Unable to access data n 0PY_PP_C3 ODS

Hi,
We have extracted Payroll data and consolidated data is sitting in "Auditing and Postings Combined" ODS.
When I try to see the contents, its saying that I don't have authorization to see the same.
HR Functional Team is trying to access this data. Which ROLE and Authorization, we should have.
Its urgent. Please do let me know,

Hi Anand,
Normally the users are not given authroization for HR Cubes/ODS. Goto PFCG -> find the corresponding role and add yourself to that role.
Bye
Dinesh

Similar Messages

Unable to load data from an ODS to a Cube

Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: <b>"No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.</b>
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.

Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help!

TS3992 My Icloud back up shows huge amount of data stored from back up yet listed as incomplete. Unable to access data. Is data lost

My ICloud backup shows a huge amount of data stored, yet it is listed as incomplete backup. I am unable to access the backed up data. Is the data lost?
Thank you in advance for your assistance.

Unfortunately, if an iCloud backup is incomplete you can't access any of the data in it. The only way to access anything in the backup is to restore the entire backup, which can't be done if it is incomplete.

Unable to access data returned by EJB

Hi,
One of my EJB method(getHeaderInfo) returns string array (String[]). In the WSDL, I have following entries -
<complexType name="GetHeaderResponseType">
<sequence>
<any/>
</sequence>
</complexType>
<message name="GetResponseMessage">
<part name="header" type="tns:GetHeaderResponseType"/>
</message>
<portType>
<operation name="getHeaderInfo">
<input name="GetHeaderInfoRequest" message="tns:GetHeaderRequestMessage"/>
<output name="GetHeaderInfoResponse" message="tns:GetHeaderResponseMessage"/>
<fault name="GetHeaderInfoException" message="tns:ExceptionMessage"/>
</operation>
</portType>
<binding name="EJBBinding" type="tns:Data">
<ejb:binding/>
<format:typeMapping encoding="Java" style="Java">
<format:typeMap typeName="xsd:string" formatType="java.lang.String" />
<format:typeMap typeName="xsd:boolean" formatType="boolean" />
<format:typeMap typeName="tns:ExceptionType" formatType="java.lang.Exception"/>
<format:typeMap typeName="tns:GetHeaderResponseType" formatType="java.lang.String[]"/>
</format:typeMapping>
<operation name="getHeaderInfo">
<ejb:operation
methodName="getHeaderInfo"
parameterOrder="filepath filename" interface="remote" returnPart="header"/>
<input name="GetHeaderInfoRequest"/>
<output name="GetHeaderInfoResponse"/>
<fault name="GetHeaderInfoException"/>
</operation>
</binding>
When I execute the process I get following data in the output variable -
<header >
<header xmlns = "http://callhome.pillardata.com/" >
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
1 </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
BrickFlashDataRecord </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
IDcbefc68f </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
A001439BGX </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
2005-12-14T18:00:20-08:00 </string>
</header>
</header>
However I am not able to access data using XPath. Please suggest the proper way to write the WSLD and how to access the returned data in BPEL. Please let me know if further information is required.
Thanks,

Hi Justine,
I think you will have to look at the access restrictions on the Universe Folder and the Report itself, in the CMC. It would appear that your security rights did not migrate successfully.
Regards
Alan

Unable to Access Data Form with Users Provisioned as 'Planner'

Hello,
I am currently experiencing an issue that I can't seem to resolve. I was hoping someone else might have some insight and/or have come across this issue.
I created two data forms. Users have been assigned permissions to the dimensions included in the data form. I have also assigned users access to the data form. The model is a single currency model.
Upon logging into the application, the user is unable to open the data form unless he/she is provisioned as an 'Administrator'. Provisioning the user as a 'Planner' or 'Interactive User' does not allow the user to open the data form. The following message appears:
*"Security and/or filtering has resulted in a required dimension not being represented on this data form."*
My data form uses the following dimensions:
POV: ELEMENT
PAGE: SCENARIO, YEAR, VERSION, ENTITY
ROWS: ACCOUNT
COLUMNS: PERIOD
We are currently implementing Hyperion Planning 11.1.2.0. The operating system is Windows Server 2008 64-bit R2.
Any advice/suggestions on how to resolve this would be greatly appreciated. Thank you.
Corey

I went ahead a created a data form that just used level 0 members and confirmed that the user had access to the members defined in the form. Still no luck.
I also checked to make sure the filters existed in Essbase. Here is what I found in Essbase:
Access: None
Member Specification: @IDES("Account"),@IDES("Scenario"),@IDES("Version"),@IDES("Entity"),@IDES("NTTA_ELEMENT")
I have no issues accessing the data through the Essbase Add-in.
I did notice some additional items in my Planning setup:
1. Task>Manage Process - Sub-Status states 'Failed' when I attempt to validate
2. Task>Manage Process - Status changes from 'Not Started' to 'Under Review' when I start the cycle.
3. Dimension Security - Users are attached to a group that has write access at the Descendent(Inclusive) level.
4. In the Account, Department, Scenario and Version dimensions I also setup the user to have write access at the member level.
As for my earlier post with the data forms, that was just my way of showing the dimensions used. I do have two data forms, 1) with top level and descendants/children and 2) with level 0 members only.
I checked the logs and there isn't really much info there. I have a case open with Oracle and a webex scheduled for tomorrow.
Thoughts?
Thanks
Corey

Unable to access data downloads-need to read javascript/active x

I UPDATED THE GRAPHICS DRIVER TO ENABLE DATA DOWNLOADS but I am unable to open files. The reason given was"this file requires your computer to read javascript?active x".
What more can I do? I need to access these files!!!!!

Firefox doesn't do ActiveX. <br />
https://support.mozilla.com/en-US/kb/ActiveX

Unable to access data after running disc repair

I ran disc repair today as there is a problem with the hard drive. On restart the computer is displaying a login page. I have never had to login and now I cannot access any of my files or applications. How can I access my data?

Jugnu, welcome to Apple Discussions.
You posted in the Older Apple Hardware forum, but you have a relatively new Mac and are using Panther. Suggest you repost in the Panther forum at http://discussions.apple.com/forum.jspa?forumID=745
 Cheers, Tom

Unable to access data/storage space of failed primary partition after internet recovery

Hello,
So just a bit of quick background info to the issue: I experienced my first major failure with my iMac a few weeks ago (early Feb) where the main partition on my 3TB Fusion drive developed a corruption of some sort. I went through all the disk verification/repair procedures I could find, however nothing worked and I ended up with a grey screen on bootup that had a round logo with a slash through it. I tried a reinstall of OS X Yosemite from the recovery partition, however this failed part-way through, and I was forced to perform an internet recovery instead.
This worked, and I now have my iMAC stable again, however the recovery process created a new primary partition in addition to the old primary partition. This wasn't a major issue for me as I planned to recover some files from the failed partition that my backups had missed. Unfortunately since then, that old partition has disappeared and I can't get it back. I figure I have lost those files, but what is really annoying is the space that old partition took up has not freed up. My 3TB fusion drive is only letting me use 120GB of the space (the size of the new primary partition).
So I guess I have two questions:
1 - Is there a way to find and get the old partition back mounting again? The drives that list with a 'diskutil list; echo; diskutil cs list' command are attached, but do not appear to contain the old partition that I am after (I've tried manually mounting them via the terminal to check).
2 - If recovering that old partition is not possible, how do I go about freeing up the space it occupied?
System details:
OS X Yosemite v10.10.2
Mac (27-inch, Late 2012)
Processor: 3.4 GHz Intel Core i7
Memory: 16 GB 1600 MHz DDR3
Any assistance on this one would be greatly appreciated - I can't restore all my files from backups as I am running low on HDD space.
Cheers,
Nick
diskutil list; echo; diskutil cs list
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Promise RAID            3.0 TB     disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:          Apple_CoreStorage                         120.5 GB   disk2s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk2s3
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *120.2 GB   disk3
                                 Logical Volume on disk2s2
                                 B1226A78-ED30-4C0E-B398-216050D00D99
                                 Unencrypted
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 776BF278-C2A1-4AE9-A333-54698D103F63
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         120473067520 B (120.5 GB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 9E51C38B-4FFA-412E-BDD5-3454C7A54658
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk2s2
    |   Status:   Online
    |   Size:     120473067520 B (120.5 GB)
    |
    +-> Logical Volume Family 6BCF921C-0CAF-4567-88C1-9EF69D4D8D17
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume B1226A78-ED30-4C0E-B398-216050D00D99
            Disk:                  disk3
            Status:                Online
            Size (Total):          120154292224 B (120.2 GB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS

Hi Eric,
See attached screen shot - is that what you are after?
As you can see I don't have access to the rest of the 3TB fusion drive. I'm thinking I may have to do a clean OS install so I have prepared a Yosemite USB install key ready to go.
Unless you guys can suggest something that is.
Thanks in advance for your help,
Nick

Unable to access Data Plan

I just bought an unlock Verizon Blackberry storm 9550. I I tried to activate a data plan with Digicel Trinidad and i am getting a message stating that "Can not activate selected plan your device is incompatable with the service". Could you please help me in resolving this issue??

Check your Mobile Network and make sure you have it set to "Global"
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi, I forgot my password due to that unable to access data plz help me out

hi,
I purchased iphone 4s recently from canada where i put phone password which i forgot my password due to which not able to access my data

If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

Unable to access or view data with no authorization error

Hi Experts,
Appreciate your guys help. I am ID administrator where by some of our user ID unable to view data/ display report for the some of data even the appropriate authorization already assigned to the user. However when we check in the transaction SU53 - authorization checking no error shown!
There is a case whereby user report that his ID (e.g. SAP ID = ABC) unable to access a transaction or infotype data for example HR infotype masterdata,upon checking there is no authorazition error (checked insu53), when copy the ID (ABC) to another new ID (ABC1) with no changes on the roles, the ABC1 ID able to access the said transaction.However, when copy back ABC1 to the ABC (naming conversion only), the ABC ID still unable to access the transaction with no authorization error. the
main problem here is the original ID is not working, but works fine if it is copied to another ID name.
Kindly advice.

Hi Manikya Raju,
Can you explain details?

Fox code: unable to access infocube data

Hi Friends,
Multi planning area consists of 2 basic areas. One infocube based on key figure model and other infocube based on account model.
Now unable to access infocube(keyfigure model) data in multi area. Here my taget cube is based on account model.
Operand display format is
{Key Figure Name,Calendar Year/Month,Key Figure Type,Plng Area}.
I haven't used any fields for condition. Below is excerpt of code.
calmon is global varible with range 04.2006 to 03.2007
DATA BPER TYPE 0CALMONTH. 'begin period
DATA SPER TYPE 0CALMONTH. 'starting period
DATA DPER TYPE 0CALMONTH. 'previous period
DATA COUNTER TYPE I.
SPER = VARI('CALMON',1).
DO.
BPER = TMVL(SPER,COUNTER).
DPER = TMVL(BPER,-1).
IF COUNTER > 0.
Assign previous period closing stock to opening stock
{ZQTY,BPER,000074,CASHFLOW} = {ZQTY,DPER,000079,CASHFLOW}.
ENDIF.
COUNTER = COUNTER + 1.
Production from crushing(28.5%)
{ZQTY,BPER,000076,CASHFLOW} =
{ZCRUSHING,BPER,#,SPROPLAN} * (28.5 / 100).
Raw Closing stock
{ZQTY,BPER,000085,CASHFLOW} =
{ZQTY,BPER,000084,CASHFLOW} -
{ZRAWSUGAR,BPER,#,SPROPLAN}.
IF COUNTER = 12.
EXIT.
ENDIF.
ENDDO.
Could any one of you help me out in this regard..appreciate ur help with points..
thanks,
RP
I also tried by incorporating versions too..
{Key Figure Name,Calendar Year/Month,Key Figure Type,Version,Plng Area}
Plan version
DATA NVER TYPE 0VERSION.
NVER = VARV(PVER). " returns globle variable value
{ZQTY,BPER,000074,NVER,CASHFLOW} =
{ZQTY,DPER,000079,NVER,CASHFLOW}.
{ZQTY,BPER,000076,NVER,CASHFLOW} =
{ZCRUSHING,BPER,#,FPV,SPROPLAN} * (28.5 / 100).
FPV is final version of SPROPLAN(planning application)
{ZQTY,BPER,000085,NVER,CASHFLOW} =
{ZQTY,BPER,000084,NVER,CASHFLOW} -
{ZRAWSUGAR,BPER,#,FPV,SPROPLAN}.
thanks, ...RP
I tried by inserting two fields Fiscal yr & value type in "fields for condition" , still i'm not getting..what might be the reason?
Is there any other way to achieve this?
thanks...RP
I'm already using standard area SPROPLAN in another multi-area, in that multi-area consists of 2 cubes both are based on key figure model only and correctly able to access the data for that application requirement, but here i'm not able to access SPROPLAN cube's data. I checked with different combinations. Any suggestions....
thanks,..RP
Keyfigure ZCRUSHING of SPROPLAN plannning area is already accessed in just above mentioned mulit-area, is because of this, am i getting the problem? Is there any refresing setting i have to mention?...thanks
Edited by: Kumar RP on Mar 27, 2008 1:51 PM
Edited by: Kumar RP on Mar 28, 2008 7:42 AM
Edited by: Kumar RP on Apr 1, 2008 6:53 AM
Edited by: Kumar RP on Apr 2, 2008 11:20 AM

Myself corrected code by using operand format as
{Key Figure Name,Key Figure Type,Plng Area}.
regards,
RP

Unable to access data n 0PY_PP_C3 ODS

Similar Messages

Maybe you are looking for