Unable to access LAN behind RV042 from QUICK VPN Client once it connects

Hi,
Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
What's the problem in configuration? What i have to do?
Thanks
VC Gundapaneni

Hi There.
have a look over here.
http://www.linksysinfo.org/index.php?threads/netbios-issues-with-vpn.16170/

Similar Messages

RV042 quick VPN client cant ping lan network

Hi guys,
I've just created a client2gateway IPSec tunnel on RV042 and use Quick VPN client on remote PC trying to connect this router.
Quick VPN showed the tunnel was establised. But I couldn't ping the Lan network behind the router RV042.
Can anyone help me ?
Thanks.

Hi,
I modified the client2gateway mode to Client access mode.
Now I can ping (from QuickVPN client) to 172.16.1.0/24 network behind the router RV042.
But if I put another subnet as 10.92.x.0 behind this router, I still can't ping. Since Client access configuration is too simple, I cannot find a way to modify the subnet.
Seems 172.16.1.0 is default. Am I right?

All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, macbook pro). I am able to access from my husband's HP windows laptop and from a Mac computer at the college.

All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, Macbook Pro). I am able to get access from my husband's HP windows laptop and from a Mac at the college. Any ideas?

http://support.apple.com/kb/HT5621
In short, you have a problem we can't solve.
I suggest you contact Apple support and make an appointment to get help. Expect to pay for it.

HT1933 I am unable to access my apple account from my iPad... What could the problem be?

am unable to access my apple account from my iPad... What could the problem be?

What happens when you try to access it, and you how are you trying to access it ? If you are getting an error message then what does it say ?

Access Site to Site Networks behind Cisco ASA thru VPN Client

I have configured remote access thru asa for vpn clients to our main network. I can ping the required networks from vpn client. Internally I can ping remote network thru our sonicwall site to site vpn. I however cannot ping the remote network from the vpn client. I've added the network in the configuration on the ASA that I am trying to connect to. Any ideas what I can do so I can connect to Site B thru my vpn client connecting to Site A?
Thanks,
Matt

Hello, matt0000111111.
Did you add a VPN clients network to the sit-to-site VPN settings and to the NAT list (if nat exist at the interfaces at site-to-site vpn)?

Installing Quick VPN Client on Windows 8.1

Hi Guys
We use Quick VPN Client to connect to our office using the RV016 VPN Router.
The QuickVPN Client works fine on Windows XP, Windows 7. It also worked fine on Windows 8 initially.
Recently we noticed that when we try to use the QuickVPN Client to connect to our office VPN, the client application is just waiting and showing the message connection and not proceeding any further from that screen. Becuase of the we are unable to connect to our office VPN from Windows 8 or 8.1.
Does anyone here has some useful tips to make the QuickVPN Client work again successfully from Windows 8 or Windows 8.1?
Looking forward to hearing from you guys
Regards
Jo

I've been able to use Quick VPN successfully on several Windows 8 and 8.1 machines by doing the following:
Right-click on the Quick VPN desktop shortcut and then click on the compatibility tab. Under "compatibility mode, select, "Windows Vista (Service Pack 2); under "Settings", click, "Run the program as an administrator".
In Windows firewall advanced settings, add inbound and outbound allow rules for port 60443.
In Windows firewall advanced settings, add an outbound allow rule for ICMPv4
If you're using Adobe Creative Cloud, you'll need to quit the Creative Cloud Desktop application in order to use Qucik VPN. CEFHelper.exe (used by the Creative Cloud Desktop application) has a dependency/lock on wget.exe, and will cause Quick VPN to not respond at the certificate recognition phase. Quitting the Creative Cloud Desktop application (and thereby killing CEF Helper) allows Quick VPN access to wget.exe and it will then function normally.
**Edit; addendum** Windows updates as of 2013-04-20 require that rules in Windows firewall advanced settings be established that allow wget.exe both inbound and outbound. Path is %ProgramFiles% (x86)\Cisco Small Business\QuickVPN Client\wget.exe for 64-bit Windows machines.

Router WRV54G Quick vpn client 1.10 ruuing on XP (remotel...

router WRV54G
Quick vpn client 1.10 ruuing on XP (remotely)
well, the client can connect to VPN router and i can verify the status online on tab vpn BUT
after 2-3 min. client receive the error message
"the gateway not responding"
AND
if client tries to ping from command prompt to the local ip addresses he find "negociating IP security"
status of router is :
- all security including firewall is disabled
- i have public IP address on Router having 255.255.255.0 subnet
- my local subnet is 10.10.1.x
please tell me what should be done
Thanks
Message Edited by SHAQ on 12-18-2007 09:26 AM

try upgrading / reflashing the firmware of the wrv54g to the latest available from www.linksys.com/download
try changing the MTU size on the client router to 1452
check whether it makes any difference

Where to get the "Linksys Quick VPN client" for my RV082

I tried some links like http://linksys.com/support
but that one is broken.
So where can I get the "Linksys Quick VPN client"
Not for 50 clients only need is for 3 clients, but still need a client to download.

Hi awestin, please be directed to the Cisco Small Business Community as they are now the ones providing support for the RV082.
https://supportforums.cisco.com/community/netpro/small-business
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Remote Access VPN - Unable to Access LAN / Inside Network

Hi,
I am facing a problem with Cisco ASA remote access VPN, the remote client is connected to VPN and receiving IP address but the client is not able to ping or telnet any internal network.
I have attached running configuration for your reference. Please let me know I miss any configuartion.
FW : ASA5510
Version : 8.0
Note : Site to Site VPN is working without any issues
Thanks
Jamal

Hi,
Very nice network diagram
Are you saying that originally the VPN Client user is behind the Jeddah ASA?
If this is true wouldnt it be wiser to just use the already existing L2L VPN between these sites?
In real situation I think the VPN Client would only be needed when you are outside either Head Quarter or Jeddah Network. And since you tested it infront of the ASA and it worked there shouldnt be any problem.
Now to the reason why the VPN Client isnt working from behind the Jeddah ASA.
Can you check that the following configuration is found on the Jeddah ASA (Depending on the software level of the ASA the format of the command might change. I'm not 100% sure)
isakmp nat-traversal To enable NAT traversal globally, check that ISAKMP is enabled (you can enable it with the isakmp enable command) in global configuration mode and then use the isakmp nat-traversal command. If you have enabled NAT traversal, you can disable it with the no form of this command.
isakmp nat-traversal natkeepalive
no isakmp nat-traversal natkeepalive
Syntax Description
natkeepalive
Sets the NAT keep alive interval, from 10 to 3600 seconds. The default is 20 seconds.
Defaults
By default, NAT traversal (isakmp nat-traversal) is disabled.
Command Modes
The following table shows the modes in which you can enter the command:
Command Mode
Firewall Mode
Security Context
Routed
Transparent
Single
Multiple
Context
System
Global configuration
Command History
Release
Modification
Preexisting
This command was preexisting.
7.2(1)
This command was deprecated. The crypto isakmp nat-traversal command replaces it.
Usage Guidelines Network Address Translation (NAT), including Port Address Translation (PAT), is used in many networks where IPSec is also used, but there are a number of incompatibilities that prevent IPSec packets from successfully traversing NAT devices. NAT traversal enables ESP packets to pass through one or more NAT devices.
The security appliance supports NAT traversal as described by Version 2 and Version 3 of the IETF "UDP Encapsulation of IPsec Packets" draft, available at http://www.ietf.org/html.charters/ipsec-charter.html, and NAT traversal is supported for both dynamic and static crypto maps.
This command enables NAT-T globally on the security appliance. To disable in a crypto-map entry, use the crypto map set nat-t-disable command.
Examples
The following example, entered in global configuration mode, enables ISAKMP and then enables NAT traversal with an interval of 30 seconds:
hostname(config)# isakmp enable
hostname(config)# isakmp nat-traversal 30
- Jouni

Unable to access Component Controller attributes from Views.

Hi,
I am unable to access the attributes in component controller from methods in View even by using WD_COMP_CONTROLLER.
Say, I want to access the attribute G_FLAG in component controller from a method in the View Controller by the following code :
WD_COMP_CONTROLLER->G_FLAG = 2.
Then an error message is showing up saying - Field G_FLAG is unknown. It is neither in one of the specified tables nor defined by a DATA statement.
What should I do? Plz suggest..

Hi,
Please check the Public check box of the attribute in the component controller.
Hopefully it will solve your problem.
Thanks

I am unable to access my Backup even from Icloud

Please help. It looks like I might have lost everything from my Iphone inculuding all backups

Hello, Indra!! The Tiger.
Thank you for visiting Apple Support Communities.
I would need clarification on what you mean by you are unable to access your Gmail account to better assist you. However, here are the best two articles to go through when experiencing issues with a Gmail account on an iOS device.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Cheers,
Jason H.

Unable to access my iCloud mail from an portal and need in ASAP. How can I access my messages?

At around 9:00P Pacific last night, I received my last email message through iCloud to my [email protected] address. I've tried on my iPad, PC, MacBook Pro and iPhone. I've done a full password reset to be compliant with the newest password standards. I've deleted my iCloud account from my MacBook Pro and iPhone. I've reset network setting on iPhone. Then I tried to log into iCloud.com (should have tried earlier) and I can get to all my applications (calendar, documents, etc.), EXCEPT Mail. I can't find any available route to access my .me mail and need to get to it urgently for travel plans and work documents.
Any suggestions? Please assist if possible.
So far, Apple hasn't been able to help either.
TA

The Apple Support Page, http://www.apple.com/support/icloud/systemstatus/ has the following on the status:
iCloud: Mail & Notes - Users Affected: <1%
01/08/2012 09:43 PST
Users may be unable to access Mail. Service is expected to be restored by 8pm PST today. All messages will be delivered at that time.

I'm unable to access the Itunes Store from my Windows 8?

I recently recieved a new laptop, operating on Windows 8. {Note: This is my first Windows computer, I transferred over from Mac}. I decided to open up a new Apple ID to get away from my parent's account, so that was all set up pretty easily.
Now, however, i find that I can't access the Itunes store from the Itunes application.
A message, I'm unable to find it now, it no longer appears, instead I get a blank screen instead of the store, read something similar to "not being able to open itunes store, please check your cookies and account details. {sorry if that's too vague, but it definitly had to do with my cookie settings making it unable to open.}
I'm at a loss at what to do next. My account is perfectly set up, but where and how to adjust the cookies so that the itunes store can open?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Unable to access my iCloud account from any device?

I am unable to log into my iCloud account through the web and apps on iOS and OS X that's connected to iCloud... Now I'm being disconnected from already logged in apps and is making reenter my password, but even when I do, it gives me an error. On the website all it says is 'iCloud encountered an error while trying to connect to server'. But when I tried using my old iCloud account, it was easily accessible... Can somebody help me out? This is very inconvenient...

The Apple Support Page, http://www.apple.com/support/icloud/systemstatus/ has the following on the status:
iCloud: Mail & Notes - Users Affected: <1%
01/08/2012 09:43 PST
Users may be unable to access Mail. Service is expected to be restored by 8pm PST today. All messages will be delivered at that time.

Unable to access Oracle VM Manager from browser

Hi,
I am unable to access the Oracle VM Manager from my browser at any of the url's e.g. /em; /OVS; /apex
I can connect to my server via putty, so I know the IP address that I am using is correct.
In the /var/ovm-manager/oc4j.log file I get the following message:
ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
The oc4j service is running and the ovs-agent service is running but I cannot connect.
I am new to Oracle VM and Linux for that matter so it is entirely possible that something is not configured correctly somewhere
I'll appreciate it if anyone can assist
Thanks

Try this command from the console or SSH to the server:
service iptables stop
If you can then access the URLs you will need to modify iptables to allow port 8888
I think this is the command:
iptables -I INPUT -p tcp --dport 8888 -j ACCEPT
then:
service iptables start
Then try to connect again.

Unable to access LAN behind RV042 from QUICK VPN Client once it connects

Similar Messages

Maybe you are looking for