Unable to Access Menu in SFP Layout tab

Hi,
Could someone please help me? In transaction SFP, under the Layout tab, I'm unable to access the Menu (Edit, View, Insert, Layout, Tools, Palletes, Help). Is there any setting which I've missed out?
Just in case this information is important, my machine is installed with Adobe Reader 7.0.8 and Adobe Lifecycle Designer 7.0.
Also, if the users that will be using ESS/MSS can only have Adobe Reader 6.0 on their machines, I understand that there would be problems trying to display the PCR within the portal. Is there any fix to this?
Appreciate your help and thanking you in advance.
Regards,
Adeline.

Hi Adeline,
1) Can you see the Menu? Or is everything greyed out?
2) Adobe Reader 7.0.8 is suggested to use for the end users. We had a lot of problems with older releases. Please note that in case of Netweaver 2004 you cannot use Reader 8 or higher yet. Adobe and SAP are working on this issue. (The ACF - Active Component Framework) cannot install properly with Reader 8.
So the only fix is using Reader 7.0.8. - The problem is client side related, not ADS or PCR related.
Cheers,
Noë

Similar Messages

  • Only getting french unable to access menu to change back to english

    only getting french on opening apple tv unable to access menu ? to change back to english

    Hi Adeline,
    1) Can you see the Menu? Or is everything greyed out?
    2) Adobe Reader 7.0.8 is suggested to use for the end users. We had a lot of problems with older releases. Please note that in case of Netweaver 2004 you cannot use Reader 8 or higher yet. Adobe and SAP are working on this issue. (The ACF - Active Component Framework) cannot install properly with Reader 8.
    So the only fix is using Reader 7.0.8. - The problem is client side related, not ADS or PCR related.
    Cheers,
    Noë

  • Newbie Question - Error in Transaction SFP - Layout Tab

    Hi All,
    When I go to the "Layout" tab in transaction SFP, I get the following message:
    "Error occurred in communication with layout editor"
    Have my BASIS department forgotten to install something, or is there some config required in SPRO?
    Thanks,
    Tristan

    Hi Pavan,
    It wasn't installed on my PC.  I have the Netweaver Developer Studio CD, with which I can install the Adobe Designer, but when I try to do that it asks for the path to my Java SDK directory.
    I know this is a stupid question, but is the SDK something I also need to install on my PC, or something that needs to be installed on our SAP server?
    Thanks,
    Tristan

  • Unable to access menu or scroll

    Hi.. im unable to access  accessability bar under general category and unable to scroll for the menu contents under each category...i use apple ipod touch 3rd generation pls help me:(

    Hi Adeline,
    1) Can you see the Menu? Or is everything greyed out?
    2) Adobe Reader 7.0.8 is suggested to use for the end users. We had a lot of problems with older releases. Please note that in case of Netweaver 2004 you cannot use Reader 8 or higher yet. Adobe and SAP are working on this issue. (The ACF - Active Component Framework) cannot install properly with Reader 8.
    So the only fix is using Reader 7.0.8. - The problem is client side related, not ADS or PCR related.
    Cheers,
    Noë

  • Unable to access menu

    I'm unable to open the menu! After restarting i can access the menu and after 1 day again the same issue! Have to restart repeatedly! Please can anyone tell me what can I do?

    which device?
    what firmware on the device?
    any applications installed?
    If this post helped... Add some kudos!!

  • Missing LiveCycle menu in SFP after install of ALD 9.0

    Hi,
    My computer was recently reimaged to Windows 7. I installed ALD 9.0. If I open the standalone Form Designer application it is fine, but in SFP (Layout tab), the LiveCycle menu is completely missing!  This means that in SFP I have no access to many features of ALD. Others in my organization have installed it similarly with no problems (same versions of Windows and ALD), and we havn't been able to determine what's different about my system. I have tried a few ideas I've found, such as changing my Windows display settings, but no luck so far.
    My desktop support and Basis people are looking into this, but I was wondering if anyone here had experienced a similar problem, and if so, how did you solve it?
    Thanks,
    Margaret

    Hi Ralph,
    It isn't solved yet here, but I have a workaround, so I haven't been actively chasing it. The following workaround works in ALD 9.0; I'm not sure if it works in 8.2. (9.0 is available from SAP in the downloads area.)
    The workaround is this: if you create or maintain a form, it will work. It's not corrupted in any way. The problem is if you need a palette that isn't displayed. If it isn't accessible via a context menu, what can you do? I solved this by opening the Form Designer as a standalone application (you should have a shortcut icon on your desktop, or look under Programs in your computer), and looking at the menus there (the menus work in the standalone version), and getting the hotkey combinations for the menu items that I need. Unfortunately not all items have hotkey combinations, but all the ones I've needed so far do. Then close the standalone, go back into SAP and open the layout in SFP, and use the hotkeys to open whatever palette you need.
    Finally, to get the form properties page, you can: select an object on your form; go to the Value tab in the object palette; there is a link labeled "Form Level Validation Settings...". This link will open the properties dialog, and you can set target version and other properties there.
    I hope this helps. But I sure hope someone comes along with a real solution - this workaround will let you work on a form, but it's kind of a pain!
    Margaret

  • Access the Attributes and Actions tabs in AME

    Hi All,
    I am trying to setup the approval process using 'Oracle Approval management'. But I am unable to access the Attributes and Actions tabs in the application.
    Can someone help me how to resolve this issue ? Is there any profile option or setups to be done ?
    Regards
    Jhansi

    Are you on 11.5.10?
    Which responsibility you are using?
    On 11.5.10 try with AME Application Administrator responsibility.

  • Error switching to PDF Layout Tab in txn SFP

    For any ADOBE PDF form, if I switch to the layout tab
    I get the following errors
    > Error while generating document
    > Memory Protection Fault in OLE Container Control
    I'm running SAPGUI 6.4
    The SAP Server is WAS 6.4
    I have Acrobat Reader 7.0.2 loaded on my system.
    This problem seems specific to my desktop. Others can view the layout of the PDF without issue.
    Any suggestions?
    Regards,
    Lavaughn

    Hi,
    I too experienced similar problems recently -  used to get errors like SOFFICEINTEGRATION143, SOFFICEINTEGRATION141 & SOFFICEINTEGRATION101(Memory protection error for OLE Container) while accessing Layout of Interactive Forms.
    I got it resolved by uninstalling the NWDS (which uninstalls Adobe LiveCycle Designer (ALD) as well) and then reinstalling ALD and NWDS (Optional).
    With the NWDS installation, ALD is also bundled.
    If you need to install ALD separately, you may get the right ALD version from
    SAP Support Portal->Downloads-> Entry by Application Group->
    Support Packages and Patches-> SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 7.0-> Entry by Component-> Frontend  =>> ADOBE LIVECYCLE DESIGNER 8.0 -> #OS independent.
    Hope this helps.
    George Mathew

  • I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown. Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching f

    I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
    Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
    Prior to updating to iOs 6.3.1 my system worked perfectly.
    Can anybody help please.

    1. Turn off router for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls

    Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts using the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls tab. Has anyone a fix for this problem? If you want to try it out, do the following?
    Dial a number from your iPhone Keypad. After cutting the call, try to save the number you just dialled to your contacts by choosing the new contact option. You will see that you will not be able to key in the name of your new contact.

    Works fine for me.
    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Layout tab msg: 510 bytes transmitted, code page 0000 Message no. FES032

    Hi Guys,
                   Whenever I click on the layout tab in SFP getting the following msg at the msg bar.
    510 bytes transmitted, code page 0000
    Message no. FES032
    and also preview tab is not there.. its also disabled in View menu.
    Anyone come aross similar issue ?

    Hi.. I am trying to answer questions as well..
       Its probably SAP GUI issue..
    Is it something mandatory I have get points to ask questions here.. !!
    Cheers

  • Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

    I'm unable to access content on my iPod Classic while it is connected to iTunes.
    The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
    I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!! 
    I just downloaded the iTunes program.
    Very confused, pleaseee help ...

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Lenovo G50-30 Unable to access BIOS settings after Windows recovery

    Hi
    I recently 'downgraded' a recently purchased Lenovo G50-30 with preinstalled Windows 8.1 to Windows 7 using a UEFI USB install on a GPT partition. I also updated the BIOS from A7CN40WW to the latest A7CN43WW and all was working fine. However, after performing a necessary restore of an system image created using the Windows 7 backup and restore tool, I am suddenly unable to access the BIOS settings, either with the novo button (I do get the menu to select BIOS) or with Fn +F2. All that happens is that I receive a blank screen with a static cursor in the upper left corner. I can however still access the boot menu Fn +F12. This is a particular pain as I obviousl can't select USB 3.0 in BIOS.
    Any help here would be greatly appreciated.

    OK, I managed to clear CMOS by disassembling and desoldering a leg off the the RTC battery but to no avail. The problem seems to be that BIOS a7cn43ww itself has somehow been corupted. In theory this should be able to be resolved by a reflash. The trouble here is there seems to be no way to reflash with a current or previous BIOS version, so I'll have to either wait for a newer version or someone may know better.
    C'mon Lenovo support this simply isn't good enough. It's a brand new laptop and I'm considering returning it for a refund.

  • I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • Player on WD2 Black (Dual Drive) unable to access 2nd partition

    Host OS : Win 7 Pro (x64)
    Guest OS: XP Pro (x86)
    I had a regular (mechanical) 500 GB hard drive (2 partitions OS and DATA) with W7P (x64) and VM Player 3.x running XPP for years with no problem.
    I could access the 2nd partition through the Guest OS and modify/save files etc on it.
    I just got a new WD2 Black Dual Drive (120GB SSD and 1TB mechanical in one unit) so technically there are 2 partitions on the drive.
    I copied the entire Player (data) folder from the old drive to the new. I installed the same version of Player 3.x and tried to access the Guest OS - I am able to access it but unable to access network or usb drives (keep getting errors as it boots up also) etc.
    So I started from scratch on new drive - installed vmplayer 3.x (even tried every version upto v 7.1.0) and installed Guest OS (XPP) again and now I am able to access the network and usb drives etc.
    But when I add the 2nd partition in the settings and start the player I get an error that it cannot start because it cannot power up the scsi (2nd partition) drive and it shuts down.
    If I remove the 2nd partition from settings it boots up fine.
    I am able to access the 2nd partition in W7P with no problems.
    In the Guest OS I am not able to access the 2nd partition.
    I called WD Support and they said to call VMWARE support and the problem has nothing to do with the physical drive.
    I have updated all the VMware tools (as recommended) but still not able to access the 2nd partition.
    In W7P I had to install a "driver" software to access the 2nd partition. I tried to install the same thing in the Guest OS (XPP) it starts to install and then comes back and says it cannot see the 2nd partition.
    Any help in this would be greatly appreciated as I would like to keep all the documents/data on the 2nd partition and be able to access the same from both the HOST and GUEST OS's without having to create duplicates or transfer them back and forth between the two.

    OK FaiyazR, I think I see your core question.
    When you first create a VM the only "disk" it knows is the virtual one.
    If you want to access the physical disk or just specific files on the physical disk, you will have to set up a "Shared Folder". Here is one way to do it:
    While in VM Player:
    Go to the "Player" button(screen upper-left)
    Select "Manage"
    Select "Virtual Machine Settings"
    In the popup window select "Options"
    In the "Options" menu select "Shared Folders"
    Click enabled
    Click "Map as a network drive in Windows guests"
    Click the "Add..." button which brings up the Shared Folder Wizard
    Enter the "Host Path" to the partition (or folder) you wish to share. Repeat for next partition (or folder).
    Hope this helps.

Maybe you are looking for