Unable to access Preferences/Advanced/Burning

iTunes 7.7.1
Every time I try to access Preferences/Advanced/Burning, the program hangs. I logged into a new user area and updated iTunes to 7.7.1 and it does the same thing.

I am sorry to hear that you aren't finding a solution to your issue.
Here's what I did when I came up with the same problem. Yes, this is an ebook that I received from my school.
I downloaded the ebook and then tried to "Open" instead of "Save". When I saved the attachment and then opened, I could open the file without the error. I received the error when I tried to Open it from the school website.
I researched the term "Trusted Manager Preference". Go to "Edit", "Preferences", "Trusted Manager", "Change Settings". Ensure that the checkbox with "Let Me Specify a list of ...". The box with "My Web Sites" has a Always Block next to the site. Type that website into the allow box, Click Allow. This will add it to the My Web site box. Delete the site that is always blocked.
This worked for me. Hopefully it will work for you.

Similar Messages

Unable to access Preference Pane! webpages corrupt!

For some odd reason, Safari will not load images and displays pages in a random mess. I am not able to access preferences either - autofill dialogue window appears in it's place.
Yes I did just to an update and then things all went wrong - I wish safari was as good as Firefox

In OS X Tiger, a small pill button can be found in the upper right corner of the Preference Panel. If you click on it, either the Preference Panel will expand or contract based on its existing appearance. Sounds like the Panel was set to its contracted state. Recreating the Preference file is one way to remedy the problem, as the default is the expanded state. The other way would have been to click on the pill button, which would have preserved your existing preference selections.
As you have reset your Preferences, make sure you reestablish any of your custom preferences both in the Preference Panels and in the View and Edit (spelling) menus. One last thing, if you open your Bookmarks Manager (command/option/B keys) you'll notice you have new Bookmark collections courtesy of the Preference reset. You can highlight/delete these if you don't want them.
Safari will not load images and displays pages in a random mess.
Is this still occurring?
Message was edited by: Hawaiian_Starman

Crashes when Accessing Edit/Preferences/Advanced/Burning

Whenever I attempt to access the path in my subject in iTunes my system crashes. I have tried uninstalling iTunes and then reinstalling it.Any thoughts?
Message was edited by: jock01

Try resetting the Bridge preferences from outside the program.
Make sure it is not running (and double-check the Task Manager to ensure a hidden copy isn't running under Processes).
Then hold down Ctrl as you start Bridge and keep it down until you get a confirmation dialog. Accept all three options.

Unable to access preferences

I'm trying to learn to use idvd 6. I want to do a slide show with music. When I go to the help menu, it tells me to go to preferences to set the 'TV safe area'. I click on IDVD, a drop down menu appears, but the first 7 choices starting with About IDVD are grayed out.
How do I fix this problem so I can access the menu choices?
rivervu
MacBook Pro Mac OS X (10.4.8)

Occasionally a file within the application gets its
permissions screwed up and locks you out. That can
affect menus as well as other functionality. First
run Disk Utility and repair disk permissions. If
that doesn't help, make a duplicate copy of the
application and try the following:
Download and run BatChmod</
a> on the iDVD application file with the settings
shown here, putting your
administartive name in the owner and group sections.
You can either type in the path to the application or
just drag the application into that
field.
Although the permissions give more to you that
normally would but it will work if that's the
problem. If it doesn't and you don't want to keep
the modified version, trash it and rename the backup
to just iDVD.app.
Do you
Twango?
Like so much in ilife the answer is simple if you know the right question to ask. I just needed to put in a completed project and save it. Then the drop down menu comes up in black, not greyed out! How simple. Blush:))))
rivervu

ITunes won't hold Preferences Advanced Burning CD setting

I have kept ITunes updated. For the first time in a couple of months I tried to burn an audio CD from songs in my library. That always worked before but won't now. I have a Macbook Pro with the same latest Itunes version and found it doesn't have the problem. I figured something was corrupt in the PC installed version and so completely uninstalled and reinstalled 7.7.1.11 That didn't help. I can set the preference for audio CD but it always gets changed to MP3.
Can anyone comment or suggest a fix?

The headers on the problem tracks may be nonstandard or corrupted (this can happen with some MP3 conversion or import utilities). If you search the web for "mp3 repair" you'll find a number of repair tools. Here's one I've seen mentioned:
VBRfix.
I haven't tried any of the versions of this, so I can't attest to how well (or indeed if) they work.
Hope this helps.

Unable to access preferences pane

I downloaded Reader 9.3 on my PC and cannot open the preference pane under the edit tab. Sound familliar?
I need to go to edit> preferences> Java Script and uncheck "Enable global object security policy" checkbox. Thing is, the preference pane will not pop-up. I tried deleting Java Script and downloaded the newest version. I deleted Adobe and downloaded the reader 9.3 again. I did the help> repair. I even tried the ReadOutLoud.api.bak trick and rebooted but that did not work either. Any other tricks to try?

I am sorry to hear that you aren't finding a solution to your issue.
Here's what I did when I came up with the same problem. Yes, this is an ebook that I received from my school.
I downloaded the ebook and then tried to "Open" instead of "Save". When I saved the attachment and then opened, I could open the file without the error. I received the error when I tried to Open it from the school website.
I researched the term "Trusted Manager Preference". Go to "Edit", "Preferences", "Trusted Manager", "Change Settings". Ensure that the checkbox with "Let Me Specify a list of ...". The box with "My Web Sites" has a Always Block next to the site. Type that website into the allow box, Click Allow. This will add it to the My Web site box. Delete the site that is always blocked.
This worked for me. Hopefully it will work for you.

Can't access Preferences in Safari 5.0.5

I have an older Mac Pro running Snow Leopard 10.6.8 and Safari 5.0.5. I've been unable to access Preferences in Safari--half the time the web page doesn't change, the other half the program crashes.
Any ideas?

I'd try opening up any Music Project, or Podcast Episode (a garageband project) and trying it. However; I can access GB Prefs while not having a project open. Might be just you, or just me. Either way, try opening up a project.

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs,

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs, excel spreadsheets,etc. It also seems to have started its own library which is not complete. My PC died this summer (I still have it though).
Now when syncing any of the multiple devices (ipods,ipads, iphones) that we have with my mac book, itunes states that "an error occurred" or the "app cannot be found". Itunes wants me to erase the device and sync with my macbook. The message "The iPhone “Renee’s iPhone” is synced with another iTunes library on “Renee PC”. Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."appears.
Any assistance would be greatly appreciated.
Renee

u can give try to using external enclosre and backup ur files. I hope u will get files back. or using external enclosre with ur hdd boot into Linux and try to mount ur harddisk.
there are multiple no of tutorial to mount apple partion in Linux.

User Preference Panes dimmed, unable to access...

I am "in charge" of our network which consists of 10 PowerMac G5s, an XServe and XRAID. We are currently running 10.4.6 throughout.
We are adding some WACOM tablets to a couple stations, but I have been unable to access the WACOM preference pane in the system preferences. The WACOM software creates a new row below the "System" row, and adds it's preference pane. When logged in as a user this pane is visible, but dimmed out. When I log in as root the preference becomes available, and I am able to tune the tablet.
I have used the latest driver, and have installed / uninstalled a few times. I have installed as root, and as a user with identical results as above.
The Workgroup Manager has NOT been configured to manage user preferences; there are three options that I see, "Never", "Once", and "Always"- "Never" is selected.
I am looking for a way to make the WACOM pane available to the user. Any thoughts?
Thanks!

Tried Repairing Permissions on the machine after installation?
I would have thought that installing as Root would be a bad idea (might cause permissions problems). An 'admin' user should be sufficient. Do 'plain' users have any restrictions set on them in their Accounts preferences?
It doesn't sound like it has anything to do with the server though, (if you are not using managed preferences). If you get no joy here (server forum) you might want to try the genera Tiger forum area.
-david

Unable to access Login Items for Accounts in System Preferences

I've created an image for computers at my school. When I go into System Preferences>Accounts, and authenticate, I am unable to access the Login Items tab. The tab isn't grayed out or anything. It's just that when I click on it, nothing happens. It stays on the Password tab. The only way I can get out of it is to quit System Preferences. Any ideas?

If you are connecting to a OS X Server, make sure that you're not managing Login Items (Click on Preferences in WorkGroup Manager, then Login, then the Items tab). I had the same problem and setting that preference to Never solved it for me.

Itunes seems to be unable to locate original file to play songs. Songs are in the itunes media file and playable direct from file. Preferences/advance file location is correct. Some files are playing and others aren't with no obvious pattern.

Itunes is unable to locate original file when attempting to play music. Songs are in the itunes media file and playable direct from there. Preferences/Advanced file location pointer is correct. Some songs play but most don't. I did move files around a bit in an attempt to share music with another account on same computor, however this did not work so have returned file to original location. Please help, I am way outside my feild in this one. Ta.

I have solved the problem. i think when I moved the media file back out of public to my account, I put it back into the wrong place and ended up with a media file inside a media file, inside another media file!! So I moved it again and fixed!! Now I just need to work out why i can't share with another account user of same computor.

Clients are unable to access a New wireless Controller 5508

Clients are unable to access the public ssid, which is wide open(or any other ssids).
I'm using LAG and I can ping each interface on the controller. Ap's show a total of 2 and 2 are up.
interface name is public vlan identifier 107, ip add 10.1.255.252, interface dynamic
Software version 7.0.98.0
Model No.
AIR-CT5508-K9
Burned-in MAC Address
50:3D:E5:1A:2F:60
Maximum number of APs supported
25
FIPS Prerequisite Mode
Disable
UDI :
Product Identifier Description
AIR-CT5508-K9
Version Identifier Description
V01
Serial Number
FCW1508L0KT
Entity Name
Chassis
Entity Description
Cisco Wireless Controller
Profile Name
Type
SSID
Status
Enabled
Security Policies
(Modifications done under security tab will appear after applying the changes.)
Radio Policy
All 802.11a only 802.11a/g only 802.11g only 802.11b/g only
Interface
jmhmanagementpublicspacelabsvoice
Broadcast SSID
Enabled
Layer 2 security none
Below is the errors that are in the controller's log.
spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-DECODE_ERR: spam_lrad.c:1932 Error decoding join request from AP 00:00:00:00:00:00
*spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-JOIN_DB_ERR: spam_lrad.c:6216 Could not allocate an entry in the database for AP 00:00:00:00:00:00 - dropping the join request (# of APs joined = 2)
*spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-AP_DB_CREATE_ERR: spam_lrad.c:4945 Unable to create an entry for AP 00:00:00:00:00:00 in the database - invalid mac address
*spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-PAYLOAD_MISSING: spam_lrad.c:5400 Join request does not contain BOARD_DATA payload
*spamApTask0: Dec 06 14:54:24.728: %LWAPP-3-DECODE_ERR: spam_lrad.c:1932 Error decoding join request from AP 00:00:00:00:00:00
*spamApTask0: Dec 06 14:54:24.728: %LWAPP-3-JOIN_DB_ERR: spam_lrad.c:6216 Could not allocate an entry in the database for AP spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-DECODE_ERR: spam_lrad.c:1932 Error decoding join request from AP 00:00:00:00:00:00
*spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-JOIN_DB_ERR: spam_lrad.c:6216 Could not allocate an entry in the database for AP 00:00:00:00:00:00 - dropping the join request (# of APs joined = 2)
*spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-AP_DB_CREATE_ERR: spam_lrad.c:4945 Unable to create an entry for AP 00:00:00:00:00:00 in the database - invalid mac address
*spamApTask0: Dec 06 14:54:43.895: %LWAPP-3-PAYLOAD_MISSING: spam_lrad.c:5400 Join request does not contain BOARD_DATA payload
*spamApTask0: Dec 06 14:54:24.728: %LWAPP-3-DECODE_ERR: spam_lrad.c:1932 Error decoding join request from AP 00:00:00:00:00:00
*spamApTask0: Dec 06 14:54:24.728: %LWAPP-3-JOIN_DB_ERR: spam_lrad.c:6216 Could not allocate an entry in the database for AP
I have attached show run-config and show running-config

For the public WLAN, what is 10.1.1.1? Is it a real DHCP server, is it a FW? If it's a FW, then you'll need to disable dhcp proxy:
CLI config dhcp proxy disable
GUI Controller > Advanced > DHCp, and uncheck the box for proxy.
As for all of your other SSID, they are all pointd at the management interface. Double check the WLAN config, and point them to the interface you want the user to get an IP address in.
HTH,
Steve
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

Unable to access Safari or read any email

Dear colleagues,
I have an iPhone 3GS, with IOS 4.3.3 After using the phone as modem with my laptop (I explain this because I don't know if it has any relation with my current problem...), now I am unable to access any of my emails accounts or browse through any webpage with Safari. I do can receive emals, I see them but, when I want to access them the screen frozens, become black and I'm pushed back to the main menu screen It happens the same with safari, after some seconds trying to upload a page, the screen becomes black and I'm again on the main menu... I tried a reset and switch off several times the iphone with no success... Any help will be greatly appreciated! Thanks in advance!

I would then do a restore. Plug in your iPad and click on Restore from iTunes. This option erases your iPad and reinstall a fresh copy of the iOS. You're saved contents would still be synced back via previous backup. Now if a restore and then a backup still doesn't resolve the issue then I would recommend doing a restore again but this time do not use the backup. The downside is that all of your app info will be lost. Things like game play levels beat, app preferences, etc.

Unable to access applications in workspace,shared services

Hi ,
I am Unable to access applications in workspace and shared services on EPM 11.1.1.3. It happened after normal shutdown/startup scripts were run.
But when I reconfigure the Weblogic web server and run the services again I can access the applications.This is happening frequently now.
Is this anything related to user profiles on the server as we are migrating these to other server.
Can any one help me with this .
Please find the Shared services log below:
<22-Oct-2010 10:25:19 o'clock BST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\bea\weblogic92\platform\lib\p13n\p13n-schemas.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_common.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_system.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_common.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_schemas.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_system.jar;D:\bea\weblogic92\platform\lib\wlp\wsrp-common.jar>
<22-Oct-2010 10:25:21 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia32 from BEA Systems, Inc.>
<22-Oct-2010 10:25:25 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
<22-Oct-2010 10:25:29 o'clock BST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
<22-Oct-2010 10:25:29 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<22-Oct-2010 10:25:30 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Hyperion\deployments\WebLogic9\servers\SharedServices9\logs\SharedServices9.log is opened. All server side log events will be written to this file.>
<22-Oct-2010 10:25:47 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Attempting to verify the database configuration
Attempting to verify the database configuration
Database configuration test passed.
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/deployments/WebLogic9/SharedServices9/config/Domain.xml}
configURL: file:///D:/Hyperion/deployments/WebLogic9/SharedServices9/config/CSS.xml
Done initialize: com.hyperion.css.CSSAPIImpl@283baf
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@27efaa
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@454a3b
CMSOfflineServlet Initialized
Adding audit listener
Shared Services Initialized Successfully
<22-Oct-2010 10:26:56 o'clock BST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<22-Oct-2010 10:26:57 o'clock BST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias hyperion from the jks keystore file D:\hyperion_SSL_Repository\hyperion.jks.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\bea\JROCKI~1\jre\lib\security\cacerts.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.86.57.43:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.87.248.108:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWHYPWEB.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "SharedServices9" for domain "WebLogic9" running in Production Mode>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWWEB026.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<22-Oct-2010 10:27:08 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:28:36 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwdbs026.uk.baa.com - 10.86.41.33 instead of an SSL handshake.>
22-Oct-2010 10:28:38, /files, HEAD, 401 "Unauthorized", 125 ms, %v
22-Oct-2010 10:28:38, /files, HEAD, 200 "OK", 266 ms, %v
22-Oct-2010 10:28:40, /files, HEAD, 401 "Unauthorized", 16 ms, %v
22-Oct-2010 10:28:41, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 200 "OK", 78 ms, %v
<22-Oct-2010 10:29:40 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:30:16 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:32:25 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
22-Oct-2010 10:32:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:43, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 200 "OK", 63 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 200 "OK", 63 ms, %v
<22-Oct-2010 10:32:46 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:34:00 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:35:28 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Populating Application Info
Getting LCM callback info from Registry for product: HUB
LCM Callback: https://LGWWEB026.uk.baa.com:28443/interop/framework/lcm/HSSMigration
Populating Product Info
Thanks in advance
Edited by: 790426 on 25-Oct-2010 06:17

You must first check if you have configured the web server to include the hfm/planning products.
Then you can refer to the thread below:
Not able to see Consolidation Administration
The latter definitely applies to version 9.3.1, but it could be helpful.

Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.

Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.
Setup includes CUCM9.0, Unity Connection 9.0, Presence 9.0....
steps taken to configure(and results acheived)
1-users created locally on CUCM and Enabled for IM and Presence.
2-able to login to clients (CUPS7/8.6 and Jabber) but getting error Voicemail Error. The server has rejected the provided credentials. [1903]
in order to verify there is nothing wrong with the credentials...i checked on unity and i am sure it's the PIN(12345) i need to use .
Can Anyone help me out here...Thanks in advance.

It's not looking for your PIN - that is only used over DTMF-based interactions - it's looking for your CUC password. If the mailbox is synced from LDAP and you have LDAP Auth enabled on CUC, then this would be your AD password. If it's synced over AXL, not synced at all, or LDAP synced but without Auth, then there will be an alphanumeric password field on the mailbox under Edit > Change Passwords.
Please remember to rate helpful responses and identify helpful or correct answers.

Unable to access Preferences/Advanced/Burning

Similar Messages

Maybe you are looking for