Unable to access labview general zone from NI's website

Hello, can anyone else access it? What's the best alternative to it?
I use google group but it seems not all the posts are updated at
comp.lang.labview .
Thanks,
Joe

Joe,
I apologize for the inconvenience. We are experiencing some technical
difficulties that are affecting the ability to browsing between the
categories in the forums.
You can still post, view, and search for postings. In addition your
subscriptions should still work correctly.
We are actively working to resolve the behavior, and apologize for any
inconvenience or confusion this caused.
Evan
National Instruments

Similar Messages

Unable to access LAN behind RV042 from QUICK VPN Client once it connects

Hi,
Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
What's the problem in configuration? What i have to do?
Thanks
VC Gundapaneni

Hi There.
have a look over here.
http://www.linksysinfo.org/index.php?threads/netbios-issues-with-vpn.16170/

All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, macbook pro). I am able to access from my husband's HP windows laptop and from a Mac computer at the college.

All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, Macbook Pro). I am able to get access from my husband's HP windows laptop and from a Mac at the college. Any ideas?

http://support.apple.com/kb/HT5621
In short, you have a problem we can't solve.
I suggest you contact Apple support and make an appointment to get help. Expect to pay for it.

HT1933 I am unable to access my apple account from my iPad... What could the problem be?

am unable to access my apple account from my iPad... What could the problem be?

What happens when you try to access it, and you how are you trying to access it ? If you are getting an error message then what does it say ?

Unable to access Component Controller attributes from Views.

Hi,
I am unable to access the attributes in component controller from methods in View even by using WD_COMP_CONTROLLER.
Say, I want to access the attribute G_FLAG in component controller from a method in the View Controller by the following code :
WD_COMP_CONTROLLER->G_FLAG = 2.
Then an error message is showing up saying - Field G_FLAG is unknown. It is neither in one of the specified tables nor defined by a DATA statement.
What should I do? Plz suggest..

Hi,
Please check the Public check box of the attribute in the component controller.
Hopefully it will solve your problem.
Thanks

I am unable to access my Backup even from Icloud

Please help. It looks like I might have lost everything from my Iphone inculuding all backups

Hello, Indra!! The Tiger.
Thank you for visiting Apple Support Communities.
I would need clarification on what you mean by you are unable to access your Gmail account to better assist you. However, here are the best two articles to go through when experiencing issues with a Gmail account on an iOS device.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Cheers,
Jason H.

Unable to access my iCloud mail from an portal and need in ASAP. How can I access my messages?

At around 9:00P Pacific last night, I received my last email message through iCloud to my [email protected] address. I've tried on my iPad, PC, MacBook Pro and iPhone. I've done a full password reset to be compliant with the newest password standards. I've deleted my iCloud account from my MacBook Pro and iPhone. I've reset network setting on iPhone. Then I tried to log into iCloud.com (should have tried earlier) and I can get to all my applications (calendar, documents, etc.), EXCEPT Mail. I can't find any available route to access my .me mail and need to get to it urgently for travel plans and work documents.
Any suggestions? Please assist if possible.
So far, Apple hasn't been able to help either.
TA

The Apple Support Page, http://www.apple.com/support/icloud/systemstatus/ has the following on the status:
iCloud: Mail & Notes - Users Affected: <1%
01/08/2012 09:43 PST
Users may be unable to access Mail. Service is expected to be restored by 8pm PST today. All messages will be delivered at that time.

I'm unable to access the Itunes Store from my Windows 8?

I recently recieved a new laptop, operating on Windows 8. {Note: This is my first Windows computer, I transferred over from Mac}. I decided to open up a new Apple ID to get away from my parent's account, so that was all set up pretty easily.
Now, however, i find that I can't access the Itunes store from the Itunes application.
A message, I'm unable to find it now, it no longer appears, instead I get a blank screen instead of the store, read something similar to "not being able to open itunes store, please check your cookies and account details. {sorry if that's too vague, but it definitly had to do with my cookie settings making it unable to open.}
I'm at a loss at what to do next. My account is perfectly set up, but where and how to adjust the cookies so that the itunes store can open?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Unable to access my iCloud account from any device?

I am unable to log into my iCloud account through the web and apps on iOS and OS X that's connected to iCloud... Now I'm being disconnected from already logged in apps and is making reenter my password, but even when I do, it gives me an error. On the website all it says is 'iCloud encountered an error while trying to connect to server'. But when I tried using my old iCloud account, it was easily accessible... Can somebody help me out? This is very inconvenient...

The Apple Support Page, http://www.apple.com/support/icloud/systemstatus/ has the following on the status:
iCloud: Mail & Notes - Users Affected: <1%
01/08/2012 09:43 PST
Users may be unable to access Mail. Service is expected to be restored by 8pm PST today. All messages will be delivered at that time.

Unable to access Oracle VM Manager from browser

Hi,
I am unable to access the Oracle VM Manager from my browser at any of the url's e.g. /em; /OVS; /apex
I can connect to my server via putty, so I know the IP address that I am using is correct.
In the /var/ovm-manager/oc4j.log file I get the following message:
ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
The oc4j service is running and the ovs-agent service is running but I cannot connect.
I am new to Oracle VM and Linux for that matter so it is entirely possible that something is not configured correctly somewhere
I'll appreciate it if anyone can assist
Thanks

Try this command from the console or SSH to the server:
service iptables stop
If you can then access the URLs you will need to modify iptables to allow port 8888
I think this is the command:
iptables -I INPUT -p tcp --dport 8888 -j ACCEPT
then:
service iptables start
Then try to connect again.

Unable to access TC hard disk from PC

I have been unable to access the TC wireless and hard disk from my PC. I have both a Mac and a PC...the Mac works fine. I'm not using the TC to access the internet I just want to use it for back up and file storage for now. The message i get from the pc when i try to access the airport disk is "could not connect to the disk. Make sure NetBIOS is enabled and try again (53)."
I have tried to add the IP Address to my Norton software, I have even disabled Norton and that didn't help. I have tracked down the secret location of the NetBIOS and made sure it was enabled...but i get the same message.
Anyone have any other ideas? I love the TC for MAC but i need it to work for both systems or I'm going to have to take it back! Please help!

Ok...I stumbled onto the solution after being told by several people to have windows rebuilt and almost charged $130 from Dell Tech Support!
While attempting to share files from my Dell to back up on my Mac in order to reformat windows...yea it was getting to that point...Windows had me run the network setup wizard. During the set up there is a "file and printer sharing" choice to make and the default is of course "turn off file and printer sharing" which is of course the key to accessing the TC.
I did complete the setup for a new network, renaming the workgroup and making sure the other settings jived with all the TC settings I have thrashed through for nearly two weeks.
I hope this saves someone a little time and a lot of frustration. Thanks to all the other posts about this issue, it was good to know that other people face the same type of problem and there were a million ways around it.

Unable to access Custom UDTs returned from a Java Stored Procedure

Hi,
I have a UDT in the DB :-
create type contactrecord as object (
CN_ID NUMBER(8),
CN_TITLE VARCHAR2(40),
CN_FIRST_NAME VARCHAR2(25)
and this is the corresponding java class ContactDetails.java that maps to this UDT, that I loaded in the Aurora VM.
package package1;
mport java.sql.SQLData;
import java.sql.SQLException;
import java.sql.SQLInput;
import java.sql.SQLOutput;
public class ContactDetails implements SQLData
private String sql_type;
private long CN_ID;
private String CN_TITLE;
private String CN_FIRST_NAME;
public String getSQLTypeName() throws SQLException
return this.sql_type;
//implementation of readSql
public void readSQL(SQLInput stream, String typeName) throws SQLException
sql_type = typeName;
CN_ID = stream.readLong();
CN_TITLE = stream.readString();
CN_FIRST_NAME = stream.readString();
public void writeSQL(SQLOutput stream) throws SQLException
stream.writeLong(CN_ID);
stream.writeString(CN_TITLE);
stream.writeString(CN_FIRST_NAME);
//getters and setters for the class vars go here.....
There is another class A.java that has a java stored procedure/function, which I loaded into the Aurora VM
Here is the class.
package package1;
public class A
public static ContactDetails returnObject(String name )
ContactDetails cd = new ContactDetails();
cd.setCN_ID(1);
cd.setCN_FIRST_NAME(name);
return cd;
Then I declared the call spec for A.returnObject() as
FUNCTION returnObject(name varchar2) return contactrecord
AS LANGUAGE JAVA
NAME 'package1.A.returnObject(java.lang.String) return package1.ContactDetails';
Then I tried to call the function returnObject through JDBC calls from a class in another VM.
When I access the object returned by the function, I get a null object.
Here is the Client code:
CallableStatement cs = null;
ResultSet rs = null;
try
cs = conn.prepareCall("{ ? = call returnObject(?) }");
java.util.Map map = conn.getTypeMap();
map.put("ADMIN.CONTACTRECORD", Class.forName("package1.ContactDetails"));
conn.setTypeMap(map);
cs.registerOutParameter(1, OracleTypes.STRUCT, "ADMIN.CONTACTRECORD");
cs.setString(2, "John Doe" );
cs.execute();
ContactDetails cd = (ContactDetails)cs.getObject(1);
System.out.println("contact first name is:-"+cd.getCN_FIRST_NAME()); //Null Pointer here..cd is null....:(
if (cs != null) cs.close();
catch(Exception e)
e.printStackTrace();
Although If I try to access the same function from a pl/sql block, I am able
to access the contactrecord fields.
What could be wrong ..???
I could not find any error with the object mapping, as it works perfectly when I interact directly from my VM to the DB,
without going thru the aurora VM.
I am using a OCI driver to connect to the DB via JDBC.
Thanx in advance for any help at all.
-sk

Shahid,
I too have had bad luck in many cases with the automatic translation of Java types to PL/SQL and back. I think the SYS package on the PL/SQL side which handles some of the conversion is DBMS_PICKLER (there are equivalent Java classes which do the same in that world and seem to execute automagically when a conversion is needed). You might want to double-check the data type mappings against the DOC on OTN to make sure they map 1-1. Also make sure the permissions are granted against your objects to whoever is executing them, etc. Very often, I've resorted to passing simple scalar types between the two languages as in some cases the results with complex types are inconsistent.
Sorry this isn't much help,
-Dan
http://www.compuware.com/products/devpartner/db/oracle_debug.htm
Debug PL/SQL and Java in the Oracle Database

I am unable to access my sync key from firefox on my xoom, can you send me the key?

I am unable to sync my firefox bookmarks to my moto bionic, I setup sync to my xoom and am unable to retrieve the sync key from firefox on xoom. There is no option to manage my account in the sync prefs.

The sync key is listed in the Saved Passwords which can be found at https://support.mozilla.com/en-US/kb/Options%20window%20-%20Security%20panel it will be listed as chrome://weave (Mozilla Services Encryption Passphrase) then click the show passwords button to view the sync key.

Unable to access the secondary WISM from the diffrent VLAN

Hi,
We have got 2 WISM,We are able to access the primary WISM from the diffrent VLAN through GUI mode,But we are not able to access the secondary WISM from diffrent VLAN through GUI mode.We are able to access the secondary WISM from WISM management VLAN.I am attaching the WISM management config below.
Core1
VLAN 4 ---- Wism Management
ip address 172.16.10.2/24
HSRP 172.16.10.1
Primary WISM IP address 172.16.10.4
Core2
VLAN 4 ---- Wism Management
ip address 172.16.10.3/24
HSRP 172.16.10.1
Secondary WISM IP address 172.16.10.5
Can any one get me the solution for this.
Regds
Saji k.s

Check if the routing from VLAN is enabled . Make sure Management and Ap-Manager interface must be un-tagged for example Vlan 0 when they are on the Native Vlan of the trunk. Remove the tags from the management interface.
Also check if you have Filters created that blocks access to secondary WiSM.

Unable to access to Business rules from planning

HI all,
We are using Hyperion Planning 9.3.1, Essbase 9.3.1 and AAS 9.3.1.
Unfortunately, we are not able to access to business rules from planning.
All rights are set properly, the business rules are visible through AAS 9.3.1 and are accessible from all locations.
When we go to tools/business rules and select the database, we are not able to see any business rules.
If someone has any idea, it will help us a lot,
Thanks for reading this post, guys.

Thanks for your help John,
Unfortunately, we do not have the directory \HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes\.
We tried to put the file in the directory \HyperionPlanning\deployment\tomcat\HyperionPlanning\webapps\HyperionPlanning\web-inf\classes\
But it still doesn't work.
For your information, we are currently using TOMCAT as web server.

Unable to access labview general zone from NI's website

Similar Messages

Maybe you are looking for