Unable to access Calender using Groups (as Manager) using PC

I own a mac, but I'm doing the following on a friends PC. (That might be important to know or not).
I went to my mac.com account and created a group. First time. When I was in my group, i clicked on the calendar area thinking it would open up and I could begin to enter data into the calendar. But, it didn't open.
Instructions at mac.com help section state to click on a link titled "Change Calendar" located below the Calendar. But when I do that, the link changes to "learn how to create a custom calendar" link. Contrary to what the help page said, there was no option to create a custom calender. When I clicked on the "learn how to create a custom calendar" I was directed to the Group's iCal help page located at
http://www.mac.com/1/ical.html
According to that help page, I'm suppose to to click on the link below the calendar "change calender". (oh oh, I'm going in circles).
Does anyone know how I can access the calendar in the Groups?
  Mac OS X (10.4)  
  Mac OS X (10.4)  
  Mac OS X (10.4)  
  Mac OS X (10.4)  

Welcome to Apple Discussions!
From the Groups FAQ:
Q: How do I publish a calendar for a group?
A: You create and publish the calendar using iCal. You can then use either the Edit Group page or the group page to select the calendar from your list of published calendars and make it available to the group via the group page.
Because you can only create a calendar in iCal, which only runs on a Mac, you'll need to do that part from a Mac.

Similar Messages

  • Unable to access the data from Data Management Gateway: Query timeout expired

    Hi,
    Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
    1. The gateway is in running status.
    2. Data source is also in ready status and test connection worked fine too.
    3. Below is the error in System Health -
    Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.        
    Error code: 4025
    4. Below is the error in Event Viewer.
    Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
    5. This is the correlational id for latest refresh failure
    is
    f9030dd8-af4c-4225-8674-50ce85a770d0
    6.
    Refresh History error is –
    Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
    managed IDataReader interface was being used: Query timeout expired. 
    Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
    Thanks,
    Richa

    Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
    Thanks.

  • Unable to access website using home network but able to access using school network.

    Hi, I'm currently on a MacBook Pro running OS X Mountain Lion and Safari v6.0.4.
    As per the title, I'm unable to access particular websites, namely abduzeedo.com and fromupnorth.com, using my home network but when I try to access using my school network, I can access it freely.
    The error message I get is: "Safari can't open the page [website] because the server where this page is located isn't responding"
    I've tried clearing my cache, resetting my IP, deleting the library file (or whatever it was that some people suggested in forums) but it still doesn't work ):
    Any suggestions?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Unable to access Internet using a Mobile Network

    Hello friends
    I recently updated my SE Xperia mini pro 17i (2011 model) to ICS, initially there were some issues and I had to re-update it to finally get authentic interface of ICS. Even after the successful update I am unable to use the mobile network to access Internet, the only way  is to use a Wifi instead. Can somebody please help me out with this issue?
    Karan

    The first thing I would advise doing is contacting your current network provider and have them send you through the relevant internet settings.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Unable to access sysvol using path \\domain.local\sysvol

    Hi,
    We found that our newly configured workstations were unable to read/apply GPOs. Upon checking, we are able to access the path \\domain.local. However, when trying to open sysvol folder (or any other shared folder on the domain controller), we receive the
    following error:
    We cannot also access the folders when using domain netbios name. Strangely enough, when using IP address or DC name, we can successfully map the sysvol folder.
    Have also tried running DCdiag and the test
    NCSecDesc fails with error:
    Hope anyone can shed some light on what went wrong.
    Thank you.

    Hi,
    Based on your description, please make sure that TCP/IP NetBIOS Helper, Netlogon, and the Remote Procedure Call (RPC) services are started and set to Automatic.
    If the issue persists, we can also try disjoining and rejoining the workstation.
    The following thread focused on the similar issue and can be referred as reference.
    Cannot access
    \\domain\sysvol
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c58600d7-5c7b-4cbb-9da4-4c98e3fa2997/cannot-access-domainsysvol?forum=windowsserver2008r2general
    Best regards,
    Frank Shen

  • Unable to access files using search title and link

    Once a list of search results appears, I am unable to retrieve the referenced document using either the hyperlink title or "link" hyperlink. I can only access the document using cache. Does crawler configuration need to be modified?

    file://localhost/dbadmin
    And here is the error message that appears when the title hyperlink is selected:
    java.io.IOException: \dbadmin\projects\NMAX_Refresh\Requests\NMAT_20050329\mtch_users_synonym.sql is not an acceptable relative path when user.dir is C:\ORACLE\PRODUCT\10.1.6\SES1\ at oracle.aurora.java.io.OracleIO.transformRelative(OracleIO.java:65) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.(FileInputStream.java:103) at oracle.search.GetPage.readFileURL(GetPage.java:958)

  • Unable to access Oracle using ODP

    Hello,
    I recently installed ODP and am trying to use it to access my Oracle 10g database from a C# Application built with Visual Studio 2005. (I can access the database via OLE with no problem). I've added the proper references and the program compiles fine. The following code failes on the call to ExecuteReader, with the message that the connection must be open. However, the call to dbConn.Open(); is successful, and as far as I can tell the connection is open (I can successfully read the database version number). Any ideas?
    OracleConnection dbConn = new OracleConnection(
         "Data Source=myDBAsInTNSNamesFile;" +
         "User Id=myuserid;" +
         "Password=mypassword;");
    try
    dbConn.Open(); //OK!
    catch (Exception)
    return false; //Never gets here
    OracleCommand cmd = dbConn.CreateCommand();
    cmd.CommandText = "Select name from people";
    OracleDataReader reader = cmd.ExecuteReader(); //FAILS! Claims connection is not open
    //etc.

    I'm not using that version of ODP.NET so I'm not altogether certain but your problem seems similar to the one described in this post...
    Oracle Technology Network: Forums
    After upgrading to ODP.NET 10.1.0.400 existings Apps fail.
    ..except your post implies that you hadn't previously tried an earlier version, so I don't think it's a problem with the assembly reference version. Still, are you sure that you've got the path references correctly configured? Did you try rebooting after the installation and setup? Also, just curious...are you encountering this problem with both win forms and asp.net applications?

  • Unable to access URL using HttpURLConnection

    Hi,
    I am using HttpURLCOnnection class to post a data to a url(which is a web service). The webservice accepts data as text/xml.
    Following is the code snippet i used:
    URL url = new URL("http://xxx.xxx.xx.xx:8080/SampleWebService.svc");
    HttpURLConnection conn =(HttpURLConnection) url.openConnection();
    conn.setDoOutput(true);
    conn.setRequestMethod("POST");
    conn.setRequestProperty("Content-Type","text/xml");
    String urlStr="param1="+URLEncoder.encode(value1)+"&param2="+URLEncoder.encode(value2)
    OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
    wr.write(urlStr);
    wr.flush();
    InputStream in2 = conn.getInputStream();
    in2.close();
    wr.close();
    But when i execute the code, I am getting following error at the line(InputStream in2 = conn.getInputStream();)
    java.io.IOException: Server returned HTTP response code: 400 for URL
    Can someone please suggest a solution. Am i missing something here?
    Thanks in advance

    This may not be the cause of the problem, however I will point out that the Content-Type you are setting (text/xml) is not the content type you are sending (key=value&key=value...).
    If the webservice only accepts text/xml, then this is probably the cause of your problem.
    Another thing you could try is removing the line that sets the content type.
    Here are the request properties in some (hacky) code that I have used for sending POST requests:
                   conn.setDoOutput(true);
                   conn.setRequestProperty("Host", url.getHost());
                   conn.setRequestProperty("Referer", referer);
                   conn.setRequestProperty("Cache-Control", "max-age=0");
                   conn.setRequestProperty("User-Agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727)");
                   conn.setRequestProperty("Cookie", cookies);Edited by: 842408 on Mar 7, 2011 10:14 AM
    Edited by: 842408 on Mar 7, 2011 10:14 AM

  • Unable to access files using FilePermission class .

    Hi frineds !!!
    I m new to java networking..plz help in finding the solution of my problem*..Its urgent !!*
    FilePermission perm=new FilePermission("D:/contacts","read");
    AccessController.checkPermission(perm);
    and it is giving an error :
    Exception in thread "main" java.security.AccessControlException: access denied (java.io.FilePermission D:/contacts read)
    at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
    at java.security.AccessController.checkPermission(AccessController.java:546)
    at test.Main.main(Main.java:38)
    plz help me out...

    amit.trical wrote:
    But it should grant me the permission.Are you saying you think that creating the FilePermission object should grant the permission? Or are you saying that calling the checkPermission method should grant the permission?
    Neither of those are true. Creating the FilePermission object gives you something about which you can ask if it's permitted or not. And calling the checkPermission method asks that question.
    To grant the permission to read that file, you must do that via the policy file. Java code can't grant itself any permissions (for obvious reasons).

  • Cannot access bookmarks using Safari on I-Phone

    I am suddenly unable to access bookmarks using Safari on my I-Phone. When I press the Bookmarks icon in the toolbar at the bottom, it doesn't come up with my bookmarks but shows another toolbar instead with a single button on the left hand side called "Edit". Bookmarks are all there and accessible when using Safari on my computer and have been imported to my I-Phone. The "Send webpage as URL" icon also doesn't do anything, neither does the "Home" icon. "previous" and "Next" icons do work.

    Turning off wouldn't help because settings would remain even after you restarted. So contact your email provider and them for the correct settings.

  • Unable to see Remote App and Desktop Connection in Group Policy Management Editor

    I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
    Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
    RD Gateway
    Remote Desktop Connection Client
    Remote Desktop Session Host
    But NOT
    Remote App and Desktop Connection
    Which I need. Is there anyway of adding this?

    > I am unable to see the Remote App and Desktop Connection in Group Policy
    > Management Editor on my 2012 R2 DC. I am therefore not able configure
    > the connection URL in Access RemoteApp and desktops in our Windows 8.1
    > client environment.
    http://gpsearch.azurewebsites.net/#8113
    Do you use a central store for ADMX? Is this central store out of date?
    (Means "still contains ADMX from W7/2008R2")
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Unable to access the login screen using web browser

    Hi!
    I have recently downloaded the peoplesoft HCM template from edelivery.oracle.com and created two virtual machines namely HCM-DB and PIA-APP. Now both the virtual machines are able to ping to each other but are unable to ping to the Oracle virtual server nor to the base machine on which the Oracle virtual manager is installed. Both the viirtual machine, the oracle vm server and oracle vm manager are in the same network 192.168.1.0.
    Secondly if I am starting the database then the PIA server. Still I am unable to access the login screen using the following url:- http://nsoln.com:8000/ps/signon.html.
    As, I am new to this field, any help would be a great asset for me to resolve the above issue.
    Thanking you..
    Yours Sincerely
    Santosh

    Check the server name in your httpd.conf file
    (ORACLEHOME\Apache\Apache\conf\httpd.conf) and look to see if it is in capital letters. If it is edit it to lower case. Reboot.

  • Unable to access Oracle VM Manager from browser

    Hi,
    I am unable to access the Oracle VM Manager from my browser at any of the url's e.g. /em; /OVS; /apex
    I can connect to my server via putty, so I know the IP address that I am using is correct.
    In the /var/ovm-manager/oc4j.log file I get the following message:
    ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
    The oc4j service is running and the ovs-agent service is running but I cannot connect.
    I am new to Oracle VM and Linux for that matter so it is entirely possible that something is not configured correctly somewhere
    I'll appreciate it if anyone can assist
    Thanks

    Try this command from the console or SSH to the server:
    service iptables stop
    If you can then access the URLs you will need to modify iptables to allow port 8888
    I think this is the command:
    iptables -I INPUT -p tcp --dport 8888 -j ACCEPT
    then:
    service iptables start
    Then try to connect again.

  • Unable to access Skype Manager

    I've been unable to access Skype Manager for 8 days now.  My account works fine to log in regularly via the skyep app (to make calls, chat, etc), and I can even login to the skype site to change settings for that account.  I just can't get into the Skype Manager.  When I do, I see an error message (screenshot below) either after I'm prompted for my login credentials, or immediately upon clicking the Skype Manager link if I'm already logged in.
    When I chat or email Skype support, they either claim that it's working fine, or they say that a "specialized department" (they always refuse to name the department when I ask) will take care of it and email me.  The email invariably arrive a couple of days later telling me that everything is working fine, and if for some reason it's still not working, I should contact Skype chat support.
    I tried reaching out to Claudius at @SkypeSupport via twitter and all I got back from him were these two non-specific and not-helpful tweets:  
    @mdavep I just successfully logged onmanager.skype.com in using IE9. Which browser are you using and which error do you see? ^CH
    (when I answered his question he did not reply)
    -and-
    @mdavep Which page are you trying to login? Your web account page is here:skype.com/go/myaccount ^CH
    (when I answered his question he did not reply)
    My business is suffering as a result of these problems, as I am unable to reassign phone numbers to my sales teams and make changes to my tracked numbers for my ad campaigns.  I'm probably losing about $250-$500 per day that this is not working.
    Screenshot:

    We've identified a login problem with Skype Manager and are working to resolve it as quickly as possible.
    Sorry for the inconvenience (and confusion caused by my follow up tweet).
    Unfortunately I can't share an ETA for the fix yet.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Javax.management.RuntimeMBeanException:Unable to access or transform markup

    I have a portlet that I created from an ADF application using the JSF Portlet bridge. I created the application/portlet in JDev 11.1.1.6. I am able to run the application locally and I am also able to display the WSRP Producer Test Page for the portlet (running on the Integrated WebLogic Server). I am also able to bring up the WSDL. We have a test WebCenter application running and when I try to register my portlet as a portlet producer I get the error javax.management.RuntimeMBeanException:Unable to access or transform markup when I click the OK button on the Register Portlet Producer page. Before clicking the OK button I clicked the Test button and I got the Test Connection Successful message.
    Any ideas on what could be causing this error? Where could I go to get more information about the error?
    Thanks for the help!

    The error "Unable to access or transform the markup from the WSDL URL" indicates that it was not able to resolve the WSDL URL. Check whether you are able to resolve this from the server and also you might have given random values to the proxy host and port values. The URL need to be resolved during registration so make sure you are providing the right host port values during update.

Maybe you are looking for