Unable to access player in tv

When I attempt to play any saved items or a new one in Abobe tv the player appears but is a blank screen.

Hi, if you are still experiencing issues please contact me offlist at [email protected]
Thank you!

Similar Messages

Player on WD2 Black (Dual Drive) unable to access 2nd partition

Host OS : Win 7 Pro (x64)
Guest OS: XP Pro (x86)
I had a regular (mechanical) 500 GB hard drive (2 partitions OS and DATA) with W7P (x64) and VM Player 3.x running XPP for years with no problem.
I could access the 2nd partition through the Guest OS and modify/save files etc on it.
I just got a new WD2 Black Dual Drive (120GB SSD and 1TB mechanical in one unit) so technically there are 2 partitions on the drive.
I copied the entire Player (data) folder from the old drive to the new. I installed the same version of Player 3.x and tried to access the Guest OS - I am able to access it but unable to access network or usb drives (keep getting errors as it boots up also) etc.
So I started from scratch on new drive - installed vmplayer 3.x (even tried every version upto v 7.1.0) and installed Guest OS (XPP) again and now I am able to access the network and usb drives etc.
But when I add the 2nd partition in the settings and start the player I get an error that it cannot start because it cannot power up the scsi (2nd partition) drive and it shuts down.
If I remove the 2nd partition from settings it boots up fine.
I am able to access the 2nd partition in W7P with no problems.
In the Guest OS I am not able to access the 2nd partition.
I called WD Support and they said to call VMWARE support and the problem has nothing to do with the physical drive.
I have updated all the VMware tools (as recommended) but still not able to access the 2nd partition.
In W7P I had to install a "driver" software to access the 2nd partition. I tried to install the same thing in the Guest OS (XPP) it starts to install and then comes back and says it cannot see the 2nd partition.
Any help in this would be greatly appreciated as I would like to keep all the documents/data on the 2nd partition and be able to access the same from both the HOST and GUEST OS's without having to create duplicates or transfer them back and forth between the two.

OK FaiyazR, I think I see your core question.
When you first create a VM the only "disk" it knows is the virtual one.
If you want to access the physical disk or just specific files on the physical disk, you will have to set up a "Shared Folder". Here is one way to do it:
While in VM Player:
Go to the "Player" button(screen upper-left)
Select "Manage"
Select "Virtual Machine Settings"
In the popup window select "Options"
In the "Options" menu select "Shared Folders"
Click enabled
Click "Map as a network drive in Windows guests"
Click the "Add..." button which brings up the Shared Folder Wizard
Enter the "Host Path" to the partition (or folder) you wish to share. Repeat for next partition (or folder).
Hope this helps.

I have mac 10.6.8 and safari 5.1.10. on checking help website i am told latest flash player 16.0.0.305 is already installed BUT is not listed in my applications and unable to access sites requiring flash player. can anyone help?

i have mac 10.6.8 and safari 5.1.10. on checking help website i am told latest flash player 16.0.0.305 is already installed BUT does not appear on my list of applications and am unable to access websites requiring it. have also downloaded flash player installer app but unable to download the flash player itself. can anyone help? thank you!

Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

I am trying to install IOS 8 on my iphone 5 using ITUNES..it says memory full. I am unable to access my phone!

Hello,
I am trying to install IOS8 on my iphone using ITUNES and I am unable to do it. After following the entire process at the end it says that the memory is full and I am automatically disconnected. I am also unable to access my phone, when I turn the phone on it appears a red itunes button together with a charger.
Please help me..
Thank you very much!

Hello,
You'll need to install Flash Player 10.3.183.90, the last version supported for OS X 10.5.8. Download the archive zip file, http://download.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive.z ip, and extract the contents. Then navigate inside the 10_3_r183_90 directory and use the file named flashplayer_10_3r183_90_mac_intel.dmg.
Maria

The follower button on Blogspot no longer works. The icons do not show up, and I am unable to access them. Help!

I use Windows XP, Firefox, AVAST firewall (free). As of a month or more ago, I have been unable to see followers on my blog. There is a gadget button, but no followers listed. I am unable to access followers, though I know how many followers I have and when another follower has joined.
My sister is able to see the icons on her computer. Is there a process by which I can regain access to followers on Blogger? I have contacted them, Google, AVAST--and so far no one has any answers.

Make sure you're downloading the Mac OSX version of Flash Player
http://get.adobe.com/flashplayer/otherversions/
Select Mac OSX, there's only one option for the second drop-down.

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

Unable to access public ip from branch vpn (Cisco ASA 5510 Firewall)

                   Hi,
As per the above diagram
in Head office - able to access public ips
In Branch office - unable to access public ips only accessing head office servers and internet is shared from head office.
please see the below configuration in Branch office router:
access-list 1 permit any
access-list 100 remark ****** Link to Firewall-HO1 ******
access-list 100 permit ip 10.21.211.0 0.0.0.255 172.16.35.0 0.0.0.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 172.16.35.0 0.0.0.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 172.16.35.0 0.0.0.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 host 78.93.190.226
access-list 100 permit ip 10.21.111.0 0.0.0.255 host 78.93.190.226
access-list 100 permit ip any any
access-list 101 deny   ip 10.21.211.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 101 deny   ip 10.21.211.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 101 deny   ip 10.21.211.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 101 deny   ip 10.21.211.0 0.0.0.255 172.0.0.0 0.255.255.255
access-list 101 deny   ip 10.21.111.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 101 deny   ip 10.21.111.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 101 deny   ip 10.21.111.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 101 deny   ip 10.21.111.0 0.0.0.255 172.0.0.0 0.255.255.255
access-list 101 deny   ip 10.21.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 101 deny   ip 10.21.10.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 101 deny   ip 10.21.10.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 101 deny   ip 10.21.10.0 0.0.0.255 172.0.0.0 0.255.255.255
access-list 101 permit ip host 10.21.211.51 any
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 66.147.240.160 eq pop3
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 66.147.240.160 eq smtp
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 78.93.56.10 eq pop3
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 78.93.56.10 eq smtp
access-list 102 permit ip 10.21.211.0 0.0.0.255 any
route-map nonat permit 10
match ip address 101
Thanks for your valuable time and cosiderations

any1 can help me ?

I am unable to access iCloud because my iPhone states that my Apple ID and\or password is incorrect. Based on Apple's own policy my current ID and P/W should be fine to access iCloud. Any suggestions?

I am unable to access iCloud because my iPhone states that my Apple ID and\or password is incorrect. Based on Apple's own policy my current ID and P/W should be fine to access iCloud. Any suggestions?

You will have to contact Apple Care and ask for account security for help. Apple ID: Contacting Apple for help with Apple ID account security

Unable to access applications in workspace,shared services

Hi ,
I am Unable to access applications in workspace and shared services on EPM 11.1.1.3. It happened after normal shutdown/startup scripts were run.
But when I reconfigure the Weblogic web server and run the services again I can access the applications.This is happening frequently now.
Is this anything related to user profiles on the server as we are migrating these to other server.
Can any one help me with this .
Please find the Shared services log below:
<22-Oct-2010 10:25:19 o'clock BST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\bea\weblogic92\platform\lib\p13n\p13n-schemas.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_common.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_system.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_common.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_schemas.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_system.jar;D:\bea\weblogic92\platform\lib\wlp\wsrp-common.jar>
<22-Oct-2010 10:25:21 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia32 from BEA Systems, Inc.>
<22-Oct-2010 10:25:25 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
<22-Oct-2010 10:25:29 o'clock BST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
<22-Oct-2010 10:25:29 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<22-Oct-2010 10:25:30 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Hyperion\deployments\WebLogic9\servers\SharedServices9\logs\SharedServices9.log is opened. All server side log events will be written to this file.>
<22-Oct-2010 10:25:47 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Attempting to verify the database configuration
Attempting to verify the database configuration
Database configuration test passed.
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/deployments/WebLogic9/SharedServices9/config/Domain.xml}
configURL: file:///D:/Hyperion/deployments/WebLogic9/SharedServices9/config/CSS.xml
Done initialize: com.hyperion.css.CSSAPIImpl@283baf
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@27efaa
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@454a3b
CMSOfflineServlet Initialized
Adding audit listener
Shared Services Initialized Successfully
<22-Oct-2010 10:26:56 o'clock BST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<22-Oct-2010 10:26:57 o'clock BST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias hyperion from the jks keystore file D:\hyperion_SSL_Repository\hyperion.jks.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\bea\JROCKI~1\jre\lib\security\cacerts.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.86.57.43:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.87.248.108:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWHYPWEB.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "SharedServices9" for domain "WebLogic9" running in Production Mode>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWWEB026.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<22-Oct-2010 10:27:08 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:28:36 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwdbs026.uk.baa.com - 10.86.41.33 instead of an SSL handshake.>
22-Oct-2010 10:28:38, /files, HEAD, 401 "Unauthorized", 125 ms, %v
22-Oct-2010 10:28:38, /files, HEAD, 200 "OK", 266 ms, %v
22-Oct-2010 10:28:40, /files, HEAD, 401 "Unauthorized", 16 ms, %v
22-Oct-2010 10:28:41, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 200 "OK", 78 ms, %v
<22-Oct-2010 10:29:40 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:30:16 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:32:25 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
22-Oct-2010 10:32:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:43, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 200 "OK", 63 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 200 "OK", 63 ms, %v
<22-Oct-2010 10:32:46 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:34:00 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:35:28 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Populating Application Info
Getting LCM callback info from Registry for product: HUB
LCM Callback: https://LGWWEB026.uk.baa.com:28443/interop/framework/lcm/HSSMigration
Populating Product Info
Thanks in advance
Edited by: 790426 on 25-Oct-2010 06:17

You must first check if you have configured the web server to include the hfm/planning products.
Then you can refer to the thread below:
Not able to see Consolidation Administration
The latter definitely applies to version 9.3.1, but it could be helpful.

Unable to access Home Hub 3.0 router

For some reason I am unable to access the router.
I normally type 192.168.1.254 into the address bar but have started getting the 'Internet Explorer cannot access the web page message'. Doesn't work on Chrome or Safari either.
This was working fine up until a couple of weeks ago - any ideas?

Hi apollo9 and welcome
Try clearing your browser cache (on all 3) or power the hub down for a minute or two, switch it back on, allow all the lights to go blue and try again.
also fwiw, bthomehub.home should work too
-+-No longer a forum member-+-

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Unable to access jar file error !

hello,
i have built my netbeans project and obtained the hequalifies.jar file . unfortunately when i'm trying to run this jar file from the prompt command I'mgetting the error: unable to access jar file
here is the command i'm typing:
C:\Users\User\Documents\NetBeansProjects\hEqUALIFIES\dist>java -jar " C:\Users\U
ser\Documents\NetBeansProjects\hEqUALIFIES\dist hequalifies.jar "
anyone has any clue?
10x!

ok i'm gonna make it easier on you.
i gess i found what is the problem but have no idea how to solve it.
when i obtained the .jar file i also obtained a README.txt file in which it is written the following phrase:
** If a library on the projects classpath also has a Class-Path element*
specified in the manifest,the content of the Class-Path element has to be on the projects runtime path.
I'M SORRY BUT I DID NOT UNDERSTAND WHAT IS MEANT BY: what is "the projects runtime path"?
the content of my manifest is:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: 10.0-b23 (Sun Microsystems Inc.)
Main-Class: hequalifies.ui.HeQualifies
Class-Path: lib/PlugIn
X-COMMENT: Main-Class will be added automatically by build
I'm having problem with lib/plugin.

Hi unable to access itune store on my itunes app all my purchased songs are there

I am unable to access the store I have credit and I can access my account history but unable to connect with store to purchase more songs

Hello, rarehope.
Thank you for visiting Apple Support Communities.
I would need more information regarding exact error messages received or exactly what issue your are experiencing in order to better assist you. However, here is an article that will help you troubleshoot issues downloading media from the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Unable to Access BI InfoSet in Crystal Reports using SAP Info sets driver

Hi,
I am looking to develop a report on top of BI InfoSet in Crystal Reports. However using the the SAP InfoSets driver I am only able to visualize 'Classic InfoSet' and 'SAP Query'. It does not show the option to import the regular InfoSet as a datasource. I am unable to access the InfoSet built by the db join on InfoCubes that is available in SAP BW System.
Can anybody help.
Thanks,
Amogh

Hi all,
i know this discussion is abaout 2 years old, but i faced a similar problem. I try to get access to the regular InfoSets (SQ02) within a direct connection between SAP and Crystal Reports. Which components and tools did i need to get a connection?
look here: http://scn.sap.com/thread/3365060
Thanx for your help!
Best Regards
David

Unable to access player in tv

Similar Messages

Maybe you are looking for