Unable to Access Mac, it gives out black sreen.

I seem to have a little or major problem with My MBP. I don't really know what is up with it. But, everytime I swtich it on, I can't seem to access MacIntosh. Apparently, it only show me a black nothing plain screen. Nothing written, not even a thing. It looks like it is still switch off. What is happening here with my MBP?
Message was edited by: mariaskyla

Try doing a Parameter RAM reset - hold down apple/option/p/r keys at start up and wait for three chimes before releasing the keys.

Similar Messages

Unable to access the objects with out schema as prefix.. can any body help

Hi,
i am using 10g.I have one problem like i unable to get the table access with out mention prefix for that table.
but i created public synonym and gave all grants to all users also. but still i need to mention schema name as prefix otherwise it give the error..
can any body tell me reason and give me solution.
ex: owner:eiis table:eiis_wipstock
connect to: egps schema
in this position if i try with eiis.wipstock it gives error but if i mention like eiis.wiis_wipstock then its working fine.

Pl do not spam the forums with duplicate posts - Unable to access the objects with out schema as prefix.. can any body help

Unable to access Mac side

So I split the drive with bootcamp and now it will only boot to the Windows side. I called Apple Support and we tried holding down all kinds of keys, unplugging and holding power button, using my usb keyboard and mouse, using my wireless apple keyboard, no go.
Any ideas here?
Thank you,
sb

Did you insert your Apple OEM or SL DVD and install Apple setup.exe (Boot Camp) drivers while in Windows?
That would add a control panel to Windows "Boot Camp" to change the default startup OS volume.
It sounds like (you left out what version of windows) that when you installed, you overwrote the entire drive, and maybe didn't select the proper partition.
Most of Apple Support seem clueless when it comes to support for Windows on Mac.
Did you try booting from a DVD again and see what is out there on your hard drive? what systems and partitions are present?
Step #1 (Boot Camp pdf manual and faq) is to backup, so you can just restore to where things were, and redo and go from there.
You can save the pdf and open in Preview from Boot Camp Assistant.
http://www.apple.com/support/bootcamp

Unable to access Mac over network

For some reason I am having problems connecting to my G4 from my Intel iMac. When I go to the Network icon in my sidebar, I get an error message that comes up when attempting to connect to my G4. The proper name for the G4 is G4Drive. This is how I named it in the G4 Sharing prefs. For some reason the old name is still showing up as well (G4hd). Are there some cache files or pref files I should trash, or is there some kind of database that I have to rebuild?
By the way, accessing the G4 from my Dell PC works fine.
Jul 1 20:13:47 iMac automount[209]: Cannot mount URL 'afp://G4Drive.local.' for /Network/My Network/G4Drive (UI not allowed).
Jul 1 20:13:47 iMac automount[209]: Attempt to mount /Network/My Network/G4Drive returned 1 (Operation not permitted)
Jul 1 20:13:47 iMac automount[209]: Cannot mount URL 'afp://G4-Tower.local.' for /Network/My Network/G4 Tower (UI not allowed).
Jul 1 20:13:47 iMac automount[209]: Attempt to mount /Network/My Network/G4 Tower returned 1 (Operation not permitted)
Jul 1 20:13:47 iMac automount[209]: Cannot mount URL 'smb://WORKGROUP;G4HD' for /Network/My Network/G4Hd (UI not allowed).
Jul 1 20:13:47 iMac automount[209]: Attempt to mount /Network/My Network/G4Hd returned 1 (Operation not permitted)
Jul 1 20:15:12 iMac kernel[0]: AFP_VFS afpfs_mount: /Volumes/G4 HD, pid 749
Jul 1 20:15:13 iMac kernel[0]: AFP_VFS afpfs_Reconnect: doing reconnect on /Volumes/G4 HD
Jul 1 20:15:13 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
Jul 1 20:15:13 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
Jul 1 20:15:19 iMac kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA retry for /Volumes/G4 HD delayCnt 6
Jul 1 20:15:19 iMac KernelEventAgent[32]: tid 00000000 received VQ_NOTRESP event (1)
Jul 1 20:15:19 iMac KernelEventAgent[32]: tid 00000000 type 'afpfs', mounted on '/Volumes/G4 HD', from 'afp_3XUpkQ000dAH0000oM0000VU-1.2e00000b', not responding
Jul 1 20:15:19 iMac KernelEventAgent[32]: tid 00000000 found 1 filesystem(s) with problem(s)
Jul 1 20:15:23 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
Jul 1 20:15:23 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
Jul 1 20:15:33 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
Jul 1 20:15:33 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
Jul 1 20:15:43 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
Jul 1 20:15:43 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
Jul 1 20:15:53 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
Jul 1 20:15:53 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
Jul 1 20:15:55 iMac KernelEventAgent[32]: tid 00000000 unmounting 1 filesystems
Jul 1 20:15:56 iMac kernel[0]: AFP_VFS afpfs_unmount: /Volumes/G4 HD, flags 524288, pid 32

Two things that might work/help...
#1 In Finder>Preferences>Sidebar, toggle the Show Network Icon" OFF, then reboot and turn it back on.
#2 In Finder do a CMD+k, type in afp://ip.of.g4.num
(assuming Personal File Sharing is on as well as Windows Sharing on the G4)

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know). What gives? It works fine when the PC is off.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of). What gives? When the PC is turned off, everything is totally fine. I\m stumped.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
I suspect a problem with your router. Try changing the security. First use no security as a test.
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Is there a way for end users to give their manager access to change their Out of Office, without an admin involved?

Our end users need to be able to give their managers access to enable their out of office.
question 1. Can this be done without giving them full access?
question 2. If they need full access, can the end user themselves give this access? (I've tried giving another user "owner" rights, but the user still can't seem to open my calendar from OWA to adjust my out of office)
question 3. Can this be done without an Sys Admin being involved?

You can create a RBAC role for each manager scoped to each of their employees that lets them run the Set-MailboxAutoReplyConfiguration cmdlet on the exchange server. Otherwise they will need full access to the users mailbox which an admin would have
to grant, the end user can not grant this permission. Then they can open the other users mailbox in OWA and set the OOF
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Unable to access my other macs in the airport network

Since I have installed Leopard 10.5.1 I am unable to access my other MACs in my airpot network for file sharing. Interesting that I can accesss my older IMAC which has TIGER 10.4.11 installed. This bug is new since I updated to 10.5.1. Its funny but "screensharing" on the other hand is working.
(I checked all possibilities in the firewall setting. (File sharing) is allowed on all MACs.
Anyone with a solution or having the same problem
Tony

Ok, they didn't post the link to my screen cap.
Here is the link to the screen cap of my problem in FireFo:.
http://i88.photobucket.com/albums/k196/ajax6677/more.png
Here is how it looks when loaded properly in IE:
http://i88.photobucket.com/albums/k196/ajax6677/more2.png
They are also attached below/

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

Player on WD2 Black (Dual Drive) unable to access 2nd partition

Host OS : Win 7 Pro (x64)
Guest OS: XP Pro (x86)
I had a regular (mechanical) 500 GB hard drive (2 partitions OS and DATA) with W7P (x64) and VM Player 3.x running XPP for years with no problem.
I could access the 2nd partition through the Guest OS and modify/save files etc on it.
I just got a new WD2 Black Dual Drive (120GB SSD and 1TB mechanical in one unit) so technically there are 2 partitions on the drive.
I copied the entire Player (data) folder from the old drive to the new. I installed the same version of Player 3.x and tried to access the Guest OS - I am able to access it but unable to access network or usb drives (keep getting errors as it boots up also) etc.
So I started from scratch on new drive - installed vmplayer 3.x (even tried every version upto v 7.1.0) and installed Guest OS (XPP) again and now I am able to access the network and usb drives etc.
But when I add the 2nd partition in the settings and start the player I get an error that it cannot start because it cannot power up the scsi (2nd partition) drive and it shuts down.
If I remove the 2nd partition from settings it boots up fine.
I am able to access the 2nd partition in W7P with no problems.
In the Guest OS I am not able to access the 2nd partition.
I called WD Support and they said to call VMWARE support and the problem has nothing to do with the physical drive.
I have updated all the VMware tools (as recommended) but still not able to access the 2nd partition.
In W7P I had to install a "driver" software to access the 2nd partition. I tried to install the same thing in the Guest OS (XPP) it starts to install and then comes back and says it cannot see the 2nd partition.
Any help in this would be greatly appreciated as I would like to keep all the documents/data on the 2nd partition and be able to access the same from both the HOST and GUEST OS's without having to create duplicates or transfer them back and forth between the two.

OK FaiyazR, I think I see your core question.
When you first create a VM the only "disk" it knows is the virtual one.
If you want to access the physical disk or just specific files on the physical disk, you will have to set up a "Shared Folder". Here is one way to do it:
While in VM Player:
Go to the "Player" button(screen upper-left)
Select "Manage"
Select "Virtual Machine Settings"
In the popup window select "Options"
In the "Options" menu select "Shared Folders"
Click enabled
Click "Map as a network drive in Windows guests"
Click the "Add..." button which brings up the Shared Folder Wizard
Enter the "Host Path" to the partition (or folder) you wish to share. Repeat for next partition (or folder).
Hope this helps.

I have mac 10.6.8 and safari 5.1.10. on checking help website i am told latest flash player 16.0.0.305 is already installed BUT is not listed in my applications and unable to access sites requiring flash player. can anyone help?

i have mac 10.6.8 and safari 5.1.10. on checking help website i am told latest flash player 16.0.0.305 is already installed BUT does not appear on my list of applications and am unable to access websites requiring it. have also downloaded flash player installer app but unable to download the flash player itself. can anyone help? thank you!

Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria

How do I access compacted mail on a Mac version 10.5.8 stuck with Thunderbird version 16.0.2 ? I am unable to access needed documentation for Taxes, etc

How do I access compacted mail on a Mac version 10.5.8 stuck with Thunderbird version 16.0.2 ? I am unable to access needed documentation for Taxes, etc

Where in the world did you read Deleting All My Mail? I have reread my answer several times and cannot seem to find that in there.
When you mark a message for deletion it does just that. It marks it for deletion and hides the message. It is not truly deleted until you compact.
My point is that unless you deleted your important mail they should still be there somewhere.
Your question was about compacting and thinking it put your messages in a nice little box for safe keeping and now you want to open it.
I have to agree that Thunderbird did a horrible job of naming this process because most are like you and do not understand what it actually does. I included the link to the explanation of what compacting means in the Thunderbird world.
Your messages may still be available to your but finding them has nothing to do with compacting.
Thunderbird does not archive anything unless you use that process by selecting the message and pressing a. You have the option to setup where you want that archive to go and what folders to make.
The All Mail folder is a goofy gmail arrangement. If you have problems with that then you need to address that with Google.
If you go into your gmail account on the gmail site do you see the messages you are hunting in the All Mail folder there?

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

Mac pro cinema display cuts out and can't access Mac with screen sharing

Hi
A weird thing has started happening to my Mac Pro today. After using it for a few minutes the cinema display it is attached to on the Mac Pro just goes black. The Mac Pro is clearly still on - the light is on and i can hear the fans. The Mac Pro shows up on my local network and i can connect to it and access files from my Macbook, but screen sharing doesn't work (i just get the message 'contacting mac pro' and nothing else) and i can't connect to shared iTunes library either, which makes me think it is not just a display issue. I cannot wake the computer with the mouse or keyboard, which makes me think it isn't just a sleep issue. All i can do is physically turn the Mac Pro off, start it up and it will start up successfully and then work for a few more minutes before i get the same problem. I have reset the PRAM and SMC and still have the same problems. Can anyone suggest anything else i can try?
I should mention that i have another problem with the Mac Pro in that it has been spontaneously waking up from sleep and starting up from shutdown, and i still haven't resolved this. I don't know if it is connected to the above issue.
thanks
nick

I have experienced almost the exact same thing with my new 2008 Mac Pro and my 30" Apple display. It has happened to me twice in the last few weeks. The first time I chalked it up to a fluke, but now that it's happened again I searched the forums. In both cases I've had music playing in iTunes which continues playing, goes on to the next track, and so on. So the machine has not crashed in full. I too can connect to the files via another computer on the network, but cannot share the screen.
I have not had the sleep issues you have had.
I'll look at the link you provided in your next post to see where that gets me, but I wanted to let you know you were not alone on this one.

Im only starting and cant work out how to give a black and white photo blue eyes

im a beginer and cant figer out how to give a black and white portrat photo blue eyes

- If the original is B&W first change the picture's mode to color. In my PSE version with is done by Image > Mode > RGB Color.
- Add a blank layer and set it's Blend Mode to Overlay or Color.
- Activate the Brush tool, choose a dark blue color, and paint the eyes. If the result is too dark lower the layer's Opacity. Use the Eraser to remove excess color around the eyes.

An unknown error occurred (0x80092013) what the **** is going on from last six month i am unable to access i tune store?pls give me solution which should help me to shortout this problem as soon as possible

An unknown error occurred (0x80092013) what the **** is going on from last six month i am unable to access i tune store?pls give me solution which should help me to shortout this problem as soon as possible. i have not expected this from apple

I have been trying for months to put iTunes on my laptop and kept getting installation errors in Windows 7. I gave up and just installed iTunes on my PC running XP.
Now I have to install Quicktime on the laptop and once again I get an installation error 0x800736FD.
All windows updates are fine, none failed.
I have removed all apple software from my laptop using CCleaner, common files and folders. Tried reinstalling and still the same error.
Could you offer any advice on how to get both quicktime and then iTunes working??
Thank you in advance

Unable to Access Mac, it gives out black sreen.

Similar Messages

Maybe you are looking for