Unable to access hosts from outside local network

I have set up a few different name-based virtual hosts for a small client. DNS is set up correctly; sites can be accessed internally; everything is working OK.
However, none of the virtual hosts can be accessed from outside their internal network. I know for a fact that DNS is set up correctly as dig tells me so. Firewall port 80 is open and everything (mail, vpn, etc.) else is working fine.
I've looked over the httpd config files many times and just can't seem to find anything wrong. Any suggestions on where to look for problems?
Xserve Mac OS X (10.4.5)

What if you swap out your Apache config for a moment with the default one? Do you have reason to think that it's something in your name-based virtual host settings?
Can you access a web site from the outside if you only have the default config on there, accessing it maybe via IP address?
If so, we'll probably need to know more about your virtual host setup in order to troubleshoot this any further, considering you have other services running and accessible on the machine.
Are you getting any errors? What happens when you try to reach one of the websites? Have you looked at your error log for any of the sites?

Similar Messages

SMB not working from outside local network

Hello,
On my old MacBook I installed OS X Server to create a file sharing server. I set it up using my public IP address so that I could access my files from outside the local network. I don't have an Apple router, but I found the port number for SMB and AFP and did the port forwarding. My issue is that smb stopped working. It used to work out side the network because it tested it. My Mac can still connect though outside the local network using my public IP. I have no clue why SMB is not working as it was working recently. My only idea is that I got a new modem from my ISP. Could that make a difference? I don't get it because AFP still works fine. File sharing using SMB is checked in the server app and file sharing preferences so it is not that. I am using OS X 10.8.4 on a MacBook running OS X Server version 2.2.1. Any help would be appreciated.
Thanks,
Michael

Is it a modem only, or is it a modem/router that might be creating a double-NAT on your network?
Incidentally, since you're running Server, you might want to use the built-in VPN gateway to give yourself better security - tunneling AFP/SMB through a router/firewall is pretty insecure.
Matt

I unable to access SDN from my office network through Internet Explorer.

Hi,
I unable to access sdn site from my office network through Internet Explorer.
I can able to access using navigator or firefox..
Any setting need to be done.
Cheers,
Sam

Hi Sam,
check you connection settings in IE specially the proxie settings.
Regards
Bernd

Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

Hi,
I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get
the page to give login details once I have login details I got below error. Please help me to solve this issue. It was working before.
Access denied You do not have sufficient access rights or privileges to perform this action.
Regards,
Noushad
[email protected]

On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
Refer
this on how to update host file.
Regards, Saad

Open Directory access from outside of network / internet

Hello all,
Got a question I'd love to get some help on, I have some users who are outside of my network and I'd like them to connect into the open directory on our leopard server so they can use the Shared iCal calendars, addresses, etc.
So my questions are A) Is it possible to connect in from outside the network and get access to the directory without having to have a seperate user account and use our VPN every time you want to connect? - if not is this the only way to do it (would you have to connect via the Mac VPN and then connect to the directory?)
B) is it possible to do this "seamlessly" so that you don't have to change any settings, login details each time you switch between your local user from outside the network and your directory access. (so basically if you are in iCal if you have internet access it will connect you to the directory, without you doing anything extra?)
Hope that makes sense, I can't seem to find the answers I need in the manuals, if I knew how this was meant to work I could probably have a fair go at figuring out how to actually do it (firewall changes etc)
Thanks in advance for the help
Martin

So my questions are A) Is it possible to connect in from outside the network and get access to the directory without having to have a seperate user account and use our VPN every time you want to connect? - if not is this the only way to do it (would you have to connect via the Mac VPN and then connect to the directory?)
If your OD server is visible from the internet -- i.e., it has a public address -- then you can do this without the VPN. However, it's not advisable to have a server exposed in that fashion.
You would be better off doing this through the VPN:
- Remote user connects to internet at hotel, for example.
- Remote user initiates VPN connection.
- Remote user now has access to iCal server and directory information.
Explain to the users that this information is private to the company, and private company resources are only available through the VPN. Allowing access without the VPN would be similar to the company posting its Employee roster and meeting calendars on the face of the building where any person (or competitor) could see them.
B) is it possible to do this "seamlessly" so that you don't have to change any settings, login details each time you switch between your local user from outside the network and your directory access. (so basically if you are in iCal if you have internet access it will connect you to the directory, without you doing anything extra?)
It's just one extra step: Connect to VPN. You're still the same local user on the computer.
If you're talking about laptop users needing directory access to authenticate when logging into their computers, well...That sounds like a whole other situation.
Hopefully this helps.
Bryan Vines

Access SAP through SAPRouter from outside of Network

Hello All,
As my SAPRouter cerificate got expired i genrated new certificate & import same into SAProuter. And this time my router is working fine.
But this time i want to access from outside of network so added this entries in my SAProutab as follow:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <Public ip>
P <Public ip> 194.39.131.34 3299
P <my router ip> 194.39.131.34 3299
P 172.16.. 194.39.131.34 3299
P 194.39.131.34 172.16..
P 194.39.131.34 <Public ip> 3299
S * <my SAP ip> 3200
P <Public ip> <my SAP ip> 3200
Note:
SAP System No: 00
DEV_Rout
trc file: "dev_rout", trc level: 1, release: "700"
Thu Sep 30 11:38:25 2010
SAP Network Interface Router, Version 38.10
command line arg 0: F:\usr\sap\saprouter\saprouter.exe
command line arg 1: -r
command line arg 2: -W
command line arg 3: 60000
command line arg 4: -R
command line arg 5: F:\usr\sap\saprouter\saprouttab
command line arg 6: -K
command line arg 7: p:CN=<HOSTNAME>,OU=0000*****,OU=SAProuter,O=SAP,C=DE
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "F:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll".
File "F:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
main: pid = 2028, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: 'F:\usr\sap\saprouter\saprouttab'
I am not able to access my sap from outside of network.
SAP Router String: /H/<PUBLIC IP>/S/3299/H
Any idea. Thnaks in advance
Regards.

Hi,
Hope you have private external IP than dynamic which changes every now and then you can this:
P <Public ip> * 3299 or P <Public ip> SID_IP 3299
Also look for your the logs for saprouter and your router logs if this not works.
Regards;

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

Microsoft Exchange Server 2013 - Unable to recieve emails from outside

I'm having problems setting up brand new installation of EXCH 2013 on the VM server.
Infrastructure - main server Windows Server 2012 Standard, a VM server. Domain vwc.local, VM server introduced to domain. EXCH 2013 installed on VM server.
I'm able to send emails outside, but unable to receive ones from outside. Server provider A, MX records point to mail server. The local router redirect SMTP traffic to VM server - all ports.
According to Wireshark the SMTP traffic hits the VM server, but no connection with EXCHG receivers can be established. The external domain name - valleywomenscarepllc.com. Firewall is turned off. The receive connectors are setup to accept anonymous connection,
use all ip addresses associated with the VM server network adapter. Netstat shows that 25 port is available. Connectors are in an valid state by running ECHG commandlets.
I'm running out of ideas. Please suggest an area for research or request additional info to narrow down possible causes.
Thanks in advance!

Thanks to everyone!!!
Turned out that MX record was pointing to mail.valleywomenscarepllc.com. I changed to point to valleywomenscarepllc.com and all immediatelly - external OWA, ECP started working as well outside emailed delivering.
I've been fighting with EXCHG for over month, encountered multiple issues, and finally got it working. Thanks to everyone for suggestions!
Can anyone suggest on mobile dvice access. I setup my iPhone mail to to work with valleywomenscarepllc.com, however I get error that the server cannot be verified. ECP\Mobile access is on, no mobile device policies are in the effect, the autosync is
allowed on the user mailbox level though I get this error. Has anyone ever encountered similar issue?

Do I need a domain name in order to connect to my Mini Server 10.8.2 from outside my network?

I am working on setting up my mac mini server. Aside from in home file sharing I want ot be able to connect to some files remotely and even upload files, say pictures from my camera, to my server from outside my network. I am only looking to have maybe 2 users that have access. Should I get a domain name from a place like GoDaddy? in order to set up server to use domain in initial setup? I have 2 Drobos connected with my music, videos and pictures and I wat to access them from an Android, Windows and iPod device when away from home. Any how-tos out there or good step by step guides?
Thanks for any information.
-Peace
-Dave

A normal address like www.domain.com is intended to work with static IP addresses, DynDNS is a service specifically intended for dynamic addresses and it will therefore automatically update the address e.g. name.dyndns.org to match the dynamic IP address each time it changes.
Some home broadband routers have built-in support to act as a DynDNS client but if yours does not then you can run the DynDNS software on your Mac server. This will then tell the DynDNS servers what your current dynamic IP address is so they can map it to your host name.
The result will be that your users can use a name like yourname.dyndns.org to access your server and not have to worry about the fact your IP address may change.
You would still need to run a VPN server to allow your remote users to connect to your network but OS X Server can do this. You could also run a website but depending on your needs that might be better done by using a web hosting service.

HT4623 unable to access itunes from ipad

I am unable to access itunes from remote devices which include my ipad and iphone. When I try to purchase apps etc, I am advised "Cannot connect to itunes Store"

Hello marie-louise,
I recommend taking a look at this section of the article Can't connect to the iTunes Store found here http://support.apple.com/kb/ts1368.
Troubleshooting on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to 3G, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
Try resetting (turning off and then on again) your Wi-Fi router
If the issue persists, see troubleshooting Wi-Fi networks and connections.
Note: All iPhone, and iPod touch models support 802.11b/g Wi-Fi networks. In addition, iPhone 4, and iPod touch (4th generation) support 802.11n Wi-Fi networks (2.4 GHz only).
And if that does not resolve the issue take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
All the very best,
Sterling

Unable to access values from database in login page..

Hey all,
Friends I have a login.jsp page and I want if i enter username and password then it will be accessed from database and after verifying the details it will open main.jsp.I made a database as "abc" and created DSN as 1st_login having table 1st_login. But the problem is that I am unable to access values from database.
So Please help me.
Following is my code:
<HTML>
<body background="a.jpg">
<marquee>
                    <CENTER><font size="5" face="times" color="#993300"><b>Welcome to the"<U><I>XYZ</I></U>" of ABC</font></b></CENTER></marquee>
          <br>
          <br>
          <br>
          <br><br>
          <br>
     <form name="login_form">
          <CENTER><font size="4" face="times new roman">
Username
          <input name="username" type="text" class="inputbox" alt="username" size="20" />
          <br>
     <br>
          Password
          <input type="password" name="pwd" class="inputbox" size="20" alt="password" />
          <br/>
          <input type="hidden" name="option" value="login" />
          <br>
          <input type="SUBMIT" name="SUBMIT" class="button" value="Submit" onClick="return check();"> </CENTER>
          </td>
     </tr>
     <tr>
          <td>
          </form>
          </table>
<%
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connection = DriverManager.getConnection("jdbc:odbc:1st_login");
Statement statement = connection.createStatement();
String query = "SELECT username, password FROM 1st_login WHERE username='";
query += request.getParameter("username") + "' AND password='";
query += request.getParameter("password") + "';";
ResultSet resSum = statement.executeQuery(query);
//change: you gotta move the pointer to the first row of the result set.
resSum.next();
if (request.getParameter("username").equalsIgnoreCase(resSum.getString("username")) && request.getParameter("password").equalsIgnoreCase(resSum.getString("password")))
%>
//now it must connected to next page..
<%
else
%>
<h2>You better check your username and password!</h2>
<%
}catch (SQLException ex ){
System.err.println( ex);
}catch (Exception er){
er.printStackTrace();
%>
<input type="hidden" name="op2" value="login" />
     <input type="hidden" name="lang" value="english" />
     <input type="hidden" name="return" value="/" />
     <input type="hidden" name="message" value="0" />
     <br>
          <br><br>
          <br><br>
          <br><br><br><br><br>
          <font size="2" face="arial" color="#993300">
     <p align="center"> <B>ABC © PQR</B>
</BODY>
</HTML>
and in this code i am getting following error
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:94: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:95: cannot find symbol_
4 errors
C:\Project\SRS\nbproject\build-impl.xml:360: The following error occurred while executing this line:
C:\Project\SRS\nbproject\build-impl.xml:142: Compile failed; see the compiler error output for details.
BUILD FAILED (total time: 6 seconds)

As long as you're unable to compile Java code, please use the 'New to Java' forum. This is really trival.
To ease writing, debugging and maintenance, I highly recommend you to write Java code in Java classes rather than JSP files. Start learning Servlets.

Is there a way to access 11i from outside other than Self service?

Is there a way to access 11i from outside other than Self service?
I could connect any application from inside the firewall (basically router) and can not access screens from outside. Eventhough port forwarding 80 allows us upto initial screen, it does not go further.
Any workaround/suggestions
Jiltin

Hi Jiltin,
If you can migrate your forms server into Forms Listener Servlet.This will allow you to use forms outside firewall provided atleast one port(assuming yours 80) is open.
Ref to the M.Link Note 201340.1 for how to setup forms listener servlet.
Magesh

I live in Saudi Arabia and intend to buy an iPhone 5 (unlocked version) from U.K. I want to know, would it be possible to claim warranty from the local network operator which is the official Apple iPhone seller i.e. Mobily. Would they repair/replace ?

I live in Saudi Arabia and intend to buy an iPhone 5 (unlocked version) from U.K. I want to know, would it be possible to claim warranty from the local network operator which is the official Apple iPhone seller i.e. Mobily. Would they repair/replace my iPhone 5 ?

You would need to return to U.K. for warranty service. The iPhone warranty is not international.

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

Unable to access localhost from network

I can not access main page from other computers of the network. the ip of main computer is http://192.168.1.8:5050/examples/servlets/index.htmlwhen i put in connection specs of my browser then i can see it but unable to interact with database as message appears: " Connection refused "
any help please

I can not access main page from other computers of
the network. the ip of main computer is
http://192.168.1.8:5050/examples/servlets/index.
html
This looks like a Private IP address to me: 192.168.1.8. Pls see here for more info. http://en.wikipedia.org/wiki/Private_network
Unless your Gateway (router) is configured to map and relay private IPs, it may not be accessible from outside. Note- looking up by hostname may still be possible from external machine, in which case your DNS will return a public IP for the hostname.
Also ensure your firewall (if, any, e.g. Windows XP default) allows you to access port 5050 from external machine.
-BJ

Unable to access hosts from outside local network

Similar Messages

Maybe you are looking for