Unable to access local resources or RDP over VPN Connection
Dear Tech People.
I have a Windows 7 computer that I have created a VPN service through Windows on. I am able to connect to the VPN from outside of my network with my Macbook Air. However, I am unable to connect to the computer via RDP, nor can I ping my PC that
I am VPN'd into (192.168.1.252). When I am connected, the IP address that I am assigned, is 192.168.1.150. When I run ipconfig /all, I can see the "RAS < Dial In> Interface for VPN, and it is setup with an ip address of 192.168.1.151
with a /32 subnet mask. There is no default gateway listed, which is why I believe that this is not working. I cannot determine any way to make this change.
Basically, I have a VPN connection that I can do nothing with. I cannot access shared resources, nor can I start a remote desktop session. The pass through is setup for PPTP with my router, which I believe is working, as I couldn't even connect
prior to this. Below is the full results of my ipconfig /all command on my Windows PC:
C:\Users\Zach>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Serenity
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : att.net
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.151(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : att.net
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : BC-5F-F4-85-5E-A8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2602:306:ce94:2570:3144:306c:cdae:d615(Pr
eferred)
Temporary IPv6 Address. . . . . . : 2602:306:ce94:2570:bd83:220:80a0:eb1e(Pre
ferred)
Link-local IPv6 Address . . . . . : fe80::3144:306c:cdae:d615%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.252(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, October 26, 2013 7:27:27 PM
Lease Expires . . . . . . . . . . : Thursday, October 31, 2013 7:28:28 AM
Default Gateway . . . . . . . . . : fe80::22e5:64ff:fe0c:5640%11
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 247226356
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-2E-8E-B2-BC-5F-F4-85-5E-A8
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d906:32d3:7108:1227%15(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.18.39(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 335564886
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-2E-8E-B2-BC-5F-F4-85-5E-A8
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::fc76:1de8:a7c3:27dd%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.135.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 352342102
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-2E-8E-B2-BC-5F-F4-85-5E-A8
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.att.net:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : att.net
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{20B8F51C-F852-41EF-9F9B-1D0107550D1E}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{8CCEC9EC-0685-4C6A-A87A-CED27B6C93E5}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Any thoughts or help would be greatly appreciated.
Hi,
I'm so glad you have solved the issue in this way.
And thanks for your sharing, your solution shared here will provie other people in this forum with a great help!
Regards,
Ada Liu
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Dear All,
I am facing a serious problem in BPC 10.0 NW version.
I am using Windows 8.1(64 bit) and Firefox Version 30. And, trying to access BPC 10.0 web over VPN connection.
After establishing VPN connection, I am able to login to BPC web. But, the landing page shows only the Admin link. It is not showing other links to laucnh Excel, Word, Powerpoint. Instead, as usual, There is a button(Install) to Install EPM office addin.
When I clicked the Install button, download just stops immediately, showing the byte size as ZERO. I believe since I have established VPN connection, it is not letting me to go to the Internet to download the EPM office addin. It sounds logical. But, I need to resolve this i.e. I should be able to launch Excel interface from the BPC web(web interface). This issue is eating my time.
I am getting the same result for IE 11.0 and Chrome 35.0 version browser as well.
Pls. note that, I am able to launch Excel DIRECTLY from the machine and establish connection to BPC web and everything works fine here.
Pls. help to resolve this.
Thank you.
Regards,
PeriHi Peri,
I just wanted to know if you resolved the issue since I've been also getting the same issue and it's eating lots of time .. :-(
Could you please share the solution if it's now working fine?
Regards,
Rachal -
"Unable to update local resource group" error
Hello,
I'm having a problem updating one of my local resource groups in RD Gateway Manager.
We're on 2008 R2 SP1, and have a gateway in between us and another company. When a user needs to access their computer in the other company, we add the machine to the local group, and the account the AD RAP group, it works fine.
However, every couple of weeks, it will not allow me to update the local resource group for computers. I receive the error "WMI Failure: Unable to update local resource group" ..and apparently google cannot find another instance of this error happening -
no results at all - very odd. So the normal fix is to just recreate the RAP.xml file, then add the machines in again, but this is not a good enough fix long term, plus it misses the machines that are switch off when i recreate.
Also - this will be logged in eventvwr TerminalServices-Gateway
"The resource group "MY GROUP NAME" could not be updated. The following error occurred: "23106". To resolve this issue, ensure that you have configured resource group settings correctly and set the correct value and permissions for the RAP.xml file and the
RAPStore registry key."
Google also cannot find anything for that error, OR that 23106 error code - I cannot get results no matter what I do. It cannot be permissions as I've checked them, and it works for a bit. I've ran the WMI diagnostics, and they're fine, no different to any
other server in the environment.
I've also checked these forums and there is nothing on there. Does anyone know the relevance of that error code, or where I can check it out?
Cheers,
JonI can confirm ..MPIN..'s solution fixes it.
I had the exact same problem; I'd recently added a new server, and stopped the old server before decomissioning. Adding the new serer to the TS RAP policy server didn't work and generated the OP's error.
I removed the old server name (which was not pingable) and the group COULD be updated.
Really crappy error handling - this is a defect and should be fixed. A proper error would say "Not all machines in this group are valid, please remove the invalid entries" OR simply allow 'ok' without double checking (after all, the names are checked
when adding).
So often we accept shoddy software by proposing work arounds as 'the fix'. The actual fix is to fix the software to be more descriptive and/or handle errors more gracefully.
== John == -
Cannot access local resource file
When I run my application on browser these error comes, I have found to change right click on project>properties>flex build path>libary path> framework linkage to "Merge into code"not working,
I have also changed right click on project> properties>Flex compiler> Additional compiler arguments - -locale en_US to some -network false still its not working
and undid whatever change i made,
Help!
SecurityError: Error #2148: SWF file http://localhost/aamshare-debug/aamshare.swf cannot access local resource file:///C|/wamp/www/aamshare-debug/media/bse.png. Only local-with-filesystem and trusted local SWF files may access local resources.
at flash.display::Loader/_load()
at flash.display::Loader/load()
at mx.controls::SWFLoader/loadContent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\controls\SWFLoader.as:1611]
at mx.controls::SWFLoader/load()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\con trols\SWFLoader.as:1380]
at mx.controls::SWFLoader/initializeHandler()[C:\autobuild\3.2.0\frameworks\projects\framewo rk\src\mx\controls\SWFLoader.as:1971]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9298]
at mx.core::UIComponent/set processedDescriptors()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\core\UICom ponent.as:1217]
at mx.core::UIComponent/initializationComplete()[C:\autobuild\3.2.0\frameworks\projects\fram ework\src\mx\core\UIComponent.as:5395]
at mx.core::UIComponent/initialize()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx \core\UIComponent.as:5379]
at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()[C:\autobuild\3.2.0\frameworks\pro jects\framework\src\mx\core\UIComponent.as:5267]
at mx.core::Container/http://www.adobe.com/2006/flex/mx/internal::childAdded()[C:\autobuild\3.2.0\frameworks\pro jects\framework\src\mx\core\Container.as:3305]
at mx.core::Container/addChildAt()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\c ore\Container.as:2217]
at mx.core::Container/addChild()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\cor e\Container.as:2140]
at mx.core::Container/createComponentFromDescriptor()[C:\autobuild\3.2.0\frameworks\projects \framework\src\mx\core\Container.as:3681]
at mx.core::Container/createComponentsFromDescriptors()[C:\autobuild\3.2.0\frameworks\projec ts\framework\src\mx\core\Container.as:3493]
at mx.containers::ViewStack/instantiateSelectedChild()[C:\autobuild\3.2.0\frameworks\project s\framework\src\mx\containers\ViewStack.as:1140]
at mx.containers::ViewStack/commitProperties()[C:\autobuild\3.2.0\frameworks\projects\framew ork\src\mx\containers\ViewStack.as:664]
at mx.core::UIComponent/validateProperties()[C:\autobuild\3.2.0\frameworks\projects\framewor k\src\mx\core\UIComponent.as:5807]
at mx.managers::LayoutManager/validateProperties()[C:\autobuild\3.2.0\frameworks\projects\fr amework\src\mx\managers\LayoutManager.as:539]
at mx.managers::LayoutManager/doPhasedInstantiation()[C:\autobuild\3.2.0\frameworks\projects \framework\src\mx\managers\LayoutManager.as:659]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/callLaterDispatcher2()[C:\autobuild\3.2.0\frameworks\projects\framew ork\src\mx\core\UIComponent.as:8628]
at mx.core::UIComponent/callLaterDispatcher()[C:\autobuild\3.2.0\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8568]Since you are loading your swf over http, it will be placed in a remote sandbox and will not be able to access the local filesystem. You should load your png in the same way as your swf (ie. over http), or embed it into your application.
-
I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons. -
EJB transaction hanging over VPN connection
EJB transaction hanging over VPN connection
I am trying to diagnose a problem that only occurs when I am doing testing from home and connected via VPN to work.
We are using WL 10.3. Our clusters are setup to communicate via multicast. We have a stateless session bean that uses many different resources (Sybase DB, other EJBs, Sonic JMS). I have a local EJB on my home network that I am testing and it connects with other EJBs and resources on my corporate network. While I don't think it is related to the problem, there is a cluster of the same EJB I am trying to test deployed to my corporate environment. i.e. I am testing ResetService EJB and there is a deployed domain cluster of several ResetService EJBs in the environment I am connecting to. My local server and admin domain are named differently than the one deployed and my local ejb shouldn't try to connect to the cluster in the environment.
When I make a call into my local ejb everything seems to work as expected until it gets to the commit part of the transaction (after my ejb returns). At this point the executing thread hangs at the following location
"[STUCK] ExecuteThread: '16' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=2 tid=0x2e8cb400 nid=0x22fc in Object.wait() [0x3031f000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x091a4b18> (a weblogic.transaction.internal.ServerTransactionImpl)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2130)
- locked <0x091a4b18> (a weblogic.transaction.internal.ServerTransactionImpl)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:266)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
at advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean_shnf9c_EOImpl.resetTradeByRate(ResetTradeServiceBean_shnf9c_EOImpl.java:1921)
at advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean_shnf9c_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)This thread is obviously waiting for a notification from some other thread but it is unclear what exactly it is waiting for. This only seems to happen when I am connected via VPN because when I try this same setup connected directly to my corporate network at work it works fine.
I connected w/ debugger and tried to dig. Some interesting observations I see are.
1) The ServerTransactionImpl object that is hanging has a 'preferredHost' of a different machine on my corporate network. It is an EJB that my service got some information from but it wasn't involved in any create, update, or delete aspects of the tran so in theory it shouldn't be part of it. Does anyone know what exactly this peferredHost attribute is signifying? I also see this same remote ejb server reference defined in a ServerCoordinatorDescriptor variable.
2) I also sometimes see other XA resources (JMS) with this ServerTransactionImpl that point to references of resources that live on other machines on my corporate network (not my local ejb). This doesn't always seem to be the case though.
VPN will definetly block multicast packets from the corporate env back to my machine. I don't think it works from my machine to the corporate env machines either.
I also have two IPs when connected over VPN. One for my local home network and one given to me by my VPN client. I have setup my local WL server to listen on the VPN client provided IP which the corporate machines should be able to resolve and send TCP message over.
This definetly seems to be transaction related because when I remove the tran support from my ejb things work as expected. The problem is I need to test within the transaction just like it runs in a deployed environment so this isn't really a fix.
My theory: My local test WL EJB is waiting for a communication from some other server before it can commit the tran. This communication is blocked due to my VPN connection. I just don't know what exactly it is trying to communicate and how to resolve if that is in fact the problem. I thought about looking into unicast rather than multicast for cluster communication but in my mind that doesn't come into play here because I am not deploying a local cluster for my EJB and I thought multicast was just used for inter-cluster communication.
I also saw some docs talking about resources need to be uniquely named when inter-domain communication is performed (http://docs.oracle.com/cd/E13222_01/wls/docs81/ConsoleHelp/jta.html#1120356).
Anyone have any thoughts on what might be going on?
Here is some log output from my local WL instance:
Servers in this output--
My test Server - AdminServer+10.125.105.14:7001+LJDomain+t3
Server in env I read data from during ejb method call - TradeAccessTS_lkcma00061-1+171.149.24.240:17501+TradeSupportApplication2+t3
Server in env I read data from during ejb method call - MesaService_lkcma00065-1+171.149.24.244:17501+MESAApplication1+t3
Server in env I read data from during ejb method call - DataAccess_lkcma00055-0+171.149.24.234:17500+AdvantageApplication1+t3
Server in env I read data from during ejb method call - DataAccess_lkcma00053-6+171.149.24.232:17506+AdvantageApplication1+t3
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606895> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: ServerTransactionImpl.commit()>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606895> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: TX[BEA1-0005C168CCCC337F43A8] active-->pre_preparing>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606896> <BEA-000000> <SC[LJDomain+AdminServer] active-->pre-preparing>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606896> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: before completion iteration #0>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606896> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: Synchronization[weblogic.ejb.container.internal.TxManager$TxListener@11b0cf9].beforeCompletion()>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606897> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: Synchronization[weblogic.ejb.container.internal.TxManager$TxListener@11b0cf9].beforeCompletion() END>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606898> <BEA-000000> <SC[LJDomain+AdminServer] pre-preparing-->pre-prepared>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606898> <BEA-000000> <SC[TradeSupportApplication2+TradeAccessTS_lkcma00061-1] active-->pre-preparing>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606898> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: delist weblogic.jdbc.wrapper.JTSXAResourceImpl, TMSUSPEND, beforeState=new, startThread=null>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606898> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: delist weblogic.jdbc.wrapper.JTSXAResourceImpl, afterStatenew>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606899> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: sc(TradeAccessTS_lkcma00061-1+171.149.24.240:17501+TradeSupportApplication2+t3+).startPrePrepareAndChain>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606900> <BEA-000000> <SC[TradeSupportApplication2+TradeAccessTS_lkcma00061-1] pre-preparing-->pre-preparing>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606902> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: delist weblogic.jdbc.wrapper.JTSXAResourceImpl, TMSUSPEND, beforeState=new, startThread=null>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606903> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: delist weblogic.jdbc.wrapper.JTSXAResourceImpl, afterStatenew>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTANaming> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606903> <BEA-000000> <SecureAction.runAction Use Subject= <anonymous>for action:sc.startPrePrepareAndChain to t3://171.149.24.240:17501>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278606903> <BEA-000000> <PropagationContext: Peer=null, Version=4>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278606904> <BEA-000000> < +++ otherPeerInfo.getMajor() :: 10>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278606904> <BEA-000000> < +++ otherPeerInfo.getMinor() :: 3>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278606904> <BEA-000000> < +++ otherPeerInfo.getServicePack() :: 1>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278606905> <BEA-000000> < +++ otherPeerInfo.getRollingPatch() :: 0>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278606905> <BEA-000000> < +++ otherPeerInfo.hasTemporaryPatch() :: false>
####<Mar 20, 2012 4:23:26 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-0005C168CCCC337F43A8> <> <1332278606905> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: waitForPrePrepareAcks AdminServer+10.125.105.14:7001+LJDomain+t3+=>pre-prepared TradeAccessTS_lkcma00061-1+171.149.24.240:17501+TradeSupportApplication2+t3+=>pre-preparing MesaService_lkcma00065-1+171.149.24.244:17501+MESAApplication1+t3+=>active DataAccess_lkcma00055-0+171.149.24.234:17500+AdvantageApplication1+t3+=>active DataAccess_lkcma00053-6+171.149.24.232:17506+AdvantageApplication1+t3+=>active>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Then eventually I get timeout errors like below in log
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789379> <BEA-000000> < +++ otherPeerInfo.getMajor() :: 10>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789380> <BEA-000000> < +++ otherPeerInfo.getMinor() :: 3>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789380> <BEA-000000> < +++ otherPeerInfo.getServicePack() :: 1>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789381> <BEA-000000> < +++ otherPeerInfo.getRollingPatch() :: 0>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789382> <BEA-000000> < +++ otherPeerInfo.hasTemporaryPatch() :: false>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789382> <BEA-000000> < +++ Using new Method for reading rollback reason....>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTANaming> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789383> <BEA-000000> <RMI call coming from = TradeSupportApplication2>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTANaming> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789384> <BEA-000000> <SecureAction.stranger Subject used on received call: <anonymous> for action: startRollback AUTHENTICATION UNDETERMINABLE use SecurityInteropMode>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789385> <BEA-000000> <PropagationContext.getTransaction: tx=null>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789385> <BEA-000000> <PropagationContext.getTransaction: xid=BEA1-0005C168CCCC337F43A8, isCoordinator=true, infectCoordinatorFirstTime=false, txProps={weblogic.transaction.name=[EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)], weblogic.jdbc=t3://171.149.24.240:17501}>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789391> <BEA-000000> < +++ looking up class : weblogic.transaction.internal.TimedOutException :: in classloader : java.net.URLClassLoader@15e92d7>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789397> <BEA-000000> < +++ looking up class : weblogic.transaction.TimedOutException :: in classloader : java.net.URLClassLoader@15e92d7>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789398> <BEA-000000> < +++ looking up class : java.lang.Exception :: in classloader : java.net.URLClassLoader@15e92d7>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789398> <BEA-000000> < +++ looking up class : java.lang.Throwable :: in classloader : java.net.URLClassLoader@15e92d7>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789402> <BEA-000000> < +++ looking up class : [Ljava.lang.StackTraceElement; :: in classloader : java.net.URLClassLoader@15e92d7>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789403> <BEA-000000> < +++ looking up class : java.lang.StackTraceElement :: in classloader : java.net.URLClassLoader@15e92d7>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTAPropagate> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789404> <BEA-000000> < +++ converted bytes to rollback reason : weblogic.transaction.internal.TimedOutException: Timed out tx=BEA1-0005C168CCCC337F43A8 after 30000 seconds>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789404> <BEA-000000> <Name=[EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)],Xid=BEA1-0005C168CCCC337F43A8(21880283),Status=Marked rollback. [Reason=weblogic.transaction.internal.TimedOutException: Timed out tx=BEA1-0005C168CCCC337F43A8 after 30000 seconds],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=502,seconds left=29497,activeThread=Thread[[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads],XAServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(ServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(state=new,assigned=none),xar=null,re-Registered = false),SCInfo[LJDomain+AdminServer]=(state=pre-prepared),SCInfo[TradeSupportApplication2+TradeAccessTS_lkcma00061-1]=(state=pre-preparing),SCInfo[MESAApplication1+MesaService_lkcma00065-1]=(state=active),SCInfo[AdvantageApplication1+DataAccess_lkcma00055-0]=(state=active),SCInfo[AdvantageApplication1+DataAccess_lkcma00053-6]=(state=active),properties=({weblogic.transaction.name=[EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)], weblogic.jdbc=t3://171.149.24.240:17501}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=AdminServer+10.125.105.14:7001+LJDomain+t3+, XAResources={LJDomain.AdminServer.JMSXASessionPool.advantage.jms.queue.sonicConnectionFactory, LJDomain.AdminServer.JMSXASessionPool.advantage.jms.topic.sonicConnectionFactory, WLStore_LJDomain__WLS_AdminServer, WSATGatewayRM_AdminServer_LJDomain},NonXAResources={})],CoordinatorURL=AdminServer+10.125.105.14:7001+LJDomain+t3+) wakeUpAfterSeconds(60)>
####<Mar 20, 2012 4:26:29 PM CDT> <Debug> <JTA2PC> <F68B599F56D71> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1332278789406> <BEA-000000> <BEA1-0005C168CCCC337F43A8: [EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]: setProperty: weblogic.transaction.name=[EJB advantage.tradesupport.rates.resets.ejb.ResetTradeServiceBean.resetTradeByRate(java.lang.Long,java.util.Set,java.lang.String,java.lang.String,boolean,advantage.common.service.context.ServiceContext)]>Hello asirigaya,
MSDTC configure does not belong to this forum, this forum topic is "Discuss client application development using Windows Forms controls and features."
I didn't see MSDN has this kind of forum so I will help you move this case to "Where is the forum for"
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have been trying to get my computer (os x.7) to astablish a remote desktop connection to my work computer via a vpn tunnel. In fact I have just discovered that it works fine if i select to "send all traffic over vpn connection" from the options in the advanced setup of the vpn.
If the option is selected microsofts "Remote desktop connection for mac" works just fine. However without selecting the option it is not taking advantage of the tunnel but tries to connect as if the tunnel would not exist.
Now the question is how do I get program to use the vpn tunnel without checking the above option?
Thanks for any hints and pointers.Then can her computer be authorized to both accounts?
Absolutely. You can authorize any given computer to up to five iTunes Store accounts.
If purchases are made on her account, to a computer authorized to my account, can I put those songs on my iPod?
If you connect your iPod to her computer, yes. Tracks download only to the computer from which they're purchased, regardless of which iTunes Store account is used for the purchase. Or you could copy the tracks from her computer to yours and then authorize your computer to her iTunes Store account. But that's sort of defeating the original purpose, it would seem to me.
is it better to buy music through Amazon downloads and/or actually purchasing CDs to avoid the security features iTunes puts on its music?
That's certainly an option. If it's an entire album I want, I buy CDs. That way I can import them at the quality I want and to whichever of my systems I want. Amazon or one of the other download stores that offer tracks as MP3 are also an option, though for me download stores are best when you just want a couple of tracks off a given CD. -
Unable to access local machine after a VPN connection
I have been previously able to control other machine are our network after making a successful VPN connection, until we have to rebuild the server. I have configure everything as before (as I believe), but I am still unable to connect to other local machines. I am able to connect to our xserve and shared drives (via AFP). ARD ports are open as neccessary. thank you
Hi n.dave, and a warm welcome to the forums!
So, I take it all the numbers are faked?
Is the 5th number on the failed on in your Network? -
Hybrid Remote App Unable to Access this resource
I am having a difficult time getting my Hybrid remote app to authenticate properly. Configuration is as follows:
Hybrid Remote App collection with S2S VPN between remote app VNet and Azure VNet following the guide:
http://blogs.msdn.com/b/rds/archive/2014/07/21/how-to-link-azure-remoteapp-to-an-existing-vnet.aspx
Client Server model Application with the Client installed on custom remote app image and server side on azure Vnet along with a cloud DC
DC Syncing with Azure AD using AAD Sync Services and utilizing the mail attribute for AAD Login ID
Remote App deploys successfully and joins to the domain (I can see the computer objects in the specified OU). I am able to publish my apps an assign user access. I am also able login through the azure remote app application and see my published apps.
However once I try to launch the remote app it prompts me once again to login, which I do, then it hangs for a while before erroring out with the following message
"An error occurred while remote desktop connection was accessing this resource. Retry the connection or contact your system administrator."
Since this is a hybrid deployment I am able to login to the session host OS. Whenever I do I am logged in with a temporary profile (I am not sure if this is normal or not). I see very little in the event logs on the session host, nor the DC.
I have verified connectivity between the remote app and the DC through ping both ways. The S2S VPN is up and functioning properly. The session host and the DC have access to other domain resources and the web. I have also seen documentation
on a "'Known Issue" with this error related to large profile disks but this does not apply as I have never been able to successfully launch the app. Any assistance with be greatly appreciated I am at my wits end. Please let me know
if I can add any additional information that would help solve the issue.Hi,
Do you have the User Principal Name (UPN) suffix that you are using configured in your Active Directory? For example, say you use
[email protected] for the initial sign on to Azure RemoteApp, and when you launch an application you also enter
[email protected] in the second authentication prompt. Is
[email protected] a valid UPN in your cloud Active Directory--the AD that is hosted on your DCs?
-TP -
Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our local system from a remote location. A VPN connection is created, but I am unable to access servers in our network. This same functionality works using my colleagues iPhone 4.
Both phones are running iOS 6.1.3. I tried to reset network settings, but still unable to ping servers in our network. This is a feature that our sales team relies heavily on when out of the office. Hoping someone has some suggestions on what is different between the 2 phones.Hi,
Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
Here is an example, share it with you as a reference.
http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
In addition, you can refer to the link below for more solution about this problem.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support -
Unable to access LAN behind RV042 from QUICK VPN Client once it connects
Hi,
Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
What's the problem in configuration? What i have to do?
Thanks
VC GundapaneniHi There.
have a look over here.
http://www.linksysinfo.org/index.php?threads/netbios-issues-with-vpn.16170/ -
Server 2012 Firewall is blocking RDP over VPN
I have a 2012 server running a VPN and I cannot connect to the server itself over RDP when I am connected through the VPN. I can connect without issue though from a machine on the local physical network. The standard RDP firewall exceptions are enabled.
If I turn off the server firewall completely, I can connect with both, so clearly it is a firewall issue, but only with the VPN connections. Turned on logging, and this is what I get. I am not sure why these are different or what adjustment needs to be made
to the firewall, as I don't want to leave the firewall off.
#Version: 1.5
#Software: Microsoft Windows Firewall
#Time Format: Local
#Fields: date time action protocol src-ip dst-ip src-port dst-port size tcpflags tcpsyn tcpack tcpwin icmptype icmpcode info path
2014-07-08 23:01:05 ALLOW TCP 192.168.20.100 192.168.20.125 1242 3389 0 - 0 0 0 - - - RECEIVE
2014-07-08 23:01:26 DROP TCP 192.168.20.200 192.168.20.125 39646 3389 52 S 748485790 0 8192 - - - RECEIVE
The top line is when I RDP from a local machine (20.100), the second line is an RDP from a remote machine while connected over the VPN (20.200).
Matt Kleinwaks - MSMVP MSDN Forums Moderator - www.zerosandtheone.comHi,
Make sure you have enabled all of three Remote Desktop rules in firewall:
Remote Desktop - Shadow(TCP-In)
Remote Desktop - User Mode(TCP-In)
Remote Desktop - User Mode(UDP-In)
Have you checked the detailed setting of the Remote Desktop rules in firewall? Be caution of Scope tab in the properties.
If the issue persists, please enable the auditing of windows firewall events
To enable auditing of Windows Firewall events, please follow the steps below,
Open the Group Policy Object Editor snap-in to edit the Group Policy object (GPO) that is used to manage Group Policy settings in your organization.
Open Computer Configuration, open
Windows Settings, open Security Settings, open
Local Policies, and then click Audit Policy.
Double-click Audit process tracking, select the
Success and Failure check boxes, and then click
OK.
Double-click Audit policy change, select the
Success and Failure check boxes, and then click
OK.
For detailed information, please view the link below,
Enable Auditing of Windows Firewall Events
http://technet.microsoft.com/en-us/library/cc786961(v=ws.10).aspx
Hope this helps.
Steven Lee
TechNet Community Support -
Can't RDP over VPN in metro RDP app
I have a strange issue. I recently purchased a Lenovo Tablet 2 running windows 8.1. My company uses the Cisco 5.0 VPN client. This client doesn't work with Windows 8 so I found a alternative called Shrewsoft which seemed to work well.
My issue is that I can't connect to any computer on my domain when connected to VPN while using the rdp app from metro mode however if I switch to the desktop and launch the rdp app from there I can connect fine. If I am on the local network (not using
VPN) I can connect to computers using the app in metro mode just fine. This is really baffling me. Anyone have any ideas why this might be happening?Hi,
I have tested in my workstation:
1. Set a vpn host.
2. Use Windows 8.1 client to connect to the VPN connection.
3. Try to connect the other PCs in my workstation, it worked fine.
Note, I have no gateway settings and use no VPN client.
I considered that if there is any Gateway settings in your desktop RDP.
Please check this:
If there is any gateway set in your desktop RDP, please open your Store app - Remote desktop -> Swipe to the right corner -> Settings -> Connection settings -> Under Remote desktop gateway, please copy the gateway settings of desktop RDP into
it.
Then check the results.
Also, would you please check the built-in VPN connection in Windows 8.1?
Kate Li
TechNet Community Support -
Slow transfer speed over VPN connection
Hello,
Recently I setup an SSL VPN to connect to my parent's home network. I have some computers there, and want to try to transfer files between my computer and the one at my parent's. Over the VPN connection, I only get 128kb/s. On both ends, they are 15Mbps connections, and can support internal copies of 4 megs/s. I feel like I should get a better speed than that. I looked around, and people suggested changing the MTU. I have changed the MTU around, and not noticed any increase in the network speed over the VPN. Currently the MTU is at 1500. Below is a copy of my running config. Any thing I'm overlooking, or is this speed normal? Sorry, still relatively new to the ASA 5505.
ASA Version 8.2(5)
hostname HardmanASA
enable password #####
passwd ###### encrypted
names
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 10
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 10
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan10
nameif inside
security-level 100
ip address 192.168.250.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
access-list nat_0 extended permit ip 192.168.250.0 255.255.255.0 192.168.251.0 255.255.255.0
access-list split_tunnel standard permit 192.168.250.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool 192.168.251.100-192.168.251.101 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 0 access-list nat_0
nat (inside) 10 192.168.250.0 255.255.255.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.250.0 255.255.255.0 inside
http 192.168.251.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.250.0 255.255.255.0 inside
ssh 192.168.251.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
management-access inside
dhcpd dns 8.8.8.8
dhcpd address 192.168.250.20-192.168.250.50 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split_tunnel
username ###### password ###### encrypted
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
address-pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
group-alias AnyConnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:74fc2287573841a837e97887840a2d91
: endHi,
Another option is the use of the compression command, this is usually enabled by default but maybe you can enter it due to is not showed in the running config, the command is compression svc.
Note: The command helps when we have low bandwitdh connections, the command reduces the size if the packets, for broadband connections this can decrease regular performance
Regards,
Sent from Cisco Technical Support iPhone App -
Is there a solution for Airprint over VPN connection?
I use a new HP airprint enabled printer in a WIFI network at home. It all works fine that far, the printer is recognized by Airprint feature on both iPhone and iPad..
Furthermore, I have established a VPN connection on my Fritzbox router and setup VPN connection on iPhone and iPad. The VPN connection (IPSec) works without any problem.
Only problem: If I try to print using the VPN connection, no printer is found. I understand it has something to do with Bonjour not working properly over VPN.
But is there any workaround or tweak to make it work somehow?
(Note: I know there is the eprint-feature on the HP printer as well, but I don´t want to use it)
ThanksI am having the same problem. When on my local network, I have 2 AirPrint printers I can print to just fine from iPhone, iPad and iPod. However, while connected to the VPN, it doesn't see any printers.
The VPN is OS X Lion 10.7.5 VPN. It is serving addresses in the same domain and subnet as the main network. However, there is no option for routing control, so I assume routing across the network is somehow limited. Incidentally, one printer is shared from an iMac, the other is a WiFi printer.
When I connect to the VPN with my Macbook Pro, the printers don't show up as online either. However, I can ping other machines on my network, including the Lion Server (I also have a Linux server that is serving DNS and DHCP - I can log into that machine with VNC or SSH no problem).
The only ports I have open on the firewalls are the L2TP and PPTP ports, and the VNC port. But anything with printing should be within the tunnel, and not filtered by the firewall once a virtual circuit is established, right? Is there a way I can have finer control over the VPN settings, like editing a config file or something?
Maybe you are looking for
-
How to import an Quarkxpress 5 file into Indesign CS3
Hello, I am in trouble when trying to open with Indesign CS3 for windows a file created with Quarkxpress 5 for Mac. Do you have any hint? (file attached) thanks for support
-
I'm currently using the iPad 2 to review photos and I also mirror it to an HDTV (via HDMI adapter). Does the "new iPad" output a better picture quality using the same connection method? This is mainly in reference to mirroring and not for watching mo
-
I installed cs6 and it won''t read raw files from my nikon d800. what do I need to install and how
-
InDesign CC not the CC (2014)
Hi, Does anyone have the download link for the InDesign CC not the CC (2014). Somehow, I am unable to download it from my updated Creative Cloud and only have the 2014 version after uninstalling and reinstalling. The other people I work with are usin
-
What is OSStatus error -54? when trying to view my library I get this error
I am not able to view and edit a good portion of my library due to this error