecture_ind, r.form_name, r.sia_module, r.form_function FROM SA_FORM_NAMES r order by r.form_name
Loading Named Query Cache...
12.06.12.15:47:55.578 util.AbstractGeneralCache
Initializing the NamedQueryInfoCache.
Begin loading Table Metadata Cache...
12.06.12.15:47:55.585 db.TableMetaDataCache
Initializing the TableMetaData cache.
Loaded metadata for 316 tables/views in 2156 milliseconds.
Initializing Field MetaData Cache
12.06.12.15:47:57.745 util.AbstractGeneralCache
Initializing the FieldMetaDataCache cache.
Loading Labels/Words Cache
Strict English translations: false
12.06.12.15:47:57.753 db.DatabaseConnect
[INFO] SQL Executed:select field_name, locale_code, is_db_field, label, short_label, extended_label, hint from xt_application_labels
Initializing UDF Attributes Cache
12.06.12.15:47:57.758 util.AbstractGeneralCache
Initializing the UdfAttributesCache cache.
Begin loading Group Element Metadata Cache...
12.06.12.15:47:57.766 util.AbstractGeneralCache
Initializing the MetaDataGroupElementCache.
12.06.12.15:47:57.942 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the XT_RESP_PAGE_RESTRICTIONS column name RESTRICT_INSERT.
12.06.12.15:47:57.942 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the XT_RESP_PAGE_RESTRICTIONS column name RESTRICT_UPDATE.
12.06.12.15:47:57.942 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the XT_RESP_PAGE_RESTRICTIONS column name RESTRICT_DELETE.
12.06.12.15:47:58.515 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the SA_USER_PROFILE column name CUSTOMER_ID.
12.06.12.15:47:58.743 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the SA_SERVICE_REQUEST column name ESTIMATE_TOTAL.
Loaded metadata for 258 metadata groups in 1071 milliseconds.
*************** Completed SIA Application Startup ***************
12.06.12.15:47:58.848 root
Event Servlet checking primary SIA server before attempting event queue processing
12.06.12.15:47:58.848 root
Created session 13547800788482 at Thu Dec 06 15:47:58 SGT 2012
12.06.12.15:47:58.848 root
Session 13547800788482 is currently using username SYNERGENGUEST
12.06.12.15:47:58.848 db.DatabaseConnect
[INFO] SQL Executed:select sia_url from sa_internet_integration where timestamp in (select max(timestamp) from sa_internet_integration)
12.06.12.15:47:58.849 net.EventManager
Current server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
12.06.12.15:47:58.849 net.EventManager
Primary server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
12.06.12.15:47:58.850 root
Processing 'pending' event queue records
12.06.12.15:47:58.850 root
Created session 13547800788503 at Thu Dec 06 15:47:58 SGT 2012
12.06.12.15:47:58.851 root
Session 13547800788503 is currently using username SYNERGENGUEST
12.06.12.15:47:58.852 db.DatabaseConnect
[INFO] SQL Executed:select event_seq_no, event_type, event_title, status, status_date, status_message, event_interval, next_event_date, originator, recipients_to, recipients_cc, recipients_bcc, message_subject, content_type, request_xml, content, content_url, last_retry, read_receipt_ind, importance_ind, attachment_filename, last_update_date, last_update_user, created_date, created_by from xt_event_queue where status in ('pending')
Starting FileClerk...
FileClerk complete. 0 files deleted in 56.0 milliseconds.
<12 6, 12 3:48:01 PM SGT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<12 6, 12 3:48:01 PM SGT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<12 6, 12 3:48:01 PM SGT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of cluster_forms.>
<12 6, 12 3:48:31 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<12 6, 12 3:48:31 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<12 6, 12 3:48:31 PM SGT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<12 6, 12 3:48:31 PM SGT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.186.252.165:9001 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<12 6, 12 3:48:31 PM SGT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "WLS_FORMS" for domain "ClassicDomain" running in Production Mode>
<12 6, 12 3:48:32 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<12 6, 12 3:48:32 PM SGT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Any suggestions how I can fix this? I am lost as there are no errors on WLS_FORMS.out

Hi Kal,
thanks for your reply, but I apologize for the Newbie question ( fairly new at weblogic) but from which tab can I find/change initial connect value?
thanks,
Lui

I have been unable to access mail for 3 days.

I can log into iCloud and use calendar, Find my iPhone and Contacts but not mail. All other mail accounts are working fine in Apple Mail.
This is the message I am getting when I try to get my mail.
The iCloud IMAP server “p02-imap.mail.me.com” rejected the password for user “[email protected]”
I deleted and reinstalled iCloud on Apple Mail, emptied Safari cache, restarted the iMac. It is still not working.
iMac on 10.7.3, iPad 2 on 5.0.1
Thanks,
Jan

Does the iPod connect to other networks?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Unable to Access BIOS

I have a Pavillion Elite e9280f desktop. When I start the computer, I'm prompted to press F10 to enter the BIOS settings. However, pressing F10 has no effect - I've pressed it once, I've pressed it repeatedly, I've held the F10 key down - in all cases, the boot process continues after a few seconds and I get "Starting Windows". I'm wondering if this is related to the HP USB keyboard that came with the PC, but mostly I'm wondering how I can access the BIOS settings if pressing the F10 does not work!!
This question was solved.
View Solution.

I finally solved the problem of not being able to access the BIOS. First, I realized that my keyboard was plugged into an external USB Hub instead of directly into a USB port on the computer. Moving the keyboard to a USB port on the computer allowed F10 to be recognized and the PC showed the "Entering Setup" message, however, the PC just hung at that point.
I then unplugged all non-essential items from the PC and restarted. This time F10 actually got me into the BIOS settings. By process of elimination, I determined it was the external USB hub that was hanging the PC when it was attempting to enter Setup. I have no idea why that should be a low level issue, but hopefully this post will save someone else many frustrating moments trying to access the BIOS.

How do I access bios for my Satellite L45 - S4687?

I can't seem find info on how to access my bios anywhere. If someone can help I'd greatly appreciate it!

Satellite L45-S4687
Maybe this helps.
BIOS Setup / BIOS settings -- access instructions
-Jerry

Unable to access help for e-business suite

Hi ,
We are on R12.0.4. We are getting this error while accessing help .
"Help target US/AP/@APXSSFSO_FINANCIALS_SYSTEM_PARAMETER could not be found."
Any help will be appreciated.
Best regards,
brinda

Hi brinda;
We are on R12.0.4. We are getting this error while accessing help .What is OS? When u are getting this error,i mean accessing where? login page-forms etc.
"Help target US/AP/@APXSSFSO_FINANCIALS_SYSTEM_PARAMETER could not be found."Is this compliate error? It was working before,if yes what u have been changed?
Please look at Note:R11: FRM-40735 WHEN ENTERING FINANCIAL OPTIONS IN APXSSFSO FORM - RELEASE 11 [ID 1057440.6] and see helpful
Regard
Helios

Unable to access URL for a webservice in weblogic integration server

Hi
I have an application in which i deployed a webservice , however when i am trying to access it , it throws the exception weblogic.webservice.tools.wsdlp.WSDLParseException . "failed to retrieve WSDL from URL"

Hi
The error you typed is not enough. Can you please give us more information about error in log. (wls and application log)

Accessing BIOS on DV6-6135DX to enable boot from CD

I am unable to access bios by hitting F2/F9/F10/F11 or esc during startup on my new DV6-6135DX notebook. What key do I strike during startup to provide a menu that allows me to switch to booting from the CD/DVD?

Hold esc, and it will show you a list of options. I believe its F9 but I am not sure.

Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.

Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.
Setup includes CUCM9.0, Unity Connection 9.0, Presence 9.0....
steps taken to configure(and results acheived)
1-users created locally on CUCM and Enabled for IM and Presence.
2-able to login to clients (CUPS7/8.6 and Jabber) but getting error Voicemail Error. The server has rejected the provided credentials. [1903]
in order to verify there is nothing wrong with the credentials...i checked on unity and i am sure it's the PIN(12345) i need to use .
Can Anyone help me out here...Thanks in advance.

It's not looking for your PIN - that is only used over DTMF-based interactions - it's looking for your CUC password. If the mailbox is synced from LDAP and you have LDAP Auth enabled on CUC, then this would be your AD password. If it's synced over AXL, not synced at all, or LDAP synced but without Auth, then there will be an alphanumeric password field on the mailbox under Edit > Change Passwords.
Please remember to rate helpful responses and identify helpful or correct answers.

Unable to access BIOS for Compaq CQ35

Similar Messages

Maybe you are looking for