Unable to access nokia account from my 5800

I cannot access nokia account from my 5800 even though i have an account registered with nokia

hi mate,
have you checked that you have the correct network data settings from your network carrier, and that your data plan is activated? also check the condition of your SIM card. also check that everything is correct on your details of your Nokia Account at http://account.nokia.com

Similar Messages

  • I can't log onto my Nokia Account from my 5800 pho...

    I only made a Nokia Account recently and I can access it fine from my PC but when I try to access it through ovi maps on my Nokia 5800 phone, I just get the message:
    Connection failed. Try again later.
    I've tried and tried again and it doesn't work.
    Can anybody help?
    Cheers.
    J

    Hi, you may need to check your internet settings. Take a look at this post for more help:
    /t5/Nseries-and-S60-Smartphones/5800-Ovi-map-problems/m-p/688038#M209237
    Hope it helps!

  • I'm unable to access multiple accounts from one computer on Apple TV.

    I have an imac running OSX (10.5.8). There are three accounts on the computer, and each one is connected to Home Sharing using the same account.
    Whenever I try to access the files on accounts (other than the first one signed on), I get a message saying that it cannot access the library. However, each account is signed on with their itunes open. The first account to sign on when the computer is started-up never has an issue. It's each other account.
    Does anybody have any information regarding this? I'm really at a loss for what to do.

    Welcome to the Apple Community.
    I don't have any problems doing the same thing, do they share content, are they all using admin accounts.

  • Cannot access my nokia account from settings

    I cannot get into my Nokia account from my settings. Have had problems with downloading apps with an error code and thought it could be resolved by setting up a Nokia account and possibly linking it to Facebook.

    Hi shhh123,
    Welcome to the Nokia Support Discussions!
    May we know your phone model and the exact error message you are receiving when downloading apps? Which internet connection are you using? It would help if you can provide more information, so that we can have a better understanding of your concern.

  • TS3297 I keep trying to purchase something in the iStore but it comes up with "Your account is temporarily unavailable"  "Store unable to access my account info"  But I have checked my account info and everything is up to date.

    I keep trying to purchase something in the iTunes Store but it comes up with "Your account is temporarily unavailable"  "Store unable to access my account info"  But I have checked my account info and everything is up to date. 
    I have some money from a card still on my account that I would like to use.

    This has been an issue with some users for close to 24 hours now. I've been getting the error for the last 5 or so hours myself.
    Having problems is understandable, it happens. and if this is related to the iCloud hack reported yesterday it is good to know Apple is trying to fix the issue.
    But it sure would be nice if there was an official statement from Apple concerning this.

  • Can't access hotmail account from browser. cerficiate untrusted

    Can't access hotmail account from browsing, I tried to log into my hotmail account by visiting www.live.com and log into my account (add e-mail address and password) when sign in i get a message saying:There was a problem establishing asecure connection.( I get two tabs Details and Stop) I click on Detials I get another message saying: server Certificate Error. untrusted certificate,unable to determine the certificate origin, This has been disallowed by your administrator.. When i press on option Stop i get e message saying: refussing connection.This server has beed previously supporting HTTP Strict Transport Security. Due to SSL certificate warning/errors, a connection will not be made. Please could anybody help me.. I contact Vodafone they said it's microsoft issue then the latter said it's blackberry problem. i have tried everything nothing seems to work.. I don't want to register my hotmail account on my BB, but i want to access it through browsing as i do on my PC.. I will be really gratful.. thank you
    Solved!
    Go to Solution.

    Ggggrrrr, i really hope that's wrong, i would also be moving away from BB sharpish if that's the case. Hoping someone cleverer than me can come up with a solution, the BB manual certainly doesn't help. Like the first poster I have tried getting vodafone to help and also hotmail, both without success.

  • Unable to access the data from Data Management Gateway: Query timeout expired

    Hi,
    Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
    1. The gateway is in running status.
    2. Data source is also in ready status and test connection worked fine too.
    3. Below is the error in System Health -
    Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.        
    Error code: 4025
    4. Below is the error in Event Viewer.
    Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
    5. This is the correlational id for latest refresh failure
    is
    f9030dd8-af4c-4225-8674-50ce85a770d0
    6.
    Refresh History error is –
    Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
    managed IDataReader interface was being used: Query timeout expired. 
    Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
    Thanks,
    Richa

    Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
    Thanks.

  • ICloud backup is unable to access the account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete my account?

    iCloud backup is unable to access my account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete or edit my iCloud account?

    You can eirther I think go on ITunes or if you can get to settings you would just go to iCloud.

  • IPad2 is locked because of error message "iCloud Backup is unable to access the account. Review your account information in Settings."

    I changed my AppleID password and now my iPad2 is locked with a message... "iCloud Backup is unable to access the account. Review your account information in Settings."     It will not allow me to unlock the device or go to settings or ignore the message.   Suggestions?
    <Email Edited by Host>

    I have the exact same problem. I have since gone into iCloud via my PC to reset my iCloud password, but did not help. Can someone pls help!!!!!!!!!!!

  • UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION

    Dear All,
    I have a site-to-site connection  from point A to point B. From point B i am unable to access the internet from local internet provider.
    I am trying to ping from 192.168.20.1 the dns 8.8.8.8   but i receive the  message "destination net unreachable".
    When i run "show ip nat translation" i receive nothing.
    The vpn connection is working properly, i can ping the other side 192.168.10/24
    Below is the configuration of the cisco router on point B.
    dot11 syslog
    ip source-route
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.21.254
    ip dhcp pool voice
     network 192.168.21.0 255.255.255.0
     default-router 192.168.21.254 
     option 150 ip 192.168.5.10 
    ip cef
    ip domain name neocleous.ru
    ip inspect name IOS_FIREWALL tcp
    ip inspect name IOS_FIREWALL udp
    ip inspect name IOS_FIREWALL icmp
    ip inspect name IOS_FIREWALL h323
    ip inspect name IOS_FIREWALL http
    ip inspect name IOS_FIREWALL https
    ip inspect name IOS_FIREWALL skinny
    ip inspect name IOS_FIREWALL sip
    no ipv6 cef
    multilink bundle-name authenticated
    vty-async
    isdn switch-type primary-net5
    redundancy
    crypto isakmp policy 5
     hash md5
     authentication pre-share
     group 2
    crypto isakmp policy 10
     encr aes
     authentication pre-share
     group 2
     lifetime 28800
    crypto isakmp policy 50
     encr 3des
     hash md5
     authentication pre-share
     group 2
    crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
    crypto isakmp invalid-spi-recovery
    crypto isakmp keepalive 10
    crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac 
    crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac 
    crypto ipsec df-bit clear
    crypto map CryptoMAP1 ipsec-isakmp 
     set peer [ip address]
     set transform-set TRANSET 
     match address CryptoACL
    interface FastEthernet0/0
     description Primary Provider
     ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
     ip access-group outside_acl in
     ip mtu 1390
     ip nat outside
     ip virtual-reassembly in
     load-interval 30
     duplex auto
     speed auto
     crypto map CryptoCY
     crypto ipsec df-bit clear
    interface FastEthernet0/1
     description TO LAN
     no ip address
     load-interval 30
     speed 100
     full-duplex
    interface FastEthernet0/1.1
     description DATA VLAN
     encapsulation dot1Q 20
     ip address 192.168.20.254 255.255.255.0
     ip access-group inside_acl in
     ip nat inside
     ip inspect IOS_FIREWALL in
     ip virtual-reassembly in
     ip tcp adjust-mss 1379
    interface FastEthernet0/1.2
     description VOICE VLAN
     encapsulation dot1Q 21
     ip address 192.168.21.254 255.255.255.0
    interface Serial0/2/0:15
     no ip address
     encapsulation hdlc
     isdn switch-type primary-net5
     isdn incoming-voice voice
     no cdp enable
    interface FastEthernet0/3/0
     no ip address
     ip access-group outside_acl in
     ip nat outside
     ip virtual-reassembly in
     shutdown
     duplex auto
     speed auto
     crypto map CryptoCY
    ip local pool VPNPool 192.168.23.2 192.168.23.10
    ip forward-protocol nd
    ip http server
    no ip http secure-server
    ip nat inside source list nat_list interface FastEthernet0/3/0 overload
    ip route 0.0.0.0 0.0.0.0 [default gateway ip]
    ip access-list standard VTY
      permit 192.168.20.0 0.0.0.255
    ip access-list extended CryptoACL
     permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
     permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
     permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
     permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
     permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
     permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
     permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
     permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
     permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
    ip access-list extended DFBIT_acl
     permit tcp any any
    ip access-list extended inside_acl
     permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
     permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
     permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
     permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
     permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
     permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
     permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
     permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
     permit ip host 192.168.20.253 host 192.168.3.21
     permit ip host 192.168.20.254 host 192.168.3.21
     permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
     permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
    ip access-list extended nat_list
     deny   ip host 192.168.20.254 192.168.10.0 0.0.0.255
     deny   ip host 192.168.20.254 192.168.3.0 0.0.0.255
     deny   ip host 192.168.20.1 192.168.3.0 0.0.0.255
     deny   ip host 192.168.20.1 192.168.10.0 0.0.0.255
     deny   ip host 192.168.20.2 192.168.3.0 0.0.0.255
     deny   ip host 192.168.20.2 192.168.10.0 0.0.0.255
     permit ip host 192.168.20.1 any
     permit ip host 192.168.20.2 any
     permit ip host 192.168.20.254 any
    ip access-list extended outside_acl
     permit gre any host [ip address]
     permit esp any host [ip address]
     deny   ip any any
    ip sla 2
     icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
     frequency 180
     timeout 500
    ip sla schedule 2 life forever start-time now
    logging 192.168.3.21
    route-map DFBIT_routemap permit 10
     match ip address DFBIT_acl
     set ip df 0
    route-map ISP2 permit 10
     match ip address nat_list
     match interface FastEthernet0/3/0
    route-map nonat permit 10
     match ip address nonat_acl
    route-map ISP1 permit 10
     match ip address nat_list
     match interface FastEthernet0/0

    You cannot access internet, because all traffic is tunneled for VPN !!!!
    Please see cisco tech documentation and bypass traffic for internet.
    eg.  if lan traffic is going from site a to site b  then through vpn
          else
           lan traffic to internet (any) should be out thorugh the vpn .

  • I am unable to access my account after the start up of my pc

    I am unable to access my account after the pc start up even as an administrator. Other account users are able to.

    Passwords are case sensitive and an numeric 0 is often mistaken for an alpha O.  Please verify your entry.
    If unable see here, click the down arrow on the right hand side and select Windows 7
    We are aware that there is a problem with this update concerning the Memphis S motherboard.
     http://windows.microsoft.com/en-us/windows/what-do-forget-windows-password#1TC=windows-7
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • TS1368 When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    I got the same message qhen using iTunes thru my computer. With the same gift card i got the message that the card had already been redeemed.  I tried 3 different brand new cards. All the same. Contact the support is advice I got.

  • Ipad2 icloud backup block is unable to access my account but i cant get it off screen

    my ipad 2 this morning has a block stating icloud backup is unable to access the account...review your information..an d then there is two blocks...one ignore and the other settings...it will not do anything when trying either onef them...but if you click the home button the screen goes to all the apps...what can i do?

    Update your iOS. Go to appleid.apple.com and update pw.
    Reboot ipad by pressing and holding both the home and power buttons for 10-15sec. until the apple logo appears on screen, then let go.

  • I cannot connect to Nokia Account from my Lumia 92...

    I cannot connect to Nokia Account from my lumia 920. I have done a reset which allowed account details set up but although I can get to the sign in page that is as far as it goes. I can however connect via the website from this phone. does anyone have a simple solution.

    Me too facing same problem.Can anyone plz help me.

  • I have two ipod nanos.  And i have 2 itunes accounts and we are accessing both accounts from the same PC.  One of my ipod works fine, it gets detected as a device and sync fine.  The other one does not.  Need help.

    I have two ipod nanos.  And i have 2 itunes accounts and we are accessing both accounts from the same PC.  One of my ipod works fine, it gets detected as a device and sync fine.  The other one does not.  Anyone knows what this may be?

    The music sync is one way - computer to ipod.  The only exception is ituens purchases.  The ipod is not a backup device.
    Copy everything from the old computer or your backup copy of your old computer, to the new one.

Maybe you are looking for

  • Older adobe muse files won't load after update (5.0v)

    Hello, I recently updated Muse to the most recent version (5.0) and now that I go to open my previous files from the earlier version I keep getting this message "You must update to the newest version of Adobe Muse to run this file" or it just crashes

  • Limitations in lightroom trial version

    Perhaps a dumb question, but I just downloaded the LR trial version. I do not see the "File Renaming" menu in the Import module.  I'm watching a tutorial (from Adobe) that is talking about this, but I don't see it.  Is it disabled in the trial versio

  • Inbound Message Fails with Send Exp"

    We are on 10.1.2.0.2 and tryting to test (ebms ) outbound/inbound messaging with a trading partner. The outbound from us to TP works great, but on inbound from the TP we are seing the following errors: (This works on 10.1.2.0.0) Machine Info: (devb2b

  • 2 devices authorised but 'can't authorise more than 5' message appears

    I need to authorise a replacement computer - de-authorised and re-authorised 2 devices but the computer tells me 5 are authorised and you can't de-authorise more than once a year - any ideas?

  • Motion Basic 3D Problem

    I would like to move the x-axis or the anchor point of the basic 3D-filter to the base of an object, enabling the object move around it's base instead of it's center, is this possible? If so, how do I do it? If not, how else can I create this effect?